summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-hcd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ehci-hcd.c')
-rw-r--r--drivers/usb/host/ehci-hcd.c312
1 files changed, 221 insertions, 91 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 2a82a2912..392e28622 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -22,6 +22,7 @@
*/
#include <common.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
#include <usb.h>
#include <asm/io.h>
#include <malloc.h>
@@ -163,7 +164,7 @@ static int ehci_reset(void)
#ifdef CONFIG_USB_EHCI_TXFIFO_THRESH
cmd = ehci_readl(&hcor->or_txfilltuning);
- cmd &= ~TXFIFO_THRESH(0x3f);
+ cmd &= ~TXFIFO_THRESH_MASK;
cmd |= TXFIFO_THRESH(CONFIG_USB_EHCI_TXFIFO_THRESH);
ehci_writel(&hcor->or_txfilltuning, cmd);
#endif
@@ -183,10 +184,10 @@ static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz)
flush_dcache_range(addr, ALIGN(addr + sz, ARCH_DMA_MINALIGN));
idx = 0;
- while (idx < 5) {
+ while (idx < QT_BUFFER_CNT) {
td->qt_buffer[idx] = cpu_to_hc32(addr);
td->qt_buffer_hi[idx] = 0;
- next = (addr + 4096) & ~4095;
+ next = (addr + EHCI_PAGE_SIZE) & ~(EHCI_PAGE_SIZE - 1);
delta = next - addr;
if (delta >= sz)
break;
@@ -195,7 +196,7 @@ static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz)
idx++;
}
- if (idx == 5) {
+ if (idx == QT_BUFFER_CNT) {
printf("out of buffer pointers (%u bytes left)\n", sz);
return -1;
}
@@ -208,13 +209,14 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, struct devrequest *req)
{
ALLOC_ALIGN_BUFFER(struct QH, qh, 1, USB_DMA_MINALIGN);
- ALLOC_ALIGN_BUFFER(struct qTD, qtd, 3, USB_DMA_MINALIGN);
+ struct qTD *qtd;
+ int qtd_count = 0;
int qtd_counter = 0;
volatile struct qTD *vtd;
unsigned long ts;
uint32_t *tdp;
- uint32_t endpt, token, usbsts;
+ uint32_t endpt, maxpacket, token, usbsts;
uint32_t c, toggle;
uint32_t cmd;
int timeout;
@@ -229,8 +231,73 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
le16_to_cpu(req->value), le16_to_cpu(req->value),
le16_to_cpu(req->index));
+#define PKT_ALIGN 512
+ /*
+ * The USB transfer is split into qTD transfers. Eeach qTD transfer is
+ * described by a transfer descriptor (the qTD). The qTDs form a linked
+ * list with a queue head (QH).
+ *
+ * Each qTD transfer starts with a new USB packet, i.e. a packet cannot
+ * have its beginning in a qTD transfer and its end in the following
+ * one, so the qTD transfer lengths have to be chosen accordingly.
+ *
+ * Each qTD transfer uses up to QT_BUFFER_CNT data buffers, mapped to
+ * single pages. The first data buffer can start at any offset within a
+ * page (not considering the cache-line alignment issues), while the
+ * following buffers must be page-aligned. There is no alignment
+ * constraint on the size of a qTD transfer.
+ */
+ if (req != NULL)
+ /* 1 qTD will be needed for SETUP, and 1 for ACK. */
+ qtd_count += 1 + 1;
+ if (length > 0 || req == NULL) {
+ /*
+ * Determine the qTD transfer size that will be used for the
+ * data payload (not considering the first qTD transfer, which
+ * may be longer or shorter, and the final one, which may be
+ * shorter).
+ *
+ * In order to keep each packet within a qTD transfer, the qTD
+ * transfer size is aligned to PKT_ALIGN, which is a multiple of
+ * wMaxPacketSize (except in some cases for interrupt transfers,
+ * see comment in submit_int_msg()).
+ *
+ * By default, i.e. if the input buffer is aligned to PKT_ALIGN,
+ * QT_BUFFER_CNT full pages will be used.
+ */
+ int xfr_sz = QT_BUFFER_CNT;
+ /*
+ * However, if the input buffer is not aligned to PKT_ALIGN, the
+ * qTD transfer size will be one page shorter, and the first qTD
+ * data buffer of each transfer will be page-unaligned.
+ */
+ if ((uint32_t)buffer & (PKT_ALIGN - 1))
+ xfr_sz--;
+ /* Convert the qTD transfer size to bytes. */
+ xfr_sz *= EHCI_PAGE_SIZE;
+ /*
+ * Approximate by excess the number of qTDs that will be
+ * required for the data payload. The exact formula is way more
+ * complicated and saves at most 2 qTDs, i.e. a total of 128
+ * bytes.
+ */
+ qtd_count += 2 + length / xfr_sz;
+ }
+/*
+ * Threshold value based on the worst-case total size of the allocated qTDs for
+ * a mass-storage transfer of 65535 blocks of 512 bytes.
+ */
+#if CONFIG_SYS_MALLOC_LEN <= 64 + 128 * 1024
+#warning CONFIG_SYS_MALLOC_LEN may be too small for EHCI
+#endif
+ qtd = memalign(USB_DMA_MINALIGN, qtd_count * sizeof(struct qTD));
+ if (qtd == NULL) {
+ printf("unable to allocate TDs\n");
+ return -1;
+ }
+
memset(qh, 0, sizeof(struct QH));
- memset(qtd, 0, 3 * sizeof(*qtd));
+ memset(qtd, 0, qtd_count * sizeof(*qtd));
toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
@@ -245,20 +312,18 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
* - qh_overlay.qt_altnext
*/
qh->qh_link = cpu_to_hc32((uint32_t)qh_list | QH_LINK_TYPE_QH);
- c = (usb_pipespeed(pipe) != USB_SPEED_HIGH &&
- usb_pipeendpoint(pipe) == 0) ? 1 : 0;
- endpt = (8 << 28) |
- (c << 27) |
- (usb_maxpacket(dev, pipe) << 16) |
- (0 << 15) |
- (1 << 14) |
- (usb_pipespeed(pipe) << 12) |
- (usb_pipeendpoint(pipe) << 8) |
- (0 << 7) | (usb_pipedevice(pipe) << 0);
+ c = usb_pipespeed(pipe) != USB_SPEED_HIGH && !usb_pipeendpoint(pipe);
+ maxpacket = usb_maxpacket(dev, pipe);
+ endpt = QH_ENDPT1_RL(8) | QH_ENDPT1_C(c) |
+ QH_ENDPT1_MAXPKTLEN(maxpacket) | QH_ENDPT1_H(0) |
+ QH_ENDPT1_DTC(QH_ENDPT1_DTC_DT_FROM_QTD) |
+ QH_ENDPT1_EPS(usb_pipespeed(pipe)) |
+ QH_ENDPT1_ENDPT(usb_pipeendpoint(pipe)) | QH_ENDPT1_I(0) |
+ QH_ENDPT1_DEVADDR(usb_pipedevice(pipe));
qh->qh_endpt1 = cpu_to_hc32(endpt);
- endpt = (1 << 30) |
- (dev->portnr << 23) |
- (dev->parent->devnum << 16) | (0 << 8) | (0 << 0);
+ endpt = QH_ENDPT2_MULT(1) | QH_ENDPT2_PORTNUM(dev->portnr) |
+ QH_ENDPT2_HUBADDR(dev->parent->devnum) |
+ QH_ENDPT2_UFCMASK(0) | QH_ENDPT2_UFSMASK(0);
qh->qh_endpt2 = cpu_to_hc32(endpt);
qh->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
@@ -276,12 +341,13 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
*/
qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
- token = (0 << 31) |
- (sizeof(*req) << 16) |
- (0 << 15) | (0 << 12) | (3 << 10) | (2 << 8) | (0x80 << 0);
+ token = QT_TOKEN_DT(0) | QT_TOKEN_TOTALBYTES(sizeof(*req)) |
+ QT_TOKEN_IOC(0) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) |
+ QT_TOKEN_PID(QT_TOKEN_PID_SETUP) |
+ QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE);
qtd[qtd_counter].qt_token = cpu_to_hc32(token);
- if (ehci_td_buffer(&qtd[qtd_counter], req, sizeof(*req)) != 0) {
- printf("unable construct SETUP td\n");
+ if (ehci_td_buffer(&qtd[qtd_counter], req, sizeof(*req))) {
+ printf("unable to construct SETUP TD\n");
goto fail;
}
/* Update previous qTD! */
@@ -291,31 +357,71 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
}
if (length > 0 || req == NULL) {
- /*
- * Setup request qTD (3.5 in ehci-r10.pdf)
- *
- * qt_next ................ 03-00 H
- * qt_altnext ............. 07-04 H
- * qt_token ............... 0B-08 H
- *
- * [ buffer, buffer_hi ] loaded with "buffer".
- */
- qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
- qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
- token = (toggle << 31) |
- (length << 16) |
- ((req == NULL ? 1 : 0) << 15) |
- (0 << 12) |
- (3 << 10) |
- ((usb_pipein(pipe) ? 1 : 0) << 8) | (0x80 << 0);
- qtd[qtd_counter].qt_token = cpu_to_hc32(token);
- if (ehci_td_buffer(&qtd[qtd_counter], buffer, length) != 0) {
- printf("unable construct DATA td\n");
- goto fail;
- }
- /* Update previous qTD! */
- *tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]);
- tdp = &qtd[qtd_counter++].qt_next;
+ uint8_t *buf_ptr = buffer;
+ int left_length = length;
+
+ do {
+ /*
+ * Determine the size of this qTD transfer. By default,
+ * QT_BUFFER_CNT full pages can be used.
+ */
+ int xfr_bytes = QT_BUFFER_CNT * EHCI_PAGE_SIZE;
+ /*
+ * However, if the input buffer is not page-aligned, the
+ * portion of the first page before the buffer start
+ * offset within that page is unusable.
+ */
+ xfr_bytes -= (uint32_t)buf_ptr & (EHCI_PAGE_SIZE - 1);
+ /*
+ * In order to keep each packet within a qTD transfer,
+ * align the qTD transfer size to PKT_ALIGN.
+ */
+ xfr_bytes &= ~(PKT_ALIGN - 1);
+ /*
+ * This transfer may be shorter than the available qTD
+ * transfer size that has just been computed.
+ */
+ xfr_bytes = min(xfr_bytes, left_length);
+
+ /*
+ * Setup request qTD (3.5 in ehci-r10.pdf)
+ *
+ * qt_next ................ 03-00 H
+ * qt_altnext ............. 07-04 H
+ * qt_token ............... 0B-08 H
+ *
+ * [ buffer, buffer_hi ] loaded with "buffer".
+ */
+ qtd[qtd_counter].qt_next =
+ cpu_to_hc32(QT_NEXT_TERMINATE);
+ qtd[qtd_counter].qt_altnext =
+ cpu_to_hc32(QT_NEXT_TERMINATE);
+ token = QT_TOKEN_DT(toggle) |
+ QT_TOKEN_TOTALBYTES(xfr_bytes) |
+ QT_TOKEN_IOC(req == NULL) | QT_TOKEN_CPAGE(0) |
+ QT_TOKEN_CERR(3) |
+ QT_TOKEN_PID(usb_pipein(pipe) ?
+ QT_TOKEN_PID_IN : QT_TOKEN_PID_OUT) |
+ QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE);
+ qtd[qtd_counter].qt_token = cpu_to_hc32(token);
+ if (ehci_td_buffer(&qtd[qtd_counter], buf_ptr,
+ xfr_bytes)) {
+ printf("unable to construct DATA TD\n");
+ goto fail;
+ }
+ /* Update previous qTD! */
+ *tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]);
+ tdp = &qtd[qtd_counter++].qt_next;
+ /*
+ * Data toggle has to be adjusted since the qTD transfer
+ * size is not always an even multiple of
+ * wMaxPacketSize.
+ */
+ if ((xfr_bytes / maxpacket) & 1)
+ toggle ^= 1;
+ buf_ptr += xfr_bytes;
+ left_length -= xfr_bytes;
+ } while (left_length > 0);
}
if (req != NULL) {
@@ -328,12 +434,11 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
*/
qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
- token = (toggle << 31) |
- (0 << 16) |
- (1 << 15) |
- (0 << 12) |
- (3 << 10) |
- ((usb_pipein(pipe) ? 0 : 1) << 8) | (0x80 << 0);
+ token = QT_TOKEN_DT(1) | QT_TOKEN_TOTALBYTES(0) |
+ QT_TOKEN_IOC(1) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) |
+ QT_TOKEN_PID(usb_pipein(pipe) ?
+ QT_TOKEN_PID_OUT : QT_TOKEN_PID_IN) |
+ QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE);
qtd[qtd_counter].qt_token = cpu_to_hc32(token);
/* Update previous qTD! */
*tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]);
@@ -346,7 +451,8 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
flush_dcache_range((uint32_t)qh_list,
ALIGN_END_ADDR(struct QH, qh_list, 1));
flush_dcache_range((uint32_t)qh, ALIGN_END_ADDR(struct QH, qh, 1));
- flush_dcache_range((uint32_t)qtd, ALIGN_END_ADDR(struct qTD, qtd, 3));
+ flush_dcache_range((uint32_t)qtd,
+ ALIGN_END_ADDR(struct qTD, qtd, qtd_count));
/* Set async. queue head pointer. */
ehci_writel(&hcor->or_asynclistaddr, (uint32_t)qh_list);
@@ -359,10 +465,10 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
cmd |= CMD_ASE;
ehci_writel(&hcor->or_usbcmd, cmd);
- ret = handshake((uint32_t *)&hcor->or_usbsts, STD_ASS, STD_ASS,
+ ret = handshake((uint32_t *)&hcor->or_usbsts, STS_ASS, STS_ASS,
100 * 1000);
if (ret < 0) {
- printf("EHCI fail timeout STD_ASS set\n");
+ printf("EHCI fail timeout STS_ASS set\n");
goto fail;
}
@@ -377,10 +483,10 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
invalidate_dcache_range((uint32_t)qh,
ALIGN_END_ADDR(struct QH, qh, 1));
invalidate_dcache_range((uint32_t)qtd,
- ALIGN_END_ADDR(struct qTD, qtd, 3));
+ ALIGN_END_ADDR(struct qTD, qtd, qtd_count));
token = hc32_to_cpu(vtd->qt_token);
- if (!(token & 0x80))
+ if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE))
break;
WATCHDOG_RESET();
} while (get_timer(ts) < timeout);
@@ -398,50 +504,50 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
ALIGN((uint32_t)buffer + length, ARCH_DMA_MINALIGN));
/* Check that the TD processing happened */
- if (token & 0x80) {
+ if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)
printf("EHCI timed out on TD - token=%#x\n", token);
- }
/* Disable async schedule. */
cmd = ehci_readl(&hcor->or_usbcmd);
cmd &= ~CMD_ASE;
ehci_writel(&hcor->or_usbcmd, cmd);
- ret = handshake((uint32_t *)&hcor->or_usbsts, STD_ASS, 0,
+ ret = handshake((uint32_t *)&hcor->or_usbsts, STS_ASS, 0,
100 * 1000);
if (ret < 0) {
- printf("EHCI fail timeout STD_ASS reset\n");
+ printf("EHCI fail timeout STS_ASS reset\n");
goto fail;
}
token = hc32_to_cpu(qh->qh_overlay.qt_token);
- if (!(token & 0x80)) {
+ if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)) {
debug("TOKEN=%#x\n", token);
- switch (token & 0xfc) {
+ switch (QT_TOKEN_GET_STATUS(token) &
+ ~(QT_TOKEN_STATUS_SPLITXSTATE | QT_TOKEN_STATUS_PERR)) {
case 0:
- toggle = token >> 31;
+ toggle = QT_TOKEN_GET_DT(token);
usb_settoggle(dev, usb_pipeendpoint(pipe),
usb_pipeout(pipe), toggle);
dev->status = 0;
break;
- case 0x40:
+ case QT_TOKEN_STATUS_HALTED:
dev->status = USB_ST_STALLED;
break;
- case 0xa0:
- case 0x20:
+ case QT_TOKEN_STATUS_ACTIVE | QT_TOKEN_STATUS_DATBUFERR:
+ case QT_TOKEN_STATUS_DATBUFERR:
dev->status = USB_ST_BUF_ERR;
break;
- case 0x50:
- case 0x10:
+ case QT_TOKEN_STATUS_HALTED | QT_TOKEN_STATUS_BABBLEDET:
+ case QT_TOKEN_STATUS_BABBLEDET:
dev->status = USB_ST_BABBLE_DET;
break;
default:
dev->status = USB_ST_CRC_ERR;
- if ((token & 0x40) == 0x40)
+ if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_HALTED)
dev->status |= USB_ST_STALLED;
break;
}
- dev->act_len = length - ((token >> 16) & 0x7fff);
+ dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(token);
} else {
dev->act_len = 0;
debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n",
@@ -450,9 +556,11 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
ehci_readl(&hcor->or_portsc[1]));
}
+ free(qtd);
return (dev->status != USB_ST_NOT_PROC) ? 0 : -1;
fail:
+ free(qtd);
return -1;
}
@@ -499,12 +607,14 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
case USB_DT_DEVICE:
debug("USB_DT_DEVICE request\n");
srcptr = &descriptor.device;
- srclen = 0x12;
+ srclen = descriptor.device.bLength;
break;
case USB_DT_CONFIG:
debug("USB_DT_CONFIG config\n");
srcptr = &descriptor.config;
- srclen = 0x19;
+ srclen = descriptor.config.bLength +
+ descriptor.interface.bLength +
+ descriptor.endpoint.bLength;
break;
case USB_DT_STRING:
debug("USB_DT_STRING config\n");
@@ -539,7 +649,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
case USB_DT_HUB:
debug("USB_DT_HUB config\n");
srcptr = &descriptor.hub;
- srclen = 0x8;
+ srclen = descriptor.hub.bLength;
break;
default:
debug("unknown value %x\n", le16_to_cpu(req->value));
@@ -577,13 +687,13 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
if (ehci_is_TDI()) {
- switch ((reg >> 26) & 3) {
- case 0:
+ switch (PORTSC_PSPD(reg)) {
+ case PORTSC_PSPD_FS:
break;
- case 1:
+ case PORTSC_PSPD_LS:
tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8;
break;
- case 2:
+ case PORTSC_PSPD_HS:
default:
tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8;
break;
@@ -729,36 +839,40 @@ int usb_lowlevel_init(void)
uint32_t reg;
uint32_t cmd;
- if (ehci_hcd_init() != 0)
+ if (ehci_hcd_init())
return -1;
/* EHCI spec section 4.1 */
- if (ehci_reset() != 0)
+ if (ehci_reset())
return -1;
#if defined(CONFIG_EHCI_HCD_INIT_AFTER_RESET)
- if (ehci_hcd_init() != 0)
+ if (ehci_hcd_init())
return -1;
#endif
/* Set head of reclaim list */
memset(qh_list, 0, sizeof(*qh_list));
qh_list->qh_link = cpu_to_hc32((uint32_t)qh_list | QH_LINK_TYPE_QH);
- qh_list->qh_endpt1 = cpu_to_hc32((1 << 15) | (USB_SPEED_HIGH << 12));
+ qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) |
+ QH_ENDPT1_EPS(USB_SPEED_HIGH));
qh_list->qh_curtd = cpu_to_hc32(QT_NEXT_TERMINATE);
qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
- qh_list->qh_overlay.qt_token = cpu_to_hc32(0x40);
+ qh_list->qh_overlay.qt_token =
+ cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED));
reg = ehci_readl(&hccr->cr_hcsparams);
descriptor.hub.bNbrPorts = HCS_N_PORTS(reg);
printf("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
/* Port Indicators */
if (HCS_INDICATOR(reg))
- descriptor.hub.wHubCharacteristics |= 0x80;
+ put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
+ | 0x80, &descriptor.hub.wHubCharacteristics);
/* Port Power Control */
if (HCS_PPC(reg))
- descriptor.hub.wHubCharacteristics |= 0x01;
+ put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
+ | 0x01, &descriptor.hub.wHubCharacteristics);
/* Start the host controller. */
cmd = ehci_readl(&hcor->or_usbcmd);
@@ -808,7 +922,7 @@ submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
}
if (usb_pipedevice(pipe) == rootdev) {
- if (rootdev == 0)
+ if (!rootdev)
dev->speed = USB_SPEED_HIGH;
return ehci_submit_root(dev, pipe, buffer, length, setup);
}
@@ -819,8 +933,24 @@ int
submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, int interval)
{
-
debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d",
dev, pipe, buffer, length, interval);
+
+ /*
+ * Interrupt transfers requiring several transactions are not supported
+ * because bInterval is ignored.
+ *
+ * Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2
+ * <= PKT_ALIGN if several qTDs are required, while the USB
+ * specification does not constrain this for interrupt transfers. That
+ * means that ehci_submit_async() would support interrupt transfers
+ * requiring several transactions only as long as the transfer size does
+ * not require more than a single qTD.
+ */
+ if (length > usb_maxpacket(dev, pipe)) {
+ printf("%s: Interrupt transfers requiring several transactions "
+ "are not supported.\n", __func__);
+ return -1;
+ }
return ehci_submit_async(dev, pipe, buffer, length, NULL);
}
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 10:13:21 +0000