diff options
Diffstat (limited to 'cpu/mpc85xx/tsec.h')
| -rw-r--r-- | cpu/mpc85xx/tsec.h | 179 |
1 files changed, 126 insertions, 53 deletions
diff --git a/cpu/mpc85xx/tsec.h b/cpu/mpc85xx/tsec.h index db4169ca4..275bbd264 100644 --- a/cpu/mpc85xx/tsec.h +++ b/cpu/mpc85xx/tsec.h @@ -7,6 +7,7 @@ * terms of the GNU Public License, Version 2, incorporated * herein by reference. * + * Copyright 2004 Freescale Semiconductor. * (C) Copyright 2003, Motorola, Inc. * maintained by Xianghua Xiao (x.xiao@motorola.com) * author Andy Fleming @@ -19,15 +20,13 @@ #include <net.h> #include <mpc85xx.h> -/* TSEC1 is offset 0x24000, TSEC2 is offset 0x25000 -#define TSEC_BASE_ADDR (CFG_IMMR + 0x25000) -*/ #define TSEC_BASE_ADDR (CFG_IMMR + 0x24000) -#define TSEC_MEM_SIZE 0x01000 +#define TSEC_SIZE 0x01000 #define MAC_ADDR_LEN 6 -#define TSEC_TIMEOUT 1000000 +/* #define TSEC_TIMEOUT 1000000 */ +#define TSEC_TIMEOUT 1000 #define TOUT_LOOP 1000000 /* MAC register bits */ @@ -47,11 +46,15 @@ #define MACCFG2_INIT_SETTINGS 0x00007205 #define MACCFG2_FULL_DUPLEX 0x00000001 #define MACCFG2_IF 0x00000300 +#define MACCFG2_GMII 0x00000200 #define MACCFG2_MII 0x00000100 #define ECNTRL_INIT_SETTINGS 0x00001000 #define ECNTRL_TBI_MODE 0x00000020 +#define miim_end -2 +#define miim_read -1 + #define TBIPA_VALUE 0x1f #define MIIMCFG_INIT_VALUE 0x00000003 #define MIIMCFG_RESET 0x80000000 @@ -60,52 +63,84 @@ #define MIIMIND_NOTVALID 0x00000004 #define MIIM_CONTROL 0x00 +#define MIIM_CONTROL_RESET 0x00009140 #define MIIM_CONTROL_INIT 0x00001140 #define MIIM_ANEN 0x00001000 -#define MIIM_CONTROL_RESET 0x00009140 + +#define MIIM_CR 0x00 +#define MIIM_CR_RST 0x00008000 +#define MIIM_CR_INIT 0x00001000 #define MIIM_STATUS 0x1 #define MIIM_STATUS_AN_DONE 0x00000020 +#define MIIM_STATUS_LINK 0x0004 -#define MIIM_GBIT_CONTROL 0x9 -#define MIIM_GBIT_CONTROL_INIT 0xe00 +#define MIIM_PHYIR1 0x2 +#define MIIM_PHYIR2 0x3 -#define MIIM_TBI_ANEX 0x6 -#define MIIM_TBI_ANEX_NP 0x00000004 -#define MIIM_TBI_ANEX_PRX 0x00000002 +#define MIIM_ANAR 0x4 +#define MIIM_ANAR_INIT 0x1e1 #define MIIM_TBI_ANLPBPA 0x5 #define MIIM_TBI_ANLPBPA_HALF 0x00000040 #define MIIM_TBI_ANLPBPA_FULL 0x00000020 -#ifdef CONFIG_PHY_CIS8201 -#define MIIM_AUX_CONSTAT 0x1c -#define MIIM_AUXCONSTAT_INIT 0x0004 -#define MIIM_AUXCONSTAT_DUPLEX 0x0020 -#define MIIM_AUXCONSTAT_SPEED 0x0018 -#define MIIM_AUXCONSTAT_GBIT 0x0010 -#define MIIM_AUXCONSTAT_100 0x0008 +#define MIIM_TBI_ANEX 0x6 +#define MIIM_TBI_ANEX_NP 0x00000004 +#define MIIM_TBI_ANEX_PRX 0x00000002 + +#define MIIM_GBIT_CONTROL 0x9 +#define MIIM_GBIT_CONTROL_INIT 0xe00 -#define MIIM_EXT_CON1 0x17 -#define MIIM_EXTCON1_INIT 0x0000 +/* Cicada Auxiliary Control/Status Register */ +#define MIIM_CIS8201_AUX_CONSTAT 0x1c +#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004 +#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020 +#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018 +#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010 +#define MIIM_CIS8201_AUXCONSTAT_100 0x0008 -#endif +/* Cicada Extended Control Register 1 */ +#define MIIM_CIS8201_EXT_CON1 0x17 +#define MIIM_CIS8201_EXTCON1_INIT 0x0000 -#ifdef CONFIG_PHY_M88E1011 -#define MIIM_ANAR 0x4 -#define MIIM_ANAR_INIT 0x1e1 +/* Cicada 8204 Extended PHY Control Register 1 */ +#define MIIM_CIS8204_EPHY_CON 0x17 +#define MIIM_CIS8204_EPHYCON_INIT 0x0006 + +/* Cicada 8204 Serial LED Control Register */ +#define MIIM_CIS8204_SLED_CON 0x1b +#define MIIM_CIS8204_SLEDCON_INIT 0x1115 #define MIIM_GBIT_CON 0x09 #define MIIM_GBIT_CON_ADVERT 0x0e00 -#define MIIM_PHY_STATUS 0x11 -#define MIIM_PHYSTAT_SPEED 0xc000 -#define MIIM_PHYSTAT_GBIT 0x8000 -#define MIIM_PHYSTAT_100 0x4000 -#define MIIM_PHYSTAT_DUPLEX 0x2000 -#define MIIM_PHYSTAT_SPDDONE 0x0800 -#define MIIM_PHYSTAT_LINK 0x0400 -#endif +/* 88E1011 PHY Status Register */ +#define MIIM_88E1011_PHY_STATUS 0x11 +#define MIIM_88E1011_PHYSTAT_SPEED 0xc000 +#define MIIM_88E1011_PHYSTAT_GBIT 0x8000 +#define MIIM_88E1011_PHYSTAT_100 0x4000 +#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000 +#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800 +#define MIIM_88E1011_PHYSTAT_LINK 0x0400 + +/* DM9161 Control register values */ +#define MIIM_DM9161_CR_STOP 0x0400 +#define MIIM_DM9161_CR_RSTAN 0x1200 + +#define MIIM_DM9161_SCR 0x10 +#define MIIM_DM9161_SCR_INIT 0x0610 + +/* DM9161 Specified Configuration and Status Register */ +#define MIIM_DM9161_SCSR 0x11 +#define MIIM_DM9161_SCSR_100F 0x8000 +#define MIIM_DM9161_SCSR_100H 0x4000 +#define MIIM_DM9161_SCSR_10F 0x2000 +#define MIIM_DM9161_SCSR_10H 0x1000 + +/* DM9161 10BT Configuration/Status */ +#define MIIM_DM9161_10BTCSR 0x12 +#define MIIM_DM9161_10BTCSR_INIT 0x7800 #define MIIM_READ_COMMAND 0x00000001 @@ -120,27 +155,6 @@ #define TSTAT_CLEAR_THALT 0x80000000 #define RSTAT_CLEAR_RHALT 0x00800000 -/* Write value to the PHY at phyid to the register at offset, */ -/* using the register space defined in regbase. Note that */ -/* miimcfg needs to have the clock speed setup correctly. This */ -/* macro will wait until the write is done before it finishes */ -#define write_phy_reg(regbase, phyid, offset, value) do { \ - int timeout=1000000; \ - regbase->miimadd = (phyid << 8) | offset; \ - regbase->miimcon = value; \ - asm("msync"); \ - while((regbase->miimind & MIIMIND_BUSY) && timeout--); \ -} while(0) - - -/* This works around errata in reseting the PHY */ -#define RESET_ERRATA(regs, ID) do { \ - write_phy_reg(regs, (ID), 0x1d, 0x1f); \ - write_phy_reg(regs, (ID), 0x1e, 0x200c); \ - write_phy_reg(regs, (ID), 0x1d, 0x5); \ - write_phy_reg(regs, (ID), 0x1e, 0x0); \ - write_phy_reg(regs, (ID), 0x1e, 0x100); \ -} while(0) #define IEVENT_INIT_CLEAR 0xffffffff #define IEVENT_BABR 0x80000000 @@ -402,4 +416,63 @@ typedef struct tsec uint resc00[256]; } tsec_t; +struct tsec_private { + volatile tsec_t *regs; + volatile tsec_t *phyregs; + struct phy_info *phyinfo; + uint phyaddr; + uint gigabit; + uint link; + uint duplexity; + uint speed; +}; + + +/* + * struct phy_cmd: A command for reading or writing a PHY register + * + * mii_reg: The register to read or write + * + * mii_data: For writes, the value to put in the register. + * A value of -1 indicates this is a read. + * + * funct: A function pointer which is invoked for each command. + * For reads, this function will be passed the value read + * from the PHY, and process it. + * For writes, the result of this function will be written + * to the PHY register + */ +struct phy_cmd { + uint mii_reg; + uint mii_data; + uint (*funct) (uint mii_reg, struct tsec_private* priv); +}; + +/* struct phy_info: a structure which defines attributes for a PHY + * + * id will contain a number which represents the PHY. During + * startup, the driver will poll the PHY to find out what its + * UID--as defined by registers 2 and 3--is. The 32-bit result + * gotten from the PHY will be shifted right by "shift" bits to + * discard any bits which may change based on revision numbers + * unimportant to functionality + * + * The struct phy_cmd entries represent pointers to an arrays of + * commands which tell the driver what to do to the PHY. + */ +struct phy_info { + uint id; + char *name; + uint shift; + /* Called to configure the PHY, and modify the controller + * based on the results */ + struct phy_cmd *config; + + /* Called when starting up the controller */ + struct phy_cmd *startup; + + /* Called when bringing down the controller */ + struct phy_cmd *shutdown; +}; + #endif /* __TSEC_H */ |