diff options
Diffstat (limited to 'drivers/mtd/nand/mxc_nand_spl.c')
| -rw-r--r-- | drivers/mtd/nand/mxc_nand_spl.c | 366 |
1 files changed, 366 insertions, 0 deletions
diff --git a/drivers/mtd/nand/mxc_nand_spl.c b/drivers/mtd/nand/mxc_nand_spl.c new file mode 100644 index 000000000..09f23c30c --- /dev/null +++ b/drivers/mtd/nand/mxc_nand_spl.c @@ -0,0 +1,366 @@ +/* + * (C) Copyright 2009 + * Magnus Lilja <lilja.magnus@gmail.com> + * + * (C) Copyright 2008 + * Maxim Artamonov, <scn1874 at yandex.ru> + * + * (C) Copyright 2006-2008 + * Stefan Roese, DENX Software Engineering, sr at denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <nand.h> +#include <asm/arch/imx-regs.h> +#include <asm/io.h> +#include "mxc_nand.h" + +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) +static struct mxc_nand_regs *const nfc = (void *)NFC_BASE_ADDR; +#elif defined(MXC_NFC_V3_2) +static struct mxc_nand_regs *const nfc = (void *)NFC_BASE_ADDR_AXI; +static struct mxc_nand_ip_regs *const nfc_ip = (void *)NFC_BASE_ADDR; +#endif + +static void nfc_wait_ready(void) +{ + uint32_t tmp; + +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) + while (!(readnfc(&nfc->config2) & NFC_V1_V2_CONFIG2_INT)) + ; + + /* Reset interrupt flag */ + tmp = readnfc(&nfc->config2); + tmp &= ~NFC_V1_V2_CONFIG2_INT; + writenfc(tmp, &nfc->config2); +#elif defined(MXC_NFC_V3_2) + while (!(readnfc(&nfc_ip->ipc) & NFC_V3_IPC_INT)) + ; + + /* Reset interrupt flag */ + tmp = readnfc(&nfc_ip->ipc); + tmp &= ~NFC_V3_IPC_INT; + writenfc(tmp, &nfc_ip->ipc); +#endif +} + +static void nfc_nand_init(void) +{ +#if defined(MXC_NFC_V3_2) + int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512; + int tmp; + + tmp = (readnfc(&nfc_ip->config2) & ~(NFC_V3_CONFIG2_SPAS_MASK | + NFC_V3_CONFIG2_EDC_MASK | NFC_V3_CONFIG2_PS_MASK)) | + NFC_V3_CONFIG2_SPAS(CONFIG_SYS_NAND_OOBSIZE / 2) | + NFC_V3_CONFIG2_INT_MSK | NFC_V3_CONFIG2_ECC_EN | + NFC_V3_CONFIG2_ONE_CYCLE; + if (CONFIG_SYS_NAND_PAGE_SIZE == 4096) + tmp |= NFC_V3_CONFIG2_PS_4096; + else if (CONFIG_SYS_NAND_PAGE_SIZE == 2048) + tmp |= NFC_V3_CONFIG2_PS_2048; + else if (CONFIG_SYS_NAND_PAGE_SIZE == 512) + tmp |= NFC_V3_CONFIG2_PS_512; + /* + * if spare size is larger that 16 bytes per 512 byte hunk + * then use 8 symbol correction instead of 4 + */ + if (CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16) + tmp |= NFC_V3_CONFIG2_ECC_MODE_8; + else + tmp &= ~NFC_V3_CONFIG2_ECC_MODE_8; + writenfc(tmp, &nfc_ip->config2); + + tmp = NFC_V3_CONFIG3_NUM_OF_DEVS(0) | + NFC_V3_CONFIG3_NO_SDMA | + NFC_V3_CONFIG3_RBB_MODE | + NFC_V3_CONFIG3_SBB(6) | /* Reset default */ + NFC_V3_CONFIG3_ADD_OP(0); +#ifndef CONFIG_SYS_NAND_BUSWIDTH_16 + tmp |= NFC_V3_CONFIG3_FW8; +#endif + writenfc(tmp, &nfc_ip->config3); + + writenfc(0, &nfc_ip->delay_line); +#elif defined(MXC_NFC_V2_1) + int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512; + int config1; + + writenfc(CONFIG_SYS_NAND_OOBSIZE / 2, &nfc->spare_area_size); + + /* unlocking RAM Buff */ + writenfc(0x2, &nfc->config); + + /* hardware ECC checking and correct */ + config1 = readnfc(&nfc->config1) | NFC_V1_V2_CONFIG1_ECC_EN | + NFC_V1_V2_CONFIG1_INT_MSK | NFC_V2_CONFIG1_ONE_CYCLE | + NFC_V2_CONFIG1_FP_INT; + /* + * if spare size is larger that 16 bytes per 512 byte hunk + * then use 8 symbol correction instead of 4 + */ + if (CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16) + config1 &= ~NFC_V2_CONFIG1_ECC_MODE_4; + else + config1 |= NFC_V2_CONFIG1_ECC_MODE_4; + writenfc(config1, &nfc->config1); +#elif defined(MXC_NFC_V1) + /* unlocking RAM Buff */ + writenfc(0x2, &nfc->config); + + /* hardware ECC checking and correct */ + writenfc(NFC_V1_V2_CONFIG1_ECC_EN | NFC_V1_V2_CONFIG1_INT_MSK, + &nfc->config1); +#endif +} + +static void nfc_nand_command(unsigned short command) +{ + writenfc(command, &nfc->flash_cmd); + writenfc(NFC_CMD, &nfc->operation); + nfc_wait_ready(); +} + +static void nfc_nand_address(unsigned short address) +{ + writenfc(address, &nfc->flash_addr); + writenfc(NFC_ADDR, &nfc->operation); + nfc_wait_ready(); +} + +static void nfc_nand_page_address(unsigned int page_address) +{ + unsigned int page_count; + + nfc_nand_address(0x00); + + /* code only for large page flash */ + if (CONFIG_SYS_NAND_PAGE_SIZE > 512) + nfc_nand_address(0x00); + + page_count = CONFIG_SYS_NAND_SIZE / CONFIG_SYS_NAND_PAGE_SIZE; + + if (page_address <= page_count) { + page_count--; /* transform 0x01000000 to 0x00ffffff */ + do { + nfc_nand_address(page_address & 0xff); + page_address = page_address >> 8; + page_count = page_count >> 8; + } while (page_count); + } + + nfc_nand_address(0x00); +} + +static void nfc_nand_data_output(void) +{ +#ifdef NAND_MXC_2K_MULTI_CYCLE + int i; +#endif + +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) + writenfc(0, &nfc->buf_addr); +#elif defined(MXC_NFC_V3_2) + int config1 = readnfc(&nfc->config1); + config1 &= ~NFC_V3_CONFIG1_RBA_MASK; + writenfc(config1, &nfc->config1); +#endif + writenfc(NFC_OUTPUT, &nfc->operation); + nfc_wait_ready(); +#ifdef NAND_MXC_2K_MULTI_CYCLE + /* + * This NAND controller requires multiple input commands + * for pages larger than 512 bytes. + */ + for (i = 1; i < CONFIG_SYS_NAND_PAGE_SIZE / 512; i++) { + writenfc(i, &nfc->buf_addr); + writenfc(NFC_OUTPUT, &nfc->operation); + nfc_wait_ready(); + } +#endif +} + +static int nfc_nand_check_ecc(void) +{ +#if defined(MXC_NFC_V1) + u16 ecc_status = readw(&nfc->ecc_status_result); + return (ecc_status & 0x3) == 2 || (ecc_status >> 2) == 2; +#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2) + u32 ecc_status = readl(&nfc->ecc_status_result); + int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512; + int err_limit = CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16 ? 8 : 4; + int subpages = CONFIG_SYS_NAND_PAGE_SIZE / 512; + + do { + if ((ecc_status & 0xf) > err_limit) + return 1; + ecc_status >>= 4; + } while (--subpages); + + return 0; +#endif +} + +static void nfc_nand_read_page(unsigned int page_address) +{ + /* read in first 0 buffer */ +#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) + writenfc(0, &nfc->buf_addr); +#elif defined(MXC_NFC_V3_2) + int config1 = readnfc(&nfc->config1); + config1 &= ~NFC_V3_CONFIG1_RBA_MASK; + writenfc(config1, &nfc->config1); +#endif + nfc_nand_command(NAND_CMD_READ0); + nfc_nand_page_address(page_address); + + if (CONFIG_SYS_NAND_PAGE_SIZE > 512) + nfc_nand_command(NAND_CMD_READSTART); + + nfc_nand_data_output(); /* fill the main buffer 0 */ +} + +static int nfc_read_page(unsigned int page_address, unsigned char *buf) +{ + int i; + u32 *src; + u32 *dst; + + nfc_nand_read_page(page_address); + + if (nfc_nand_check_ecc()) + return -1; + + src = (u32 *)&nfc->main_area[0][0]; + dst = (u32 *)buf; + + /* main copy loop from NAND-buffer to SDRAM memory */ + for (i = 0; i < CONFIG_SYS_NAND_PAGE_SIZE / 4; i++) { + writel(readl(src), dst); + src++; + dst++; + } + + return 0; +} + +static int is_badblock(int pagenumber) +{ + int page = pagenumber; + u32 badblock; + u32 *src; + + /* Check the first two pages for bad block markers */ + for (page = pagenumber; page < pagenumber + 2; page++) { + nfc_nand_read_page(page); + + src = (u32 *)&nfc->spare_area[0][0]; + + /* + * IMPORTANT NOTE: The nand flash controller uses a non- + * standard layout for large page devices. This can + * affect the position of the bad block marker. + */ + /* Get the bad block marker */ + badblock = readl(&src[CONFIG_SYS_NAND_BAD_BLOCK_POS / 4]); + badblock >>= 8 * (CONFIG_SYS_NAND_BAD_BLOCK_POS % 4); + badblock &= 0xff; + + /* bad block marker verify */ + if (badblock != 0xff) + return 1; /* potential bad block */ + } + + return 0; +} + +static int nand_load(unsigned int from, unsigned int size, unsigned char *buf) +{ + int i; + unsigned int page; + unsigned int maxpages = CONFIG_SYS_NAND_SIZE / + CONFIG_SYS_NAND_PAGE_SIZE; + + nfc_nand_init(); + + /* Convert to page number */ + page = from / CONFIG_SYS_NAND_PAGE_SIZE; + i = 0; + + while (i < size / CONFIG_SYS_NAND_PAGE_SIZE) { + if (nfc_read_page(page, buf) < 0) + return -1; + + page++; + i++; + buf = buf + CONFIG_SYS_NAND_PAGE_SIZE; + + /* + * Check if we have crossed a block boundary, and if so + * check for bad block. + */ + if (!(page % CONFIG_SYS_NAND_PAGE_COUNT)) { + /* + * Yes, new block. See if this block is good. If not, + * loop until we find a good block. + */ + while (is_badblock(page)) { + page = page + CONFIG_SYS_NAND_PAGE_COUNT; + /* Check i we've reached the end of flash. */ + if (page >= maxpages) + return -1; + } + } + } + + return 0; +} + +/* + * The main entry for NAND booting. It's necessary that SDRAM is already + * configured and available since this code loads the main U-Boot image + * from NAND into SDRAM and starts it from there. + */ +void nand_boot(void) +{ + __attribute__((noreturn)) void (*uboot)(void); + + /* + * CONFIG_SYS_NAND_U_BOOT_OFFS and CONFIG_SYS_NAND_U_BOOT_SIZE must + * be aligned to full pages + */ + if (!nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, + (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) { + /* Copy from NAND successful, start U-boot */ + uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; + uboot(); + } else { + /* Unrecoverable error when copying from NAND */ + hang(); + } +} + +/* + * Called in case of an exception. + */ +void hang(void) +{ + /* Loop forever */ + while (1) ; +} |