diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mtd/nand/nand.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/nand_util.c | 6 | ||||
| -rw-r--r-- | drivers/pci/pci.c | 68 | ||||
| -rw-r--r-- | drivers/rtc/m41t60.c | 2 |
4 files changed, 50 insertions, 28 deletions
diff --git a/drivers/mtd/nand/nand.c b/drivers/mtd/nand/nand.c index 27b5792bc..e44470eb6 100644 --- a/drivers/mtd/nand/nand.c +++ b/drivers/mtd/nand/nand.c @@ -70,7 +70,7 @@ void nand_init(void) if (nand_curr_device == -1) nand_curr_device = i; } - printf("%lu MiB\n", size / (1024 * 1024)); + printf("%u MiB\n", size / (1024 * 1024)); #ifdef CFG_NAND_SELECT_DEVICE /* diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index c82f77b55..828cc338a 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -154,7 +154,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) } if (erase_length < meminfo->erasesize) { - printf("Warning: Erase size 0x%08x smaller than one " \ + printf("Warning: Erase size 0x%08lx smaller than one " \ "erase block 0x%08x\n",erase_length, meminfo->erasesize); printf(" Erasing 0x%08x instead\n", meminfo->erasesize); erase_length = meminfo->erasesize; @@ -498,7 +498,7 @@ int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts) * on (slow) serial consoles */ if (percent != percent_complete) { - printf("\rWriting data at 0x%x " + printf("\rWriting data at 0x%lx " "-- %3d%% complete.", mtdoffset, percent); percent_complete = percent; @@ -678,7 +678,7 @@ int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts) */ if (percent != percent_complete) { if (!opts->quiet) - printf("\rReading data from 0x%x " + printf("\rReading data from 0x%lx " "-- %3d%% complete.", mtdoffset, percent); percent_complete = percent; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index b3ae3b152..16180cbe5 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -411,6 +411,40 @@ void pci_cfgfunc_do_nothing(struct pci_controller *hose, extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev); extern void pciauto_config_init(struct pci_controller *hose); +int __pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) +{ + /* + * Check if pci device should be skipped in configuration + */ + if (dev == PCI_BDF(hose->first_busno, 0, 0)) { +#if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */ + /* + * Only skip configuration if "pciconfighost" is not set + */ + if (getenv("pciconfighost") == NULL) + return 1; +#else + return 1; +#endif + } + + return 0; +} +int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) + __attribute__((weak, alias("__pci_skip_dev"))); + +#ifdef CONFIG_PCI_SCAN_SHOW +int __pci_print_dev(struct pci_controller *hose, pci_dev_t dev) +{ + if (dev == PCI_BDF(hose->first_busno, 0, 0)) + return 0; + + return 1; +} +int pci_print_dev(struct pci_controller *hose, pci_dev_t dev) + __attribute__((weak, alias("__pci_print_dev"))); +#endif /* CONFIG_PCI_SCAN_SHOW */ + int pci_hose_scan_bus(struct pci_controller *hose, int bus) { unsigned int sub_bus, found_multi=0; @@ -423,21 +457,10 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus) for (dev = PCI_BDF(bus,0,0); dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); - dev += PCI_BDF(0,0,1)) - { - /* Skip our host bridge */ - if ( dev == PCI_BDF(hose->first_busno,0,0) ) { -#if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */ - /* - * Only skip hostbridge configuration if "pciconfighost" is not set - */ - if (getenv("pciconfighost") == NULL) { - continue; /* Skip our host bridge */ - } -#else - continue; /* Skip our host bridge */ -#endif - } + dev += PCI_BDF(0,0,1)) { + + if (pci_skip_dev(hose, dev)) + continue; if (PCI_FUNC(dev) && !found_multi) continue; @@ -473,15 +496,14 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus) hose->fixup_irq(hose, dev); #ifdef CONFIG_PCI_SCAN_SHOW - /* Skip our host bridge */ - if ( dev != PCI_BDF(hose->first_busno,0,0) ) { - unsigned char int_line; + if (pci_print_dev(hose, dev)) { + unsigned char int_line; - pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE, - &int_line); - printf(" %02x %02x %04x %04x %04x %02x\n", - PCI_BUS(dev), PCI_DEV(dev), vendor, device, class, - int_line); + pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE, + &int_line); + printf(" %02x %02x %04x %04x %04x %02x\n", + PCI_BUS(dev), PCI_DEV(dev), vendor, device, class, + int_line); } #endif } diff --git a/drivers/rtc/m41t60.c b/drivers/rtc/m41t60.c index 8a32ea074..ef135cab3 100644 --- a/drivers/rtc/m41t60.c +++ b/drivers/rtc/m41t60.c @@ -241,7 +241,7 @@ void rtc_reset(void) if (l <= 0x3F) { if ((data[RTC_CTRL] & 0x3F) != l) { - printf("Setting RTC calibration to 0x%02X\n", + printf("Setting RTC calibration to 0x%02lX\n", l); data[RTC_CTRL] &= 0xC0; data[RTC_CTRL] |= (uchar) l; |