diff options
Diffstat (limited to 'drivers/mmc/omap_hsmmc.c')
| -rw-r--r-- | drivers/mmc/omap_hsmmc.c | 41 |
1 files changed, 38 insertions, 3 deletions
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 975b2c5ba..d3a8b5303 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -288,6 +288,30 @@ static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit) mmc_reg_out(&mmc_base->sysctl, bit, bit); + /* + * CMD(DAT) lines reset procedures are slightly different + * for OMAP3 and OMAP4(AM335x,OMAP5,DRA7xx). + * According to OMAP3 TRM: + * Set SRC(SRD) bit in MMCHS_SYSCTL register to 0x1 and wait until it + * returns to 0x0. + * According to OMAP4(AM335x,OMAP5,DRA7xx) TRMs, CMD(DATA) lines reset + * procedure steps must be as follows: + * 1. Initiate CMD(DAT) line reset by writing 0x1 to SRC(SRD) bit in + * MMCHS_SYSCTL register (SD_SYSCTL for AM335x). + * 2. Poll the SRC(SRD) bit until it is set to 0x1. + * 3. Wait until the SRC (SRD) bit returns to 0x0 + * (reset procedure is completed). + */ +#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \ + defined(CONFIG_AM33XX) + if (!(readl(&mmc_base->sysctl) & bit)) { + start = get_timer(0); + while (!(readl(&mmc_base->sysctl) & bit)) { + if (get_timer(0) - start > MAX_RETRY_MS) + return; + } + } +#endif start = get_timer(0); while ((readl(&mmc_base->sysctl) & bit) != 0) { if (get_timer(0) - start > MAX_RETRY_MS) { @@ -376,6 +400,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, } writel(cmd->cmdarg, &mmc_base->arg); + udelay(20); /* To fix "No status update" error on eMMC */ writel((cmd->cmdidx << 24) | flags, &mmc_base->cmd); start = get_timer(0); @@ -480,7 +505,7 @@ static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, unsigned int count; /* - * Start Polled Read + * Start Polled Write */ count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size; count /= 4; @@ -586,6 +611,8 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, { struct mmc *mmc = &hsmmc_dev[dev_index]; struct omap_hsmmc_data *priv_data = &hsmmc_dev_data[dev_index]; + uint host_caps_val = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS | + MMC_MODE_HC; sprintf(mmc->name, "OMAP SD/MMC"); mmc->send_cmd = mmc_send_cmd; @@ -600,11 +627,20 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, #ifdef OMAP_HSMMC2_BASE case 1: priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE; +#if (defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \ + defined(CONFIG_DRA7XX)) && defined(CONFIG_HSMMC2_8BIT) + /* Enable 8-bit interface for eMMC on OMAP4/5 or DRA7XX */ + host_caps_val |= MMC_MODE_8BIT; +#endif break; #endif #ifdef OMAP_HSMMC3_BASE case 2: priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE; +#if defined(CONFIG_DRA7XX) && defined(CONFIG_HSMMC3_8BIT) + /* Enable 8-bit interface for eMMC on DRA7XX */ + host_caps_val |= MMC_MODE_8BIT; +#endif break; #endif default: @@ -620,8 +656,7 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, mmc->getwp = omap_mmc_getwp; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; - mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS | - MMC_MODE_HC) & ~host_caps_mask; + mmc->host_caps = host_caps_val & ~host_caps_mask; mmc->f_min = 400000; |