diff options
Diffstat (limited to 'drivers/net/designware.c')
| -rw-r--r-- | drivers/net/designware.c | 54 |
1 files changed, 38 insertions, 16 deletions
diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 987469a2f..e8e669bd9 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -108,16 +108,20 @@ static int mac_reset(struct eth_device *dev) struct eth_mac_regs *mac_p = priv->mac_regs_p; struct eth_dma_regs *dma_p = priv->dma_regs_p; + ulong start; int timeout = CONFIG_MACRESET_TIMEOUT; writel(DMAMAC_SRST, &dma_p->busmode); writel(MII_PORTSELECT, &mac_p->conf); - do { + start = get_timer(0); + while (get_timer(start) < timeout) { if (!(readl(&dma_p->busmode) & DMAMAC_SRST)) return 0; - udelay(1000); - } while (timeout--); + + /* Try again after 10usec */ + udelay(10); + }; return -1; } @@ -273,6 +277,7 @@ static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val) { struct dw_eth_dev *priv = dev->priv; struct eth_mac_regs *mac_p = priv->mac_regs_p; + ulong start; u32 miiaddr; int timeout = CONFIG_MDIO_TIMEOUT; @@ -281,13 +286,16 @@ static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val) writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr); - do { + start = get_timer(0); + while (get_timer(start) < timeout) { if (!(readl(&mac_p->miiaddr) & MII_BUSY)) { *val = readl(&mac_p->miidata); return 0; } - udelay(1000); - } while (timeout--); + + /* Try again after 10usec */ + udelay(10); + }; return -1; } @@ -296,6 +304,7 @@ static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val) { struct dw_eth_dev *priv = dev->priv; struct eth_mac_regs *mac_p = priv->mac_regs_p; + ulong start; u32 miiaddr; int ret = -1, timeout = CONFIG_MDIO_TIMEOUT; u16 value; @@ -306,13 +315,16 @@ static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val) writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr); - do { + start = get_timer(0); + while (get_timer(start) < timeout) { if (!(readl(&mac_p->miiaddr) & MII_BUSY)) { ret = 0; break; } - udelay(1000); - } while (timeout--); + + /* Try again after 10usec */ + udelay(10); + }; /* Needed as a fix for ST-Phy */ eth_mdio_read(dev, addr, reg, &value); @@ -353,18 +365,23 @@ static int dw_reset_phy(struct eth_device *dev) { struct dw_eth_dev *priv = dev->priv; u16 ctrl; + ulong start; int timeout = CONFIG_PHYRESET_TIMEOUT; u32 phy_addr = priv->address; eth_mdio_write(dev, phy_addr, MII_BMCR, BMCR_RESET); - do { + + start = get_timer(0); + while (get_timer(start) < timeout) { eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl); if (!(ctrl & BMCR_RESET)) break; - udelay(1000); - } while (timeout--); - if (timeout < 0) + /* Try again after 10usec */ + udelay(10); + }; + + if (get_timer(start) >= CONFIG_PHYRESET_TIMEOUT) return -1; #ifdef CONFIG_PHY_RESET_DELAY @@ -381,6 +398,7 @@ static int configure_phy(struct eth_device *dev) #if defined(CONFIG_DW_AUTONEG) u16 bmsr; u32 timeout; + ulong start; u16 anlpar, btsr; #else u16 ctrl; @@ -419,12 +437,16 @@ static int configure_phy(struct eth_device *dev) /* Read the phy status register and populate priv structure */ #if defined(CONFIG_DW_AUTONEG) timeout = CONFIG_AUTONEG_TIMEOUT; - do { + start = get_timer(0); + + while (get_timer(start) < timeout) { eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr); if (bmsr & BMSR_ANEGCOMPLETE) break; - udelay(1000); - } while (timeout--); + + /* Try again after 10usec */ + udelay(10); + }; eth_mdio_read(dev, phy_addr, MII_LPA, &anlpar); eth_mdio_read(dev, phy_addr, MII_STAT1000, &btsr); |