summaryrefslogtreecommitdiff
path: root/common
diff options
context:
space:
mode:
Diffstat (limited to 'common')
-rw-r--r--common/cmd_ide.c171
-rw-r--r--common/cmd_pcmcia.c58
-rw-r--r--common/env_flash.c16
3 files changed, 162 insertions, 83 deletions
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 5bde5006a..1778b33d6 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -139,7 +139,7 @@ static block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE];
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_IDE_LED
-#if !defined(CONFIG_KUP4K) && !defined(CONFIG_BMS2003)
+#if !defined(CONFIG_KUP4K) && !defined(CONFIG_HMI10)
static void ide_led (uchar led, uchar status);
#else
extern void ide_led (uchar led, uchar status);
@@ -180,7 +180,7 @@ static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len
#ifdef CONFIG_ATAPI
static void atapi_inquiry(block_dev_desc_t *dev_desc);
-ulong atapi_read (int device, ulong blknr, ulong blkcnt, ulong *buffer);
+ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer);
#endif
@@ -303,11 +303,15 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (strcmp(argv[1],"read") == 0) {
ulong addr = simple_strtoul(argv[2], NULL, 16);
- ulong blk = simple_strtoul(argv[3], NULL, 16);
+#if CFG_64BIT_STRTOUL
+ lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
+#else
+ lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
+#endif
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
- printf ("\nIDE read: device %d block # %ld, count %ld ... ",
+ printf ("\nIDE read: device %d block # %qd, count %ld ... ",
curr_device, blk, cnt);
n = ide_dev_desc[curr_device].block_read (curr_device,
@@ -325,11 +329,15 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
} else if (strcmp(argv[1],"write") == 0) {
ulong addr = simple_strtoul(argv[2], NULL, 16);
- ulong blk = simple_strtoul(argv[3], NULL, 16);
+#if CFG_64BIT_STRTOUL
+ lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
+#else
+ lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
+#endif
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
- printf ("\nIDE write: device %d block # %ld, count %ld ... ",
+ printf ("\nIDE write: device %d block # %qd, count %ld ... ",
curr_device, blk, cnt);
n = ide_write (curr_device, blk, cnt, (ulong *)addr);
@@ -607,8 +615,7 @@ void ide_init (void)
ide_led ((LED_IDE1 | LED_IDE2), 0); /* LED's off */
#ifdef CONFIG_AMIGAONEG3SE
/* If this is the second bus, the first one was OK */
- if (bus != 0)
- {
+ if (bus != 0) {
ide_bus_ok[bus] = 0;
goto skip_bus;
}
@@ -838,7 +845,7 @@ output_data_short(int dev, ulong *sect_buf, int words)
static void
input_swap_data(int dev, ulong *sect_buf, int words)
{
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
volatile ushort *pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
ushort *dbuf = (ushort *)sect_buf;
@@ -846,7 +853,7 @@ input_swap_data(int dev, ulong *sect_buf, int words)
*dbuf++ = ld_le16(pbuf);
*dbuf++ = ld_le16(pbuf);
}
-#else /* CONFIG_BMS2003 */
+#else /* CONFIG_HMI10 */
uchar i;
volatile uchar *pbuf_even = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_EVEN);
volatile uchar *pbuf_odd = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
@@ -859,7 +866,7 @@ input_swap_data(int dev, ulong *sect_buf, int words)
dbuf+=1;
}
}
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
}
#endif /* __LITTLE_ENDIAN || CONFIG_AU1X00 */
@@ -868,7 +875,7 @@ input_swap_data(int dev, ulong *sect_buf, int words)
static void
output_data(int dev, ulong *sect_buf, int words)
{
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
ushort *dbuf;
volatile ushort *pbuf;
@@ -880,7 +887,7 @@ output_data(int dev, ulong *sect_buf, int words)
__asm__ volatile ("eieio");
*pbuf = *dbuf++;
}
-#else /* CONFIG_BMS2003 */
+#else /* CONFIG_HMI10 */
uchar *dbuf;
volatile uchar *pbuf_even;
volatile uchar *pbuf_odd;
@@ -898,7 +905,7 @@ output_data(int dev, ulong *sect_buf, int words)
__asm__ volatile ("eieio");
*pbuf_odd = *dbuf++;
}
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
}
#else /* ! __PPC__ */
static void
@@ -912,7 +919,7 @@ output_data(int dev, ulong *sect_buf, int words)
static void
input_data(int dev, ulong *sect_buf, int words)
{
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
ushort *dbuf;
volatile ushort *pbuf;
@@ -924,7 +931,7 @@ input_data(int dev, ulong *sect_buf, int words)
__asm__ volatile ("eieio");
*dbuf++ = *pbuf;
}
-#else /* CONFIG_BMS2003 */
+#else /* CONFIG_HMI10 */
uchar *dbuf;
volatile uchar *pbuf_even;
volatile uchar *pbuf_odd;
@@ -942,7 +949,7 @@ input_data(int dev, ulong *sect_buf, int words)
__asm__ volatile ("eieio");
*dbuf++ = *pbuf_odd;
}
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
}
#else /* ! __PPC__ */
static void
@@ -968,8 +975,7 @@ input_data_short(int dev, ulong *sect_buf, int words)
__asm__ volatile ("eieio");
}
- if (words&1)
- {
+ if (words&1) {
ushort dummy;
dummy = *pbuf;
}
@@ -1023,8 +1029,7 @@ static void ide_ident (block_dev_desc_t *dev_desc)
retries = 0;
/* Warning: This will be tricky to read */
- while (retries <= 1)
- {
+ while (retries <= 1) {
#endif /* CONFIG_AMIGAONEG3SE */
/* check signature */
@@ -1042,8 +1047,7 @@ static void ide_ident (block_dev_desc_t *dev_desc)
* to become ready
*/
c = ide_wait (device, ATAPI_TIME_OUT);
- }
- else
+ } else
#endif
{
/* Start Ident Command
@@ -1133,6 +1137,19 @@ static void ide_ident (block_dev_desc_t *dev_desc)
/* swap shorts */
dev_desc->lba = (iop->lba_capacity << 16) | (iop->lba_capacity >> 16);
+
+#if CONFIG_LBA48
+ if (iop->command_set_2 & 0x0400) { /* LBA 48 support */
+ dev_desc->lba48support = 1;
+ dev_desc->lba48 = (unsigned long long)iop->lba48_capacity[0] |
+ ((unsigned long long)iop->lba48_capacity[1] << 16) |
+ ((unsigned long long)iop->lba48_capacity[2] << 32) |
+ ((unsigned long long)iop->lba48_capacity[3] << 48);
+ } else {
+ dev_desc->lba48support = 0;
+ dev_desc->lba48 = 0;
+ }
+#endif /* CONFIG_LBA48 */
/* assuming HD */
dev_desc->type=DEV_TYPE_HARDDISK;
dev_desc->blksz=ATA_BLOCKSIZE;
@@ -1158,13 +1175,20 @@ static void ide_ident (block_dev_desc_t *dev_desc)
/* ------------------------------------------------------------------------- */
-ulong ide_read (int device, ulong blknr, ulong blkcnt, ulong *buffer)
+ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
{
ulong n = 0;
unsigned char c;
unsigned char pwrsave=0; /* power save */
+#if CONFIG_LBA48
+ unsigned char lba48 = 0;
- PRINTF ("ide_read dev %d start %lX, blocks %lX buffer at %lX\n",
+ if (blknr & 0x0000fffff0000000) {
+ /* more than 28 bits used, use 48bit mode */
+ lba48 = 1;
+ }
+#endif
+ PRINTF ("ide_read dev %d start %qX, blocks %lX buffer at %lX\n",
device, blknr, blkcnt, (ulong)buffer);
ide_led (DEVICE_LED(device), 1); /* LED on */
@@ -1208,15 +1232,33 @@ ulong ide_read (int device, ulong blknr, ulong blkcnt, ulong *buffer)
printf ("IDE read: device %d not ready\n", device);
break;
}
-
+#if CONFIG_LBA48
+ if (lba48) {
+ /* write high bits */
+ ide_outb (device, ATA_SECT_CNT, 0);
+ ide_outb (device, ATA_LBA_LOW, (blknr >> 24) & 0xFF);
+ ide_outb (device, ATA_LBA_MID, (blknr >> 32) & 0xFF);
+ ide_outb (device, ATA_LBA_HIGH, (blknr >> 40) & 0xFF);
+ }
+#endif
ide_outb (device, ATA_SECT_CNT, 1);
ide_outb (device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
ide_outb (device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
ide_outb (device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
- ide_outb (device, ATA_DEV_HD, ATA_LBA |
- ATA_DEVICE(device) |
- ((blknr >> 24) & 0xF) );
- ide_outb (device, ATA_COMMAND, ATA_CMD_READ);
+
+#if CONFIG_LBA48
+ if (lba48) {
+ ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device) );
+ ide_outb (device, ATA_COMMAND, ATA_CMD_READ_EXT);
+
+ } else
+#endif
+ {
+ ide_outb (device, ATA_DEV_HD, ATA_LBA |
+ ATA_DEVICE(device) |
+ ((blknr >> 24) & 0xF) );
+ ide_outb (device, ATA_COMMAND, ATA_CMD_READ);
+ }
udelay (50);
@@ -1228,8 +1270,13 @@ ulong ide_read (int device, ulong blknr, ulong blkcnt, ulong *buffer)
}
if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) {
- printf ("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
+#if CFG_64BIT_LBA && CFG_64BIT_VSPRINTF
+ printf ("Error (no IRQ) dev %d blk %qd: status 0x%02x\n",
device, blknr, c);
+#else
+ printf ("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
+ device, (ulong)blknr, c);
+#endif
break;
}
@@ -1248,10 +1295,18 @@ IDE_READ_E:
/* ------------------------------------------------------------------------- */
-ulong ide_write (int device, ulong blknr, ulong blkcnt, ulong *buffer)
+ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
{
ulong n = 0;
unsigned char c;
+#if CONFIG_LBA48
+ unsigned char lba48 = 0;
+
+ if (blknr & 0x0000fffff0000000) {
+ /* more than 28 bits used, use 48bit mode */
+ lba48 = 1;
+ }
+#endif
ide_led (DEVICE_LED(device), 1); /* LED on */
@@ -1267,23 +1322,46 @@ ulong ide_write (int device, ulong blknr, ulong blkcnt, ulong *buffer)
printf ("IDE read: device %d not ready\n", device);
goto WR_OUT;
}
-
+#if CONFIG_LBA48
+ if (lba48) {
+ /* write high bits */
+ ide_outb (device, ATA_SECT_CNT, 0);
+ ide_outb (device, ATA_LBA_LOW, (blknr >> 24) & 0xFF);
+ ide_outb (device, ATA_LBA_MID, (blknr >> 32) & 0xFF);
+ ide_outb (device, ATA_LBA_HIGH, (blknr >> 40) & 0xFF);
+ }
+#endif
ide_outb (device, ATA_SECT_CNT, 1);
ide_outb (device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
ide_outb (device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
ide_outb (device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
- ide_outb (device, ATA_DEV_HD, ATA_LBA |
- ATA_DEVICE(device) |
- ((blknr >> 24) & 0xF) );
- ide_outb (device, ATA_COMMAND, ATA_CMD_WRITE);
+
+#if CONFIG_LBA48
+ if (lba48) {
+ ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device) );
+ ide_outb (device, ATA_COMMAND, ATA_CMD_WRITE_EXT);
+
+ } else
+#endif
+ {
+ ide_outb (device, ATA_DEV_HD, ATA_LBA |
+ ATA_DEVICE(device) |
+ ((blknr >> 24) & 0xF) );
+ ide_outb (device, ATA_COMMAND, ATA_CMD_WRITE);
+ }
udelay (50);
c = ide_wait (device, IDE_TIME_OUT); /* can't take over 500 ms */
if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) {
- printf ("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
+#if CFG_64BIT_LBA && CFG_64BIT_VSPRINTF
+ printf ("Error (no IRQ) dev %d blk %qd: status 0x%02x\n",
device, blknr, c);
+#else
+ printf ("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
+ device, (ulong)blknr, c);
+#endif
goto WR_OUT;
}
@@ -1426,7 +1504,7 @@ static void ide_reset (void)
/* ------------------------------------------------------------------------- */
-#if defined(CONFIG_IDE_LED) && !defined(CONFIG_AMIGAONEG3SE) && !defined(CONFIG_KUP4K) && !defined(CONFIG_BMS2003)
+#if defined(CONFIG_IDE_LED) && !defined(CONFIG_AMIGAONEG3SE) && !defined(CONFIG_KUP4K) && !defined(CONFIG_HMI10)
static uchar led_buffer = 0; /* Buffer for current LED status */
@@ -1467,7 +1545,7 @@ static void ide_led (uchar led, uchar status)
static void
output_data_shorts(int dev, ushort *sect_buf, int shorts)
{
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
ushort *dbuf;
volatile ushort *pbuf;
@@ -1477,7 +1555,7 @@ output_data_shorts(int dev, ushort *sect_buf, int shorts)
__asm__ volatile ("eieio");
*pbuf = *dbuf++;
}
-#else /* CONFIG_BMS2003 */
+#else /* CONFIG_HMI10 */
uchar *dbuf;
volatile uchar *pbuf_even;
volatile uchar *pbuf_odd;
@@ -1490,13 +1568,13 @@ output_data_shorts(int dev, ushort *sect_buf, int shorts)
__asm__ volatile ("eieio");
*pbuf_odd = *dbuf++;
}
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
}
static void
input_data_shorts(int dev, ushort *sect_buf, int shorts)
{
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
ushort *dbuf;
volatile ushort *pbuf;
@@ -1506,7 +1584,7 @@ input_data_shorts(int dev, ushort *sect_buf, int shorts)
__asm__ volatile ("eieio");
*dbuf++ = *pbuf;
}
-#else /* CONFIG_BMS2003 */
+#else /* CONFIG_HMI10 */
uchar *dbuf;
volatile uchar *pbuf_even;
volatile uchar *pbuf_odd;
@@ -1519,7 +1597,7 @@ input_data_shorts(int dev, ushort *sect_buf, int shorts)
__asm__ volatile ("eieio");
*dbuf++ = *pbuf_odd;
}
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
}
#else /* ! __PPC__ */
@@ -1858,6 +1936,7 @@ static void atapi_inquiry(block_dev_desc_t * dev_desc)
((unsigned long)iobuf[5]<<16) +
((unsigned long)iobuf[6]<< 8) +
((unsigned long)iobuf[7]);
+ dev_desc->lba48 = 0; /* ATAPI devices cannot use 48bit addressing (ATA/ATAPI v7) */
return;
}
@@ -1871,7 +1950,7 @@ static void atapi_inquiry(block_dev_desc_t * dev_desc)
#define ATAPI_READ_BLOCK_SIZE 2048 /* assuming CD part */
#define ATAPI_READ_MAX_BLOCK ATAPI_READ_MAX_BYTES/ATAPI_READ_BLOCK_SIZE /* max blocks */
-ulong atapi_read (int device, ulong blknr, ulong blkcnt, ulong *buffer)
+ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
{
ulong n = 0;
unsigned char ccb[12]; /* Command descriptor block */
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index 53d22271b..cb4e4c622 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -160,8 +160,8 @@ int pcmcia_on (void)
}
#else
-#ifdef CONFIG_BMS2003
-# define BMS2003_FRAM_TIMING (PCMCIA_SHT(2) | PCMCIA_SST(2) | PCMCIA_SL(4))
+#ifdef CONFIG_HMI10
+# define HMI10_FRAM_TIMING (PCMCIA_SHT(2) | PCMCIA_SST(2) | PCMCIA_SL(4))
#endif
#if defined(CONFIG_LWMON) || defined(CONFIG_NSCU)
# define CFG_PCMCIA_TIMING (PCMCIA_SHT(9) | PCMCIA_SST(3) | PCMCIA_SL(12))
@@ -200,14 +200,14 @@ int pcmcia_on (void)
switch (i) {
#ifdef CONFIG_IDE_8xx_PCCARD
case 4:
-#ifdef CONFIG_BMS2003
+#ifdef CONFIG_HMI10
{ /* map FRAM area */
win->or = ( PCMCIA_BSIZE_256K
| PCMCIA_PPS_8
| PCMCIA_PRS_ATTR
| slotbit
| PCMCIA_PV
- | BMS2003_FRAM_TIMING );
+ | HMI10_FRAM_TIMING );
break;
}
#endif
@@ -241,7 +241,7 @@ int pcmcia_on (void)
break;
}
#endif /* CONFIG_IDE_8xx_PCCARD */
-#ifdef CONFIG_BMS2003
+#ifdef CONFIG_HMI10
case 3: { /* map I/O window for 4xUART data/ctrl */
win->br += 0x40000;
win->or = ( PCMCIA_BSIZE_256K
@@ -252,7 +252,7 @@ int pcmcia_on (void)
| CFG_PCMCIA_TIMING );
break;
}
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
default: /* set to not valid */
win->or = 0;
break;
@@ -636,7 +636,7 @@ static int hardware_enable(int slot)
PCMCIA_PGCRX(slot) = reg;
udelay(500);
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
#ifndef CONFIG_NSCU
/*
* Configure Port C pins for
@@ -648,7 +648,7 @@ static int hardware_enable(int slot)
immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
#endif
-#else /* CONFIG_BMS2003 */
+#else /* CONFIG_HMI10 */
/*
* Configure Port B pins for
* 5 Volts Enable and 3 Volts enable
@@ -657,7 +657,7 @@ static int hardware_enable(int slot)
/* remove all power */
immap->im_cpm.cp_pbdat |= 0x00000300;
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
/*
* Make sure there is a card in the slot, then configure the interface.
@@ -666,11 +666,11 @@ static int hardware_enable(int slot)
debug ("[%d] %s: PIPR(%p)=0x%x\n",
__LINE__,__FUNCTION__,
&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
#else
if (pcmp->pcmc_pipr & (0x10000000 >> (slot << 4))) {
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
printf (" No Card found\n");
return (1);
}
@@ -686,25 +686,25 @@ static int hardware_enable(int slot)
(reg&PCMCIA_VS2(slot))?"n":"ff");
#ifndef CONFIG_NSCU
if ((reg & mask) == mask) {
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdat |= 0x0004;
#else
immap->im_cpm.cp_pbdat &= ~(0x0000100);
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
puts (" 5.0V card found: ");
} else {
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdat |= 0x0002;
#else
immap->im_cpm.cp_pbdat &= ~(0x0000200);
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
puts (" 3.3V card found: ");
}
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
#else
immap->im_cpm.cp_pbdir |= 0x00000300;
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
#else
if ((reg & mask) == mask) {
puts (" 5.0V card found: ");
@@ -749,14 +749,14 @@ static int hardware_disable(int slot)
immap = (immap_t *)CFG_IMMR;
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
#ifndef CONFIG_NSCU
/* remove all power */
immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
#endif
-#else /* CONFIG_BMS2003 */
+#else /* CONFIG_HMI10 */
immap->im_cpm.cp_pbdat |= 0x00000300;
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
@@ -806,7 +806,7 @@ static int voltage_set(int slot, int vcc, int vpp)
PCMCIA_PGCRX(slot) = reg;
udelay(500);
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
/*
* Configure Port C pins for
* 5 Volts Enable and 3 Volts enable,
@@ -824,7 +824,7 @@ static int voltage_set(int slot, int vcc, int vpp)
case 50: reg |= 0x0004; break;
default: goto done;
}
-#else /* CONFIG_BMS2003 */
+#else /* CONFIG_HMI10 */
/*
* Configure Port B pins for
* 5 Volts Enable and 3 Volts enable,
@@ -843,7 +843,7 @@ static int voltage_set(int slot, int vcc, int vpp)
case 50: reg |= 0x00000100; break;
default: goto done;
}
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
/* Checking supported voltages */
@@ -851,21 +851,21 @@ static int voltage_set(int slot, int vcc, int vpp)
pcmp->pcmc_pipr,
(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdat |= reg;
immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
#else
immap->im_cpm.cp_pbdat &= !reg;
immap->im_cpm.cp_pbdir |= 0x00000300;
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
if (reg) {
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
debug ("PCMCIA powered at %sV\n",
(reg&0x0004) ? "5.0" : "3.3");
#else
debug ("PCMCIA powered at %sV\n",
(reg&0x00000200) ? "5.0" : "3.3");
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
} else {
debug ("PCMCIA powered down\n");
}
@@ -1850,11 +1850,11 @@ static int hardware_enable (int slot)
debug ("[%d] %s: PIPR(%p)=0x%x\n",
__LINE__,__FUNCTION__,
&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-#ifndef CONFIG_BMS2003
+#ifndef CONFIG_HMI10
if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
#else
if (pcmp->pcmc_pipr & (0x10000000 >> (slot << 4))) {
-#endif /* CONFIG_BMS2003 */
+#endif /* CONFIG_HMI10 */
printf (" No Card found\n");
return (1);
}
diff --git a/common/env_flash.c b/common/env_flash.c
index af99880e4..079f84d27 100644
--- a/common/env_flash.c
+++ b/common/env_flash.c
@@ -207,21 +207,21 @@ int saveenv(void)
debug (" %08lX ... %08lX ...",
(ulong)&(flash_addr_new->data),
sizeof(env_ptr->data)+(ulong)&(flash_addr_new->data));
- if (flash_write(env_ptr->data,
+ if ((rc = flash_write(env_ptr->data,
(ulong)&(flash_addr_new->data),
- sizeof(env_ptr->data)) ||
+ sizeof(env_ptr->data))) ||
- flash_write((char *)&(env_ptr->crc),
+ (rc = flash_write((char *)&(env_ptr->crc),
(ulong)&(flash_addr_new->crc),
- sizeof(env_ptr->crc)) ||
+ sizeof(env_ptr->crc))) ||
- flash_write((char *)&obsolete_flag,
+ (rc = flash_write((char *)&obsolete_flag,
(ulong)&(flash_addr->flags),
- sizeof(flash_addr->flags)) ||
+ sizeof(flash_addr->flags))) ||
- flash_write((char *)&active_flag,
+ (rc = flash_write((char *)&active_flag,
(ulong)&(flash_addr_new->flags),
- sizeof(flash_addr_new->flags)))
+ sizeof(flash_addr_new->flags))))
{
flash_perror (rc);
goto Done;
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 01:53:07 +0000