diff options
Diffstat (limited to 'cpu')
| -rw-r--r-- | cpu/arm920t/at91rm9200/lowlevel_init.S | 158 | ||||
| -rw-r--r-- | cpu/mpc824x/Makefile | 2 | ||||
| -rw-r--r-- | cpu/mpc85xx/cpu.c | 31 | ||||
| -rw-r--r-- | cpu/mpc85xx/fdt.c | 8 | ||||
| -rw-r--r-- | cpu/mpc85xx/release.S | 1 | ||||
| -rw-r--r-- | cpu/mpc85xx/speed.c | 27 | ||||
| -rw-r--r-- | cpu/mpc85xx/start.S | 16 | ||||
| -rw-r--r-- | cpu/mpc85xx/tlb.c | 40 | ||||
| -rw-r--r-- | cpu/mpc86xx/cpu.c | 21 | ||||
| -rw-r--r-- | cpu/mpc86xx/fdt.c | 7 | ||||
| -rw-r--r-- | cpu/mpc86xx/speed.c | 19 | ||||
| -rw-r--r-- | cpu/sh2/Makefile | 21 |
12 files changed, 197 insertions, 154 deletions
diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S index 66b07da08..0913284e7 100644 --- a/cpu/arm920t/at91rm9200/lowlevel_init.S +++ b/cpu/arm920t/at91rm9200/lowlevel_init.S @@ -38,33 +38,7 @@ * turn is based on the boot.bin code from ATMEL * */ - -/* flash */ -#define MC_PUIA 0xFFFFFF10 -#define MC_PUP 0xFFFFFF50 -#define MC_PUER 0xFFFFFF54 -#define MC_ASR 0xFFFFFF04 -#define MC_AASR 0xFFFFFF08 -#define EBI_CFGR 0xFFFFFF64 -#define SMC_CSR0 0xFFFFFF70 - -/* clocks */ -#define PLLAR 0xFFFFFC28 -#define PLLBR 0xFFFFFC2C -#define MCKR 0xFFFFFC30 - -#define AT91C_BASE_CKGR 0xFFFFFC20 -#define CKGR_MOR 0 - -/* sdram */ -#define PIOC_ASR 0xFFFFF870 -#define PIOC_BSR 0xFFFFF874 -#define PIOC_PDR 0xFFFFF804 -#define EBI_CSA 0xFFFFFF60 -#define SDRC_CR 0xFFFFFF98 -#define SDRC_MR 0xFFFFFF90 -#define SDRC_TR 0xFFFFFF94 - +#include <asm/arch/AT91RM9200.h> _MTEXT_BASE: #undef START_FROM_MEM @@ -84,7 +58,7 @@ lowlevel_init: #else ldr r0, =0x0000FF00 /* Disable main oscillator, OSCOUNT = 0xFF */ #endif - str r0, [r1, #CKGR_MOR] + str r0, [r1, #AT91C_CKGR_MOR] /* Add loop to compensate Main Oscillator startup time */ ldr r0, =0x00000010 LoopOsc: @@ -134,72 +108,72 @@ LoopOsc: .ltorg SMRDATA: - .word MC_PUIA - .word MC_PUIA_VAL - .word MC_PUP - .word MC_PUP_VAL - .word MC_PUER - .word MC_PUER_VAL - .word MC_ASR - .word MC_ASR_VAL - .word MC_AASR - .word MC_AASR_VAL - .word EBI_CFGR - .word EBI_CFGR_VAL - .word SMC_CSR0 - .word SMC_CSR0_VAL - .word PLLAR - .word PLLAR_VAL - .word PLLBR - .word PLLBR_VAL - .word MCKR - .word MCKR_VAL + .word AT91C_MC_PUIA + .word CONFIG_SYS_MC_PUIA_VAL + .word AT91C_MC_PUP + .word CONFIG_SYS_MC_PUP_VAL + .word AT91C_MC_PUER + .word CONFIG_SYS_MC_PUER_VAL + .word AT91C_MC_ASR + .word CONFIG_SYS_MC_ASR_VAL + .word AT91C_MC_AASR + .word CONFIG_SYS_MC_AASR_VAL + .word AT91C_EBI_CFGR + .word CONFIG_SYS_EBI_CFGR_VAL + .word AT91C_SMC_CSR0 + .word CONFIG_SYS_SMC_CSR0_VAL + .word AT91C_PLLAR + .word CONFIG_SYS_PLLAR_VAL + .word AT91C_PLLBR + .word CONFIG_SYS_PLLBR_VAL + .word AT91C_MCKR + .word CONFIG_SYS_MCKR_VAL /* SMRDATA is 80 bytes long */ /* here there's a delay of 100 */ SMRDATA1: - .word PIOC_ASR - .word PIOC_ASR_VAL - .word PIOC_BSR - .word PIOC_BSR_VAL - .word PIOC_PDR - .word PIOC_PDR_VAL - .word EBI_CSA - .word EBI_CSA_VAL - .word SDRC_CR - .word SDRC_CR_VAL - .word SDRC_MR - .word SDRC_MR_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL1 - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL2 - .word SDRAM1 - .word SDRAM_VAL - .word SDRC_TR - .word SDRC_TR_VAL - .word SDRAM - .word SDRAM_VAL - .word SDRC_MR - .word SDRC_MR_VAL3 - .word SDRAM - .word SDRAM_VAL + .word AT91C_PIOC_ASR + .word CONFIG_SYS_PIOC_ASR_VAL + .word AT91C_PIOC_BSR + .word CONFIG_SYS_PIOC_BSR_VAL + .word AT91C_PIOC_PDR + .word CONFIG_SYS_PIOC_PDR_VAL + .word AT91C_EBI_CSA + .word CONFIG_SYS_EBI_CSA_VAL + .word AT91C_SDRC_CR + .word CONFIG_SYS_SDRC_CR_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL1 + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL2 + .word CONFIG_SYS_SDRAM1 + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_TR + .word CONFIG_SYS_SDRC_TR_VAL + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL + .word AT91C_SDRC_MR + .word CONFIG_SYS_SDRC_MR_VAL3 + .word CONFIG_SYS_SDRAM + .word CONFIG_SYS_SDRAM_VAL /* SMRDATA1 is 176 bytes long */ #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/cpu/mpc824x/Makefile b/cpu/mpc824x/Makefile index f249dd7c3..a57ad12c4 100644 --- a/cpu/mpc824x/Makefile +++ b/cpu/mpc824x/Makefile @@ -44,7 +44,7 @@ $(LIB): $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(obj)bedbug_603e.c: - ln -s $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c + ln -sf $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c ######################################################################### diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 943602f92..15ba7f1c5 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -77,8 +77,6 @@ struct cpu_type *identify_cpu(u32 ver) int checkcpu (void) { sys_info_t sysinfo; - uint lcrr; /* local bus clock ratio register */ - uint clkdiv; /* clock divider portion of lcrr */ uint pvr, svr; uint fam; uint ver; @@ -165,30 +163,11 @@ int checkcpu (void) break; } -#if defined(CONFIG_SYS_LBC_LCRR) - lcrr = CONFIG_SYS_LBC_LCRR; -#else - { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - - lcrr = lbc->lcrr; - } -#endif - clkdiv = lcrr & 0x0f; - if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { -#if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || \ - defined(CONFIG_MPC8572) || defined(CONFIG_MPC8536) - /* - * Yes, the entire PQ38 family use the same - * bit-representation for twice the clock divider values. - */ - clkdiv *= 2; -#endif - printf("LBC:%-4s MHz\n", - strmhz(buf1, sysinfo.freqSystemBus / clkdiv)); - } else { - printf("LBC: unknown (lcrr: 0x%08x)\n", lcrr); - } + if (sysinfo.freqLocalBus > LCRR_CLKDIV) + printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); + else + printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", + sysinfo.freqLocalBus); #ifdef CONFIG_CPM2 printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c index 59aafb1be..69fab9952 100644 --- a/cpu/mpc85xx/fdt.c +++ b/cpu/mpc85xx/fdt.c @@ -28,11 +28,12 @@ #include <fdt_support.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + extern void ft_qe_setup(void *blob); #ifdef CONFIG_MP #include "mp.h" -DECLARE_GLOBAL_DATA_PTR; void ft_fixup_cpu(void *blob, u64 memory_limit) { @@ -231,6 +232,11 @@ void ft_cpu_setup(void *blob, bd_t *bd) "clock-frequency", bd->bi_intfreq, 1); do_fixup_by_prop_u32(blob, "device_type", "soc", 4, "bus-frequency", bd->bi_busfreq, 1); + + do_fixup_by_compat_u32(blob, "fsl,pq3-localbus", + "bus-frequency", gd->lbc_clk, 1); + do_fixup_by_compat_u32(blob, "fsl,elbc", + "bus-frequency", gd->lbc_clk, 1); #ifdef CONFIG_QE ft_qe_setup(blob); #endif diff --git a/cpu/mpc85xx/release.S b/cpu/mpc85xx/release.S index 7c3e8a172..54c936c3e 100644 --- a/cpu/mpc85xx/release.S +++ b/cpu/mpc85xx/release.S @@ -157,6 +157,7 @@ __secondary_start_page: mfspr r0,SPRN_PIR stw r0,ENTRY_PIR(r10) + mtspr IVPR,r12 /* * Coming here, we know the cpu has one TLB mapping in TLB1[0] * which maps 0xfffff000-0xffffffff one-to-one. We set up a diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c index 1e0f4838b..0d55228b6 100644 --- a/cpu/mpc85xx/speed.c +++ b/cpu/mpc85xx/speed.c @@ -28,6 +28,7 @@ #include <common.h> #include <ppc_asm.tmpl> #include <asm/processor.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -37,6 +38,7 @@ void get_sys_info (sys_info_t * sysInfo) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint plat_ratio,e500_ratio,half_freqSystemBus; + uint lcrr_div; plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; @@ -60,6 +62,30 @@ void get_sys_info (sys_info_t * sysInfo) sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ; } #endif + +#if defined(CONFIG_SYS_LBC_LCRR) + /* We will program LCRR to this value later */ + lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; +#else + { + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; + } +#endif + if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { +#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && \ + !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560) + /* + * Yes, the entire PQ38 family use the same + * bit-representation for twice the clock divider values. + */ + lcrr_div *= 2; +#endif + sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div; + } else { + /* In case anyone cares what the unknown value is */ + sysInfo->freqLocalBus = lcrr_div; + } } @@ -82,6 +108,7 @@ int get_clocks (void) gd->cpu_clk = sys_info.freqProcessor; gd->bus_clk = sys_info.freqSystemBus; gd->mem_clk = sys_info.freqDDRBus; + gd->lbc_clk = sys_info.freqLocalBus; /* * The base clock for I2C depends on the actual SOC. Unfortunately, diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index 8fa0ff7a8..80f96773e 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -184,19 +184,19 @@ _start_e500: mtspr DBCR0,r0 #endif - /* create a temp mapping in AS=1 to the boot window */ + /* create a temp mapping in AS=1 to the 4M boot window */ lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@l + lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h + ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l - /* Align the mapping to 16MB */ - lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@l + lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h + ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l - lis r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ + lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l mtspr MAS0,r6 mtspr MAS1,r7 diff --git a/cpu/mpc85xx/tlb.c b/cpu/mpc85xx/tlb.c index a2d16ae2f..25fa9ee8f 100644 --- a/cpu/mpc85xx/tlb.c +++ b/cpu/mpc85xx/tlb.c @@ -26,6 +26,11 @@ #include <common.h> #include <asm/processor.h> #include <asm/mmu.h> +#ifdef CONFIG_ADDR_MAP +#include <addr_map.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; void set_tlb(u8 tlb, u32 epn, u64 rpn, u8 perms, u8 wimge, @@ -47,6 +52,11 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn, mtspr(MAS7, _mas7); #endif asm volatile("isync;msync;tlbwe;isync"); + +#ifdef CONFIG_ADDR_MAP + if ((tlb == 1) && (gd->flags & GD_FLG_RELOC)) + addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), esel); +#endif } void disable_tlb(u8 esel) @@ -67,6 +77,11 @@ void disable_tlb(u8 esel) mtspr(MAS7, _mas7); #endif asm volatile("isync;msync;tlbwe;isync"); + +#ifdef CONFIG_ADDR_MAP + if (gd->flags & GD_FLG_RELOC) + addrmap_set_entry(0, 0, 0, esel); +#endif } void invalidate_tlb(u8 tlb) @@ -91,6 +106,29 @@ void init_tlbs(void) return ; } +#ifdef CONFIG_ADDR_MAP +void init_addr_map(void) +{ + int i; + + for (i = 0; i < num_tlb_entries; i++) { + if (tlb_table[i].tlb == 0) + continue; + + addrmap_set_entry(tlb_table[i].epn, + tlb_table[i].rpn, + (1UL << ((tlb_table[i].tsize * 2) + 10)), + tlb_table[i].esel); + } + + return ; +} +#endif + +#ifndef CONFIG_SYS_DDR_TLB_START +#define CONFIG_SYS_DDR_TLB_START 8 +#endif + unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg) { unsigned int tlb_size; @@ -137,7 +175,7 @@ unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg) * Configure DDR TLB1 entries. * Starting at TLB1 8, use no more than 8 TLB1 entries. */ - ram_tlb_index = 8; + ram_tlb_index = CONFIG_SYS_DDR_TLB_START; ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE; while (ram_tlb_address < (memsize_in_meg * 1024 * 1024) && ram_tlb_index < 16) { diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index 4cace984d..dc53bee58 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -39,8 +39,6 @@ checkcpu(void) uint pvr, svr; uint ver; uint major, minor; - uint lcrr; /* local bus clock ratio register */ - uint clkdiv; /* clock divider portion of lcrr */ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; @@ -100,22 +98,11 @@ checkcpu(void) printf("MPX:%4lu MHz, ", sysinfo.freqSystemBus / 1000000); printf("DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000); -#if defined(CONFIG_SYS_LBC_LCRR) - lcrr = CONFIG_SYS_LBC_LCRR; -#else - { - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile ccsr_lbc_t *lbc = &immap->im_lbc; - - lcrr = lbc->lcrr; - } -#endif - clkdiv = lcrr & 0x0f; - if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { - printf("LBC:%4lu MHz\n", - sysinfo.freqSystemBus / 1000000 / clkdiv); + if (sysinfo.freqLocalBus > LCRR_CLKDIV) { + printf("LBC:%4lu MHz\n", sysinfo.freqLocalBus / 1000000); } else { - printf(" LBC: unknown (lcrr: 0x%08x)\n", lcrr); + printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", + sysinfo.freqLocalBus); } puts(" L2: "); diff --git a/cpu/mpc86xx/fdt.c b/cpu/mpc86xx/fdt.c index 3adfad98c..383b06b5a 100644 --- a/cpu/mpc86xx/fdt.c +++ b/cpu/mpc86xx/fdt.c @@ -29,6 +29,13 @@ void ft_cpu_setup(void *blob, bd_t *bd) do_fixup_by_prop_u32(blob, "device_type", "soc", 4, "bus-frequency", bd->bi_busfreq, 1); +#if defined(CONFIG_MPC8641) + do_fixup_by_compat_u32(blob, "fsl,mpc8641-localbus", + "bus-frequency", gd->lbc_clk, 1); +#endif + do_fixup_by_compat_u32(blob, "fsl,elbc", + "bus-frequency", gd->lbc_clk, 1); + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) \ diff --git a/cpu/mpc86xx/speed.c b/cpu/mpc86xx/speed.c index 415ac9db8..64a3479d7 100644 --- a/cpu/mpc86xx/speed.c +++ b/cpu/mpc86xx/speed.c @@ -28,6 +28,7 @@ #include <common.h> #include <mpc86xx.h> #include <asm/processor.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -39,6 +40,7 @@ void get_sys_info(sys_info_t *sysInfo) volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; uint plat_ratio, e600_ratio; + uint lcrr_div; plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; @@ -90,6 +92,22 @@ void get_sys_info(sys_info_t *sysInfo) sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus; break; } + +#if defined(CONFIG_SYS_LBC_LCRR) + /* We will program LCRR to this value later */ + lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; +#else + { + volatile ccsr_lbc_t *lbc = &immap->im_lbc; + lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; + } +#endif + if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { + sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2); + } else { + /* In case anyone cares what the unknown value is */ + sysInfo->freqLocalBus = lcrr_div; + } } @@ -105,6 +123,7 @@ int get_clocks(void) get_sys_info(&sys_info); gd->cpu_clk = sys_info.freqProcessor; gd->bus_clk = sys_info.freqSystemBus; + gd->lbc_clk = sys_info.freqLocalBus; /* * The base clock for I2C depends on the actual SOC. Unfortunately, diff --git a/cpu/sh2/Makefile b/cpu/sh2/Makefile index e33ba0f2a..346d3285d 100644 --- a/cpu/sh2/Makefile +++ b/cpu/sh2/Makefile @@ -28,18 +28,23 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a -START = start.o -OBJS = cpu.o interrupts.o watchdog.o +SOBJS = start.o +COBJS = cpu.o interrupts.o watchdog.o -all: .depend $(START) $(LIB) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -######################################################################### +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend -.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ +######################################################################### # defines $(obj).depend target include $(SRCTREE)/rules.mk |