summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/gadget/Makefile8
-rw-r--r--drivers/usb/gadget/f_dfu.c43
-rw-r--r--drivers/usb/gadget/f_dfu.h2
-rw-r--r--drivers/usb/gadget/fotg210.c15
-rw-r--r--drivers/usb/host/ehci-exynos.c41
-rw-r--r--drivers/usb/host/ehci-hcd.c5
-rw-r--r--drivers/usb/host/ehci-pci.c28
7 files changed, 127 insertions, 15 deletions
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index f52d3f450..f13b172a6 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -5,12 +5,8 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# if defined(CONFIG_USB_GADGET) || defined(CONFIG_USB_ETHER)
-# Everytime you forget how crufty makefiles can get things like
-# this remind you...
-ifneq (,$(CONFIG_USB_GADGET)$(CONFIG_USB_ETHER))
-obj-y += epautoconf.o config.o usbstring.o
-endif
+obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o
+obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
# new USB gadget layer dependencies
ifdef CONFIG_USB_GADGET
diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c
index 37d04a192..a045864d7 100644
--- a/drivers/usb/gadget/f_dfu.c
+++ b/drivers/usb/gadget/f_dfu.c
@@ -40,6 +40,7 @@ struct f_dfu {
/* Send/received block number is handy for data integrity check */
int blk_seq_num;
+ unsigned int poll_timeout;
};
typedef int (*dfu_state_fn) (struct f_dfu *,
@@ -128,6 +129,33 @@ static struct usb_gadget_strings *dfu_strings[] = {
NULL,
};
+static void dfu_set_poll_timeout(struct dfu_status *dstat, unsigned int ms)
+{
+ /*
+ * The bwPollTimeout DFU_GETSTATUS request payload provides information
+ * about minimum time, in milliseconds, that the host should wait before
+ * sending a subsequent DFU_GETSTATUS request
+ *
+ * This permits the device to vary the delay depending on its need to
+ * erase or program the memory
+ *
+ */
+
+ unsigned char *p = (unsigned char *)&ms;
+
+ if (!ms || (ms & ~DFU_POLL_TIMEOUT_MASK)) {
+ dstat->bwPollTimeout[0] = 0;
+ dstat->bwPollTimeout[1] = 0;
+ dstat->bwPollTimeout[2] = 0;
+
+ return;
+ }
+
+ dstat->bwPollTimeout[0] = *p++;
+ dstat->bwPollTimeout[1] = *p++;
+ dstat->bwPollTimeout[2] = *p;
+}
+
/*-------------------------------------------------------------------------*/
static void dnload_request_complete(struct usb_ep *ep, struct usb_request *req)
@@ -157,11 +185,15 @@ static void handle_getstatus(struct usb_request *req)
break;
}
+ dfu_set_poll_timeout(dstat, 0);
+
+ if (f_dfu->poll_timeout)
+ if (!(f_dfu->blk_seq_num %
+ (dfu_get_buf_size() / DFU_USB_BUFSIZ)))
+ dfu_set_poll_timeout(dstat, f_dfu->poll_timeout);
+
/* send status response */
dstat->bStatus = f_dfu->dfu_status;
- dstat->bwPollTimeout[0] = 0;
- dstat->bwPollTimeout[1] = 0;
- dstat->bwPollTimeout[2] = 0;
dstat->bState = f_dfu->dfu_state;
dstat->iString = 0;
}
@@ -723,8 +755,9 @@ static int dfu_bind_config(struct usb_configuration *c)
f_dfu->usb_function.unbind = dfu_unbind;
f_dfu->usb_function.set_alt = dfu_set_alt;
f_dfu->usb_function.disable = dfu_disable;
- f_dfu->usb_function.strings = dfu_generic_strings,
- f_dfu->usb_function.setup = dfu_handle,
+ f_dfu->usb_function.strings = dfu_generic_strings;
+ f_dfu->usb_function.setup = dfu_handle;
+ f_dfu->poll_timeout = DFU_DEFAULT_POLL_TIMEOUT;
status = usb_add_function(c, &f_dfu->usb_function);
if (status)
diff --git a/drivers/usb/gadget/f_dfu.h b/drivers/usb/gadget/f_dfu.h
index cc2c45567..0c29954ad 100644
--- a/drivers/usb/gadget/f_dfu.h
+++ b/drivers/usb/gadget/f_dfu.h
@@ -82,4 +82,6 @@ struct dfu_function_descriptor {
__le16 wTransferSize;
__le16 bcdDFUVersion;
} __packed;
+
+#define DFU_POLL_TIMEOUT_MASK (0xFFFFFFUL)
#endif /* __F_DFU_H_ */
diff --git a/drivers/usb/gadget/fotg210.c b/drivers/usb/gadget/fotg210.c
index 6e19db15f..3acf6a1f4 100644
--- a/drivers/usb/gadget/fotg210.c
+++ b/drivers/usb/gadget/fotg210.c
@@ -245,6 +245,7 @@ static int fotg210_dma(struct fotg210_ep *ep, struct fotg210_request *req)
if (ep->id == 0) {
/* Wait until cx/ep0 fifo empty */
fotg210_cxwait(chip, CXFIFO_CXFIFOE);
+ udelay(1);
writel(DMAFIFO_CX, &regs->dma_fifo);
} else {
/* Wait until epx fifo empty */
@@ -847,6 +848,13 @@ int usb_gadget_handle_interrupts(void)
/* CX interrupts */
if (gisr & GISR_GRP0) {
st = readl(&regs->gisr0);
+ /*
+ * Write 1 and then 0 works for both W1C & RW.
+ *
+ * HW v1.11.0+: It's a W1C register (write 1 clear)
+ * HW v1.10.0-: It's a R/W register (write 0 clear)
+ */
+ writel(st & GISR0_CXABORT, &regs->gisr0);
writel(0, &regs->gisr0);
if (st & GISR0_CXERR)
@@ -873,6 +881,13 @@ int usb_gadget_handle_interrupts(void)
/* Device Status Interrupts */
if (gisr & GISR_GRP2) {
st = readl(&regs->gisr2);
+ /*
+ * Write 1 and then 0 works for both W1C & RW.
+ *
+ * HW v1.11.0+: It's a W1C register (write 1 clear)
+ * HW v1.10.0-: It's a R/W register (write 0 clear)
+ */
+ writel(st, &regs->gisr2);
writel(0, &regs->gisr2);
if (st & GISR2_RESET)
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 66b4de0b2..9356878eb 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -88,6 +88,8 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
/* Setup the EHCI host controller. */
static void setup_usb_phy(struct exynos_usb_phy *usb)
{
+ u32 hsic_ctrl;
+
set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
@@ -112,6 +114,32 @@ static void setup_usb_phy(struct exynos_usb_phy *usb)
clrbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
+
+ /* HSIC Phy Setting */
+ hsic_ctrl = (HSIC_CTRL_FORCESUSPEND |
+ HSIC_CTRL_FORCESLEEP |
+ HSIC_CTRL_SIDDQ);
+
+ clrbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
+ clrbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
+
+ hsic_ctrl = (((HSIC_CTRL_REFCLKDIV_12 & HSIC_CTRL_REFCLKDIV_MASK)
+ << HSIC_CTRL_REFCLKDIV_SHIFT)
+ | ((HSIC_CTRL_REFCLKSEL & HSIC_CTRL_REFCLKSEL_MASK)
+ << HSIC_CTRL_REFCLKSEL_SHIFT)
+ | HSIC_CTRL_UTMISWRST);
+
+ setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
+ setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
+
+ udelay(10);
+
+ clrbits_le32(&usb->hsicphyctrl1, HSIC_CTRL_PHYSWRST |
+ HSIC_CTRL_UTMISWRST);
+
+ clrbits_le32(&usb->hsicphyctrl2, HSIC_CTRL_PHYSWRST |
+ HSIC_CTRL_UTMISWRST);
+
udelay(20);
/* EHCI Ctrl setting */
@@ -125,6 +153,8 @@ static void setup_usb_phy(struct exynos_usb_phy *usb)
/* Reset the EHCI host controller. */
static void reset_usb_phy(struct exynos_usb_phy *usb)
{
+ u32 hsic_ctrl;
+
/* HOST_PHY reset */
setbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_PHYSWRST |
@@ -133,6 +163,15 @@ static void reset_usb_phy(struct exynos_usb_phy *usb)
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP);
+ /* HSIC Phy reset */
+ hsic_ctrl = (HSIC_CTRL_FORCESUSPEND |
+ HSIC_CTRL_FORCESLEEP |
+ HSIC_CTRL_SIDDQ |
+ HSIC_CTRL_PHYSWRST);
+
+ setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
+ setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
+
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
}
@@ -164,6 +203,8 @@ int ehci_hcd_init(int index, enum usb_init_type init,
setup_usb_phy(ctx->usb);
+ board_usb_init(index, init);
+
*hccr = ctx->hcd;
*hcor = (struct ehci_hcor *)((uint32_t) *hccr
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 8bd1eb8a9..17187caed 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -201,6 +201,9 @@ static int ehci_shutdown(struct ehci_ctrl *ctrl)
int i, ret = 0;
uint32_t cmd, reg;
+ if (!ctrl || !ctrl->hcor)
+ return -EINVAL;
+
cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
cmd &= ~(CMD_PSE | CMD_ASE);
ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
@@ -945,7 +948,7 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
#endif
/* Set the high address word (aka segment) for 64-bit controller */
if (ehci_readl(&ehcic[index].hccr->cr_hccparams) & 1)
- ehci_writel(ehcic[index].hcor->or_ctrldssegment, 0);
+ ehci_writel(&ehcic[index].hcor->or_ctrldssegment, 0);
qh_list = &ehcic[index].qh_list;
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 7a1ffe5e2..991b19998 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -54,9 +54,31 @@ static pci_dev_t ehci_find_class(int index)
bdf += PCI_BDF(0, 0, 1)) {
pci_read_config_dword(bdf, PCI_CLASS_REVISION,
&class);
- if ((class >> 8 == PCI_CLASS_SERIAL_USB_EHCI)
- && !index--)
- return bdf;
+ class >>= 8;
+ /*
+ * Here be dragons! In case we have multiple
+ * PCI EHCI controllers, this function will
+ * be called multiple times as well. This
+ * function will scan the PCI busses, always
+ * starting from bus 0, device 0, function 0,
+ * until it finds an USB controller. The USB
+ * stack gives us an 'index' of a controller
+ * that is currently being registered, which
+ * is a number, starting from 0 and growing
+ * in ascending order as controllers are added.
+ * To avoid probing the same controller in tne
+ * subsequent runs of this function, we will
+ * skip 'index - 1' detected controllers and
+ * report the index'th controller.
+ */
+ if (class != PCI_CLASS_SERIAL_USB_EHCI)
+ continue;
+ if (index) {
+ index--;
+ continue;
+ }
+ /* Return index'th controller. */
+ return bdf;
}
}
}
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 04:17:57 +0000