summaryrefslogtreecommitdiff
path: root/cpu/mpc86xx/start.S
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mpc86xx/start.S')
-rw-r--r--cpu/mpc86xx/start.S281
1 files changed, 116 insertions, 165 deletions
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index 03f212844..63cc8dbcd 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -32,6 +32,7 @@
*/
#include <config.h>
#include <mpc86xx.h>
+#include <timestamp.h>
#include <version.h>
#include <ppc_asm.tmpl>
@@ -76,7 +77,7 @@
.globl version_string
version_string:
.ascii U_BOOT_VERSION
- .ascii " (", __DATE__, " - ", __TIME__, ")"
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
.ascii CONFIG_IDENT_STRING, "\0"
. = EXC_OFF_SYS_RESET
@@ -179,22 +180,12 @@ _end_of_vectors:
boot_cold:
boot_warm:
-
- /* if this is a multi-core system we need to check which cpu
- * this is, if it is not cpu 0 send the cpu to the linux reset
- * vector */
-#if (CONFIG_NUM_CPUS > 1)
- mfspr r0, MSSCR0
- andi. r0, r0, 0x0020
- rlwinm r0,r0,27,31,31
- mtspr PIR, r0
- beq 1f
-
- bl secondary_cpu_setup
-#endif
-
+ /*
+ * NOTE: Only Cpu 0 will ever come here. Other cores go to an
+ * address specified by the BPTR
+ */
1:
-#ifdef CFG_RAMBOOT
+#ifdef CONFIG_SYS_RAMBOOT
/* disable everything */
li r0, 0
mtspr HID0, r0
@@ -202,10 +193,14 @@ boot_warm:
mtmsr 0
#endif
+ /* Invalidate BATs */
bl invalidate_bats
sync
+ /* Invalidate all of TLB before MMU turn on */
+ bl clear_tlbs
+ sync
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
/* init the L2 cache */
lis r3, L2_INIT@h
ori r3, r3, L2_INIT@l
@@ -218,8 +213,8 @@ boot_warm:
/*
* Calculate absolute address in FLASH and jump there
*------------------------------------------------------*/
- lis r3, CFG_MONITOR_BASE@h
- ori r3, r3, CFG_MONITOR_BASE@l
+ lis r3, CONFIG_SYS_MONITOR_BASE_EARLY@h
+ ori r3, r3, CONFIG_SYS_MONITOR_BASE_EARLY@l
addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
mtlr r3
blr
@@ -245,9 +240,15 @@ in_flash:
*/
/* enable address translation */
- bl enable_addr_trans
- sync
+ mfmsr r5
+ ori r5, r5, (MSR_IR | MSR_DR)
+ lis r3,addr_trans_enabled@h
+ ori r3, r3, addr_trans_enabled@l
+ mtspr SPRN_SRR0,r3
+ mtspr SPRN_SRR1,r5
+ rfi
+addr_trans_enabled:
/* enable and invalidate the data cache */
/* bl l1dcache_enable */
bl dcache_enable
@@ -257,15 +258,19 @@ in_flash:
bl icache_enable
#endif
-#ifdef CFG_INIT_RAM_LOCK
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
bl lock_ram_in_cache
sync
#endif
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+ bl setup_ccsrbar
+#endif
+
/* set up the stack pointer in our newly created
* cache-ram (r1) */
- lis r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@h
- ori r1, r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@l
+ lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
+ ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
li r0, 0 /* Make room for stack frame header and */
stwu r0, -4(r1) /* clear final stack frame so that */
@@ -273,16 +278,6 @@ in_flash:
GET_GOT /* initialize GOT access */
- /* setup the rest of the bats */
- bl setup_bats
- bl clear_tlbs
- sync
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- /* setup ccsrbar */
- bl setup_ccsrbar
-#endif
-
/* run low-level CPU init code (from Flash) */
bl cpu_init_f
sync
@@ -290,7 +285,7 @@ in_flash:
#ifdef RUN_DIAG
/* Load PX_AUX register address in r4 */
- lis r4, 0xf810
+ lis r4, PIXIS_BASE@h
ori r4, r4, 0x6
/* Load contents of PX_AUX in r3 bits 24 to 31*/
lbz r3, 0(r4)
@@ -308,8 +303,8 @@ in_flash:
stb r3, 0(r4)
/* Get the address to jump to in r3*/
- lis r3, CFG_DIAG_ADDR@h
- ori r3, r3, CFG_DIAG_ADDR@l
+ lis r3, CONFIG_SYS_DIAG_ADDR@h
+ ori r3, r3, CONFIG_SYS_DIAG_ADDR@l
/* Load the LR with the branch address */
mtlr r3
@@ -362,45 +357,83 @@ invalidate_bats:
* early_bats:
*
* Set up bats needed early on - this is usually the BAT for the
- * stack-in-cache and the Flash
+ * stack-in-cache, the Flash, and CCSR space
*/
.globl early_bats
early_bats:
+ /* IBAT 3 */
+ lis r4, CONFIG_SYS_IBAT3L@h
+ ori r4, r4, CONFIG_SYS_IBAT3L@l
+ lis r3, CONFIG_SYS_IBAT3U@h
+ ori r3, r3, CONFIG_SYS_IBAT3U@l
+ mtspr IBAT3L, r4
+ mtspr IBAT3U, r3
+ isync
+
+ /* DBAT 3 */
+ lis r4, CONFIG_SYS_DBAT3L@h
+ ori r4, r4, CONFIG_SYS_DBAT3L@l
+ lis r3, CONFIG_SYS_DBAT3U@h
+ ori r3, r3, CONFIG_SYS_DBAT3U@l
+ mtspr DBAT3L, r4
+ mtspr DBAT3U, r3
+ isync
+
/* IBAT 5 */
- lis r4, CFG_IBAT5L@h
- ori r4, r4, CFG_IBAT5L@l
- lis r3, CFG_IBAT5U@h
- ori r3, r3, CFG_IBAT5U@l
+ lis r4, CONFIG_SYS_IBAT5L@h
+ ori r4, r4, CONFIG_SYS_IBAT5L@l
+ lis r3, CONFIG_SYS_IBAT5U@h
+ ori r3, r3, CONFIG_SYS_IBAT5U@l
mtspr IBAT5L, r4
mtspr IBAT5U, r3
isync
/* DBAT 5 */
- lis r4, CFG_DBAT5L@h
- ori r4, r4, CFG_DBAT5L@l
- lis r3, CFG_DBAT5U@h
- ori r3, r3, CFG_DBAT5U@l
+ lis r4, CONFIG_SYS_DBAT5L@h
+ ori r4, r4, CONFIG_SYS_DBAT5L@l
+ lis r3, CONFIG_SYS_DBAT5U@h
+ ori r3, r3, CONFIG_SYS_DBAT5U@l
mtspr DBAT5L, r4
mtspr DBAT5U, r3
isync
/* IBAT 6 */
- lis r4, CFG_IBAT6L@h
- ori r4, r4, CFG_IBAT6L@l
- lis r3, CFG_IBAT6U@h
- ori r3, r3, CFG_IBAT6U@l
+ lis r4, CONFIG_SYS_IBAT6L_EARLY@h
+ ori r4, r4, CONFIG_SYS_IBAT6L_EARLY@l
+ lis r3, CONFIG_SYS_IBAT6U_EARLY@h
+ ori r3, r3, CONFIG_SYS_IBAT6U_EARLY@l
mtspr IBAT6L, r4
mtspr IBAT6U, r3
isync
/* DBAT 6 */
- lis r4, CFG_DBAT6L@h
- ori r4, r4, CFG_DBAT6L@l
- lis r3, CFG_DBAT6U@h
- ori r3, r3, CFG_DBAT6U@l
+ lis r4, CONFIG_SYS_DBAT6L_EARLY@h
+ ori r4, r4, CONFIG_SYS_DBAT6L_EARLY@l
+ lis r3, CONFIG_SYS_DBAT6U_EARLY@h
+ ori r3, r3, CONFIG_SYS_DBAT6U_EARLY@l
mtspr DBAT6L, r4
mtspr DBAT6U, r3
isync
+
+#if(CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+ /* IBAT 7 */
+ lis r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@h
+ ori r4, r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@l
+ lis r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@h
+ ori r3, r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@l
+ mtspr IBAT7L, r4
+ mtspr IBAT7U, r3
+ isync
+
+ /* DBAT 7 */
+ lis r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@h
+ ori r4, r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@l
+ lis r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@h
+ ori r3, r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@l
+ mtspr DBAT7L, r4
+ mtspr DBAT7U, r3
+ isync
+#endif
blr
.globl clear_tlbs
@@ -416,15 +449,6 @@ tlblp:
blt tlblp
blr
- .globl enable_addr_trans
-enable_addr_trans:
- /* enable address translation */
- mfmsr r5
- ori r5, r5, (MSR_IR | MSR_DR)
- mtmsr r5
- isync
- blr
-
.globl disable_addr_trans
disable_addr_trans:
/* disable address translation */
@@ -617,20 +641,19 @@ relocate_code:
mr r1, r3 /* Set new stack pointer */
mr r9, r4 /* Save copy of Global Data pointer */
- mr r2, r9 /* Save for DECLARE_GLOBAL_DATA_PTR */
mr r10, r5 /* Save copy of Destination Address */
mr r3, r5 /* Destination Address */
- lis r4, CFG_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CFG_MONITOR_BASE@l
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
lwz r5, GOT(__init_end)
sub r5, r5, r4
- li r6, CFG_CACHELINE_SIZE /* Cache Line Size */
+ li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
/*
* Fix GOT pointer:
*
- * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
*
* Offset:
*/
@@ -644,16 +667,6 @@ relocate_code:
/*
* Now relocate code
*/
-#ifdef CONFIG_ECC
- bl board_relocate_rom
- sync
- mr r3, r10 /* Destination Address */
- lis r4, CFG_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CFG_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CFG_CACHELINE_SIZE /* Cache Line Size */
-#else
cmplw cr1,r3,r4
addi r0,r5,3
srwi. r0,r0,2
@@ -675,7 +688,6 @@ relocate_code:
3: lwzu r0,-4(r8)
stwu r0,-4(r7)
bdnz 3b
-#endif
/*
* Now flush the cache: note that we must start from a cache aligned
* address. Otherwise we might miss one cache line.
@@ -708,9 +720,6 @@ relocate_code:
blr
in_ram:
-#ifdef CONFIG_ECC
- bl board_init_ecc
-#endif
/*
* Relocation Function, r14 point to got2+0x8000
*
@@ -864,40 +873,43 @@ enable_ext_addr:
isync
blr
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
.globl setup_ccsrbar
setup_ccsrbar:
/* Special sequence needed to update CCSRBAR itself */
- lis r4, CFG_CCSRBAR_DEFAULT@h
- ori r4, r4, CFG_CCSRBAR_DEFAULT@l
+ lis r4, CONFIG_SYS_CCSRBAR_DEFAULT@h
+ ori r4, r4, CONFIG_SYS_CCSRBAR_DEFAULT@l
- lis r5, CFG_CCSRBAR@h
- ori r5, r5, CFG_CCSRBAR@l
- srwi r6,r5,12
- stw r6, 0(r4)
+ lis r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@h
+ ori r5, r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@l
+ srwi r5,r5,12
+ li r6, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
+ rlwimi r5,r6,20,8,11
+ stw r5, 0(r4) /* Store physical value of CCSR */
isync
- lis r5, 0xffff
- ori r5,r5,0xf000
+ lis r5, TEXT_BASE@h
+ ori r5,r5,TEXT_BASE@l
lwz r5, 0(r5)
isync
- lis r3, CFG_CCSRBAR@h
- lwz r5, CFG_CCSRBAR@l(r3)
+ /* Use VA of CCSR to do read */
+ lis r3, CONFIG_SYS_CCSRBAR@h
+ lwz r5, CONFIG_SYS_CCSRBAR@l(r3)
isync
blr
#endif
-#ifdef CFG_INIT_RAM_LOCK
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
lock_ram_in_cache:
/* Allocate Initial RAM in data cache.
*/
- lis r3, (CFG_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l
- li r2, ((CFG_INIT_RAM_END & ~31) + \
- (CFG_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r2
+ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+ ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+ li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+ mtctr r4
1:
dcbz r0, r3
addi r3, r3, 32
@@ -928,11 +940,11 @@ lock_ram_in_cache:
.globl unlock_ram_in_cache
unlock_ram_in_cache:
/* invalidate the INIT_RAM section */
- lis r3, (CFG_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l
- li r2, ((CFG_INIT_RAM_END & ~31) + \
- (CFG_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r2
+ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+ ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+ li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+ mtctr r4
1: icbi r0, r3
addi r3, r3, 32
bdnz 1b
@@ -970,64 +982,3 @@ unlock_ram_in_cache:
blr
#endif
#endif
-
-/* If this is a multi-cpu system then we need to handle the
- * 2nd cpu. The assumption is that the 2nd cpu is being
- * held in boot holdoff mode until the 1st cpu unlocks it
- * from Linux. We'll do some basic cpu init and then pass
- * it to the Linux Reset Vector.
- * Sri: Much of this initialization is not required. Linux
- * rewrites the bats, and the sprs and also enables the L1 cache.
- */
-#if (CONFIG_NUM_CPUS > 1)
-.globl secondary_cpu_setup
-secondary_cpu_setup:
- /* Do only core setup on all cores except cpu0 */
- bl invalidate_bats
- sync
- bl enable_ext_addr
-
-#ifdef CFG_L2
- /* init the L2 cache */
- addis r3, r0, L2_INIT@h
- ori r3, r3, L2_INIT@l
- sync
- mtspr l2cr, r3
-#ifdef CONFIG_ALTIVEC
- dssall
-#endif
- /* invalidate the L2 cache */
- bl l2cache_invalidate
- sync
-#endif
-
- /* enable and invalidate the data cache */
- bl dcache_enable
- sync
-
- /* enable and invalidate the instruction cache*/
- bl icache_enable
- sync
-
- /* TBEN in HID0 */
- mfspr r4, HID0
- oris r4, r4, 0x0400
- mtspr HID0, r4
- sync
- isync
-
- /* MCP|SYNCBE|ABE in HID1 */
- mfspr r4, HID1
- oris r4, r4, 0x8000
- ori r4, r4, 0x0C00
- mtspr HID1, r4
- sync
- isync
-
- lis r3, CONFIG_LINUX_RESET_VEC@h
- ori r3, r3, CONFIG_LINUX_RESET_VEC@l
- mtlr r3
- blr
-
- /* Never Returns, Running in Linux Now */
-#endif
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 18:15:07 +0000