diff options
Diffstat (limited to 'cpu/mcf5445x/cpu_init.c')
| -rw-r--r-- | cpu/mcf5445x/cpu_init.c | 45 | 
1 files changed, 39 insertions, 6 deletions
diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c index 48b37dfe7..8d51d35d6 100644 --- a/cpu/mcf5445x/cpu_init.c +++ b/cpu/mcf5445x/cpu_init.c @@ -28,6 +28,7 @@  #include <common.h>  #include <watchdog.h>  #include <asm/immap.h> +#include <asm/processor.h>  #include <asm/rtc.h>  #if defined(CONFIG_CMD_NET) @@ -105,6 +106,14 @@ void cpu_init_f(void)  	fbcs->csmr5 = CONFIG_SYS_CS5_MASK;  #endif +	/* +	 * now the flash base address is no longer at 0 (Newer ColdFire family +	 * boot at address 0 instead of 0xFFnn_nnnn). The vector table must +	 * also move to the new location. +	 */ +	if (CONFIG_SYS_CS0_BASE != 0) +		setvbr(CONFIG_SYS_CS0_BASE); +  #ifdef CONFIG_FSL_I2C  	gpio->par_feci2c = GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA;  #endif @@ -128,19 +137,43 @@ int cpu_init_r(void)  	return (0);  } -void uart_port_conf(void) +void uart_port_conf(int port)  {  	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;  	/* Setup Ports: */ -	switch (CONFIG_SYS_UART_PORT) { +	switch (port) {  	case 0: -		gpio->par_uart = +		gpio->par_uart &= +		    ~(GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); +		gpio->par_uart |=  		    (GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);  		break;  	case 1: -		gpio->par_uart = +#ifdef CONFIG_SYS_UART1_PRI_GPIO +		gpio->par_uart &= +		    ~(GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); +		gpio->par_uart |=  		    (GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); +#elif defined(CONFIG_SYS_UART1_ALT1_GPIO) +		gpio->par_ssi &= +		    (GPIO_PAR_SSI_SRXD_UNMASK | GPIO_PAR_SSI_STXD_UNMASK); +		gpio->par_ssi |= +		    (GPIO_PAR_SSI_SRXD_U1RXD | GPIO_PAR_SSI_STXD_U1TXD); +#endif +		break; +	case 2: +#if defined(CONFIG_SYS_UART2_ALT1_GPIO) +		gpio->par_timer &= +		    (GPIO_PAR_TIMER_T3IN_UNMASK | GPIO_PAR_TIMER_T2IN_UNMASK); +		gpio->par_timer |= +		    (GPIO_PAR_TIMER_T3IN_U2RXD | GPIO_PAR_TIMER_T2IN_U2TXD); +#elif defined(CONFIG_SYS_UART2_ALT2_GPIO) +		gpio->par_timer &= +		    (GPIO_PAR_FECI2C_SCL_UNMASK | GPIO_PAR_FECI2C_SDA_UNMASK); +		gpio->par_timer |= +		    (GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD); +#endif  		break;  	}  } @@ -164,9 +197,9 @@ int fecpin_setclear(struct eth_device *dev, int setclear)  		    ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);  		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) -			gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK; +			gpio->par_fec &= GPIO_PAR_FEC_FEC0_UNMASK;  		else -			gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK; +			gpio->par_fec &= GPIO_PAR_FEC_FEC1_UNMASK;  	}  	return 0;  }  |