diff options
Diffstat (limited to 'drivers/i2c')
| -rw-r--r-- | drivers/i2c/Makefile | 1 | ||||
| -rw-r--r-- | drivers/i2c/s3c44b0_i2c.c | 299 |
2 files changed, 0 insertions, 300 deletions
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 37ccbd142..df3092eaf 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -21,7 +21,6 @@ COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o COBJS-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o -COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o COBJS-$(CONFIG_U8500_I2C) += u8500_i2c.o COBJS-$(CONFIG_SH_I2C) += sh_i2c.o diff --git a/drivers/i2c/s3c44b0_i2c.c b/drivers/i2c/s3c44b0_i2c.c deleted file mode 100644 index 8445e01ca..000000000 --- a/drivers/i2c/s3c44b0_i2c.c +++ /dev/null @@ -1,299 +0,0 @@ -/* - * (C) Copyright 2004 - * DAVE Srl - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <asm/hardware.h> - -/* - * Initialization, must be called once on start up, may be called - * repeatedly to change the speed and slave addresses. - */ -void i2c_init(int speed, int slaveaddr) -{ - /* - setting up I2C support - */ - unsigned int save_F,save_PF,rIICCON,rPCONA,rPDATA,rPCONF,rPUPF; - - save_F = PCONF; - save_PF = PUPF; - - rPCONF = ((save_F & ~(0xF))| 0xa); - rPUPF = (save_PF | 0x3); - PCONF = rPCONF; /*PF0:IICSCL, PF1:IICSDA*/ - PUPF = rPUPF; /* Disable pull-up */ - - /* Configuring pin for WC pin of EEprom */ - rPCONA = PCONA; - rPCONA &= ~(1<<9); - PCONA = rPCONA; - - rPDATA = PDATA; - rPDATA &= ~(1<<9); - PDATA = rPDATA; - - /* - Enable ACK, IICCLK=MCLK/16, enable interrupt - 75MHz/16/(12+1) = 390625 Hz - */ - rIICCON=(1<<7)|(0<<6)|(1<<5)|(0xC); - IICCON = rIICCON; - - IICADD = slaveaddr; -} - -/* - * Probe the given I2C chip address. Returns 0 if a chip responded, - * not 0 on failure. - */ -int i2c_probe(uchar chip) -{ - /* - not implemented - */ - - printf("i2c_probe chip %d\n", (int) chip); - return -1; -} - -/* - * Read/Write interface: - * chip: I2C chip address, range 0..127 - * addr: Memory (register) address within the chip - * alen: Number of bytes to use for addr (typically 1, 2 for larger - * memories, 0 for register type devices with only one - * register) - * buffer: Where to read/write the data - * len: How many bytes to read/write - * - * Returns: 0 on success, not 0 on failure - */ - -#define S3C44B0X_rIIC_INTPEND (1<<4) -#define S3C44B0X_rIIC_LAST_RECEIV_BIT (1<<0) -#define S3C44B0X_rIIC_INTERRUPT_ENABLE (1<<5) -#define S3C44B0_IIC_TIMEOUT 100 - -int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) -{ - - int k, j, temp; - u32 rIICSTAT; - - /* - send the device offset - */ - - rIICSTAT = 0xD0; - IICSTAT = rIICSTAT; - - IICDS = chip; /* this is a write operation... */ - - rIICSTAT |= (1<<5); - IICSTAT = rIICSTAT; - - for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) { - temp = IICCON; - if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND) - break; - udelay(2000); - } - if (k==S3C44B0_IIC_TIMEOUT) - return -1; - - /* wait and check ACK */ - temp = IICSTAT; - if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT ) - return -1; - - IICDS = addr; - IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND); - - /* wait and check ACK */ - for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) { - temp = IICCON; - if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND) - break; - udelay(2000); - } - if (k==S3C44B0_IIC_TIMEOUT) - return -1; - - temp = IICSTAT; - if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT ) - return -1; - - /* - now we can start with the read operation... - */ - - IICDS = chip | 0x01; /* this is a read operation... */ - - rIICSTAT = 0x90; /*master recv*/ - rIICSTAT |= (1<<5); - IICSTAT = rIICSTAT; - - IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND); - - /* wait and check ACK */ - for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) { - temp = IICCON; - if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND) - break; - udelay(2000); - } - if (k==S3C44B0_IIC_TIMEOUT) - return -1; - - temp = IICSTAT; - if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT ) - return -1; - - for (j=0; j<len-1; j++) { - - /*clear pending bit to resume */ - - temp = IICCON & ~(S3C44B0X_rIIC_INTPEND); - IICCON = temp; - - /* wait and check ACK */ - for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) { - temp = IICCON; - if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND) - break; - udelay(2000); - } - if (k==S3C44B0_IIC_TIMEOUT) - return -1; - - - buffer[j] = IICDS; /*save readed data*/ - - } /*end for(j)*/ - - /* - reading the last data - unset ACK generation - */ - temp = IICCON & ~(S3C44B0X_rIIC_INTPEND | (1<<7)); - IICCON = temp; - - /* wait but NOT check ACK */ - for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) { - temp = IICCON; - if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND) - break; - udelay(2000); - } - if (k==S3C44B0_IIC_TIMEOUT) - return -1; - - buffer[j] = IICDS; /*save readed data*/ - - rIICSTAT = 0x90; /*master recv*/ - - /* Write operation Terminate sending STOP */ - IICSTAT = rIICSTAT; - /*Clear Int Pending Bit to RESUME*/ - temp = IICCON; - IICCON = temp & (~S3C44B0X_rIIC_INTPEND); - - IICCON = IICCON | (1<<7); /*restore ACK generation*/ - - return 0; -} - -int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) -{ - int j, k; - u32 rIICSTAT, temp; - - - /* - send the device offset - */ - - rIICSTAT = 0xD0; - IICSTAT = rIICSTAT; - - IICDS = chip; /* this is a write operation... */ - - rIICSTAT |= (1<<5); - IICSTAT = rIICSTAT; - - IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND); - - /* wait and check ACK */ - for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) { - temp = IICCON; - if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND) - break; - udelay(2000); - } - if (k==S3C44B0_IIC_TIMEOUT) - return -1; - - temp = IICSTAT; - if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT ) - return -1; - - IICDS = addr; - IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND); - - /* wait and check ACK */ - for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) { - temp = IICCON; - if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND) - break; - udelay(2000); - } - if (k==S3C44B0_IIC_TIMEOUT) - return -1; - - temp = IICSTAT; - if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT ) - return -1; - - /* - now we can start with the read write operation - */ - for (j=0; j<len; j++) { - - IICDS = buffer[j]; /*prerare data to write*/ - - /*clear pending bit to resume*/ - - temp = IICCON & ~(S3C44B0X_rIIC_INTPEND); - IICCON = temp; - - /* wait but NOT check ACK */ - for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) { - temp = IICCON; - if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND) - break; - - udelay(2000); - } - - if (k==S3C44B0_IIC_TIMEOUT) - return -1; - - } /* end for(j) */ - - /* sending stop to terminate */ - rIICSTAT = 0xD0; /*master send*/ - IICSTAT = rIICSTAT; - /*Clear Int Pending Bit to RESUME*/ - temp = IICCON; - IICCON = temp & (~S3C44B0X_rIIC_INTPEND); - - return 0; -} |