diff options
Diffstat (limited to 'cpu')
| -rw-r--r-- | cpu/ppc4xx/44x_spd_ddr2.c | 158 | ||||
| -rw-r--r-- | cpu/ppc4xx/4xx_enet.c | 168 | ||||
| -rw-r--r-- | cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c | 1212 | ||||
| -rw-r--r-- | cpu/ppc4xx/Makefile | 3 | ||||
| -rw-r--r-- | cpu/ppc4xx/miiphy.c | 37 |
5 files changed, 1504 insertions, 74 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 15250d470..f1d76840f 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -60,8 +60,6 @@ "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \ } while (0) -static inline void ppc4xx_ibm_ddr2_register_dump(void); - #if defined(CONFIG_SPD_EEPROM) /*-----------------------------------------------------------------------------+ @@ -260,62 +258,19 @@ static void program_ecc_addr(unsigned long start_address, unsigned long num_bytes, unsigned long tlb_word2_i_value); #endif +#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) static void program_DQS_calibration(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks); + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); #ifdef HARD_CODED_DQS /* calibration test with hardvalues */ static void test(void); #else static void DQS_calibration_process(void); #endif +#endif int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); void dcbz_area(u32 start_address, u32 num_bytes); -static u32 mfdcr_any(u32 dcr) -{ - u32 val; - - switch (dcr) { - case SDRAM_R0BAS + 0: - val = mfdcr(SDRAM_R0BAS + 0); - break; - case SDRAM_R0BAS + 1: - val = mfdcr(SDRAM_R0BAS + 1); - break; - case SDRAM_R0BAS + 2: - val = mfdcr(SDRAM_R0BAS + 2); - break; - case SDRAM_R0BAS + 3: - val = mfdcr(SDRAM_R0BAS + 3); - break; - default: - printf("DCR %d not defined in case statement!!!\n", dcr); - val = 0; /* just to satisfy the compiler */ - } - - return val; -} - -static void mtdcr_any(u32 dcr, u32 val) -{ - switch (dcr) { - case SDRAM_R0BAS + 0: - mtdcr(SDRAM_R0BAS + 0, val); - break; - case SDRAM_R0BAS + 1: - mtdcr(SDRAM_R0BAS + 1, val); - break; - case SDRAM_R0BAS + 2: - mtdcr(SDRAM_R0BAS + 2, val); - break; - case SDRAM_R0BAS + 3: - mtdcr(SDRAM_R0BAS + 3, val); - break; - default: - printf("DCR %d not defined in case statement!!!\n", dcr); - } -} - static unsigned char spd_read(uchar chip, uint addr) { unsigned char data[2]; @@ -609,7 +564,11 @@ phys_size_t initdram(int board_type) /*------------------------------------------------------------------ * DQS calibration. *-----------------------------------------------------------------*/ +#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) + DQS_autocalibration(); +#else program_DQS_calibration(dimm_populated, iic0_dimm_addr, num_dimm_banks); +#endif #ifdef CONFIG_DDR_ECC /*------------------------------------------------------------------ @@ -2329,18 +2288,6 @@ static unsigned long is_ecc_enabled(void) return ecc; } -static void blank_string(int size) -{ - int i; - - for (i=0; i<size; i++) - putc('\b'); - for (i=0; i<size; i++) - putc(' '); - for (i=0; i<size; i++) - putc('\b'); -} - #ifdef CONFIG_DDR_ECC /*-----------------------------------------------------------------------------+ * program_ecc. @@ -2468,6 +2415,7 @@ static void program_ecc_addr(unsigned long start_address, } #endif +#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) /*-----------------------------------------------------------------------------+ * program_DQS_calibration. *-----------------------------------------------------------------------------*/ @@ -3001,7 +2949,8 @@ static void test(void) (ppcMfdcr_sdram(SDRAM_MCOPT1) & ~SDRAM_MCOPT1_MCHK_MASK) | ecc_temp); } -#endif +#endif /* !HARD_CODED_DQS */ +#endif /* !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */ #else /* CONFIG_SPD_EEPROM */ @@ -3104,9 +3053,12 @@ phys_size_t initdram(int board_type) /* Set Delay Control Registers */ mtsdram(SDRAM_DLCR, CFG_SDRAM0_DLCR); + +#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) mtsdram(SDRAM_RDCC, CFG_SDRAM0_RDCC); mtsdram(SDRAM_RQDC, CFG_SDRAM0_RQDC); mtsdram(SDRAM_RFDC, CFG_SDRAM0_RFDC); +#endif /* !CONFIG_PPC4xx_DDR_AUTOCALIBRATION */ /* * Enable Controller by SDRAM0_MCOPT2[DCEN] = 1: @@ -3115,18 +3067,98 @@ phys_size_t initdram(int board_type) mfsdram(SDRAM_MCOPT2, val); mtsdram(SDRAM_MCOPT2, val | SDRAM_MCOPT2_DCEN_ENABLE); +#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) + /*------------------------------------------------------------------ + | DQS calibration. + +-----------------------------------------------------------------*/ + DQS_autocalibration(); +#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */ +#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */ + #if defined(CONFIG_DDR_ECC) ecc_init(CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20); #endif /* defined(CONFIG_DDR_ECC) */ ppc4xx_ibm_ddr2_register_dump(); + +#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) + /* + * Clear potential errors resulting from auto-calibration. + * If not done, then we could get an interrupt later on when + * exceptions are enabled. + */ + set_mcsr(get_mcsr()); +#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */ + #endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */ return (CFG_MBYTES_SDRAM << 20); } #endif /* CONFIG_SPD_EEPROM */ -static inline void ppc4xx_ibm_ddr2_register_dump(void) +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#if defined(CONFIG_440) +u32 mfdcr_any(u32 dcr) +{ + u32 val; + + switch (dcr) { + case SDRAM_R0BAS + 0: + val = mfdcr(SDRAM_R0BAS + 0); + break; + case SDRAM_R0BAS + 1: + val = mfdcr(SDRAM_R0BAS + 1); + break; + case SDRAM_R0BAS + 2: + val = mfdcr(SDRAM_R0BAS + 2); + break; + case SDRAM_R0BAS + 3: + val = mfdcr(SDRAM_R0BAS + 3); + break; + default: + printf("DCR %d not defined in case statement!!!\n", dcr); + val = 0; /* just to satisfy the compiler */ + } + + return val; +} + +void mtdcr_any(u32 dcr, u32 val) +{ + switch (dcr) { + case SDRAM_R0BAS + 0: + mtdcr(SDRAM_R0BAS + 0, val); + break; + case SDRAM_R0BAS + 1: + mtdcr(SDRAM_R0BAS + 1, val); + break; + case SDRAM_R0BAS + 2: + mtdcr(SDRAM_R0BAS + 2, val); + break; + case SDRAM_R0BAS + 3: + mtdcr(SDRAM_R0BAS + 3, val); + break; + default: + printf("DCR %d not defined in case statement!!!\n", dcr); + } +} +#endif /* defined(CONFIG_440) */ + +void blank_string(int size) +{ + int i; + + for (i = 0; i < size; i++) + putc('\b'); + for (i = 0; i < size; i++) + putc(' '); + for (i = 0; i < size; i++) + putc('\b'); +} +#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */ + +inline void ppc4xx_ibm_ddr2_register_dump(void) { #if defined(DEBUG) printf("\nPPC4xx IBM DDR2 Register Dump:\n"); diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index 8a3833513..6d4d043e0 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -198,6 +198,7 @@ #define BI_PHYMODE_RMII 8 #endif #endif +#define BI_PHYMODE_SGMII 9 #if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ @@ -216,6 +217,52 @@ #define MAL_RX_CHAN_MUL 1 #endif +/*--------------------------------------------------------------------+ + * Fixed PHY (PHY-less) support for Ethernet Ports. + *--------------------------------------------------------------------*/ + +/* + * Some boards do not have a PHY for each ethernet port. These ports + * are known as Fixed PHY (or PHY-less) ports. For such ports, set + * the appropriate CONFIG_PHY_ADDR equal to CONFIG_FIXED_PHY and + * then define CFG_FIXED_PHY_PORTS to define what the speed and + * duplex should be for these ports in the board configuration + * file. + * + * For Example: + * #define CONFIG_FIXED_PHY 0xFFFFFFFF + * + * #define CONFIG_PHY_ADDR CONFIG_FIXED_PHY + * #define CONFIG_PHY1_ADDR 1 + * #define CONFIG_PHY2_ADDR CONFIG_FIXED_PHY + * #define CONFIG_PHY3_ADDR 3 + * + * #define CFG_FIXED_PHY_PORT(devnum,speed,duplex) \ + * {devnum, speed, duplex}, + * + * #define CFG_FIXED_PHY_PORTS \ + * CFG_FIXED_PHY_PORT(0,1000,FULL) \ + * CFG_FIXED_PHY_PORT(2,100,HALF) + */ + +#ifndef CONFIG_FIXED_PHY +#define CONFIG_FIXED_PHY 0xFFFFFFFF /* Fixed PHY (PHY-less) */ +#endif + +#ifndef CFG_FIXED_PHY_PORTS +#define CFG_FIXED_PHY_PORTS /* default is an empty array */ +#endif + +struct fixed_phy_port { + unsigned int devnum; /* ethernet port */ + unsigned int speed; /* specified speed 10,100 or 1000 */ + unsigned int duplex; /* specified duplex FULL or HALF */ +}; + +static const struct fixed_phy_port fixed_phy_port[] = { + CFG_FIXED_PHY_PORTS /* defined in board configuration file */ +}; + /*-----------------------------------------------------------------------------+ * Global variables. TX and RX descriptors and buffers. *-----------------------------------------------------------------------------*/ @@ -611,8 +658,17 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) #if defined(CONFIG_460EX) mode = 9; + mfsdr(SDR0_ETH_CFG, eth_cfg); + if (((eth_cfg & SDR0_ETH_CFG_SGMII0_ENABLE) > 0) && + ((eth_cfg & SDR0_ETH_CFG_SGMII1_ENABLE) > 0)) + mode = 11; /* config SGMII */ #else mode = 10; + mfsdr(SDR0_ETH_CFG, eth_cfg); + if (((eth_cfg & SDR0_ETH_CFG_SGMII0_ENABLE) > 0) && + ((eth_cfg & SDR0_ETH_CFG_SGMII1_ENABLE) > 0) && + ((eth_cfg & SDR0_ETH_CFG_SGMII2_ENABLE) > 0)) + mode = 12; /* config SGMII */ #endif /* TODO: @@ -635,6 +691,8 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) /* * Right now only 2*RGMII is supported. Please extend when needed. * sr - 2008-02-19 + * Add SGMII support. + * vg - 2008-07-28 */ switch (mode) { case 1: @@ -761,6 +819,20 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) bis->bi_phymode[2] = BI_PHYMODE_RGMII; bis->bi_phymode[3] = BI_PHYMODE_RGMII; break; + case 11: + /* 2 SGMII - 460EX */ + bis->bi_phymode[0] = BI_PHYMODE_SGMII; + bis->bi_phymode[1] = BI_PHYMODE_SGMII; + bis->bi_phymode[2] = BI_PHYMODE_NONE; + bis->bi_phymode[3] = BI_PHYMODE_NONE; + break; + case 12: + /* 3 SGMII - 460GT */ + bis->bi_phymode[0] = BI_PHYMODE_SGMII; + bis->bi_phymode[1] = BI_PHYMODE_SGMII; + bis->bi_phymode[2] = BI_PHYMODE_SGMII; + bis->bi_phymode[3] = BI_PHYMODE_NONE; + break; default: break; } @@ -945,9 +1017,50 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg); #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ +#if defined(CONFIG_GPCS_PHY_ADDR) || defined(CONFIG_GPCS_PHY1_ADDR) || \ + defined(CONFIG_GPCS_PHY2_ADDR) || defined(CONFIG_GPCS_PHY3_ADDR) + if (bis->bi_phymode[devnum] == BI_PHYMODE_SGMII) { + /* + * In SGMII mode, GPCS access is needed for + * communication with the internal SGMII SerDes. + */ + switch (devnum) { +#if defined(CONFIG_GPCS_PHY_ADDR) + case 0: + reg = CONFIG_GPCS_PHY_ADDR; + break; +#endif +#if defined(CONFIG_GPCS_PHY1_ADDR) + case 1: + reg = CONFIG_GPCS_PHY1_ADDR; + break; +#endif +#if defined(CONFIG_GPCS_PHY2_ADDR) + case 2: + reg = CONFIG_GPCS_PHY2_ADDR; + break; +#endif +#if defined(CONFIG_GPCS_PHY3_ADDR) + case 3: + reg = CONFIG_GPCS_PHY3_ADDR; + break; +#endif + } + + mode_reg = in_be32((void *)EMAC_M1 + hw_p->hw_addr); + mode_reg |= EMAC_M1_MF_1000GPCS | EMAC_M1_IPPA_SET(reg); + out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg); + + /* Configure GPCS interface to recommended setting for SGMII */ + miiphy_reset(dev->name, reg); + miiphy_write(dev->name, reg, 0x04, 0x8120); /* AsymPause, FDX */ + miiphy_write(dev->name, reg, 0x07, 0x2801); /* msg_pg, toggle */ + miiphy_write(dev->name, reg, 0x00, 0x0140); /* 1Gbps, FDX */ + } +#endif /* defined(CONFIG_GPCS_PHY_ADDR) */ + /* wait for PHY to complete auto negotiation */ reg_short = 0; -#ifndef CONFIG_CS8952_PHY switch (devnum) { case 0: reg = CONFIG_PHY_ADDR; @@ -974,6 +1087,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) bis->bi_phynum[devnum] = reg; + if (reg == CONFIG_FIXED_PHY) + goto get_speed; + #if defined(CONFIG_PHY_RESET) /* * Reset the phy, only if its the first time through @@ -986,6 +1102,27 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) miiphy_write (dev->name, reg, 0x09, 0x0e00); miiphy_write (dev->name, reg, 0x04, 0x01e1); #endif +#if defined(CONFIG_M88E1112_PHY) + if (bis->bi_phymode[devnum] == BI_PHYMODE_SGMII) { + /* + * Marvell 88E1112 PHY needs to have the SGMII MAC + * interace (page 2) properly configured to + * communicate with the 460EX/GT GPCS interface. + */ + + /* Set access to Page 2 */ + miiphy_write(dev->name, reg, 0x16, 0x0002); + + miiphy_write(dev->name, reg, 0x00, 0x0040); /* 1Gbps */ + miiphy_read(dev->name, reg, 0x1a, ®_short); + reg_short |= 0x8000; /* bypass Auto-Negotiation */ + miiphy_write(dev->name, reg, 0x1a, reg_short); + miiphy_reset(dev->name, reg); /* reset MAC interface */ + + /* Reset access to Page 0 */ + miiphy_write(dev->name, reg, 0x16, 0x0000); + } +#endif /* defined(CONFIG_M88E1112_PHY) */ miiphy_reset (dev->name, reg); #if defined(CONFIG_440GX) || \ @@ -1022,7 +1159,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) miiphy_write (dev->name, reg, 0x1f, 0x0000); /* end Vitesse/Cicada errata */ } -#endif +#endif /* defined(CONFIG_CIS8201_PHY) */ #if defined(CONFIG_ET1011C_PHY) /* @@ -1041,9 +1178,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) miiphy_write(dev->name, reg, 0x1c, 0x74f0); } -#endif +#endif /* defined(CONFIG_ET1011C_PHY) */ -#endif +#endif /* defined(CONFIG_440GX) ... */ /* Start/Restart autonegotiation */ phy_setup_aneg (dev->name, reg); udelay (1000); @@ -1073,15 +1210,30 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) } udelay (1000); /* 1 ms */ miiphy_read (dev->name, reg, PHY_BMSR, ®_short); - } puts (" done\n"); udelay (500000); /* another 500 ms (results in faster booting) */ } -#endif /* #ifndef CONFIG_CS8952_PHY */ - speed = miiphy_speed (dev->name, reg); - duplex = miiphy_duplex (dev->name, reg); +get_speed: + if (reg == CONFIG_FIXED_PHY) { + for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) { + if (devnum == fixed_phy_port[i].devnum) { + speed = fixed_phy_port[i].speed; + duplex = fixed_phy_port[i].duplex; + break; + } + } + + if (i == ARRAY_SIZE(fixed_phy_port)) { + printf("ERROR: PHY (%s) not configured correctly!\n", + dev->name); + return -1; + } + } else { + speed = miiphy_speed(dev->name, reg); + duplex = miiphy_duplex(dev->name, reg); + } if (hw_p->print_speed) { hw_p->print_speed = 0; diff --git a/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c new file mode 100644 index 000000000..83b9883a7 --- /dev/null +++ b/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c @@ -0,0 +1,1212 @@ +/* + * cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c + * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a + * DDR2 controller (non Denali Core). Those currently are: + * + * 405: 405EX + * 440/460: 440SP/440SPe/460EX/460GT/460SX + * + * (C) Copyright 2008 Applied Micro Circuits Corporation + * Adam Graham <agraham@amcc.com> + * + * (C) Copyright 2007-2008 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * COPYRIGHT AMCC CORPORATION 2004 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* define DEBUG for debugging output (obviously ;-)) */ +#undef DEBUG + +#include <common.h> +#include <ppc4xx.h> +#include <asm/io.h> +#include <asm/processor.h> + +#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) + +/* + * Only compile the DDR auto-calibration code for NOR boot and + * not for NAND boot (NAND SPL and NAND U-Boot - NUB) + */ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) + +#define MAXBXCF 4 +#define SDRAM_RXBAS_SHIFT_1M 20 + +#if defined(CFG_DECREMENT_PATTERNS) +#define NUMMEMTESTS 24 +#else +#define NUMMEMTESTS 8 +#endif /* CFG_DECREMENT_PATTERNS */ +#define NUMLOOPS 1 /* configure as you deem approporiate */ +#define NUMMEMWORDS 16 + +/* Private Structure Definitions */ + +struct autocal_regs { + u32 rffd; + u32 rqfd; +}; + +struct ddrautocal { + u32 rffd; + u32 rffd_min; + u32 rffd_max; + u32 rffd_size; + u32 rqfd; + u32 rqfd_size; + u32 rdcc; + u32 flags; +}; + +struct sdram_timing { + u32 wrdtr; + u32 clktr; +}; + +struct sdram_timing_clks { + u32 wrdtr; + u32 clktr; + u32 rdcc; + u32 flags; +}; + +struct autocal_clks { + struct sdram_timing_clks clocks; + struct ddrautocal autocal; +}; + +/*--------------------------------------------------------------------------+ + * Prototypes + *--------------------------------------------------------------------------*/ +#if defined(CONFIG_PPC4xx_DDR_METHOD_A) +static u32 DQS_calibration_methodA(struct ddrautocal *); +static u32 program_DQS_calibration_methodA(struct ddrautocal *); +#else +static u32 DQS_calibration_methodB(struct ddrautocal *); +static u32 program_DQS_calibration_methodB(struct ddrautocal *); +#endif +static int short_mem_test(u32 *); + +/* + * To provide an interface for board specific config values in this common + * DDR setup code, we implement he "weak" default functions here. They return + * the default value back to the caller. + * + * Please see include/configs/yucca.h for an example fora board specific + * implementation. + */ + +#if !defined(CONFIG_SPD_EEPROM) +u32 __ddr_wrdtr(u32 default_val) +{ + return default_val; +} +u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr"))); + +u32 __ddr_clktr(u32 default_val) +{ + return default_val; +} +u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr"))); + +/* + * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed + */ +void __spd_ddr_init_hang(void) +{ + hang(); +} +void +spd_ddr_init_hang(void) __attribute__((weak, alias("__spd_ddr_init_hang"))); +#endif /* defined(CONFIG_SPD_EEPROM) */ + +ulong __ddr_scan_option(ulong default_val) +{ + return default_val; +} +ulong ddr_scan_option(ulong) __attribute__((weak, alias("__ddr_scan_option"))); + +static u32 *get_membase(int bxcr_num) +{ + ulong bxcf; + u32 *membase; + +#if defined(SDRAM_R0BAS) + /* BAS from Memory Queue rank reg. */ + membase = + (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num))); + bxcf = 0; /* just to satisfy the compiler */ +#else + /* BAS from SDRAM_MBxCF mem rank reg. */ + mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf); + membase = (u32 *)((bxcf & 0xfff80000) << 3); +#endif + + return membase; +} + +static inline void ecc_clear_status_reg(void) +{ + mtsdram(SDRAM_ECCCR, 0xffffffff); +#if defined(SDRAM_R0BAS) + mtdcr(SDRAM_ERRSTATLL, 0xffffffff); +#endif +} + +static int ecc_check_status_reg(void) +{ + u32 ecc_status; + + /* + * Compare suceeded, now check + * if got ecc error. If got an + * ecc error, then don't count + * this as a passing value + */ + mfsdram(SDRAM_ECCCR, ecc_status); + if (ecc_status != 0x00000000) { + /* clear on error */ + ecc_clear_status_reg(); + /* ecc check failure */ + return 0; + } + ecc_clear_status_reg(); + sync(); + + return 1; +} + +/* return 1 if passes, 0 if fail */ +static int short_mem_test(u32 *base_address) +{ + int i, j, l; + u32 ecc_mode = 0; + + ulong test[NUMMEMTESTS][NUMMEMWORDS] = { + /* 0 */ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF}, + /* 1 */ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000}, + /* 2 */ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555}, + /* 3 */ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA}, + /* 4 */ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A}, + /* 5 */ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5}, + /* 6 */ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA}, + /* 7 */ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}, + +#if defined(CFG_DECREMENT_PATTERNS) + /* 8 */ {0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff}, + /* 9 */ {0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe, + 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe, + 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe, + 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe}, + /* 10 */{0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd, + 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd, + 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd, + 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd}, + /* 11 */{0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, + 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, + 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, + 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc}, + /* 12 */{0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb, + 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb, + 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb, + 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb}, + /* 13 */{0xfffafffa, 0xfffafffa, 0xfffffffa, 0xfffafffa, + 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa, + 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa, + 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa}, + /* 14 */{0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, + 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, + 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, + 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9}, + /* 15 */{0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, + 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, + 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, + 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8}, + /* 16 */{0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7, + 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7, + 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7, + 0xfff7ffff, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7}, + /* 17 */{0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7, + 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7, + 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7, + 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7}, + /* 18 */{0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5, + 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5, + 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5, + 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5}, + /* 19 */{0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4, + 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4, + 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4, + 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4}, + /* 20 */{0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3, + 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3, + 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3, + 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3}, + /* 21 */{0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2, + 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2, + 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2, + 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2}, + /* 22 */{0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1, + 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1, + 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1, + 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1}, + /* 23 */{0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, + 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, + 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, + 0xfff0fff0, 0xfff0fffe, 0xfff0fff0, 0xfff0fff0}, +#endif /* CFG_DECREMENT_PATTERNS */ + }; + + mfsdram(SDRAM_MCOPT1, ecc_mode); + if ((ecc_mode & SDRAM_MCOPT1_MCHK_CHK_REP) == + SDRAM_MCOPT1_MCHK_CHK_REP) { + ecc_clear_status_reg(); + sync(); + ecc_mode = 1; + } else { + ecc_mode = 0; + } + + /* + * Run the short memory test. + */ + for (i = 0; i < NUMMEMTESTS; i++) { + for (j = 0; j < NUMMEMWORDS; j++) { + base_address[j] = test[i][j]; + ppcDcbf((ulong)&(base_address[j])); + } + sync(); + for (l = 0; l < NUMLOOPS; l++) { + for (j = 0; j < NUMMEMWORDS; j++) { + if (base_address[j] != test[i][j]) { + ppcDcbf((u32)&(base_address[j])); + return 0; + } else { + if (ecc_mode) { + if (!ecc_check_status_reg()) + return 0; + } + } + ppcDcbf((u32)&(base_address[j])); + } /* for (j = 0; j < NUMMEMWORDS; j++) */ + sync(); + } /* for (l=0; l<NUMLOOPS; l++) */ + } + + return 1; +} + +#if defined(CONFIG_PPC4xx_DDR_METHOD_A) +/*-----------------------------------------------------------------------------+ +| program_DQS_calibration_methodA. ++-----------------------------------------------------------------------------*/ +static u32 program_DQS_calibration_methodA(struct ddrautocal *ddrcal) +{ + u32 pass_result = 0; + +#ifdef DEBUG + ulong temp; + + mfsdram(SDRAM_RDCC, temp); + debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp); +#endif + + pass_result = DQS_calibration_methodA(ddrcal); + + return pass_result; +} + +/* + * DQS_calibration_methodA() + * + * Autocalibration Method A + * + * ARRAY [Entire DQS Range] DQS_Valid_Window ; initialized to all zeros + * ARRAY [Entire FDBK Range] FDBK_Valid_Window; initialized to all zeros + * MEMWRITE(addr, expected_data); + * for (i = 0; i < Entire DQS Range; i++) { RQDC.RQFD + * for (j = 0; j < Entire FDBK Range; j++) { RFDC.RFFD + * MEMREAD(addr, actual_data); + * if (actual_data == expected_data) { + * DQS_Valid_Window[i] = 1; RQDC.RQFD + * FDBK_Valid_Window[i][j] = 1; RFDC.RFFD + * } + * } + * } + */ +static u32 DQS_calibration_methodA(struct ddrautocal *cal) +{ + ulong rfdc_reg; + ulong rffd; + + ulong rqdc_reg; + ulong rqfd; + + u32 *membase; + ulong bxcf; + int rqfd_average; + int bxcr_num; + int rffd_average; + int pass; + u32 passed = 0; + + int in_window; + struct autocal_regs curr_win_min; + struct autocal_regs curr_win_max; + struct autocal_regs best_win_min; + struct autocal_regs best_win_max; + struct autocal_regs loop_win_min; + struct autocal_regs loop_win_max; + +#ifdef DEBUG + ulong temp; +#endif + ulong rdcc; + + char slash[] = "\\|/-\\|/-"; + int loopi = 0; + + /* start */ + in_window = 0; + + memset(&curr_win_min, 0, sizeof(curr_win_min)); + memset(&curr_win_max, 0, sizeof(curr_win_max)); + memset(&best_win_min, 0, sizeof(best_win_min)); + memset(&best_win_max, 0, sizeof(best_win_max)); + memset(&loop_win_min, 0, sizeof(loop_win_min)); + memset(&loop_win_max, 0, sizeof(loop_win_max)); + + rdcc = 0; + + /* + * Program RDCC register + * Read sample cycle auto-update enable + */ + mtsdram(SDRAM_RDCC, SDRAM_RDCC_RDSS_T1 | SDRAM_RDCC_RSAE_ENABLE); + +#ifdef DEBUG + mfsdram(SDRAM_RDCC, temp); + debug("<%s>SDRAM_RDCC=0x%x\n", __func__, temp); + mfsdram(SDRAM_RTSR, temp); + debug("<%s>SDRAM_RTSR=0x%x\n", __func__, temp); + mfsdram(SDRAM_FCSR, temp); + debug("<%s>SDRAM_FCSR=0x%x\n", __func__, temp); +#endif + + /* + * Program RQDC register + * Internal DQS delay mechanism enable + */ + mtsdram(SDRAM_RQDC, + SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x00)); + +#ifdef DEBUG + mfsdram(SDRAM_RQDC, temp); + debug("<%s>SDRAM_RQDC=0x%x\n", __func__, temp); +#endif + + /* + * Program RFDC register + * Set Feedback Fractional Oversample + * Auto-detect read sample cycle enable + */ + mtsdram(SDRAM_RFDC, SDRAM_RFDC_ARSE_ENABLE | + SDRAM_RFDC_RFOS_ENCODE(0) | SDRAM_RFDC_RFFD_ENCODE(0)); + +#ifdef DEBUG + mfsdram(SDRAM_RFDC, temp); + debug("<%s>SDRAM_RFDC=0x%x\n", __func__, temp); +#endif + + putc(' '); + for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) { + + mfsdram(SDRAM_RQDC, rqdc_reg); + rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK); + mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd)); + + putc('\b'); + putc(slash[loopi++ % 8]); + + curr_win_min.rffd = 0; + curr_win_max.rffd = 0; + in_window = 0; + + for (rffd = 0, pass = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) { + mfsdram(SDRAM_RFDC, rfdc_reg); + rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK); + mtsdram(SDRAM_RFDC, + rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd)); + + for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) { + mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf); + + /* Banks enabled */ + if (bxcf & SDRAM_BXCF_M_BE_MASK) { + /* Bank is enabled */ + membase = get_membase(bxcr_num); + pass = short_mem_test(membase); + } /* if bank enabled */ + } /* for bxcr_num */ + + /* If this value passed update RFFD windows */ + if (pass && !in_window) { /* at the start of window */ + in_window = 1; + curr_win_min.rffd = curr_win_max.rffd = rffd; + curr_win_min.rqfd = curr_win_max.rqfd = rqfd; + mfsdram(SDRAM_RDCC, rdcc); /*record this value*/ + } else if (!pass && in_window) { /* at end of window */ + in_window = 0; + } else if (pass && in_window) { /* within the window */ + curr_win_max.rffd = rffd; + curr_win_max.rqfd = rqfd; + } + /* else if (!pass && !in_window) + skip - no pass, not currently in a window */ + + if (in_window) { + if ((curr_win_max.rffd - curr_win_min.rffd) > + (best_win_max.rffd - best_win_min.rffd)) { + best_win_min.rffd = curr_win_min.rffd; + best_win_max.rffd = curr_win_max.rffd; + + best_win_min.rqfd = curr_win_min.rqfd; + best_win_max.rqfd = curr_win_max.rqfd; + cal->rdcc = rdcc; + } + passed = 1; + } + } /* RFDC.RFFD */ + + /* + * save-off the best window results of the RFDC.RFFD + * for this RQDC.RQFD setting + */ + /* + * if (just ended RFDC.RFDC loop pass window) > + * (prior RFDC.RFFD loop pass window) + */ + if ((best_win_max.rffd - best_win_min.rffd) > + (loop_win_max.rffd - loop_win_min.rffd)) { + loop_win_min.rffd = best_win_min.rffd; + loop_win_max.rffd = best_win_max.rffd; + loop_win_min.rqfd = rqfd; + loop_win_max.rqfd = rqfd; + debug("RQFD.min 0x%08x, RQFD.max 0x%08x, " + "RFFD.min 0x%08x, RFFD.max 0x%08x\n", + loop_win_min.rqfd, loop_win_max.rqfd, + loop_win_min.rffd, loop_win_max.rffd); + } + } /* RQDC.RQFD */ + + putc('\b'); + + debug("\n"); + + if ((loop_win_min.rffd == 0) && (loop_win_max.rffd == 0) && + (best_win_min.rffd == 0) && (best_win_max.rffd == 0) && + (best_win_min.rqfd == 0) && (best_win_max.rqfd == 0)) { + passed = 0; + } + + /* + * Need to program RQDC before RFDC. + */ + debug("<%s> RQFD Min: 0x%x\n", __func__, loop_win_min.rqfd); + debug("<%s> RQFD Max: 0x%x\n", __func__, loop_win_max.rqfd); + rqfd_average = loop_win_max.rqfd; + + if (rqfd_average < 0) + rqfd_average = 0; + + if (rqfd_average > SDRAM_RQDC_RQFD_MAX) + rqfd_average = SDRAM_RQDC_RQFD_MAX; + + debug("<%s> RFFD average: 0x%08x\n", __func__, rqfd_average); + mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) | + SDRAM_RQDC_RQFD_ENCODE(rqfd_average)); + + debug("<%s> RFFD Min: 0x%08x\n", __func__, loop_win_min.rffd); + debug("<%s> RFFD Max: 0x%08x\n", __func__, loop_win_max.rffd); + rffd_average = ((loop_win_min.rffd + loop_win_max.rffd) / 2); + + if (rffd_average < 0) + rffd_average = 0; + + if (rffd_average > SDRAM_RFDC_RFFD_MAX) + rffd_average = SDRAM_RFDC_RFFD_MAX; + + debug("<%s> RFFD average: 0x%08x\n", __func__, rffd_average); + mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average)); + + /* if something passed, then return the size of the largest window */ + if (passed != 0) { + passed = loop_win_max.rffd - loop_win_min.rffd; + cal->rqfd = rqfd_average; + cal->rffd = rffd_average; + cal->rffd_min = loop_win_min.rffd; + cal->rffd_max = loop_win_max.rffd; + } + + return (u32)passed; +} + +#else /* !defined(CONFIG_PPC4xx_DDR_METHOD_A) */ + +/*-----------------------------------------------------------------------------+ +| program_DQS_calibration_methodB. ++-----------------------------------------------------------------------------*/ +static u32 program_DQS_calibration_methodB(struct ddrautocal *ddrcal) +{ + u32 pass_result = 0; + +#ifdef DEBUG + ulong temp; +#endif + + /* + * Program RDCC register + * Read sample cycle auto-update enable + */ + mtsdram(SDRAM_RDCC, SDRAM_RDCC_RDSS_T2 | SDRAM_RDCC_RSAE_ENABLE); + +#ifdef DEBUG + mfsdram(SDRAM_RDCC, temp); + debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp); +#endif + + /* + * Program RQDC register + * Internal DQS delay mechanism enable + */ + mtsdram(SDRAM_RQDC, +#if defined(CONFIG_DDR_RQDC_START_VAL) + SDRAM_RQDC_RQDE_ENABLE | + SDRAM_RQDC_RQFD_ENCODE(CONFIG_DDR_RQDC_START_VAL)); +#else + SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x38)); +#endif + +#ifdef DEBUG + mfsdram(SDRAM_RQDC, temp); + debug("<%s>SDRAM_RQDC=0x%08x\n", __func__, temp); +#endif + + /* + * Program RFDC register + * Set Feedback Fractional Oversample + * Auto-detect read sample cycle enable + */ + mtsdram(SDRAM_RFDC, SDRAM_RFDC_ARSE_ENABLE | + SDRAM_RFDC_RFOS_ENCODE(0) | + SDRAM_RFDC_RFFD_ENCODE(0)); + +#ifdef DEBUG + mfsdram(SDRAM_RFDC, temp); + debug("<%s>SDRAM_RFDC=0x%08x\n", __func__, temp); +#endif + + pass_result = DQS_calibration_methodB(ddrcal); + + return pass_result; +} + +/* + * DQS_calibration_methodB() + * + * Autocalibration Method B + * + * ARRAY [Entire DQS Range] DQS_Valid_Window ; initialized to all zeros + * ARRAY [Entire Feedback Range] FDBK_Valid_Window; initialized to all zeros + * MEMWRITE(addr, expected_data); + * Initialialize the DQS delay to 80 degrees (MCIF0_RRQDC[RQFD]=0x38). + * + * for (j = 0; j < Entire Feedback Range; j++) { + * MEMREAD(addr, actual_data); + * if (actual_data == expected_data) { + * FDBK_Valid_Window[j] = 1; + * } + * } + * + * Set MCIF0_RFDC[RFFD] to the middle of the FDBK_Valid_Window. + * + * for (i = 0; i < Entire DQS Range; i++) { + * MEMREAD(addr, actual_data); + * if (actual_data == expected_data) { + * DQS_Valid_Window[i] = 1; + * } + * } + * + * Set MCIF0_RRQDC[RQFD] to the middle of the DQS_Valid_Window. + */ +/*-----------------------------------------------------------------------------+ +| DQS_calibration_methodB. ++-----------------------------------------------------------------------------*/ +static u32 DQS_calibration_methodB(struct ddrautocal *cal) +{ + ulong rfdc_reg; + ulong rffd; + + ulong rqdc_reg; + ulong rqfd; + + ulong rdcc; + + u32 *membase; + ulong bxcf; + int rqfd_average; + int bxcr_num; + int rffd_average; + int pass; + uint passed = 0; + + int in_window; + u32 curr_win_min, curr_win_max; + u32 best_win_min, best_win_max; + u32 size = 0; + + /*------------------------------------------------------------------ + | Test to determine the best read clock delay tuning bits. + | + | Before the DDR controller can be used, the read clock delay needs to + | be set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD]. + | This value cannot be hardcoded into the program because it changes + | depending on the board's setup and environment. + | To do this, all delay values are tested to see if they + | work or not. By doing this, you get groups of fails with groups of + | passing values. The idea is to find the start and end of a passing + | window and take the center of it to use as the read clock delay. + | + | A failure has to be seen first so that when we hit a pass, we know + | that it is truely the start of the window. If we get passing values + | to start off with, we don't know if we are at the start of the window + | + | The code assumes that a failure will always be found. + | If a failure is not found, there is no easy way to get the middle + | of the passing window. I guess we can pretty much pick any value + | but some values will be better than others. Since the lowest speed + | we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed), + | from experimentation it is safe to say you will always have a failure + +-----------------------------------------------------------------*/ + + debug("\n\n"); + + in_window = 0; + rdcc = 0; + + curr_win_min = curr_win_max = 0; + best_win_min = best_win_max = 0; + for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) { + mfsdram(SDRAM_RFDC, rfdc_reg); + rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK); + mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd)); + + pass = 1; + for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) { + mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf); + + /* Banks enabled */ + if (bxcf & SDRAM_BXCF_M_BE_MASK) { + /* Bank is enabled */ + membase = get_membase(bxcr_num); + pass &= short_mem_test(membase); + } /* if bank enabled */ + } /* for bxcf_num */ + + /* If this value passed */ + if (pass && !in_window) { /* start of passing window */ + in_window = 1; + curr_win_min = curr_win_max = rffd; + mfsdram(SDRAM_RDCC, rdcc); /* record this value */ + } else if (!pass && in_window) { /* end passing window */ + in_window = 0; + } else if (pass && in_window) { /* within the passing window */ + curr_win_max = rffd; + } + + if (in_window) { + if ((curr_win_max - curr_win_min) > + (best_win_max - best_win_min)) { + best_win_min = curr_win_min; + best_win_max = curr_win_max; + cal->rdcc = rdcc; + } + passed = 1; + } + } /* for rffd */ + + if ((best_win_min == 0) && (best_win_max == 0)) + passed = 0; + else + size = best_win_max - best_win_min; + + debug("RFFD Min: 0x%x\n", best_win_min); + debug("RFFD Max: 0x%x\n", best_win_max); + rffd_average = ((best_win_min + best_win_max) / 2); + + cal->rffd_min = best_win_min; + cal->rffd_max = best_win_max; + + if (rffd_average < 0) + rffd_average = 0; + + if (rffd_average > SDRAM_RFDC_RFFD_MAX) + rffd_average = SDRAM_RFDC_RFFD_MAX; + + mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average)); + + rffd = rffd_average; + in_window = 0; + + curr_win_min = curr_win_max = 0; + best_win_min = best_win_max = 0; + for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) { + mfsdram(SDRAM_RQDC, rqdc_reg); + rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK); + mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd)); + + pass = 1; + for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) { + + mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf); + + /* Banks enabled */ + if (bxcf & SDRAM_BXCF_M_BE_MASK) { + /* Bank is enabled */ + membase = get_membase(bxcr_num); + pass &= short_mem_test(membase); + } /* if bank enabled */ + } /* for bxcf_num */ + + /* If this value passed */ + if (pass && !in_window) { + in_window = 1; + curr_win_min = curr_win_max = rqfd; + } else if (!pass && in_window) { + in_window = 0; + } else if (pass && in_window) { + curr_win_max = rqfd; + } + + if (in_window) { + if ((curr_win_max - curr_win_min) > + (best_win_max - best_win_min)) { + best_win_min = curr_win_min; + best_win_max = curr_win_max; + } + passed = 1; + } + } /* for rqfd */ + + if ((best_win_min == 0) && (best_win_max == 0)) + passed = 0; + + debug("RQFD Min: 0x%x\n", best_win_min); + debug("RQFD Max: 0x%x\n", best_win_max); + rqfd_average = ((best_win_min + best_win_max) / 2); + + if (rqfd_average < 0) + rqfd_average = 0; + + if (rqfd_average > SDRAM_RQDC_RQFD_MAX) + rqfd_average = SDRAM_RQDC_RQFD_MAX; + + mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) | + SDRAM_RQDC_RQFD_ENCODE(rqfd_average)); + + mfsdram(SDRAM_RQDC, rqdc_reg); + mfsdram(SDRAM_RFDC, rfdc_reg); + + /* + * Need to program RQDC before RFDC. The value is read above. + * That is the reason why auto cal not work. + * See, comments below. + */ + mtsdram(SDRAM_RQDC, rqdc_reg); + mtsdram(SDRAM_RFDC, rfdc_reg); + + debug("RQDC: 0x%08X\n", rqdc_reg); + debug("RFDC: 0x%08X\n", rfdc_reg); + + /* if something passed, then return the size of the largest window */ + if (passed != 0) { + passed = size; + cal->rqfd = rqfd_average; + cal->rffd = rffd_average; + } + + return (uint)passed; +} +#endif /* defined(CONFIG_PPC4xx_DDR_METHOD_A) */ + +/* + * Default table for DDR auto-calibration of all + * possible WRDTR and CLKTR values. + * Table format is: + * {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]} + * + * Table is terminated with {-1, -1} value pair. + * + * Board vendors can specify their own board specific subset of + * known working {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]} value + * pairs via a board defined ddr_scan_option() function. + */ +struct sdram_timing full_scan_options[] = { + {0, 0}, {0, 1}, {0, 2}, {0, 3}, + {1, 0}, {1, 1}, {1, 2}, {1, 3}, + {2, 0}, {2, 1}, {2, 2}, {2, 3}, + {3, 0}, {3, 1}, {3, 2}, {3, 3}, + {4, 0}, {4, 1}, {4, 2}, {4, 3}, + {5, 0}, {5, 1}, {5, 2}, {5, 3}, + {6, 0}, {6, 1}, {6, 2}, {6, 3}, + {-1, -1} +}; + +/*---------------------------------------------------------------------------+ +| DQS_calibration. ++----------------------------------------------------------------------------*/ +u32 DQS_autocalibration(void) +{ + u32 wdtr; + u32 clkp; + u32 result = 0; + u32 best_result = 0; + u32 best_rdcc; + struct ddrautocal ddrcal; + struct autocal_clks tcal; + ulong rfdc_reg; + ulong rqdc_reg; + u32 val; + int verbose_lvl = 0; + char *str; + char slash[] = "\\|/-\\|/-"; + int loopi = 0; + struct sdram_timing *scan_list; + +#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION) + int i; + char tmp[64]; /* long enough for environment variables */ +#endif + + memset(&tcal, 0, sizeof(tcal)); + + ddr_scan_option((ulong)full_scan_options); + + scan_list = + (struct sdram_timing *)ddr_scan_option((ulong)full_scan_options); + + mfsdram(SDRAM_MCOPT1, val); + if ((val & SDRAM_MCOPT1_MCHK_CHK_REP) == SDRAM_MCOPT1_MCHK_CHK_REP) + str = "ECC Auto calibration -"; + else + str = "Auto calibration -"; + + puts(str); + +#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION) + i = getenv_r("autocalib", tmp, sizeof(tmp)); + if (i < 0) + strcpy(tmp, CONFIG_AUTOCALIB); + + if (strcmp(tmp, "final") == 0) { + /* display the final autocalibration results only */ + verbose_lvl = 1; + } else if (strcmp(tmp, "loop") == 0) { + /* display summary autocalibration info per iteration */ + verbose_lvl = 2; + } else if (strcmp(tmp, "display") == 0) { + /* display full debug autocalibration window info. */ + verbose_lvl = 3; + } +#endif /* (DEBUG_PPC4xx_DDR_AUTOCALIBRATION) */ + + best_rdcc = (SDRAM_RDCC_RDSS_T4 >> 30); + + while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) { + wdtr = scan_list->wrdtr; + clkp = scan_list->clktr; + + mfsdram(SDRAM_WRDTR, val); + val &= ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK); + mtsdram(SDRAM_WRDTR, (val | + ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | (wdtr << 25)))); + + mtsdram(SDRAM_CLKTR, clkp << 30); + + putc('\b'); + putc(slash[loopi++ % 8]); + +#ifdef DEBUG + debug("\n"); + debug("*** --------------\n"); + mfsdram(SDRAM_WRDTR, val); + debug("*** SDRAM_WRDTR set to 0x%08x\n", val); + mfsdram(SDRAM_CLKTR, val); + debug("*** SDRAM_CLKTR set to 0x%08x\n", val); +#endif + + debug("\n"); + if (verbose_lvl > 2) { + printf("*** SDRAM_WRDTR (wdtr) set to %d\n", wdtr); + printf("*** SDRAM_CLKTR (clkp) set to %d\n", clkp); + } + + memset(&ddrcal, 0, sizeof(ddrcal)); + + /* + * DQS calibration. + */ + /* + * program_DQS_calibration_method[A|B]() returns 0 if no + * passing RFDC.[RFFD] window is found or returns the size + * of the best passing window; in the case of a found passing + * window, the ddrcal will contain the values of the best + * window RQDC.[RQFD] and RFDC.[RFFD]. + */ + + /* + * Call PPC4xx SDRAM DDR autocalibration methodA or methodB. + * Default is methodB. + * Defined the autocalibration method in the board specific + * header file. + * Please see include/configs/kilauea.h for an example for + * a board specific implementation. + */ +#if defined(CONFIG_PPC4xx_DDR_METHOD_A) + result = program_DQS_calibration_methodA(&ddrcal); +#else + result = program_DQS_calibration_methodB(&ddrcal); +#endif + + sync(); + + /* + * Clear potential errors resulting from auto-calibration. + * If not done, then we could get an interrupt later on when + * exceptions are enabled. + */ + set_mcsr(get_mcsr()); + + val = ddrcal.rdcc; /* RDCC from the best passing window */ + + udelay(100); + + if (verbose_lvl > 1) { + char *tstr; + switch ((val >> 30)) { + case 0: + if (result != 0) + tstr = "T1"; + else + tstr = "N/A"; + break; + case 1: + tstr = "T2"; + break; + case 2: + tstr = "T3"; + break; + case 3: + tstr = "T4"; + break; + default: + tstr = "unknown"; + break; + } + printf("** WRDTR(%d) CLKTR(%d), Wind (%d), best (%d), " + "max-min(0x%04x)(0x%04x), RDCC: %s\n", + wdtr, clkp, result, best_result, + ddrcal.rffd_min, ddrcal.rffd_max, tstr); + } + + /* + * The DQS calibration "result" is either "0" + * if no passing window was found, or is the + * size of the RFFD passing window. + */ + if (result != 0) { + tcal.autocal.flags = 1; + debug("*** (%d)(%d) result passed window size: 0x%08x, " + "rqfd = 0x%08x, rffd = 0x%08x, rdcc = 0x%08x\n", + wdtr, clkp, result, ddrcal.rqfd, + ddrcal.rffd, ddrcal.rdcc); + /* + * Save the SDRAM_WRDTR and SDRAM_CLKTR + * settings for the largest returned + * RFFD passing window size. + */ + if (result > best_result) { + /* + * want the lowest Read Sample Cycle Select + */ + val = (val & SDRAM_RDCC_RDSS_MASK) >> 30; + debug("*** (%d) (%d) current_rdcc, best_rdcc\n", + val, best_rdcc); + if (val <= best_rdcc) { + best_rdcc = val; + tcal.clocks.wrdtr = wdtr; + tcal.clocks.clktr = clkp; + tcal.clocks.rdcc = (val << 30); + tcal.autocal.rqfd = ddrcal.rqfd; + tcal.autocal.rffd = ddrcal.rffd; + best_result = result; + + if (verbose_lvl > 2) { + printf("** (%d)(%d) " + "best result: 0x%04x\n", + wdtr, clkp, + best_result); + printf("** (%d)(%d) " + "best WRDTR: 0x%04x\n", + wdtr, clkp, + tcal.clocks.wrdtr); + printf("** (%d)(%d) " + "best CLKTR: 0x%04x\n", + wdtr, clkp, + tcal.clocks.clktr); + printf("** (%d)(%d) " + "best RQDC: 0x%04x\n", + wdtr, clkp, + tcal.autocal.rqfd); + printf("** (%d)(%d) " + "best RFDC: 0x%04x\n", + wdtr, clkp, + tcal.autocal.rffd); + printf("** (%d)(%d) " + "best RDCC: 0x%08x\n", + wdtr, clkp, + (u32)tcal.clocks.rdcc); + mfsdram(SDRAM_RTSR, val); + printf("** (%d)(%d) best " + "loop RTSR: 0x%08x\n", + wdtr, clkp, val); + mfsdram(SDRAM_FCSR, val); + printf("** (%d)(%d) best " + "loop FCSR: 0x%08x\n", + wdtr, clkp, val); + } + } /* if (val <= best_rdcc) */ + } /* if (result >= best_result) */ + } /* if (result != 0) */ + scan_list++; + } /* while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) */ + + if (tcal.autocal.flags == 1) { + if (verbose_lvl > 0) { + printf("*** --------------\n"); + printf("*** best_result window size: %d\n", + best_result); + printf("*** best_result WRDTR: 0x%04x\n", + tcal.clocks.wrdtr); + printf("*** best_result CLKTR: 0x%04x\n", + tcal.clocks.clktr); + printf("*** best_result RQFD: 0x%04x\n", + tcal.autocal.rqfd); + printf("*** best_result RFFD: 0x%04x\n", + tcal.autocal.rffd); + printf("*** best_result RDCC: 0x%04x\n", + tcal.clocks.rdcc); + printf("*** --------------\n"); + printf("\n"); + } + + /* + * if got best passing result window, then lock in the + * best CLKTR, WRDTR, RQFD, and RFFD values + */ + mfsdram(SDRAM_WRDTR, val); + mtsdram(SDRAM_WRDTR, (val & + ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) | + ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | + (tcal.clocks.wrdtr << 25))); + + mtsdram(SDRAM_CLKTR, tcal.clocks.clktr << 30); + + mfsdram(SDRAM_RQDC, rqdc_reg); + rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK); + mtsdram(SDRAM_RQDC, rqdc_reg | + SDRAM_RQDC_RQFD_ENCODE(tcal.autocal.rqfd)); + + mfsdram(SDRAM_RQDC, rqdc_reg); + debug("*** best_result: read value SDRAM_RQDC 0x%08x\n", + rqdc_reg); + + mfsdram(SDRAM_RFDC, rfdc_reg); + rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK); + mtsdram(SDRAM_RFDC, rfdc_reg | + SDRAM_RFDC_RFFD_ENCODE(tcal.autocal.rffd)); + + mfsdram(SDRAM_RFDC, rfdc_reg); + debug("*** best_result: read value SDRAM_RFDC 0x%08x\n", + rfdc_reg); + mfsdram(SDRAM_RDCC, val); + debug("*** SDRAM_RDCC 0x%08x\n", val); + } else { + /* + * no valid windows were found + */ + printf("DQS memory calibration window can not be determined, " + "terminating u-boot.\n"); + ppc4xx_ibm_ddr2_register_dump(); + spd_ddr_init_hang(); + } + + blank_string(strlen(str)); + + return 0; +} +#else /* defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */ +u32 DQS_autocalibration(void) +{ + return 0; +} +#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */ +#endif /* defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */ diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile index c773400a5..463b57566 100644 --- a/cpu/ppc4xx/Makefile +++ b/cpu/ppc4xx/Makefile @@ -35,6 +35,9 @@ SOBJS += kgdb.o COBJS := 40x_spd_sdram.o COBJS += 44x_spd_ddr.o COBJS += 44x_spd_ddr2.o +ifdef CONFIG_PPC4xx_DDR_AUTOCALIBRATION +COBJS += 4xx_ibm_ddr2_autocalib.o +endif COBJS += 4xx_pci.o COBJS += 4xx_pcie.o COBJS += bedbug_405.o diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c index c8827201e..84b1bbe54 100644 --- a/cpu/ppc4xx/miiphy.c +++ b/cpu/ppc4xx/miiphy.c @@ -180,8 +180,10 @@ int phy_setup_aneg (char *devname, unsigned char addr) * * sr: Currently on 460EX only EMAC0 works with MDIO, so we always * return EMAC0 offset here + * vg: For 460EX/460GT if internal GPCS PHY address is specified + * return appropriate EMAC offset */ -unsigned int miiphy_getemac_offset (void) +unsigned int miiphy_getemac_offset(u8 addr) { #if (defined(CONFIG_440) && \ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \ @@ -233,6 +235,35 @@ unsigned int miiphy_getemac_offset (void) return 0x100; #endif +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) + u32 eoffset = 0; + + switch (addr) { +#if defined(CONFIG_HAS_ETH1) && defined(CONFIG_GPCS_PHY1_ADDR) + case CONFIG_GPCS_PHY1_ADDR: + if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x100))) + eoffset = 0x100; + break; +#endif +#if defined(CONFIG_HAS_ETH2) && defined(CONFIG_GPCS_PHY2_ADDR) + case CONFIG_GPCS_PHY2_ADDR: + if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x300))) + eoffset = 0x300; + break; +#endif +#if defined(CONFIG_HAS_ETH3) && defined(CONFIG_GPCS_PHY3_ADDR) + case CONFIG_GPCS_PHY3_ADDR: + if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x400))) + eoffset = 0x400; + break; +#endif + default: + eoffset = 0; + break; + } + return eoffset; +#endif + return 0; #endif } @@ -262,7 +293,7 @@ static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value) u32 emac_reg; u32 sta_reg; - emac_reg = miiphy_getemac_offset(); + emac_reg = miiphy_getemac_offset(addr); /* wait for completion */ if (emac_miiphy_wait(emac_reg) != 0) @@ -311,7 +342,7 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg, unsigned long sta_reg; unsigned long emac_reg; - emac_reg = miiphy_getemac_offset (); + emac_reg = miiphy_getemac_offset(addr); if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0) return -1; |