diff options
Diffstat (limited to 'cpu/ppc4xx/405gp_pci.c')
| -rw-r--r-- | cpu/ppc4xx/405gp_pci.c | 54 | 
1 files changed, 27 insertions, 27 deletions
| diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 6a4128cd4..64431ab13 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -437,11 +437,11 @@ void pci_440_init (struct pci_controller *hose)  	 * The PCI initialization sequence enable bit must be set ... if not abort  	 * pci setup since updating the bit requires chip reset.  	 *--------------------------------------------------------------------------*/ -#if defined(CONFIG_440GX) +#if defined(CONFIG_440GX) || defined(CONFIG_440SP)  	unsigned long strap;  	mfsdr(sdr_sdstp1,strap); -	if ( (strap & 0x00010000) == 0 ){ +	if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) {  		printf("PCI: SDR0_STRP1[PISE] not set.\n");  		printf("PCI: Configuration aborted.\n");  		return; @@ -450,7 +450,7 @@ void pci_440_init (struct pci_controller *hose)  	unsigned long strap;  	strap = mfdcr(cpc0_strp1); -	if( (strap & 0x00040000) == 0 ){ +	if ((strap & CPC0_STRP1_PISE_MASK) == 0) {  		printf("PCI: CPC0_STRP1[PISE] not set.\n");  		printf("PCI: Configuration aborted.\n");  		return; @@ -466,26 +466,26 @@ void pci_440_init (struct pci_controller *hose)  	pci_set_region(hose->regions + reg_num++,  		       0x00000000, -			   PCIX0_IOBASE, -			   0x10000, -			   PCI_REGION_IO); +		       PCIX0_IOBASE, +		       0x10000, +		       PCI_REGION_IO);  	pci_set_region(hose->regions + reg_num++,  		       CFG_PCI_TARGBASE, -			   CFG_PCI_MEMBASE, -			   0x10000000, -			   PCI_REGION_MEM ); +		       CFG_PCI_MEMBASE, +		       0x10000000, +		       PCI_REGION_MEM );  	hose->region_count = reg_num;  	pci_setup_indirect(hose, PCIX0_CFGADR, PCIX0_CFGDATA);  #if defined(CFG_PCI_PRE_INIT) -    /* Let board change/modify hose & do initial checks */ -    if( pci_pre_init (hose) == 0 ){ -	printf("PCI: Board-specific initialization failed.\n"); -	printf("PCI: Configuration aborted.\n"); -	return; -    } +	/* Let board change/modify hose & do initial checks */ +	if (pci_pre_init (hose) == 0) { +		printf("PCI: Board-specific initialization failed.\n"); +		printf("PCI: Configuration aborted.\n"); +		return; +	}  #endif  	pci_register_hose( hose ); @@ -496,9 +496,9 @@ void pci_440_init (struct pci_controller *hose)  #if defined(CFG_PCI_TARGET_INIT)  	pci_target_init(hose);                /* Let board setup pci target */  #else -    out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); -    out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_ID ); -    out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */ +	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); +	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_ID ); +	out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */  #endif  #if defined(CONFIG_440GX) @@ -524,24 +524,24 @@ void pci_440_init (struct pci_controller *hose)  	out32r( PCIX0_POM0PCIAL, CFG_PCI_MEMBASE );  	out32r( PCIX0_POM0PCIAH, 0x00000000 );  	out32r( PCIX0_POM0SA, 0xf0000001 ); /* 256MB, enabled */ -    out32r( PCIX0_STS, in32r( PCIX0_STS ) & ~0x0000fff8 ); +	out32r( PCIX0_STS, in32r( PCIX0_STS ) & ~0x0000fff8 );  #endif  	/*--------------------------------------------------------------------------+  	 * PCI host configuration -- we don't make any assumptions here ... the -     * _board_must_indicate_ what to do -- there's just too many runtime -     * scenarios in environments like cPCI, PPMC, etc. to make a determination -     * based on hard-coded values or state of arbiter enable. +	 * _board_must_indicate_ what to do -- there's just too many runtime +	 * scenarios in environments like cPCI, PPMC, etc. to make a determination +	 * based on hard-coded values or state of arbiter enable.  	 *--------------------------------------------------------------------------*/ -    if( is_pci_host(hose) ){ +	if (is_pci_host(hose)) {  #ifdef CONFIG_PCI_SCAN_SHOW -	printf("PCI:   Bus Dev VenId DevId Class Int\n"); +		printf("PCI:   Bus Dev VenId DevId Class Int\n");  #endif  #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) -	out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER); +		out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER);  #endif -	hose->last_busno = pci_hose_scan(hose); -    } +		hose->last_busno = pci_hose_scan(hose); +	}  } |