diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.mx31 | 2 | ||||
| -rw-r--r-- | doc/README.qemu_mips | 8 | ||||
| -rw-r--r-- | doc/README.sh7785lcr | 1 |
3 files changed, 4 insertions, 7 deletions
diff --git a/doc/README.mx31 b/doc/README.mx31 index f912b66fe..291c2f31b 100644 --- a/doc/README.mx31 +++ b/doc/README.mx31 @@ -1,4 +1,3 @@ - U-Boot for Freescale i.MX31 This file contains information for the port of U-Boot to the Freescale @@ -16,4 +15,3 @@ to setup the bus and chip select used for a particular board. CONFIG_MC13783_SPI_BUS -- defines the SPI bus the MC13783 is connected to. Note that 0 is CSPI1, 1 is CSPI2 and 2 is CSPI3. CONFIG_MC13783_SPI_CS -- define the chip select the MC13783 s connected to. - diff --git a/doc/README.qemu_mips b/doc/README.qemu_mips index 472469f98..2fdd2b03a 100644 --- a/doc/README.qemu_mips +++ b/doc/README.qemu_mips @@ -42,7 +42,7 @@ This GDB was configured as "--host=i486-linux-gnu --target=mipsel-unknown-linux- (gdb) target remote localhost:1234 Remote debugging using localhost:1234 _start () at start.S:64 -64 RVECENT(reset,0) /* U-boot entry point */ +64 RVECENT(reset,0) /* U-boot entry point */ Current language: auto; currently asm (gdb) b board.c:289 Breakpoint 1 at 0xbfc00cc8: file board.c, line 289. @@ -50,7 +50,7 @@ Breakpoint 1 at 0xbfc00cc8: file board.c, line 289. Continuing. Breakpoint 1, board_init_f (bootflag=<value optimized out>) at board.c:290 -290 relocate_code (addr_sp, id, addr); +290 relocate_code (addr_sp, id, addr); Current language: auto; currently c (gdb) p/x addr $1 = 0x87fa0000 @@ -68,7 +68,7 @@ No symbol table is loaded. Use the "file" command. No symbol file now. (gdb) add-symbol-file u-boot 0x87fa0000 add symbol table from file "u-boot" at - .text_addr = 0x87fa0000 + .text_addr = 0x87fa0000 (y or n) y Reading symbols from /private/u-boot-arm/u-boot...done. Breakpoint 1 at 0x87fa0cc8: file board.c, line 289. @@ -77,4 +77,4 @@ Continuing. Program received signal SIGINT, Interrupt. 0xffffffff87fa0de4 in udelay (usec=<value optimized out>) at time.c:78 -78 while ((tmo - read_c0_count()) < 0x7fffffff) +78 while ((tmo - read_c0_count()) < 0x7fffffff) diff --git a/doc/README.sh7785lcr b/doc/README.sh7785lcr index 077027695..c8d8ccdd2 100644 --- a/doc/README.sh7785lcr +++ b/doc/README.sh7785lcr @@ -80,4 +80,3 @@ This command writes MAC address of this board. i.e) => setmac 00:00:87:**:**:** - |