diff options
Diffstat (limited to 'cpu/mpc8xxx/ddr/ctrl_regs.c')
| -rw-r--r-- | cpu/mpc8xxx/ddr/ctrl_regs.c | 40 |
1 files changed, 28 insertions, 12 deletions
diff --git a/cpu/mpc8xxx/ddr/ctrl_regs.c b/cpu/mpc8xxx/ddr/ctrl_regs.c index 250504145..adc4f6ee3 100644 --- a/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -188,12 +188,13 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr) * The DDR3 spec has not tXARD, * we use the tXP instead of it. * tXP=max(3nCK, 7.5ns) for DDR3. - * we use the tXP=6 * spec has not the tAXPD, we use * tAXPD=8, need design to confirm. */ - act_pd_exit_mclk = 6; - pre_pd_exit_mclk = 6; + int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */ + act_pd_exit_mclk = picos_to_mclk(tXP); + /* Mode register MR0[A12] is '1' - fast exit */ + pre_pd_exit_mclk = act_pd_exit_mclk; taxpd_mclk = 8; tmrd_mclk = 4; #else /* CONFIG_FSL_DDR2 */ @@ -575,18 +576,22 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, } /* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */ -static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr) +static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts) { unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */ unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */ #if defined(CONFIG_FSL_DDR3) - unsigned int rtt_wr = 2; /* 120 ohm Rtt_WR */ + unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */ unsigned int srt = 0; /* self-refresh temerature, normal range */ unsigned int asr = 0; /* auto self-refresh disable */ unsigned int cwl = compute_cas_write_latency() - 5; unsigned int pasr = 0; /* partial array self refresh disable */ + if (popts->rtt_override) + rtt_wr = popts->rtt_wr_override_value; + esdmode2 = (0 | ((rtt_wr & 0x3) << 9) | ((srt & 0x1) << 7) @@ -1001,8 +1006,8 @@ static void set_ddr_zq_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int zq_en) } /* DDR Write Leveling Control (DDR_WRLVL_CNTL) */ -static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, - unsigned int wrlvl_en) +static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en, + const memctl_options_t *popts) { /* * First DQS pulse rising edge after margining mode @@ -1029,8 +1034,9 @@ static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, /* tWL_DQSEN min = 25 nCK, we set it 32 */ wrlvl_dqsen = 0x5; /* - * Write leveling sample time at least need 14 clocks - * due to tWLO = 9, we set it 15 clocks + * Write leveling sample time at least need 6 clocks + * higher than tWLO to allow enough time for progagation + * delay and sampling the prime data bits. */ wrlvl_smpl = 0xf; /* @@ -1043,9 +1049,16 @@ static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, * Write leveling start time * The value use for the DQS_ADJUST for the first sample * when write leveling is enabled. - * we set it 1 clock delay */ wrlvl_start = 0x8; + /* + * Override the write leveling sample and start time + * according to specific board + */ + if (popts->wrlvl_override) { + wrlvl_smpl = popts->wrlvl_sample; + wrlvl_start = popts->wrlvl_start; + } } ddr->ddr_wrlvl_cntl = (0 @@ -1184,7 +1197,10 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, /* Don't set up boundaries for other CS * other than CS0, if bank interleaving * is enabled and not CS2+CS3 interleaved. + * But we need to set the ODT_RD_CFG and + * ODT_WR_CFG for CS1_CONFIG here. */ + set_csn_config(i, ddr, popts, dimm_params); break; } @@ -1321,7 +1337,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_sdram_cfg_2(ddr, popts); set_ddr_sdram_mode(ddr, popts, common_dimm, cas_latency, additive_latency); - set_ddr_sdram_mode_2(ddr); + set_ddr_sdram_mode_2(ddr, popts); set_ddr_sdram_interval(ddr, popts, common_dimm); set_ddr_data_init(ddr); set_ddr_sdram_clk_cntl(ddr, popts); @@ -1331,7 +1347,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_timing_cfg_5(ddr); set_ddr_zq_cntl(ddr, zq_en); - set_ddr_wrlvl_cntl(ddr, wrlvl_en); + set_ddr_wrlvl_cntl(ddr, wrlvl_en, popts); set_ddr_sr_cntr(ddr, sr_it); |