diff options
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/Makefile | 1 | ||||
| -rw-r--r-- | drivers/spi/exynos_spi.c | 367 | ||||
| -rw-r--r-- | drivers/spi/omap3_spi.c | 76 | ||||
| -rw-r--r-- | drivers/spi/omap3_spi.h | 1 |
4 files changed, 413 insertions, 32 deletions
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index f0b82c67f..824d357d9 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -34,6 +34,7 @@ COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o COBJS-$(CONFIG_CF_SPI) += cf_spi.o COBJS-$(CONFIG_CF_QSPI) += cf_qspi.o COBJS-$(CONFIG_DAVINCI_SPI) += davinci_spi.o +COBJS-$(CONFIG_EXYNOS_SPI) += exynos_spi.o COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c new file mode 100644 index 000000000..3e6c18f87 --- /dev/null +++ b/drivers/spi/exynos_spi.c @@ -0,0 +1,367 @@ +/* + * (C) Copyright 2012 SAMSUNG Electronics + * Padmavathi Venna <padma.v@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <spi.h> +#include <asm/arch/clk.h> +#include <asm/arch/clock.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch-exynos/spi.h> +#include <asm/io.h> + +/* Information about each SPI controller */ +struct spi_bus { + enum periph_id periph_id; + s32 frequency; /* Default clock frequency, -1 for none */ + struct exynos_spi *regs; + int inited; /* 1 if this bus is ready for use */ +}; + +/* A list of spi buses that we know about */ +static struct spi_bus spi_bus[EXYNOS5_SPI_NUM_CONTROLLERS]; + +struct exynos_spi_slave { + struct spi_slave slave; + struct exynos_spi *regs; + unsigned int freq; /* Default frequency */ + unsigned int mode; + enum periph_id periph_id; /* Peripheral ID for this device */ + unsigned int fifo_size; +}; + +static struct spi_bus *spi_get_bus(unsigned dev_index) +{ + if (dev_index < EXYNOS5_SPI_NUM_CONTROLLERS) + return &spi_bus[dev_index]; + debug("%s: invalid bus %d", __func__, dev_index); + + return NULL; +} + +static inline struct exynos_spi_slave *to_exynos_spi(struct spi_slave *slave) +{ + return container_of(slave, struct exynos_spi_slave, slave); +} + +/** + * Setup the driver private data + * + * @param bus ID of the bus that the slave is attached to + * @param cs ID of the chip select connected to the slave + * @param max_hz Required spi frequency + * @param mode Required spi mode (clk polarity, clk phase and + * master or slave) + * @return new device or NULL + */ +struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct exynos_spi_slave *spi_slave; + struct spi_bus *bus; + + if (!spi_cs_is_valid(busnum, cs)) { + debug("%s: Invalid bus/chip select %d, %d\n", __func__, + busnum, cs); + return NULL; + } + + spi_slave = malloc(sizeof(*spi_slave)); + if (!spi_slave) { + debug("%s: Could not allocate spi_slave\n", __func__); + return NULL; + } + + bus = &spi_bus[busnum]; + spi_slave->slave.bus = busnum; + spi_slave->slave.cs = cs; + spi_slave->regs = bus->regs; + spi_slave->mode = mode; + spi_slave->periph_id = bus->periph_id; + if (bus->periph_id == PERIPH_ID_SPI1 || + bus->periph_id == PERIPH_ID_SPI2) + spi_slave->fifo_size = 64; + else + spi_slave->fifo_size = 256; + + spi_slave->freq = bus->frequency; + if (max_hz) + spi_slave->freq = min(max_hz, spi_slave->freq); + + return &spi_slave->slave; +} + +/** + * Free spi controller + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +void spi_free_slave(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + + free(spi_slave); +} + +/** + * Flush spi tx, rx fifos and reset the SPI controller + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +static void spi_flush_fifo(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + struct exynos_spi *regs = spi_slave->regs; + + clrsetbits_le32(®s->ch_cfg, SPI_CH_HS_EN, SPI_CH_RST); + clrbits_le32(®s->ch_cfg, SPI_CH_RST); + setbits_le32(®s->ch_cfg, SPI_TX_CH_ON | SPI_RX_CH_ON); +} + +/** + * Initialize the spi base registers, set the required clock frequency and + * initialize the gpios + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + * @return zero on success else a negative value + */ +int spi_claim_bus(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + struct exynos_spi *regs = spi_slave->regs; + u32 reg = 0; + int ret; + + ret = set_spi_clk(spi_slave->periph_id, + spi_slave->freq); + if (ret < 0) { + debug("%s: Failed to setup spi clock\n", __func__); + return ret; + } + + exynos_pinmux_config(spi_slave->periph_id, PINMUX_FLAG_NONE); + + spi_flush_fifo(slave); + + reg = readl(®s->ch_cfg); + reg &= ~(SPI_CH_CPHA_B | SPI_CH_CPOL_L); + + if (spi_slave->mode & SPI_CPHA) + reg |= SPI_CH_CPHA_B; + + if (spi_slave->mode & SPI_CPOL) + reg |= SPI_CH_CPOL_L; + + writel(reg, ®s->ch_cfg); + writel(SPI_FB_DELAY_180, ®s->fb_clk); + + return 0; +} + +/** + * Reset the spi H/W and flush the tx and rx fifos + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +void spi_release_bus(struct spi_slave *slave) +{ + spi_flush_fifo(slave); +} + +static void spi_get_fifo_levels(struct exynos_spi *regs, + int *rx_lvl, int *tx_lvl) +{ + uint32_t spi_sts = readl(®s->spi_sts); + + *rx_lvl = (spi_sts >> SPI_RX_LVL_OFFSET) & SPI_FIFO_LVL_MASK; + *tx_lvl = (spi_sts >> SPI_TX_LVL_OFFSET) & SPI_FIFO_LVL_MASK; +} + +/** + * If there's something to transfer, do a software reset and set a + * transaction size. + * + * @param regs SPI peripheral registers + * @param count Number of bytes to transfer + */ +static void spi_request_bytes(struct exynos_spi *regs, int count) +{ + assert(count && count < (1 << 16)); + setbits_le32(®s->ch_cfg, SPI_CH_RST); + clrbits_le32(®s->ch_cfg, SPI_CH_RST); + writel(count | SPI_PACKET_CNT_EN, ®s->pkt_cnt); +} + +static void spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo, + void **dinp, void const **doutp) +{ + struct exynos_spi *regs = spi_slave->regs; + uchar *rxp = *dinp; + const uchar *txp = *doutp; + int rx_lvl, tx_lvl; + uint out_bytes, in_bytes; + + out_bytes = in_bytes = todo; + + /* + * If there's something to send, do a software reset and set a + * transaction size. + */ + spi_request_bytes(regs, todo); + + /* + * Bytes are transmitted/received in pairs. Wait to receive all the + * data because then transmission will be done as well. + */ + while (in_bytes) { + int temp; + + /* Keep the fifos full/empty. */ + spi_get_fifo_levels(regs, &rx_lvl, &tx_lvl); + if (tx_lvl < spi_slave->fifo_size && out_bytes) { + temp = txp ? *txp++ : 0xff; + writel(temp, ®s->tx_data); + out_bytes--; + } + if (rx_lvl > 0 && in_bytes) { + temp = readl(®s->rx_data); + if (rxp) + *rxp++ = temp; + in_bytes--; + } + } + *dinp = rxp; + *doutp = txp; +} + +/** + * Transfer and receive data + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + * @param bitlen No of bits to tranfer or receive + * @param dout Pointer to transfer buffer + * @param din Pointer to receive buffer + * @param flags Flags for transfer begin and end + * @return zero on success else a negative value + */ +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + int upto, todo; + int bytelen; + + /* spi core configured to do 8 bit transfers */ + if (bitlen % 8) { + debug("Non byte aligned SPI transfer.\n"); + return -1; + } + + /* Start the transaction, if necessary. */ + if ((flags & SPI_XFER_BEGIN)) + spi_cs_activate(slave); + + /* Exynos SPI limits each transfer to 65535 bytes */ + bytelen = bitlen / 8; + for (upto = 0; upto < bytelen; upto += todo) { + todo = min(bytelen - upto, (1 << 16) - 1); + spi_rx_tx(spi_slave, todo, &din, &dout); + } + + /* Stop the transaction, if necessary. */ + if ((flags & SPI_XFER_END)) + spi_cs_deactivate(slave); + + return 0; +} + +/** + * Validates the bus and chip select numbers + * + * @param bus ID of the bus that the slave is attached to + * @param cs ID of the chip select connected to the slave + * @return one on success else zero + */ +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return spi_get_bus(bus) && cs == 0; +} + +/** + * Activate the CS by driving it LOW + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +void spi_cs_activate(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + + clrbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT); + debug("Activate CS, bus %d\n", spi_slave->slave.bus); +} + +/** + * Deactivate the CS by driving it HIGH + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +void spi_cs_deactivate(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + + setbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT); + debug("Deactivate CS, bus %d\n", spi_slave->slave.bus); +} + +static inline struct exynos_spi *get_spi_base(int dev_index) +{ + if (dev_index < 3) + return (struct exynos_spi *)samsung_get_base_spi() + dev_index; + else + return (struct exynos_spi *)samsung_get_base_spi_isp() + + (dev_index - 3); +} + +/* Sadly there is no error return from this function */ +void spi_init(void) +{ + int i; + struct spi_bus *bus; + + for (i = 0; i < EXYNOS5_SPI_NUM_CONTROLLERS; i++) { + bus = &spi_bus[i]; + bus->regs = get_spi_base(i); + bus->periph_id = PERIPH_ID_SPI0 + i; + + /* Although Exynos5 supports upto 50Mhz speed, + * we are setting it to 10Mhz for safe side + */ + bus->frequency = 10000000; + bus->inited = 1; + } +} diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c index 6791a7e0e..344d5b8a7 100644 --- a/drivers/spi/omap3_spi.c +++ b/drivers/spi/omap3_spi.c @@ -57,6 +57,20 @@ static void spi_reset(struct omap3_spi_slave *ds) writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, &ds->regs->wakeupenable); } +static void omap3_spi_write_chconf(struct omap3_spi_slave *ds, int val) +{ + writel(val, &ds->regs->channel[ds->slave.cs].chconf); + /* Flash post writes to make immediate effect */ + readl(&ds->regs->channel[ds->slave.cs].chconf); +} + +static void omap3_spi_set_enable(struct omap3_spi_slave *ds, int enable) +{ + writel(enable, &ds->regs->channel[ds->slave.cs].chctrl); + /* Flash post writes to make immediate effect */ + readl(&ds->regs->channel[ds->slave.cs].chctrl); +} + void spi_init() { /* do nothing */ @@ -212,7 +226,7 @@ int spi_claim_bus(struct spi_slave *slave) /* Transmit & receive mode */ conf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; - writel(conf, &ds->regs->channel[ds->slave.cs].chconf); + omap3_spi_write_chconf(ds,conf); return 0; } @@ -233,14 +247,13 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp, int timeout = SPI_WAIT_TIMEOUT; int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf); - if (flags & SPI_XFER_BEGIN) - writel(OMAP3_MCSPI_CHCTRL_EN, - &ds->regs->channel[ds->slave.cs].chctrl); + /* Enable the channel */ + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN); chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY; chconf |= OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); + omap3_spi_write_chconf(ds,chconf); for (i = 0; i < len; i++) { /* wait till TX register is empty (TXS == 1) */ @@ -256,15 +269,17 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp, writel(txp[i], &ds->regs->channel[ds->slave.cs].tx); } + /* wait to finish of transfer */ + while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) & + OMAP3_MCSPI_CHSTAT_EOT)); + + /* Disable the channel otherwise the next immediate RX will get affected */ + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS); + if (flags & SPI_XFER_END) { - /* wait to finish of transfer */ - while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) & - OMAP3_MCSPI_CHSTAT_EOT)); chconf &= ~OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); - - writel(0, &ds->regs->channel[ds->slave.cs].chctrl); + omap3_spi_write_chconf(ds,chconf); } return 0; } @@ -277,14 +292,13 @@ int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp, int timeout = SPI_WAIT_TIMEOUT; int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf); - if (flags & SPI_XFER_BEGIN) - writel(OMAP3_MCSPI_CHCTRL_EN, - &ds->regs->channel[ds->slave.cs].chctrl); + /* Enable the channel */ + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN); chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY; chconf |= OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); + omap3_spi_write_chconf(ds,chconf); writel(0, &ds->regs->channel[ds->slave.cs].tx); @@ -298,15 +312,18 @@ int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp, return -1; } } + + /* Disable the channel to prevent furher receiving */ + if(i == (len - 1)) + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS); + /* Read the data */ rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx); } if (flags & SPI_XFER_END) { chconf &= ~OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); - - writel(0, &ds->regs->channel[ds->slave.cs].chctrl); + omap3_spi_write_chconf(ds,chconf); } return 0; @@ -323,14 +340,12 @@ int omap3_spi_txrx(struct spi_slave *slave, int i=0; /*Enable SPI channel*/ - if (flags & SPI_XFER_BEGIN) - writel(OMAP3_MCSPI_CHCTRL_EN, - &ds->regs->channel[ds->slave.cs].chctrl); + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN); /*set TRANSMIT-RECEIVE Mode*/ chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; chconf |= OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); + omap3_spi_write_chconf(ds,chconf); /*Shift in and out 1 byte at time*/ for (i=0; i < len; i++){ @@ -359,13 +374,13 @@ int omap3_spi_txrx(struct spi_slave *slave, /* Read the data */ rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx); } + /* Disable the channel */ + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS); /*if transfer must be terminated disable the channel*/ if (flags & SPI_XFER_END) { chconf &= ~OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); - - writel(0, &ds->regs->channel[ds->slave.cs].chctrl); + omap3_spi_write_chconf(ds,chconf); } return 0; @@ -389,17 +404,14 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf); if (flags & SPI_XFER_BEGIN) { - writel(OMAP3_MCSPI_CHCTRL_EN, - &ds->regs->channel[ds->slave.cs].chctrl); + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN); chconf |= OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, - &ds->regs->channel[ds->slave.cs].chconf); + omap3_spi_write_chconf(ds,chconf); } if (flags & SPI_XFER_END) { chconf &= ~OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, - &ds->regs->channel[ds->slave.cs].chconf); - writel(0, &ds->regs->channel[ds->slave.cs].chctrl); + omap3_spi_write_chconf(ds,chconf); + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS); } ret = 0; } else { diff --git a/drivers/spi/omap3_spi.h b/drivers/spi/omap3_spi.h index bffa43cb6..5e00208c5 100644 --- a/drivers/spi/omap3_spi.h +++ b/drivers/spi/omap3_spi.h @@ -99,6 +99,7 @@ struct mcspi { #define OMAP3_MCSPI_CHSTAT_EOT (1 << 2) #define OMAP3_MCSPI_CHCTRL_EN (1 << 0) +#define OMAP3_MCSPI_CHCTRL_DIS (0 << 0) #define OMAP3_MCSPI_WAKEUPENABLE_WKEN (1 << 0) |