summaryrefslogtreecommitdiff
path: root/drivers/tsec.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tsec.c')
-rw-r--r--drivers/tsec.c878
1 files changed, 498 insertions, 380 deletions
diff --git a/drivers/tsec.c b/drivers/tsec.c
index 7ec565ca6..400e593ad 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -1,5 +1,4 @@
/*
- * tsec.c
* Freescale Three Speed Ethernet Controller driver
*
* This software may be used and distributed according to the
@@ -13,7 +12,6 @@
*/
#include <config.h>
-#include <mpc85xx.h>
#include <common.h>
#include <malloc.h>
#include <net.h>
@@ -27,13 +25,13 @@ DECLARE_GLOBAL_DATA_PTR;
#define TX_BUF_CNT 2
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
+static uint rxIdx; /* index of the current RX buffer */
+static uint txIdx; /* index of the current TX buffer */
typedef volatile struct rtxbd {
txbd8_t txbd[TX_BUF_CNT];
rxbd8_t rxbd[PKTBUFSRX];
-} RTXBD;
+} RTXBD;
struct tsec_info_struct {
unsigned int phyaddr;
@@ -41,12 +39,9 @@ struct tsec_info_struct {
unsigned int phyregidx;
};
-
/* The tsec_info structure contains 3 values which the
* driver uses to determine how to operate a given ethernet
- * device. For now, the structure is initialized with the
- * knowledge that all current implementations have 2 TSEC
- * devices, and one FEC. The information needed is:
+ * device. The information needed is:
* phyaddr - The address of the PHY which is attached to
* the given device.
*
@@ -56,45 +51,47 @@ struct tsec_info_struct {
*
* phyregidx - This variable specifies which ethernet device
* controls the MII Management registers which are connected
- * to the PHY. For 8540/8560, only TSEC1 (index 0) has
+ * to the PHY. For now, only TSEC1 (index 0) has
* access to the PHYs, so all of the entries have "0".
*
* The values specified in the table are taken from the board's
* config file in include/configs/. When implementing a new
* board with ethernet capability, it is necessary to define:
- * TSEC1_PHY_ADDR
- * TSEC1_PHYIDX
- * TSEC2_PHY_ADDR
- * TSEC2_PHYIDX
+ * TSECn_PHY_ADDR
+ * TSECn_PHYIDX
*
- * and for 8560:
+ * for n = 1,2,3, etc. And for FEC:
* FEC_PHY_ADDR
* FEC_PHYIDX
*/
static struct tsec_info_struct tsec_info[] = {
#if defined(CONFIG_MPC85XX_TSEC1) || defined(CONFIG_MPC83XX_TSEC1)
{TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX},
+#elif defined(CONFIG_MPC86XX_TSEC1)
+ {TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX},
#else
- { 0, 0, 0},
+ {0, 0, 0},
#endif
#if defined(CONFIG_MPC85XX_TSEC2) || defined(CONFIG_MPC83XX_TSEC2)
{TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX},
+#elif defined(CONFIG_MPC86XX_TSEC2)
+ {TSEC2_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC2_PHYIDX},
#else
- { 0, 0, 0},
+ {0, 0, 0},
#endif
#ifdef CONFIG_MPC85XX_FEC
{FEC_PHY_ADDR, 0, FEC_PHYIDX},
#else
-# if defined(CONFIG_MPC85XX_TSEC3) || defined(CONFIG_MPC83XX_TSEC3)
+#if defined(CONFIG_MPC85XX_TSEC3) || defined(CONFIG_MPC83XX_TSEC3) || defined(CONFIG_MPC86XX_TSEC3)
{TSEC3_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC3_PHYIDX},
-# else
- { 0, 0, 0},
-# endif
-# if defined(CONFIG_MPC85XX_TSEC4) || defined(CONFIG_MPC83XX_TSEC4)
- {TSEC4_PHY_ADDR, TSEC_REDUCED, TSEC4_PHYIDX},
-# else
- { 0, 0, 0},
-# endif
+#else
+ {0, 0, 0},
+#endif
+#if defined(CONFIG_MPC85XX_TSEC4) || defined(CONFIG_MPC83XX_TSEC4) || defined(CONFIG_MPC86XX_TSEC4)
+ {TSEC4_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC4_PHYIDX},
+#else
+ {0, 0, 0},
+#endif
#endif
};
@@ -110,68 +107,69 @@ static RTXBD rtx __attribute__ ((aligned(8)));
#error "rtx must be 64-bit aligned"
#endif
-static int tsec_send(struct eth_device* dev, volatile void *packet, int length);
-static int tsec_recv(struct eth_device* dev);
-static int tsec_init(struct eth_device* dev, bd_t * bd);
-static void tsec_halt(struct eth_device* dev);
-static void init_registers(volatile tsec_t *regs);
+static int tsec_send(struct eth_device *dev,
+ volatile void *packet, int length);
+static int tsec_recv(struct eth_device *dev);
+static int tsec_init(struct eth_device *dev, bd_t * bd);
+static void tsec_halt(struct eth_device *dev);
+static void init_registers(volatile tsec_t * regs);
static void startup_tsec(struct eth_device *dev);
static int init_phy(struct eth_device *dev);
void write_phy_reg(struct tsec_private *priv, uint regnum, uint value);
uint read_phy_reg(struct tsec_private *priv, uint regnum);
-struct phy_info * get_phy_info(struct eth_device *dev);
+struct phy_info *get_phy_info(struct eth_device *dev);
void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
static void adjust_link(struct eth_device *dev);
static void relocate_cmds(void);
static int tsec_miiphy_write(char *devname, unsigned char addr,
- unsigned char reg, unsigned short value);
+ unsigned char reg, unsigned short value);
static int tsec_miiphy_read(char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value);
+ unsigned char reg, unsigned short *value);
/* Initialize device structure. Returns success if PHY
* initialization succeeded (i.e. if it recognizes the PHY)
*/
-int tsec_initialize(bd_t *bis, int index, char *devname)
+int tsec_initialize(bd_t * bis, int index, char *devname)
{
- struct eth_device* dev;
+ struct eth_device *dev;
int i;
struct tsec_private *priv;
- dev = (struct eth_device*) malloc(sizeof *dev);
+ dev = (struct eth_device *)malloc(sizeof *dev);
- if(NULL == dev)
+ if (NULL == dev)
return 0;
memset(dev, 0, sizeof *dev);
- priv = (struct tsec_private *) malloc(sizeof(*priv));
+ priv = (struct tsec_private *)malloc(sizeof(*priv));
- if(NULL == priv)
+ if (NULL == priv)
return 0;
privlist[index] = priv;
- priv->regs = (volatile tsec_t *)(TSEC_BASE_ADDR + index*TSEC_SIZE);
+ priv->regs = (volatile tsec_t *)(TSEC_BASE_ADDR + index * TSEC_SIZE);
priv->phyregs = (volatile tsec_t *)(TSEC_BASE_ADDR +
- tsec_info[index].phyregidx*TSEC_SIZE);
+ tsec_info[index].phyregidx *
+ TSEC_SIZE);
priv->phyaddr = tsec_info[index].phyaddr;
priv->flags = tsec_info[index].flags;
sprintf(dev->name, devname);
dev->iobase = 0;
- dev->priv = priv;
- dev->init = tsec_init;
- dev->halt = tsec_halt;
- dev->send = tsec_send;
- dev->recv = tsec_recv;
+ dev->priv = priv;
+ dev->init = tsec_init;
+ dev->halt = tsec_halt;
+ dev->send = tsec_send;
+ dev->recv = tsec_recv;
/* Tell u-boot to get the addr from the env */
- for(i=0;i<6;i++)
+ for (i = 0; i < 6; i++)
dev->enetaddr[i] = 0;
eth_register(dev);
-
/* Reset the MAC */
priv->regs->maccfg1 |= MACCFG1_SOFT_RESET;
priv->regs->maccfg1 &= ~(MACCFG1_SOFT_RESET);
@@ -185,12 +183,12 @@ int tsec_initialize(bd_t *bis, int index, char *devname)
return init_phy(dev);
}
-
/* Initializes data structures and registers for the controller,
* and brings the interface up. Returns the link status, meaning
* that it returns success if the link is up, failure otherwise.
- * This allows u-boot to find the first active controller. */
-int tsec_init(struct eth_device* dev, bd_t * bd)
+ * This allows u-boot to find the first active controller.
+ */
+int tsec_init(struct eth_device *dev, bd_t * bd)
{
uint tempval;
char tmpbuf[MAC_ADDR_LEN];
@@ -209,12 +207,12 @@ int tsec_init(struct eth_device* dev, bd_t * bd)
/* Copy the station address into the address registers.
* Backwards, because little endian MACS are dumb */
- for(i=0;i<MAC_ADDR_LEN;i++) {
+ for (i = 0; i < MAC_ADDR_LEN; i++) {
tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i];
}
- regs->macstnaddr1 = *((uint *)(tmpbuf));
+ regs->macstnaddr1 = *((uint *) (tmpbuf));
- tempval = *((uint *)(tmpbuf +4));
+ tempval = *((uint *) (tmpbuf + 4));
regs->macstnaddr2 = tempval;
@@ -233,7 +231,6 @@ int tsec_init(struct eth_device* dev, bd_t * bd)
}
-
/* Write value to the device's PHY through the registers
* specified in priv, modifying the register specified in regnum.
* It will wait for the write to be done (or for a timeout to
@@ -243,17 +240,16 @@ void write_phy_reg(struct tsec_private *priv, uint regnum, uint value)
{
volatile tsec_t *regbase = priv->phyregs;
uint phyid = priv->phyaddr;
- int timeout=1000000;
+ int timeout = 1000000;
regbase->miimadd = (phyid << 8) | regnum;
regbase->miimcon = value;
asm("sync");
- timeout=1000000;
- while((regbase->miimind & MIIMIND_BUSY) && timeout--);
+ timeout = 1000000;
+ while ((regbase->miimind & MIIMIND_BUSY) && timeout--) ;
}
-
/* Reads register regnum on the device's PHY through the
* registers specified in priv. It lowers and raises the read
* command, and waits for the data to become valid (miimind
@@ -279,7 +275,7 @@ uint read_phy_reg(struct tsec_private *priv, uint regnum)
asm("sync");
/* Wait for the the indication that the read is done */
- while((regbase->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY)));
+ while ((regbase->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY))) ;
/* Grab the value read from the PHY */
value = regbase->miimstat;
@@ -287,7 +283,6 @@ uint read_phy_reg(struct tsec_private *priv, uint regnum)
return value;
}
-
/* Discover which PHY is attached to the device, and configure it
* properly. If the PHY is not recognized, then return 0
* (failure). Otherwise, return 1
@@ -296,32 +291,30 @@ static int init_phy(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct phy_info *curphy;
+ volatile tsec_t *regs = (volatile tsec_t *)(TSEC_BASE_ADDR);
/* Assign a Physical address to the TBI */
-
- {
- volatile tsec_t *regs = (volatile tsec_t *)(TSEC_BASE_ADDR);
- regs->tbipa = TBIPA_VALUE;
- regs = (volatile tsec_t *)(TSEC_BASE_ADDR + TSEC_SIZE);
- regs->tbipa = TBIPA_VALUE;
- asm("sync");
- }
+ regs->tbipa = TBIPA_VALUE;
+ regs = (volatile tsec_t *)(TSEC_BASE_ADDR + TSEC_SIZE);
+ regs->tbipa = TBIPA_VALUE;
+ asm("sync");
/* Reset MII (due to new addresses) */
priv->phyregs->miimcfg = MIIMCFG_RESET;
asm("sync");
priv->phyregs->miimcfg = MIIMCFG_INIT_VALUE;
asm("sync");
- while(priv->phyregs->miimind & MIIMIND_BUSY);
+ while (priv->phyregs->miimind & MIIMIND_BUSY) ;
- if(0 == relocated)
+ if (0 == relocated)
relocate_cmds();
/* Get the cmd structure corresponding to the attached
* PHY */
curphy = get_phy_info(dev);
- if(NULL == curphy) {
+ if (curphy == NULL) {
+ priv->phyinfo = NULL;
printf("%s: No PHY found\n", dev->name);
return 0;
@@ -334,49 +327,53 @@ static int init_phy(struct eth_device *dev)
return 1;
}
-
-/* Returns which value to write to the control register. */
-/* For 10/100, the value is slightly different */
-uint mii_cr_init(uint mii_reg, struct tsec_private *priv)
+/*
+ * Returns which value to write to the control register.
+ * For 10/100, the value is slightly different
+ */
+uint mii_cr_init(uint mii_reg, struct tsec_private * priv)
{
- if(priv->flags & TSEC_GIGABIT)
+ if (priv->flags & TSEC_GIGABIT)
return MIIM_CONTROL_INIT;
else
return MIIM_CR_INIT;
}
-
/* Parse the status register for link, and then do
- * auto-negotiation */
-uint mii_parse_sr(uint mii_reg, struct tsec_private *priv)
+ * auto-negotiation
+ */
+uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
{
/*
- * Wait if PHY is capable of autonegotiation and autonegotiation is not complete
+ * Wait if PHY is capable of autonegotiation and autonegotiation
+ * is not complete.
*/
mii_reg = read_phy_reg(priv, MIIM_STATUS);
- if ((mii_reg & PHY_BMSR_AUTN_ABLE) && !(mii_reg & PHY_BMSR_AUTN_COMP)) {
+ if ((mii_reg & PHY_BMSR_AUTN_ABLE)
+ && !(mii_reg & PHY_BMSR_AUTN_COMP)) {
int i = 0;
- puts ("Waiting for PHY auto negotiation to complete");
- while (!((mii_reg & PHY_BMSR_AUTN_COMP) && (mii_reg & MIIM_STATUS_LINK))) {
+ puts("Waiting for PHY auto negotiation to complete");
+ while (!((mii_reg & PHY_BMSR_AUTN_COMP)
+ && (mii_reg & MIIM_STATUS_LINK))) {
/*
* Timeout reached ?
*/
if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
- puts (" TIMEOUT !\n");
+ puts(" TIMEOUT !\n");
priv->link = 0;
- break;
+ return 0;
}
if ((i++ % 1000) == 0) {
- putc ('.');
+ putc('.');
}
- udelay (1000); /* 1 ms */
+ udelay(1000); /* 1 ms */
mii_reg = read_phy_reg(priv, MIIM_STATUS);
}
- puts (" done\n");
+ puts(" done\n");
priv->link = 1;
- udelay (500000); /* another 500 ms (results in faster booting) */
+ udelay(500000); /* another 500 ms (results in faster booting) */
} else {
priv->link = 1;
}
@@ -384,10 +381,10 @@ uint mii_parse_sr(uint mii_reg, struct tsec_private *priv)
return 0;
}
-
/* Parse the 88E1011's status register for speed and duplex
- * information */
-uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private *priv)
+ * information
+ */
+uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv)
{
uint speed;
@@ -397,88 +394,116 @@ uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private *priv)
(mii_reg & MIIM_88E1011_PHYSTAT_LINK))) {
int i = 0;
- puts ("Waiting for PHY realtime link");
+ puts("Waiting for PHY realtime link");
while (!((mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE) &&
(mii_reg & MIIM_88E1011_PHYSTAT_LINK))) {
/*
* Timeout reached ?
*/
if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
- puts (" TIMEOUT !\n");
+ puts(" TIMEOUT !\n");
priv->link = 0;
break;
}
if ((i++ % 1000) == 0) {
- putc ('.');
+ putc('.');
}
- udelay (1000); /* 1 ms */
+ udelay(1000); /* 1 ms */
mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS);
}
- puts (" done\n");
- udelay (500000); /* another 500 ms (results in faster booting) */
+ puts(" done\n");
+ udelay(500000); /* another 500 ms (results in faster booting) */
}
- if(mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
+ if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
priv->duplexity = 1;
else
priv->duplexity = 0;
- speed = (mii_reg &MIIM_88E1011_PHYSTAT_SPEED);
+ speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED);
- switch(speed) {
- case MIIM_88E1011_PHYSTAT_GBIT:
- priv->speed = 1000;
- break;
- case MIIM_88E1011_PHYSTAT_100:
- priv->speed = 100;
- break;
- default:
- priv->speed = 10;
+ switch (speed) {
+ case MIIM_88E1011_PHYSTAT_GBIT:
+ priv->speed = 1000;
+ break;
+ case MIIM_88E1011_PHYSTAT_100:
+ priv->speed = 100;
+ break;
+ default:
+ priv->speed = 10;
}
return 0;
}
-
/* Parse the cis8201's status register for speed and duplex
- * information */
-uint mii_parse_cis8201(uint mii_reg, struct tsec_private *priv)
+ * information
+ */
+uint mii_parse_cis8201(uint mii_reg, struct tsec_private * priv)
{
uint speed;
- if(mii_reg & MIIM_CIS8201_AUXCONSTAT_DUPLEX)
+ if (mii_reg & MIIM_CIS8201_AUXCONSTAT_DUPLEX)
priv->duplexity = 1;
else
priv->duplexity = 0;
speed = mii_reg & MIIM_CIS8201_AUXCONSTAT_SPEED;
- switch(speed) {
- case MIIM_CIS8201_AUXCONSTAT_GBIT:
- priv->speed = 1000;
- break;
- case MIIM_CIS8201_AUXCONSTAT_100:
- priv->speed = 100;
- break;
- default:
- priv->speed = 10;
- break;
+ switch (speed) {
+ case MIIM_CIS8201_AUXCONSTAT_GBIT:
+ priv->speed = 1000;
+ break;
+ case MIIM_CIS8201_AUXCONSTAT_100:
+ priv->speed = 100;
+ break;
+ default:
+ priv->speed = 10;
+ break;
}
return 0;
}
+/* Parse the vsc8244's status register for speed and duplex
+ * information
+ */
+uint mii_parse_vsc8244(uint mii_reg, struct tsec_private * priv)
+{
+ uint speed;
+
+ if (mii_reg & MIIM_VSC8244_AUXCONSTAT_DUPLEX)
+ priv->duplexity = 1;
+ else
+ priv->duplexity = 0;
+
+ speed = mii_reg & MIIM_VSC8244_AUXCONSTAT_SPEED;
+ switch (speed) {
+ case MIIM_VSC8244_AUXCONSTAT_GBIT:
+ priv->speed = 1000;
+ break;
+ case MIIM_VSC8244_AUXCONSTAT_100:
+ priv->speed = 100;
+ break;
+ default:
+ priv->speed = 10;
+ break;
+ }
+
+ return 0;
+}
/* Parse the DM9161's status register for speed and duplex
- * information */
-uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private *priv)
+ * information
+ */
+uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)
{
- if(mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
+ if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
priv->speed = 100;
else
priv->speed = 10;
- if(mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F))
+ if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F))
priv->duplexity = 1;
else
priv->duplexity = 0;
@@ -486,27 +511,28 @@ uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private *priv)
return 0;
}
-
-/* Hack to write all 4 PHYs with the LED values */
-uint mii_cis8204_fixled(uint mii_reg, struct tsec_private *priv)
+/*
+ * Hack to write all 4 PHYs with the LED values
+ */
+uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
{
uint phyid;
volatile tsec_t *regbase = priv->phyregs;
- int timeout=1000000;
+ int timeout = 1000000;
- for(phyid=0;phyid<4;phyid++) {
+ for (phyid = 0; phyid < 4; phyid++) {
regbase->miimadd = (phyid << 8) | mii_reg;
regbase->miimcon = MIIM_CIS8204_SLEDCON_INIT;
asm("sync");
- timeout=1000000;
- while((regbase->miimind & MIIMIND_BUSY) && timeout--);
+ timeout = 1000000;
+ while ((regbase->miimind & MIIMIND_BUSY) && timeout--) ;
}
return MIIM_CIS8204_SLEDCON_INIT;
}
-uint mii_cis8204_setmode(uint mii_reg, struct tsec_private *priv)
+uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv)
{
if (priv->flags & TSEC_REDUCED)
return MIIM_CIS8204_EPHYCON_INIT | MIIM_CIS8204_EPHYCON_RGMII;
@@ -516,8 +542,9 @@ uint mii_cis8204_setmode(uint mii_reg, struct tsec_private *priv)
/* Initialized required registers to appropriate values, zeroing
* those we don't care about (unless zero is bad, in which case,
- * choose a more appropriate value) */
-static void init_registers(volatile tsec_t *regs)
+ * choose a more appropriate value)
+ */
+static void init_registers(volatile tsec_t * regs)
{
/* Clear IEVENT */
regs->ievent = IEVENT_INIT_CLEAR;
@@ -559,55 +586,55 @@ static void init_registers(volatile tsec_t *regs)
}
-
/* Configure maccfg2 based on negotiated speed and duplex
- * reported by PHY handling code */
+ * reported by PHY handling code
+ */
static void adjust_link(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
volatile tsec_t *regs = priv->regs;
- if(priv->link) {
- if(priv->duplexity != 0)
+ if (priv->link) {
+ if (priv->duplexity != 0)
regs->maccfg2 |= MACCFG2_FULL_DUPLEX;
else
regs->maccfg2 &= ~(MACCFG2_FULL_DUPLEX);
- switch(priv->speed) {
- case 1000:
- regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF))
- | MACCFG2_GMII);
- break;
- case 100:
- case 10:
- regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF))
- | MACCFG2_MII);
+ switch (priv->speed) {
+ case 1000:
+ regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF))
+ | MACCFG2_GMII);
+ break;
+ case 100:
+ case 10:
+ regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF))
+ | MACCFG2_MII);
- /* If We're in reduced mode, we need
- * to say whether we're 10 or 100 MB.
- */
- if ((priv->speed == 100)
- && (priv->flags & TSEC_REDUCED))
- regs->ecntrl |= ECNTRL_R100;
- else
- regs->ecntrl &= ~(ECNTRL_R100);
- break;
- default:
- printf("%s: Speed was bad\n", dev->name);
- break;
+ /* If We're in reduced mode, we need
+ * to say whether we're 10 or 100 MB.
+ */
+ if ((priv->speed == 100)
+ && (priv->flags & TSEC_REDUCED))
+ regs->ecntrl |= ECNTRL_R100;
+ else
+ regs->ecntrl &= ~(ECNTRL_R100);
+ break;
+ default:
+ printf("%s: Speed was bad\n", dev->name);
+ break;
}
printf("Speed: %d, %s duplex\n", priv->speed,
- (priv->duplexity) ? "full" : "half");
+ (priv->duplexity) ? "full" : "half");
} else {
printf("%s: No link.\n", dev->name);
}
}
-
/* Set up the buffers and their descriptors, and bring up the
- * interface */
+ * interface
+ */
static void startup_tsec(struct eth_device *dev)
{
int i;
@@ -622,20 +649,21 @@ static void startup_tsec(struct eth_device *dev)
for (i = 0; i < PKTBUFSRX; i++) {
rtx.rxbd[i].status = RXBD_EMPTY;
rtx.rxbd[i].length = 0;
- rtx.rxbd[i].bufPtr = (uint)NetRxPackets[i];
+ rtx.rxbd[i].bufPtr = (uint) NetRxPackets[i];
}
- rtx.rxbd[PKTBUFSRX -1].status |= RXBD_WRAP;
+ rtx.rxbd[PKTBUFSRX - 1].status |= RXBD_WRAP;
/* Initialize the TX Buffer Descriptors */
- for(i=0; i<TX_BUF_CNT; i++) {
+ for (i = 0; i < TX_BUF_CNT; i++) {
rtx.txbd[i].status = 0;
rtx.txbd[i].length = 0;
rtx.txbd[i].bufPtr = 0;
}
- rtx.txbd[TX_BUF_CNT -1].status |= TXBD_WRAP;
+ rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP;
/* Start up the PHY */
- phy_run_commands(priv, priv->phyinfo->startup);
+ if(priv->phyinfo)
+ phy_run_commands(priv, priv->phyinfo->startup);
adjust_link(dev);
/* Enable Transmit and Receive */
@@ -650,8 +678,9 @@ static void startup_tsec(struct eth_device *dev)
/* This returns the status bits of the device. The return value
* is never checked, and this is what the 8260 driver did, so we
* do the same. Presumably, this would be zero if there were no
- * errors */
-static int tsec_send(struct eth_device* dev, volatile void *packet, int length)
+ * errors
+ */
+static int tsec_send(struct eth_device *dev, volatile void *packet, int length)
{
int i;
int result = 0;
@@ -659,24 +688,25 @@ static int tsec_send(struct eth_device* dev, volatile void *packet, int length)
volatile tsec_t *regs = priv->regs;
/* Find an empty buffer descriptor */
- for(i=0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
+ for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
if (i >= TOUT_LOOP) {
- debug ("%s: tsec: tx buffers full\n", dev->name);
+ debug("%s: tsec: tx buffers full\n", dev->name);
return result;
}
}
- rtx.txbd[txIdx].bufPtr = (uint)packet;
+ rtx.txbd[txIdx].bufPtr = (uint) packet;
rtx.txbd[txIdx].length = length;
- rtx.txbd[txIdx].status |= (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT);
+ rtx.txbd[txIdx].status |=
+ (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT);
/* Tell the DMA to go */
regs->tstat = TSTAT_CLEAR_THALT;
/* Wait for buffer to be transmitted */
- for(i=0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
+ for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
if (i >= TOUT_LOOP) {
- debug ("%s: tsec: tx error\n", dev->name);
+ debug("%s: tsec: tx error\n", dev->name);
return result;
}
}
@@ -687,13 +717,13 @@ static int tsec_send(struct eth_device* dev, volatile void *packet, int length)
return result;
}
-static int tsec_recv(struct eth_device* dev)
+static int tsec_recv(struct eth_device *dev)
{
int length;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
volatile tsec_t *regs = priv->regs;
- while(!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
+ while (!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
length = rtx.rxbd[rxIdx].length;
@@ -702,18 +732,19 @@ static int tsec_recv(struct eth_device* dev)
NetReceive(NetRxPackets[rxIdx], length - 4);
} else {
printf("Got error %x\n",
- (rtx.rxbd[rxIdx].status & RXBD_STATS));
+ (rtx.rxbd[rxIdx].status & RXBD_STATS));
}
rtx.rxbd[rxIdx].length = 0;
/* Set the wrap bit if this is the last element in the list */
- rtx.rxbd[rxIdx].status = RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0);
+ rtx.rxbd[rxIdx].status =
+ RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0);
rxIdx = (rxIdx + 1) % PKTBUFSRX;
}
- if(regs->ievent&IEVENT_BSY) {
+ if (regs->ievent & IEVENT_BSY) {
regs->ievent = IEVENT_BSY;
regs->rstat = RSTAT_CLEAR_RHALT;
}
@@ -722,9 +753,8 @@ static int tsec_recv(struct eth_device* dev)
}
-
/* Stop the interface */
-static void tsec_halt(struct eth_device* dev)
+static void tsec_halt(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
volatile tsec_t *regs = priv->regs;
@@ -732,104 +762,161 @@ static void tsec_halt(struct eth_device* dev)
regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
regs->dmactrl |= (DMACTRL_GRS | DMACTRL_GTS);
- while(!(regs->ievent & (IEVENT_GRSC | IEVENT_GTSC)));
+ while (!(regs->ievent & (IEVENT_GRSC | IEVENT_GTSC))) ;
regs->maccfg1 &= ~(MACCFG1_TX_EN | MACCFG1_RX_EN);
/* Shut down the PHY, as needed */
- phy_run_commands(priv, priv->phyinfo->shutdown);
+ if(priv->phyinfo)
+ phy_run_commands(priv, priv->phyinfo->shutdown);
}
-
struct phy_info phy_info_M88E1011S = {
0x01410c6,
"Marvell 88E1011S",
4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {0x1d, 0x1f, NULL},
- {0x1e, 0x200c, NULL},
- {0x1d, 0x5, NULL},
- {0x1e, 0x0, NULL},
- {0x1e, 0x100, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]){ /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {0x1d, 0x1f, NULL},
+ {0x1e, 0x200c, NULL},
+ {0x1d, 0x5, NULL},
+ {0x1e, 0x0, NULL},
+ {0x1e, 0x100, NULL},
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_88E1011_PHY_STATUS, miim_read,
+ &mii_parse_88E1011_psr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
};
struct phy_info phy_info_M88E1111S = {
0x01410cc,
"Marvell 88E1111S",
4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {0x1d, 0x1f, NULL},
- {0x1e, 0x200c, NULL},
- {0x1d, 0x5, NULL},
- {0x1e, 0x0, NULL},
- {0x1e, 0x100, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]){ /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {0x1d, 0x1f, NULL},
+ {0x1e, 0x200c, NULL},
+ {0x1d, 0x5, NULL},
+ {0x1e, 0x0, NULL},
+ {0x1e, 0x100, NULL},
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_88E1011_PHY_STATUS, miim_read,
+ &mii_parse_88E1011_psr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+
+static unsigned int m88e1145_setmode(uint mii_reg, struct tsec_private *priv)
+{
+ uint mii_data = read_phy_reg(priv, mii_reg);
+
+ /* Setting MIIM_88E1145_PHY_EXT_CR */
+ if (priv->flags & TSEC_REDUCED)
+ return mii_data |
+ MIIM_M88E1145_RGMII_RX_DELAY | MIIM_M88E1145_RGMII_TX_DELAY;
+ else
+ return mii_data;
+}
+
+static struct phy_info phy_info_M88E1145 = {
+ 0x01410cd,
+ "Marvell 88E1145",
+ 4,
+ (struct phy_cmd[]){ /* config */
+ /* Errata E0, E1 */
+ {29, 0x001b, NULL},
+ {30, 0x418f, NULL},
+ {29, 0x0016, NULL},
+ {30, 0xa2da, NULL},
+
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_88E1011_PHY_SCR, MIIM_88E1011_PHY_MDI_X_AUTO,
+ NULL},
+ {MIIM_88E1145_PHY_EXT_CR, 0, &m88e1145_setmode},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ {MIIM_88E1111_PHY_LED_CONTROL,
+ MIIM_88E1111_PHY_LED_DIRECT, NULL},
+ /* Read the Status */
+ {MIIM_88E1011_PHY_STATUS, miim_read,
+ &mii_parse_88E1011_psr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
};
struct phy_info phy_info_cis8204 = {
0x3f11,
"Cicada Cis8204",
6,
- (struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT, &mii_cis8204_fixled},
- {MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT, &mii_cis8204_setmode},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]){ /* config */
+ /* Override PHY config settings */
+ {MIIM_CIS8201_AUX_CONSTAT,
+ MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT,
+ &mii_cis8204_fixled},
+ {MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT,
+ &mii_cis8204_setmode},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_CIS8201_AUX_CONSTAT, miim_read,
+ &mii_parse_cis8201},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
};
/* Cicada 8201 */
@@ -837,58 +924,86 @@ struct phy_info phy_info_cis8201 = {
0xfc41,
"CIS8201",
4,
- (struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
- /* Set up the interface mode */
- {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]){ /* config */
+ /* Override PHY config settings */
+ {MIIM_CIS8201_AUX_CONSTAT,
+ MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
+ /* Set up the interface mode */
+ {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT,
+ NULL},
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_CIS8201_AUX_CONSTAT, miim_read,
+ &mii_parse_cis8201},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
+};
+struct phy_info phy_info_VSC8244 = {
+ 0x3f1b,
+ "Vitesse VSC8244",
+ 6,
+ (struct phy_cmd[]){ /* config */
+ /* Override PHY config settings */
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_VSC8244_AUX_CONSTAT, miim_read,
+ &mii_parse_vsc8244},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
};
-
struct phy_info phy_info_dm9161 = {
0x0181b88,
"Davicom DM9161E",
4,
- (struct phy_cmd[]) { /* config */
- {MIIM_CONTROL, MIIM_DM9161_CR_STOP, NULL},
- /* Do not bypass the scrambler/descrambler */
- {MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT, NULL},
- /* Clear 10BTCSR to default */
- {MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CR_INIT, NULL},
- /* Restart Auto Negotiation */
- {MIIM_CONTROL, MIIM_DM9161_CR_RSTAN, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_DM9161_SCSR, miim_read, &mii_parse_dm9161_scsr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]){ /* config */
+ {MIIM_CONTROL, MIIM_DM9161_CR_STOP, NULL},
+ /* Do not bypass the scrambler/descrambler */
+ {MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT, NULL},
+ /* Clear 10BTCSR to default */
+ {MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT,
+ NULL},
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CR_INIT, NULL},
+ /* Restart Auto Negotiation */
+ {MIIM_CONTROL, MIIM_DM9161_CR_RSTAN, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_DM9161_SCSR, miim_read,
+ &mii_parse_dm9161_scsr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
};
uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
@@ -926,24 +1041,25 @@ static struct phy_info phy_info_lxt971 = {
0x0001378e,
"LXT971",
4,
- (struct phy_cmd []) { /* config */
- { MIIM_CR, MIIM_CR_INIT, mii_cr_init }, /* autonegotiate */
- { miim_end, }
- },
- (struct phy_cmd []) { /* startup - enable interrupts */
- /* { 0x12, 0x00f2, NULL }, */
- { MIIM_STATUS, miim_read, NULL },
- { MIIM_STATUS, miim_read, &mii_parse_sr },
- { MIIM_LXT971_SR2, miim_read, &mii_parse_lxt971_sr2 },
- { miim_end, }
- },
- (struct phy_cmd []) { /* shutdown - disable interrupts */
- { miim_end, }
- },
+ (struct phy_cmd[]){ /* config */
+ {MIIM_CR, MIIM_CR_INIT, mii_cr_init}, /* autonegotiate */
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup - enable interrupts */
+ /* { 0x12, 0x00f2, NULL }, */
+ {MIIM_STATUS, miim_read, NULL},
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ {MIIM_LXT971_SR2, miim_read, &mii_parse_lxt971_sr2},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown - disable interrupts */
+ {miim_end,}
+ },
};
/* Parse the DP83865's link and auto-neg status register for speed and duplex
- * information */
+ * information
+ */
uint mii_parse_dp83865_lanr(uint mii_reg, struct tsec_private *priv)
{
switch (mii_reg & MIIM_DP83865_SPD_MASK) {
@@ -974,22 +1090,23 @@ struct phy_info phy_info_dp83865 = {
0x20005c7,
"NatSemi DP83865",
4,
- (struct phy_cmd[]) { /* config */
- {MIIM_CONTROL, MIIM_DP83865_CR_INIT, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the link and auto-neg status */
- {MIIM_DP83865_LANR, miim_read, &mii_parse_dp83865_lanr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
+ (struct phy_cmd[]){ /* config */
+ {MIIM_CONTROL, MIIM_DP83865_CR_INIT, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the link and auto-neg status */
+ {MIIM_DP83865_LANR, miim_read,
+ &mii_parse_dp83865_lanr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]){ /* shutdown */
+ {miim_end,}
+ },
};
struct phy_info *phy_info[] = {
@@ -999,17 +1116,19 @@ struct phy_info *phy_info[] = {
&phy_info_cis8204,
&phy_info_M88E1011S,
&phy_info_M88E1111S,
+ &phy_info_M88E1145,
&phy_info_dm9161,
&phy_info_lxt971,
+ &phy_info_VSC8244,
&phy_info_dp83865,
NULL
};
-
/* Grab the identifier of the device's PHY, and search through
* all of the known PHYs to see if one matches. If so, return
- * it, if not, return NULL */
-struct phy_info * get_phy_info(struct eth_device *dev)
+ * it, if not, return NULL
+ */
+struct phy_info *get_phy_info(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
uint phy_reg, phy_ID;
@@ -1026,13 +1145,12 @@ struct phy_info * get_phy_info(struct eth_device *dev)
/* loop through all the known PHY types, and find one that */
/* matches the ID we read from the PHY. */
- for(i=0; phy_info[i]; i++) {
- if(phy_info[i]->id == (phy_ID >> phy_info[i]->shift))
+ for (i = 0; phy_info[i]; i++) {
+ if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift))
theInfo = phy_info[i];
}
- if(theInfo == NULL)
- {
+ if (theInfo == NULL) {
printf("%s: PHY id %x is not supported!\n", dev->name, phy_ID);
return NULL;
} else {
@@ -1042,9 +1160,9 @@ struct phy_info * get_phy_info(struct eth_device *dev)
return theInfo;
}
-
/* Execute the given series of commands on the given device's
- * PHY, running functions as necessary*/
+ * PHY, running functions as necessary
+ */
void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
{
int i;
@@ -1055,18 +1173,18 @@ void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
phyregs->miimcfg = MIIMCFG_INIT_VALUE;
- while(phyregs->miimind & MIIMIND_BUSY);
+ while (phyregs->miimind & MIIMIND_BUSY) ;
- for(i=0;cmd->mii_reg != miim_end;i++) {
- if(cmd->mii_data == miim_read) {
+ for (i = 0; cmd->mii_reg != miim_end; i++) {
+ if (cmd->mii_data == miim_read) {
result = read_phy_reg(priv, cmd->mii_reg);
- if(cmd->funct != NULL)
- (*(cmd->funct))(result, priv);
+ if (cmd->funct != NULL)
+ (*(cmd->funct)) (result, priv);
} else {
- if(cmd->funct != NULL)
- result = (*(cmd->funct))(cmd->mii_reg, priv);
+ if (cmd->funct != NULL)
+ result = (*(cmd->funct)) (cmd->mii_reg, priv);
else
result = cmd->mii_data;
@@ -1077,37 +1195,38 @@ void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
}
}
-
/* Relocate the function pointers in the phy cmd lists */
static void relocate_cmds(void)
{
struct phy_cmd **cmdlistptr;
struct phy_cmd *cmd;
- int i,j,k;
+ int i, j, k;
- for(i=0; phy_info[i]; i++) {
+ for (i = 0; phy_info[i]; i++) {
/* First thing's first: relocate the pointers to the
* PHY command structures (the structs were done) */
- phy_info[i] = (struct phy_info *) ((uint)phy_info[i]
- + gd->reloc_off);
+ phy_info[i] = (struct phy_info *)((uint) phy_info[i]
+ + gd->reloc_off);
phy_info[i]->name += gd->reloc_off;
phy_info[i]->config =
- (struct phy_cmd *)((uint)phy_info[i]->config
- + gd->reloc_off);
+ (struct phy_cmd *)((uint) phy_info[i]->config
+ + gd->reloc_off);
phy_info[i]->startup =
- (struct phy_cmd *)((uint)phy_info[i]->startup
- + gd->reloc_off);
+ (struct phy_cmd *)((uint) phy_info[i]->startup
+ + gd->reloc_off);
phy_info[i]->shutdown =
- (struct phy_cmd *)((uint)phy_info[i]->shutdown
- + gd->reloc_off);
+ (struct phy_cmd *)((uint) phy_info[i]->shutdown
+ + gd->reloc_off);
cmdlistptr = &phy_info[i]->config;
- j=0;
- for(;cmdlistptr <= &phy_info[i]->shutdown;cmdlistptr++) {
- k=0;
- for(cmd=*cmdlistptr;cmd->mii_reg != miim_end;cmd++) {
+ j = 0;
+ for (; cmdlistptr <= &phy_info[i]->shutdown; cmdlistptr++) {
+ k = 0;
+ for (cmd = *cmdlistptr;
+ cmd->mii_reg != miim_end;
+ cmd++) {
/* Only relocate non-NULL pointers */
- if(cmd->funct)
+ if (cmd->funct)
cmd->funct += gd->reloc_off;
k++;
@@ -1119,16 +1238,15 @@ static void relocate_cmds(void)
relocated = 1;
}
-
#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) \
&& !defined(BITBANGMII)
-struct tsec_private * get_priv_for_phy(unsigned char phyaddr)
+struct tsec_private *get_priv_for_phy(unsigned char phyaddr)
{
int i;
- for(i=0;i<MAXCONTROLLERS;i++) {
- if(privlist[i]->phyaddr == phyaddr)
+ for (i = 0; i < MAXCONTROLLERS; i++) {
+ if (privlist[i]->phyaddr == phyaddr)
return privlist[i];
}
@@ -1142,12 +1260,12 @@ struct tsec_private * get_priv_for_phy(unsigned char phyaddr)
* 0 on success
*/
static int tsec_miiphy_read(char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value)
+ unsigned char reg, unsigned short *value)
{
unsigned short ret;
struct tsec_private *priv = get_priv_for_phy(addr);
- if(NULL == priv) {
+ if (NULL == priv) {
printf("Can't read PHY at address %d\n", addr);
return -1;
}
@@ -1165,11 +1283,11 @@ static int tsec_miiphy_read(char *devname, unsigned char addr,
* 0 on success
*/
static int tsec_miiphy_write(char *devname, unsigned char addr,
- unsigned char reg, unsigned short value)
+ unsigned char reg, unsigned short value)
{
struct tsec_private *priv = get_priv_for_phy(addr);
- if(NULL == priv) {
+ if (NULL == priv) {
printf("Can't write PHY at address %d\n", addr);
return -1;
}
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 17:07:01 +0000