diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.srio-pcie-boot-corenet | 34 | ||||
| -rw-r--r-- | doc/device-tree-bindings/video/simple-framebuffer.txt | 25 |
2 files changed, 45 insertions, 14 deletions
diff --git a/doc/README.srio-pcie-boot-corenet b/doc/README.srio-pcie-boot-corenet index cd7e7ee9b..2b1f76b8d 100644 --- a/doc/README.srio-pcie-boot-corenet +++ b/doc/README.srio-pcie-boot-corenet @@ -21,13 +21,13 @@ Environment of the SRIO or PCIE boot: e) Slave's RCW should configure the SerDes for SRIO or PCIE boot port, set the boot location to SRIO or PCIE, and holdoff all the cores. - ---------- ----------- ----------- - | | | | | | - | | | | | | + ----------- ----------- ----------- + | | | | | | + | | | | | | | NorFlash|<----->| Master |SRIO or PCIE | Slave |<---->[EEPROM] - | | | |<===========>| | - | | | | | | - ---------- ----------- ----------- + | | | |<===========>| | + | | | | | | + ----------- ----------- ----------- The example based on P4080DS platform: Two P4080DS platforms can be used to implement the boot from SRIO or PCIE. @@ -87,26 +87,32 @@ How to use this feature: Please refer to the examples given above. 2. U-Boot image's compilation. - For master, U-Boot image should be generated normally. + For master, U-Boot image should be generated normally. - For example, master U-Boot image used on P4080DS should be compiled with + For example, master U-Boot image used on P4080DS should be compiled with make P4080DS_config. - For slave, U-Boot image should be generated specifically by + For slave, U-Boot image should be generated specifically by make xxxx_SRIO_PCIE_BOOT_config. - For example, slave U-Boot image used on P4080DS should be compiled with + For example, slave U-Boot image used on P4080DS should be compiled with make P4080DS_SRIO_PCIE_BOOT_config. 3. Necessary modifications based on a specific environment. - For a specific environment, the addresses of the slave's U-Boot image, - UCode, ENV stored in master's NorFlash, and any other configurations - can be modified in the file: - include/configs/corenet_ds.h. + For a specific environment, the addresses of the slave's U-Boot image, + UCode, ENV stored in master's NorFlash, and any other configurations + can be modified in the file: + include/configs/corenet_ds.h. 4. Set and save the environment variable "bootmaster" with "SRIO1", "SRIO2" or "PCIE1", "PCIE2", "PCIE3" for master, and then restart it in order to perform the role as a master for boot from SRIO or PCIE. + +NOTE: When the Slave's ENV parameters are stored in Master's NorFlash, + it can fetch them through PCIE or SRIO interface. But the ENV + parameters can not be modified by "saveenv" or other commands under + the Slave's u-boot environment, because the Slave can not erase, + write Master's NorFlash by PCIE or SRIO link. diff --git a/doc/device-tree-bindings/video/simple-framebuffer.txt b/doc/device-tree-bindings/video/simple-framebuffer.txt new file mode 100644 index 000000000..3ea460583 --- /dev/null +++ b/doc/device-tree-bindings/video/simple-framebuffer.txt @@ -0,0 +1,25 @@ +Simple Framebuffer + +A simple frame-buffer describes a raw memory region that may be rendered to, +with the assumption that the display hardware has already been set up to scan +out from that buffer. + +Required properties: +- compatible: "simple-framebuffer" +- reg: Should contain the location and size of the framebuffer memory. +- width: The width of the framebuffer in pixels. +- height: The height of the framebuffer in pixels. +- stride: The number of bytes in each line of the framebuffer. +- format: The format of the framebuffer surface. Valid values are: + - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b). + +Example: + + framebuffer { + compatible = "simple-framebuffer"; + reg = <0x1d385000 (1600 * 1200 * 2)>; + width = <1600>; + height = <1200>; + stride = <(1600 * 2)>; + format = "r5g6b5"; + }; |