summaryrefslogtreecommitdiff
path: root/cpu/mpc8260/serial_smc.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mpc8260/serial_smc.c')
-rw-r--r--cpu/mpc8260/serial_smc.c151
1 files changed, 78 insertions, 73 deletions
diff --git a/cpu/mpc8260/serial_smc.c b/cpu/mpc8260/serial_smc.c
index a6efa6689..fbb3fb042 100644
--- a/cpu/mpc8260/serial_smc.c
+++ b/cpu/mpc8260/serial_smc.c
@@ -64,6 +64,23 @@ DECLARE_GLOBAL_DATA_PTR;
#endif
+#if !defined(CONFIG_SYS_SMC_RXBUFLEN)
+#define CONFIG_SYS_SMC_RXBUFLEN 1
+#define CONFIG_SYS_MAXIDLE 0
+#else
+#if !defined(CONFIG_SYS_MAXIDLE)
+#error "you must define CONFIG_SYS_MAXIDLE"
+#endif
+#endif
+
+typedef volatile struct serialbuffer {
+ cbd_t rxbd; /* Rx BD */
+ cbd_t txbd; /* Tx BD */
+ uint rxindex; /* index for next character to read */
+ volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */
+ volatile uchar txbuf; /* tx buffers */
+} serialbuffer_t;
+
/* map rs_table index to baud rate generator index */
static unsigned char brg_map[] = {
6, /* BRG7 for SMC1 */
@@ -79,9 +96,9 @@ int serial_init (void)
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile smc_t *sp;
volatile smc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
volatile cpm8260_t *cp = &(im->im_cpm);
uint dpaddr;
+ volatile serialbuffer_t *rtx;
/* initialize pointers to SMC */
@@ -89,8 +106,7 @@ int serial_init (void)
*(ushort *)(&im->im_dprambase[PROFF_SMC_BASE]) = PROFF_SMC;
up = (smc_uart_t *)&im->im_dprambase[PROFF_SMC];
- /* Disable transmitter/receiver.
- */
+ /* Disable transmitter/receiver. */
sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
/* NOTE: I/O port pins are set up via the iop_conf_tab[] table */
@@ -99,20 +115,23 @@ int serial_init (void)
* damm: allocating space after the two buffers for rx/tx data
*/
- dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
+ /* allocate size of struct serialbuffer with bd rx/tx,
+ * buffer rx/tx and rx index
+ */
+ dpaddr = m8260_cpm_dpalloc((sizeof(serialbuffer_t)), 16);
+
+ rtx = (serialbuffer_t *)&im->im_dprambase[dpaddr];
/* Set the physical address of the host memory buffers in
* the buffer descriptors.
*/
- rbdf = (cbd_t *)&im->im_dprambase[dpaddr];
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = 0;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = 0;
+ rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf;
+ rtx->rxbd.cbd_sc = 0;
+
+ rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf;
+ rtx->txbd.cbd_sc = 0;
- /* Set up the uart parameters in the parameter ram.
- */
+ /* Set up the uart parameters in the parameter ram. */
up->smc_rbase = dpaddr;
up->smc_tbase = dpaddr+sizeof(cbd_t);
up->smc_rfcr = CPMFCR_EB;
@@ -126,8 +145,7 @@ int serial_init (void)
*/
sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
- /* Mask all interrupts and remove anything pending.
- */
+ /* Mask all interrupts and remove anything pending. */
sp->smc_smcm = 0;
sp->smc_smce = 0xff;
@@ -136,22 +154,19 @@ int serial_init (void)
*/
im->im_cpmux.cmx_smr = (im->im_cpmux.cmx_smr&~CMXSMR_MASK)|CMXSMR_VALUE;
- /* Set up the baud rate generator.
- */
+ /* Set up the baud rate generator. */
serial_setbrg ();
- /* Make the first buffer the only buffer.
- */
- tbdf->cbd_sc |= BD_SC_WRAP;
- rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
+ /* Make the first buffer the only buffer. */
+ rtx->txbd.cbd_sc |= BD_SC_WRAP;
+ rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
- /* Single character receive.
- */
- up->smc_mrblr = 1;
- up->smc_maxidl = 0;
+ /* single/multi character receive. */
+ up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN;
+ up->smc_maxidl = CONFIG_SYS_MAXIDLE;
+ rtx->rxindex = 0;
- /* Initialize Tx/Rx parameters.
- */
+ /* Initialize Tx/Rx parameters. */
while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
;
@@ -162,8 +177,7 @@ int serial_init (void)
while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
;
- /* Enable transmitter/receiver.
- */
+ /* Enable transmitter/receiver. */
sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
return (0);
@@ -183,27 +197,23 @@ serial_setbrg (void)
void
serial_putc(const char c)
{
- volatile cbd_t *tbdf;
- volatile char *buf;
volatile smc_uart_t *up;
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile serialbuffer_t *rtx;
if (c == '\n')
serial_putc ('\r');
up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
- tbdf = (cbd_t *)&im->im_dprambase[up->smc_tbase];
+ rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
- /* Wait for last character to go.
- */
- buf = (char *)tbdf->cbd_bufaddr;
- while (tbdf->cbd_sc & BD_SC_READY)
+ /* Wait for last character to go. */
+ while (rtx->txbd.cbd_sc & BD_SC_READY & BD_SC_READY)
;
-
- *buf = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
+ rtx->txbuf = c;
+ rtx->txbd.cbd_datlen = 1;
+ rtx->txbd.cbd_sc |= BD_SC_READY;
}
void
@@ -217,39 +227,44 @@ serial_puts (const char *s)
int
serial_getc(void)
{
- volatile cbd_t *rbdf;
- volatile unsigned char *buf;
volatile smc_uart_t *up;
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- unsigned char c;
+ volatile serialbuffer_t *rtx;
+ unsigned char c;
up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
- rbdf = (cbd_t *)&im->im_dprambase[up->smc_rbase];
+ rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
- /* Wait for character to show up.
- */
- buf = (unsigned char *)rbdf->cbd_bufaddr;
- while (rbdf->cbd_sc & BD_SC_EMPTY)
+ /* Wait for character to show up. */
+ while (rtx->rxbd.cbd_sc & BD_SC_EMPTY)
;
- c = *buf;
- rbdf->cbd_sc |= BD_SC_EMPTY;
+ /* the characters are read one by one,
+ * use the rxindex to know the next char to deliver
+ */
+ c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr + rtx->rxindex);
+ rtx->rxindex++;
+
+ /* check if all char are readout, then make prepare for next receive */
+ if (rtx->rxindex >= rtx->rxbd.cbd_datlen) {
+ rtx->rxindex = 0;
+ rtx->rxbd.cbd_sc |= BD_SC_EMPTY;
+ }
return(c);
}
int
serial_tstc()
{
- volatile cbd_t *rbdf;
volatile smc_uart_t *up;
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ volatile serialbuffer_t *rtx;
up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
+ rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
- rbdf = (cbd_t *)&im->im_dprambase[up->smc_rbase];
-
- return(!(rbdf->cbd_sc & BD_SC_EMPTY));
+ return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY);
}
#endif /* CONFIG_CONS_ON_SMC */
@@ -309,8 +324,7 @@ kgdb_serial_init (void)
*(ushort *)(&im->im_dprambase[KGDB_PROFF_SMC_BASE]) = KGDB_PROFF_SMC;
up = (smc_uart_t *)&im->im_dprambase[KGDB_PROFF_SMC];
- /* Disable transmitter/receiver.
- */
+ /* Disable transmitter/receiver. */
sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
/* NOTE: I/O port pins are set up via the iop_conf_tab[] table */
@@ -331,8 +345,7 @@ kgdb_serial_init (void)
tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
tbdf->cbd_sc = 0;
- /* Set up the uart parameters in the parameter ram.
- */
+ /* Set up the uart parameters in the parameter ram. */
up->smc_rbase = dpaddr;
up->smc_tbase = dpaddr+sizeof(cbd_t);
up->smc_rfcr = CPMFCR_EB;
@@ -346,8 +359,7 @@ kgdb_serial_init (void)
*/
sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
- /* Mask all interrupts and remove anything pending.
- */
+ /* Mask all interrupts and remove anything pending. */
sp->smc_smcm = 0;
sp->smc_smce = 0xff;
@@ -357,8 +369,7 @@ kgdb_serial_init (void)
im->im_cpmux.cmx_smr =
(im->im_cpmux.cmx_smr & ~KGDB_CMXSMR_MASK) | KGDB_CMXSMR_VALUE;
- /* Set up the baud rate generator.
- */
+ /* Set up the baud rate generator. */
#if defined(CONFIG_KGDB_USE_EXTC)
m8260_cpm_extcbrg(brg_map[KGDB_SMC_INDEX], speed,
CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL);
@@ -366,18 +377,15 @@ kgdb_serial_init (void)
m8260_cpm_setbrg(brg_map[KGDB_SMC_INDEX], speed);
#endif
- /* Make the first buffer the only buffer.
- */
+ /* Make the first buffer the only buffer. */
tbdf->cbd_sc |= BD_SC_WRAP;
rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
- /* Single character receive.
- */
+ /* Single character receive. */
up->smc_mrblr = 1;
up->smc_maxidl = 0;
- /* Initialize Tx/Rx parameters.
- */
+ /* Initialize Tx/Rx parameters. */
while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
;
@@ -388,8 +396,7 @@ kgdb_serial_init (void)
while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
;
- /* Enable transmitter/receiver.
- */
+ /* Enable transmitter/receiver. */
sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
printf("SMC%d at %dbps ", CONFIG_KGDB_INDEX, speed);
@@ -410,8 +417,7 @@ putDebugChar(const char c)
tbdf = (cbd_t *)&im->im_dprambase[up->smc_tbase];
- /* Wait for last character to go.
- */
+ /* Wait for last character to go. */
buf = (char *)tbdf->cbd_bufaddr;
while (tbdf->cbd_sc & BD_SC_READY)
;
@@ -442,8 +448,7 @@ getDebugChar(void)
rbdf = (cbd_t *)&im->im_dprambase[up->smc_rbase];
- /* Wait for character to show up.
- */
+ /* Wait for character to show up. */
buf = (unsigned char *)rbdf->cbd_bufaddr;
while (rbdf->cbd_sc & BD_SC_EMPTY)
;
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 21:03:47 +0000