diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/tsec.c | 93 | 
1 files changed, 93 insertions, 0 deletions
| diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 78ffc95c5..160bc0597 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -19,6 +19,7 @@  #include <tsec.h>  #include <fsl_mdio.h>  #include <asm/errno.h> +#include <asm/processor.h>  DECLARE_GLOBAL_DATA_PTR; @@ -43,6 +44,9 @@ static RTXBD rtx __attribute__ ((aligned(8)));  #error "rtx must be 64-bit aligned"  #endif +static int tsec_send(struct eth_device *dev, +	volatile void *packet, int length); +  /* Default initializations for TSEC controllers. */  static struct tsec_info_struct tsec_info[] = { @@ -236,6 +240,87 @@ static void adjust_link(struct tsec_private *priv, struct phy_device *phydev)  			(phydev->port == PORT_FIBRE) ? ", fiber mode" : "");  } +#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129 +/* + * When MACCFG1[Rx_EN] is enabled during system boot as part + * of the eTSEC port initialization sequence, + * the eTSEC Rx logic may not be properly initialized. + */ +void redundant_init(struct eth_device *dev) +{ +	struct tsec_private *priv = dev->priv; +	tsec_t *regs = priv->regs; +	uint t, count = 0; +	int fail = 1; +	static const u8 pkt[] = { +		0x00, 0x1e, 0x4f, 0x12, 0xcb, 0x2c, 0x00, 0x25, +		0x64, 0xbb, 0xd1, 0xab, 0x08, 0x00, 0x45, 0x00, +		0x00, 0x5c, 0xdd, 0x22, 0x00, 0x00, 0x80, 0x01, +		0x1f, 0x71, 0x0a, 0xc1, 0x14, 0x22, 0x0a, 0xc1, +		0x14, 0x6a, 0x08, 0x00, 0xef, 0x7e, 0x02, 0x00, +		0x94, 0x05, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, +		0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, +		0x6f, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, +		0x77, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, +		0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, +		0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, +		0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, +		0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70, +		0x71, 0x72}; + +	/* Enable promiscuous mode */ +	setbits_be32(®s->rctrl, 0x8); +	/* Enable loopback mode */ +	setbits_be32(®s->maccfg1, MACCFG1_LOOPBACK); +	/* Enable transmit and receive */ +	setbits_be32(®s->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN); + +	/* Tell the DMA it is clear to go */ +	setbits_be32(®s->dmactrl, DMACTRL_INIT_SETTINGS); +	out_be32(®s->tstat, TSTAT_CLEAR_THALT); +	out_be32(®s->rstat, RSTAT_CLEAR_RHALT); +	clrbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS); + +	do { +		tsec_send(dev, (void *)pkt, sizeof(pkt)); + +		/* Wait for buffer to be received */ +		for (t = 0; rtx.rxbd[rxIdx].status & RXBD_EMPTY; t++) { +			if (t >= 10 * TOUT_LOOP) { +				printf("%s: tsec: rx error\n", dev->name); +				break; +			} +		} + +		if (!memcmp(pkt, (void *)NetRxPackets[rxIdx], sizeof(pkt))) +			fail = 0; + +		rtx.rxbd[rxIdx].length = 0; +		rtx.rxbd[rxIdx].status = +		    RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0); +		rxIdx = (rxIdx + 1) % PKTBUFSRX; + +		if (in_be32(®s->ievent) & IEVENT_BSY) { +			out_be32(®s->ievent, IEVENT_BSY); +			out_be32(®s->rstat, RSTAT_CLEAR_RHALT); +		} +		if (fail) { +			printf("loopback recv packet error!\n"); +			clrbits_be32(®s->maccfg1, MACCFG1_RX_EN); +			udelay(1000); +			setbits_be32(®s->maccfg1, MACCFG1_RX_EN); +		} +	} while ((count++ < 4) && (fail == 1)); + +	if (fail) +		panic("eTSEC init fail!\n"); +	/* Disable promiscuous mode */ +	clrbits_be32(®s->rctrl, 0x8); +	/* Disable loopback mode */ +	clrbits_be32(®s->maccfg1, MACCFG1_LOOPBACK); +} +#endif +  /* Set up the buffers and their descriptors, and bring up the   * interface   */ @@ -248,6 +333,9 @@ static void startup_tsec(struct eth_device *dev)  	/* reset the indices to zero */  	rxIdx = 0;  	txIdx = 0; +#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129 +	uint svr; +#endif  	/* Point to the buffer descriptors */  	out_be32(®s->tbase, (unsigned int)(&rtx.txbd[txIdx])); @@ -269,6 +357,11 @@ static void startup_tsec(struct eth_device *dev)  	}  	rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP; +#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129 +	svr = get_svr(); +	if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0)) +		redundant_init(dev); +#endif  	/* Enable Transmit and Receive */  	setbits_be32(®s->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN); |