diff options
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/pmic/Makefile | 2 | ||||
| -rw-r--r-- | drivers/power/pmic/pmic_tps65217.c | 109 | ||||
| -rw-r--r-- | drivers/power/pmic/pmic_tps65910.c | 83 |
3 files changed, 194 insertions, 0 deletions
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile index f05447055..11b3d030e 100644 --- a/drivers/power/pmic/Makefile +++ b/drivers/power/pmic/Makefile @@ -13,6 +13,8 @@ COBJS-$(CONFIG_POWER_MAX8998) += pmic_max8998.o COBJS-$(CONFIG_POWER_MAX8997) += pmic_max8997.o COBJS-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o COBJS-$(CONFIG_POWER_MAX77686) += pmic_max77686.o +COBJS-$(CONFIG_POWER_TPS65217) += pmic_tps65217.o +COBJS-$(CONFIG_POWER_TPS65910) += pmic_tps65910.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/power/pmic/pmic_tps65217.c b/drivers/power/pmic/pmic_tps65217.c new file mode 100644 index 000000000..36e9024bf --- /dev/null +++ b/drivers/power/pmic/pmic_tps65217.c @@ -0,0 +1,109 @@ +/* + * (C) Copyright 2011-2013 + * Texas Instruments, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <power/tps65217.h> + +/** + * tps65217_reg_read() - Generic function that can read a TPS65217 register + * @src_reg: Source register address + * @src_val: Address of destination variable + * @return: 0 for success, not 0 on failure. + */ +int tps65217_reg_read(uchar src_reg, uchar *src_val) +{ + return i2c_read(TPS65217_CHIP_PM, src_reg, 1, src_val, 1); +} + +/** + * tps65217_reg_write() - Generic function that can write a TPS65217 PMIC + * register or bit field regardless of protection + * level. + * + * @prot_level: Register password protection. Use + * TPS65217_PROT_LEVEL_NONE, + * TPS65217_PROT_LEVEL_1 or TPS65217_PROT_LEVEL_2 + * @dest_reg: Register address to write. + * @dest_val: Value to write. + * @mask: Bit mask (8 bits) to be applied. Function will only + * change bits that are set in the bit mask. + * + * @return: 0 for success, not 0 on failure, as per the i2c API + */ +int tps65217_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val, + uchar mask) +{ + uchar read_val; + uchar xor_reg; + int ret; + + /* + * If we are affecting only a bit field, read dest_reg and apply the + * mask + */ + if (mask != TPS65217_MASK_ALL_BITS) { + ret = i2c_read(TPS65217_CHIP_PM, dest_reg, 1, &read_val, 1); + if (ret) + return ret; + read_val &= (~mask); + read_val |= (dest_val & mask); + dest_val = read_val; + } + + if (prot_level > 0) { + xor_reg = dest_reg ^ TPS65217_PASSWORD_UNLOCK; + ret = i2c_write(TPS65217_CHIP_PM, TPS65217_PASSWORD, 1, + &xor_reg, 1); + if (ret) + return ret; + } + + ret = i2c_write(TPS65217_CHIP_PM, dest_reg, 1, &dest_val, 1); + if (ret) + return ret; + + if (prot_level == TPS65217_PROT_LEVEL_2) { + ret = i2c_write(TPS65217_CHIP_PM, TPS65217_PASSWORD, 1, + &xor_reg, 1); + if (ret) + return ret; + + ret = i2c_write(TPS65217_CHIP_PM, dest_reg, 1, &dest_val, 1); + if (ret) + return ret; + } + + return 0; +} + +/** + * tps65217_voltage_update() - Function to change a voltage level, as this + * is a multi-step process. + * @dc_cntrl_reg: DC voltage control register to change. + * @volt_sel: New value for the voltage register + * @return: 0 for success, not 0 on failure. + */ +int tps65217_voltage_update(uchar dc_cntrl_reg, uchar volt_sel) +{ + if ((dc_cntrl_reg != TPS65217_DEFDCDC1) && + (dc_cntrl_reg != TPS65217_DEFDCDC2) && + (dc_cntrl_reg != TPS65217_DEFDCDC3)) + return 1; + + /* set voltage level */ + if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, dc_cntrl_reg, volt_sel, + TPS65217_MASK_ALL_BITS)) + return 1; + + /* set GO bit to initiate voltage transition */ + if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, TPS65217_DEFSLEW, + TPS65217_DCDC_GO, TPS65217_DCDC_GO)) + return 1; + + return 0; +} diff --git a/drivers/power/pmic/pmic_tps65910.c b/drivers/power/pmic/pmic_tps65910.c new file mode 100644 index 000000000..7ee1160e0 --- /dev/null +++ b/drivers/power/pmic/pmic_tps65910.c @@ -0,0 +1,83 @@ +/* + * (C) Copyright 2011-2013 + * Texas Instruments, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <power/tps65910.h> + +/* + * tps65910_set_i2c_control() - Set the TPS65910 to be controlled via the I2C + * interface. + * @return: 0 on success, not 0 on failure + */ +int tps65910_set_i2c_control(void) +{ + int ret; + uchar buf; + + /* VDD1/2 voltage selection register access by control i/f */ + ret = i2c_read(TPS65910_CTRL_I2C_ADDR, TPS65910_DEVCTRL_REG, 1, + &buf, 1); + + if (ret) + return ret; + + buf |= TPS65910_DEVCTRL_REG_SR_CTL_I2C_SEL_CTL_I2C; + + return i2c_write(TPS65910_CTRL_I2C_ADDR, TPS65910_DEVCTRL_REG, 1, + &buf, 1); +} + +/* + * tps65910_voltage_update() - Voltage switching for MPU frequency switching. + * @module: mpu - 0, core - 1 + * @vddx_op_vol_sel: vdd voltage to set + * @return: 0 on success, not 0 on failure + */ +int tps65910_voltage_update(unsigned int module, unsigned char vddx_op_vol_sel) +{ + uchar buf; + unsigned int reg_offset; + int ret; + + if (module == MPU) + reg_offset = TPS65910_VDD1_OP_REG; + else + reg_offset = TPS65910_VDD2_OP_REG; + + /* Select VDDx OP */ + ret = i2c_read(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1); + if (ret) + return ret; + + buf &= ~TPS65910_OP_REG_CMD_MASK; + + ret = i2c_write(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1); + if (ret) + return ret; + + /* Configure VDDx OP Voltage */ + ret = i2c_read(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1); + if (ret) + return ret; + + buf &= ~TPS65910_OP_REG_SEL_MASK; + buf |= vddx_op_vol_sel; + + ret = i2c_write(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1); + if (ret) + return ret; + + ret = i2c_read(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1); + if (ret) + return ret; + + if ((buf & TPS65910_OP_REG_SEL_MASK) != vddx_op_vol_sel) + return 1; + + return 0; +} |