1 files changed, 62 insertions, 0 deletions
diff --git a/drivers/mtd/spi/fsl_espi_spl.c b/drivers/mtd/spi/fsl_espi_spl.c
new file mode 100644
index 000000000..6263d8c22
--- /dev/null
+++ b/drivers/mtd/spi/fsl_espi_spl.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <spi_flash.h>
+#include <malloc.h>
+
+#define ESPI_BOOT_IMAGE_SIZE	0x48
+#define ESPI_BOOT_IMAGE_ADDR	0x50
+#define CONFIG_CFG_DATA_SECTOR	0
+
+/*
+ * The main entry for SPI booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from SPI into SDRAM and starts it from there.
+ */
+void spi_boot(void)
+{
+	void (*uboot)(void) __noreturn;
+	u32 offset, code_len;
+	unsigned char *buf = NULL;
+	struct spi_flash *flash;
+
+	flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+			CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+	if (flash == NULL) {
+		puts("\nspi_flash_probe failed");
+		hang();
+	}
+
+	/*
+	* Load U-Boot image from SPI flash into RAM
+	*/
+	buf = malloc(flash->page_size);
+	if (buf == NULL) {
+		puts("\nmalloc failed");
+		hang();
+	}
+	memset(buf, 0, flash->page_size);
+
+	spi_flash_read(flash, CONFIG_CFG_DATA_SECTOR,
+		       flash->page_size, (void *)buf);
+	offset = *(u32 *)(buf + ESPI_BOOT_IMAGE_ADDR);
+	/* Skip spl code */
+	offset += CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
+	/* Get the code size from offset 0x48 */
+	code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE);
+	/* Skip spl code */
+	code_len = code_len - CONFIG_SPL_MAX_SIZE;
+	/* copy code to DDR */
+	spi_flash_read(flash, offset, code_len,
+		       (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_DST);
+	/*
+	* Jump to U-Boot image
+	*/
+	flush_cache(CONFIG_SYS_SPI_FLASH_U_BOOT_DST, code_len);
+	uboot = (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_START;
+	(*uboot)();
+}