diff options
Diffstat (limited to 'common/usb.c')
| -rw-r--r-- | common/usb.c | 540 |
1 files changed, 305 insertions, 235 deletions
diff --git a/common/usb.c b/common/usb.c index 4d64ccb43..be81aaf0b 100644 --- a/common/usb.c +++ b/common/usb.c @@ -58,9 +58,9 @@ #undef USB_DEBUG #ifdef USB_DEBUG -#define USB_PRINTF(fmt,args...) printf (fmt ,##args) +#define USB_PRINTF(fmt, args...) printf (fmt , ##args) #else -#define USB_PRINTF(fmt,args...) +#define USB_PRINTF(fmt, args...) #endif #define USB_BUFSIZ 512 @@ -88,7 +88,7 @@ void usb_hub_reset(void); void __inline__ wait_ms(unsigned long ms) { - while(ms-->0) + while (ms-- > 0) udelay(1000); } /*************************************************************************** @@ -99,22 +99,22 @@ int usb_init(void) { int result; - running=0; - dev_index=0; - asynch_allowed=1; + running = 0; + dev_index = 0; + asynch_allowed = 1; usb_hub_reset(); /* init low_level USB */ printf("USB: "); result = usb_lowlevel_init(); - /* if lowlevel init is OK, scan the bus for devices i.e. search HUBs and configure them */ - if(result==0) { + /* if lowlevel init is OK, scan the bus for devices + * i.e. search HUBs and configure them */ + if (result == 0) { printf("scanning bus for devices... "); - running=1; + running = 1; usb_scan_devices(); usb_started = 1; return 0; - } - else { + } else { printf("Error, couldn't init Lowlevel part\n"); usb_started = 0; return -1; @@ -143,7 +143,7 @@ int usb_stop(void) */ void usb_disable_asynch(int disable) { - asynch_allowed=!disable; + asynch_allowed = !disable; } @@ -156,9 +156,9 @@ void usb_disable_asynch(int disable) * submits an Interrupt Message */ int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe, - void *buffer,int transfer_len, int interval) + void *buffer, int transfer_len, int interval) { - return submit_int_msg(dev,pipe,buffer,transfer_len,interval); + return submit_int_msg(dev, pipe, buffer, transfer_len, interval); } /* @@ -175,8 +175,10 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, unsigned short value, unsigned short index, void *data, unsigned short size, int timeout) { - if((timeout==0)&&(!asynch_allowed)) /* request for a asynch control pipe is not allowed */ + if ((timeout == 0) && (!asynch_allowed)) { + /* request for a asynch control pipe is not allowed */ return -1; + } /* set setup command */ setup_packet.requesttype = requesttype; @@ -184,24 +186,24 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, setup_packet.value = cpu_to_le16(value); setup_packet.index = cpu_to_le16(index); setup_packet.length = cpu_to_le16(size); - USB_PRINTF("usb_control_msg: request: 0x%X, requesttype: 0x%X, value 0x%X index 0x%X length 0x%X\n", - request,requesttype,value,index,size); - dev->status=USB_ST_NOT_PROC; /*not yet processed */ + USB_PRINTF("usb_control_msg: request: 0x%X, requesttype: 0x%X, " \ + "value 0x%X index 0x%X length 0x%X\n", + request, requesttype, value, index, size); + dev->status = USB_ST_NOT_PROC; /*not yet processed */ - submit_control_msg(dev,pipe,data,size,&setup_packet); - if(timeout==0) { + submit_control_msg(dev, pipe, data, size, &setup_packet); + if (timeout == 0) return (int)size; - } - while(timeout--) { - if(!((volatile unsigned long)dev->status & USB_ST_NOT_PROC)) + + while (timeout--) { + if (!((volatile unsigned long)dev->status & USB_ST_NOT_PROC)) break; wait_ms(1); } - if(dev->status==0) + if (dev->status == 0) return dev->act_len; - else { + else return -1; - } } /*------------------------------------------------------------------- @@ -214,15 +216,15 @@ int usb_bulk_msg(struct usb_device *dev, unsigned int pipe, { if (len < 0) return -1; - dev->status=USB_ST_NOT_PROC; /*not yet processed */ - submit_bulk_msg(dev,pipe,data,len); - while(timeout--) { - if(!((volatile unsigned long)dev->status & USB_ST_NOT_PROC)) + dev->status = USB_ST_NOT_PROC; /*not yet processed */ + submit_bulk_msg(dev, pipe, data, len); + while (timeout--) { + if (!((volatile unsigned long)dev->status & USB_ST_NOT_PROC)) break; wait_ms(1); } - *actual_length=dev->act_len; - if(dev->status==0) + *actual_length = dev->act_len; + if (dev->status == 0) return 0; else return -1; @@ -237,9 +239,10 @@ int usb_bulk_msg(struct usb_device *dev, unsigned int pipe, * returns the max packet size, depending on the pipe direction and * the configurations values */ -int usb_maxpacket(struct usb_device *dev,unsigned long pipe) +int usb_maxpacket(struct usb_device *dev, unsigned long pipe) { - if((pipe & USB_DIR_IN)==0) /* direction is out -> use emaxpacket out */ + /* direction is out -> use emaxpacket out */ + if ((pipe & USB_DIR_IN) == 0) return(dev->epmaxpacketout[((pipe>>15) & 0xf)]); else return(dev->epmaxpacketin[((pipe>>15) & 0xf)]); @@ -318,8 +321,9 @@ int usb_parse_config(struct usb_device *dev, unsigned char *buffer, int cfgno) dev->configno = cfgno; head = (struct usb_descriptor_header *) &buffer[0]; - if(head->bDescriptorType != USB_DT_CONFIG) { - printf(" ERROR: NOT USB_CONFIG_DESC %x\n", head->bDescriptorType); + if (head->bDescriptorType != USB_DT_CONFIG) { + printf(" ERROR: NOT USB_CONFIG_DESC %x\n", + head->bDescriptorType); return -1; } memcpy(&dev->config, buffer, buffer[0]); @@ -327,45 +331,52 @@ int usb_parse_config(struct usb_device *dev, unsigned char *buffer, int cfgno) dev->config.no_of_if = 0; index = dev->config.bLength; - /* Ok the first entry must be a configuration entry, now process the others */ + /* Ok the first entry must be a configuration entry, + * now process the others */ head = (struct usb_descriptor_header *) &buffer[index]; - while(index + 1 < dev->config.wTotalLength) { - switch(head->bDescriptorType) { - case USB_DT_INTERFACE: - if(((struct usb_interface_descriptor *) &buffer[index])-> - bInterfaceNumber != curr_if_num) { - /* this is a new interface, copy new desc */ - ifno = dev->config.no_of_if; - dev->config.no_of_if++; - memcpy(&dev->config.if_desc[ifno], - &buffer[index], buffer[index]); - dev->config.if_desc[ifno].no_of_ep = 0; - dev->config.if_desc[ifno].num_altsetting = 1; - curr_if_num = dev->config.if_desc[ifno].bInterfaceNumber; - } else { - /* found alternate setting for the interface */ - dev->config.if_desc[ifno].num_altsetting++; - } - break; - case USB_DT_ENDPOINT: - epno = dev->config.if_desc[ifno].no_of_ep; - dev->config.if_desc[ifno].no_of_ep++; /* found an endpoint */ - memcpy(&dev->config.if_desc[ifno].ep_desc[epno], + while (index + 1 < dev->config.wTotalLength) { + switch (head->bDescriptorType) { + case USB_DT_INTERFACE: + if (((struct usb_interface_descriptor *) \ + &buffer[index])->bInterfaceNumber != curr_if_num) { + /* this is a new interface, copy new desc */ + ifno = dev->config.no_of_if; + dev->config.no_of_if++; + memcpy(&dev->config.if_desc[ifno], &buffer[index], buffer[index]); - le16_to_cpus(&(dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize)); - USB_PRINTF("if %d, ep %d\n", ifno, epno); - break; - default: - if(head->bLength == 0) - return 1; - USB_PRINTF("unknown Description Type : %x\n", head->bDescriptorType); - { - ch = (unsigned char *)head; - for(i = 0; i < head->bLength; i++) - USB_PRINTF("%02X ", *ch++); - USB_PRINTF("\n\n\n"); - } - break; + dev->config.if_desc[ifno].no_of_ep = 0; + dev->config.if_desc[ifno].num_altsetting = 1; + curr_if_num = + dev->config.if_desc[ifno].bInterfaceNumber; + } else { + /* found alternate setting for the interface */ + dev->config.if_desc[ifno].num_altsetting++; + } + break; + case USB_DT_ENDPOINT: + epno = dev->config.if_desc[ifno].no_of_ep; + /* found an endpoint */ + dev->config.if_desc[ifno].no_of_ep++; + memcpy(&dev->config.if_desc[ifno].ep_desc[epno], + &buffer[index], buffer[index]); + le16_to_cpus(&(dev->config.if_desc[ifno].ep_desc[epno].\ + wMaxPacketSize)); + USB_PRINTF("if %d, ep %d\n", ifno, epno); + break; + default: + if (head->bLength == 0) + return 1; + + USB_PRINTF("unknown Description Type : %x\n", + head->bDescriptorType); + + { + ch = (unsigned char *)head; + for (i = 0; i < head->bLength; i++) + USB_PRINTF("%02X ", *ch++); + USB_PRINTF("\n\n\n"); + } + break; } index += head->bLength; head = (struct usb_descriptor_header *)&buffer[index]; @@ -384,7 +395,8 @@ int usb_clear_halt(struct usb_device *dev, int pipe) int endp = usb_pipeendpoint(pipe)|(usb_pipein(pipe)<<7); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, 0, endp, NULL, 0, USB_CNTL_TIMEOUT * 3); + USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, 0, + endp, NULL, 0, USB_CNTL_TIMEOUT * 3); /* don't clear if failed */ if (result < 0) @@ -406,7 +418,8 @@ int usb_clear_halt(struct usb_device *dev, int pipe) /********************************************************************** * get_descriptor type */ -int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char index, void *buf, int size) +int usb_get_descriptor(struct usb_device *dev, unsigned char type, + unsigned char index, void *buf, int size) { int res; res = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), @@ -419,32 +432,36 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char /********************************************************************** * gets configuration cfgno and store it in the buffer */ -int usb_get_configuration_no(struct usb_device *dev,unsigned char *buffer,int cfgno) +int usb_get_configuration_no(struct usb_device *dev, + unsigned char *buffer, int cfgno) { int result; unsigned int tmp; struct usb_config_descriptor *config; - config=(struct usb_config_descriptor *)&buffer[0]; + config = (struct usb_config_descriptor *)&buffer[0]; result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, 8); if (result < 8) { if (result < 0) - printf("unable to get descriptor, error %lX\n",dev->status); + printf("unable to get descriptor, error %lX\n", + dev->status); else - printf("config descriptor too short (expected %i, got %i)\n",8,result); + printf("config descriptor too short " \ + "(expected %i, got %i)\n", 8, result); return -1; } tmp = le16_to_cpu(config->wTotalLength); if (tmp > USB_BUFSIZ) { - USB_PRINTF("usb_get_configuration_no: failed to get descriptor - too long: %d\n", - tmp); + USB_PRINTF("usb_get_configuration_no: failed to get " \ + "descriptor - too long: %d\n", tmp); return -1; } result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, tmp); - USB_PRINTF("get_conf_no %d Result %d, wLength %d\n",cfgno,result,tmp); + USB_PRINTF("get_conf_no %d Result %d, wLength %d\n", + cfgno, result, tmp); return result; } @@ -456,11 +473,11 @@ int usb_set_address(struct usb_device *dev) { int res; - USB_PRINTF("set address %d\n",dev->devnum); - res=usb_control_msg(dev, usb_snddefctrl(dev), - USB_REQ_SET_ADDRESS, 0, - (dev->devnum),0, - NULL,0, USB_CNTL_TIMEOUT); + USB_PRINTF("set address %d\n", dev->devnum); + res = usb_control_msg(dev, usb_snddefctrl(dev), + USB_REQ_SET_ADDRESS, 0, + (dev->devnum), 0, + NULL, 0, USB_CNTL_TIMEOUT); return res; } @@ -484,16 +501,19 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) } /* * We should return now for devices with only one alternate setting. - * According to 9.4.10 of the Universal Serial Bus Specification Revision 2.0 - * such devices can return with a STALL. This results in some USB sticks - * timeouting during initialization and then being unusable in U-Boot. + * According to 9.4.10 of the Universal Serial Bus Specification + * Revision 2.0 such devices can return with a STALL. This results in + * some USB sticks timeouting during initialization and then being + * unusable in U-Boot. */ if (if_face->num_altsetting == 1) return 0; - if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE, alternate, - interface, NULL, 0, USB_CNTL_TIMEOUT * 5)) < 0) + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE, + alternate, interface, NULL, 0, + USB_CNTL_TIMEOUT * 5); + if (ret < 0) return ret; return 0; @@ -505,18 +525,17 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) int usb_set_configuration(struct usb_device *dev, int configuration) { int res; - USB_PRINTF("set configuration %d\n",configuration); + USB_PRINTF("set configuration %d\n", configuration); /* set setup command */ - res=usb_control_msg(dev, usb_sndctrlpipe(dev,0), - USB_REQ_SET_CONFIGURATION, 0, - configuration,0, - NULL,0, USB_CNTL_TIMEOUT); - if(res==0) { + res = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + USB_REQ_SET_CONFIGURATION, 0, + configuration, 0, + NULL, 0, USB_CNTL_TIMEOUT); + if (res == 0) { dev->toggle[0] = 0; dev->toggle[1] = 0; return 0; - } - else + } else return -1; } @@ -543,11 +562,13 @@ int usb_set_idle(struct usb_device *dev, int ifnum, int duration, int report_id) /******************************************************************** * get report */ -int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type, unsigned char id, void *buf, int size) +int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type, + unsigned char id, void *buf, int size) { return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), - USB_REQ_GET_REPORT, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - (type << 8) + id, ifnum, buf, size, USB_CNTL_TIMEOUT); + USB_REQ_GET_REPORT, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + (type << 8) + id, ifnum, buf, size, USB_CNTL_TIMEOUT); } /******************************************************************** @@ -564,7 +585,8 @@ int usb_get_class_descriptor(struct usb_device *dev, int ifnum, /******************************************************************** * get string index in buffer */ -int usb_get_string(struct usb_device *dev, unsigned short langid, unsigned char index, void *buf, int size) +int usb_get_string(struct usb_device *dev, unsigned short langid, + unsigned char index, void *buf, int size) { int i; int result; @@ -655,17 +677,19 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size) if (!dev->have_langid) { err = usb_string_sub(dev, 0, 0, tbuf); if (err < 0) { - USB_PRINTF("error getting string descriptor 0 (error=%x)\n",dev->status); + USB_PRINTF("error getting string descriptor 0 " \ + "(error=%x)\n", dev->status); return -1; } else if (tbuf[0] < 4) { USB_PRINTF("string descriptor 0 too short\n"); return -1; } else { dev->have_langid = -1; - dev->string_langid = tbuf[2] | (tbuf[3]<< 8); + dev->string_langid = tbuf[2] | (tbuf[3] << 8); /* always use the first langid listed */ - USB_PRINTF("USB device number %d default language ID 0x%x\n", - dev->devnum, dev->string_langid); + USB_PRINTF("USB device number %d default " \ + "language ID 0x%x\n", + dev->devnum, dev->string_langid); } } @@ -697,9 +721,9 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size) /* returns a pointer to the device with the index [index]. * if the device is not assigned (dev->devnum==-1) returns NULL */ -struct usb_device * usb_get_dev_index(int index) +struct usb_device *usb_get_dev_index(int index) { - if(usb_dev[index].devnum==-1) + if (usb_dev[index].devnum == -1) return NULL; else return &usb_dev[index]; @@ -709,21 +733,22 @@ struct usb_device * usb_get_dev_index(int index) /* returns a pointer of a new device structure or NULL, if * no device struct is available */ -struct usb_device * usb_alloc_new_device(void) +struct usb_device *usb_alloc_new_device(void) { int i; - USB_PRINTF("New Device %d\n",dev_index); - if(dev_index==USB_MAX_DEVICE) { - printf("ERROR, too many USB Devices, max=%d\n",USB_MAX_DEVICE); + USB_PRINTF("New Device %d\n", dev_index); + if (dev_index == USB_MAX_DEVICE) { + printf("ERROR, too many USB Devices, max=%d\n", USB_MAX_DEVICE); return NULL; } - usb_dev[dev_index].devnum=dev_index+1; /* default Address is 0, real addresses start with 1 */ - usb_dev[dev_index].maxchild=0; - for(i=0;i<USB_MAXCHILDREN;i++) - usb_dev[dev_index].children[i]=NULL; - usb_dev[dev_index].parent=NULL; + /* default Address is 0, real addresses start with 1 */ + usb_dev[dev_index].devnum = dev_index + 1; + usb_dev[dev_index].maxchild = 0; + for (i = 0; i < USB_MAXCHILDREN; i++) + usb_dev[dev_index].children[i] = NULL; + usb_dev[dev_index].parent = NULL; dev_index++; - return &usb_dev[dev_index-1]; + return &usb_dev[dev_index - 1]; } @@ -788,7 +813,7 @@ int usb_new_device(struct usb_device *dev) } } if (port < 0) { - printf("usb_new_device: cannot locate device's port..\n"); + printf("usb_new_device:cannot locate device's port.\n"); return 1; } @@ -803,7 +828,8 @@ int usb_new_device(struct usb_device *dev) /* and this is the old and known way of initializing devices */ err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, 8); if (err < 8) { - printf("\n USB device not responding, giving up (status=%lX)\n",dev->status); + printf("\n USB device not responding, " \ + "giving up (status=%lX)\n", dev->status); return 1; } #endif @@ -811,17 +837,18 @@ int usb_new_device(struct usb_device *dev) dev->epmaxpacketin [0] = dev->descriptor.bMaxPacketSize0; dev->epmaxpacketout[0] = dev->descriptor.bMaxPacketSize0; switch (dev->descriptor.bMaxPacketSize0) { - case 8: dev->maxpacketsize = 0; break; - case 16: dev->maxpacketsize = 1; break; - case 32: dev->maxpacketsize = 2; break; - case 64: dev->maxpacketsize = 3; break; + case 8: dev->maxpacketsize = 0; break; + case 16: dev->maxpacketsize = 1; break; + case 32: dev->maxpacketsize = 2; break; + case 64: dev->maxpacketsize = 3; break; } dev->devnum = addr; err = usb_set_address(dev); /* set address */ if (err < 0) { - printf("\n USB device not accepting new address (error=%lX)\n", dev->status); + printf("\n USB device not accepting new address " \ + "(error=%lX)\n", dev->status); return 1; } @@ -829,12 +856,15 @@ int usb_new_device(struct usb_device *dev) tmp = sizeof(dev->descriptor); - err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, sizeof(dev->descriptor)); + err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, + &dev->descriptor, sizeof(dev->descriptor)); if (err < tmp) { if (err < 0) - printf("unable to get device descriptor (error=%d)\n",err); + printf("unable to get device descriptor (error=%d)\n", + err); else - printf("USB device descriptor short read (expected %i, got %i)\n",tmp,err); + printf("USB device descriptor short read " \ + "(expected %i, got %i)\n", tmp, err); return 1; } /* correct le values */ @@ -843,30 +873,35 @@ int usb_new_device(struct usb_device *dev) le16_to_cpus(&dev->descriptor.idProduct); le16_to_cpus(&dev->descriptor.bcdDevice); /* only support for one config for now */ - usb_get_configuration_no(dev,&tmpbuf[0],0); - usb_parse_config(dev,&tmpbuf[0],0); + usb_get_configuration_no(dev, &tmpbuf[0], 0); + usb_parse_config(dev, &tmpbuf[0], 0); usb_set_maxpacket(dev); /* we set the default configuration here */ if (usb_set_configuration(dev, dev->config.bConfigurationValue)) { - printf("failed to set default configuration len %d, status %lX\n",dev->act_len,dev->status); + printf("failed to set default configuration " \ + "len %d, status %lX\n", dev->act_len, dev->status); return -1; } USB_PRINTF("new device strings: Mfr=%d, Product=%d, SerialNumber=%d\n", - dev->descriptor.iManufacturer, dev->descriptor.iProduct, dev->descriptor.iSerialNumber); + dev->descriptor.iManufacturer, dev->descriptor.iProduct, + dev->descriptor.iSerialNumber); memset(dev->mf, 0, sizeof(dev->mf)); memset(dev->prod, 0, sizeof(dev->prod)); memset(dev->serial, 0, sizeof(dev->serial)); if (dev->descriptor.iManufacturer) - usb_string(dev, dev->descriptor.iManufacturer, dev->mf, sizeof(dev->mf)); + usb_string(dev, dev->descriptor.iManufacturer, + dev->mf, sizeof(dev->mf)); if (dev->descriptor.iProduct) - usb_string(dev, dev->descriptor.iProduct, dev->prod, sizeof(dev->prod)); + usb_string(dev, dev->descriptor.iProduct, + dev->prod, sizeof(dev->prod)); if (dev->descriptor.iSerialNumber) - usb_string(dev, dev->descriptor.iSerialNumber, dev->serial, sizeof(dev->serial)); + usb_string(dev, dev->descriptor.iSerialNumber, + dev->serial, sizeof(dev->serial)); USB_PRINTF("Manufacturer %s\n", dev->mf); USB_PRINTF("Product %s\n", dev->prod); USB_PRINTF("SerialNumber %s\n", dev->serial); /* now prode if the device is a hub */ - usb_hub_probe(dev,0); + usb_hub_probe(dev, 0); return 0; } @@ -877,15 +912,15 @@ void usb_scan_devices(void) struct usb_device *dev; /* first make all devices unknown */ - for(i=0;i<USB_MAX_DEVICE;i++) { - memset(&usb_dev[i],0,sizeof(struct usb_device)); + for (i = 0; i < USB_MAX_DEVICE; i++) { + memset(&usb_dev[i], 0, sizeof(struct usb_device)); usb_dev[i].devnum = -1; } - dev_index=0; + dev_index = 0; /* device 0 is always present (root hub, so let it analyze) */ - dev=usb_alloc_new_device(); + dev = usb_alloc_new_device(); usb_new_device(dev); - printf("%d USB Device(s) found\n",dev_index); + printf("%d USB Device(s) found\n", dev_index); /* insert "driver" if possible */ #ifdef CONFIG_USB_KEYBOARD drv_usb_kbd_init(); @@ -902,9 +937,9 @@ void usb_scan_devices(void) #undef USB_HUB_DEBUG #ifdef USB_HUB_DEBUG -#define USB_HUB_PRINTF(fmt,args...) printf (fmt ,##args) +#define USB_HUB_PRINTF(fmt, args...) printf (fmt , ##args) #else -#define USB_HUB_PRINTF(fmt,args...) +#define USB_HUB_PRINTF(fmt, args...) #endif @@ -922,19 +957,22 @@ int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size) int usb_clear_hub_feature(struct usb_device *dev, int feature) { return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature, 0, NULL, 0, USB_CNTL_TIMEOUT); + USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature, + 0, NULL, 0, USB_CNTL_TIMEOUT); } int usb_clear_port_feature(struct usb_device *dev, int port, int feature) { return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port, NULL, 0, USB_CNTL_TIMEOUT); + USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, + port, NULL, 0, USB_CNTL_TIMEOUT); } int usb_set_port_feature(struct usb_device *dev, int port, int feature) { return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port, NULL, 0, USB_CNTL_TIMEOUT); + USB_REQ_SET_FEATURE, USB_RT_PORT, feature, + port, NULL, 0, USB_CNTL_TIMEOUT); } int usb_get_hub_status(struct usb_device *dev, void *data) @@ -957,27 +995,27 @@ static void usb_hub_power_on(struct usb_hub_device *hub) int i; struct usb_device *dev; - dev=hub->pusb_dev; + dev = hub->pusb_dev; /* Enable power to the ports */ USB_HUB_PRINTF("enabling power on all ports\n"); for (i = 0; i < dev->maxchild; i++) { usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER); - USB_HUB_PRINTF("port %d returns %lX\n",i+1,dev->status); + USB_HUB_PRINTF("port %d returns %lX\n", i + 1, dev->status); wait_ms(hub->desc.bPwrOn2PwrGood * 2); } } void usb_hub_reset(void) { - usb_hub_index=0; + usb_hub_index = 0; } struct usb_hub_device *usb_hub_allocate(void) { - if(usb_hub_index<USB_MAX_HUB) { + if (usb_hub_index < USB_MAX_HUB) return &hub_dev[usb_hub_index++]; - } - printf("ERROR: USB_MAX_HUB (%d) reached\n",USB_MAX_HUB); + + printf("ERROR: USB_MAX_HUB (%d) reached\n", USB_MAX_HUB); return NULL; } @@ -990,39 +1028,42 @@ static int hub_port_reset(struct usb_device *dev, int port, struct usb_port_status portsts; unsigned short portstatus, portchange; - USB_HUB_PRINTF("hub_port_reset: resetting port %d...\n", port); - for(tries=0;tries<MAX_TRIES;tries++) { + for (tries = 0; tries < MAX_TRIES; tries++) { usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET); wait_ms(200); - if (usb_get_port_status(dev, port + 1, &portsts)<0) { - USB_HUB_PRINTF("get_port_status failed status %lX\n",dev->status); + if (usb_get_port_status(dev, port + 1, &portsts) < 0) { + USB_HUB_PRINTF("get_port_status failed status %lX\n", + dev->status); return -1; } portstatus = le16_to_cpu(portsts.wPortStatus); portchange = le16_to_cpu(portsts.wPortChange); - USB_HUB_PRINTF("portstatus %x, change %x, %s\n", portstatus ,portchange, - portstatus&(1<<USB_PORT_FEAT_LOWSPEED) ? "Low Speed" : "High Speed"); - USB_HUB_PRINTF("STAT_C_CONNECTION = %d STAT_CONNECTION = %d USB_PORT_STAT_ENABLE %d\n", + USB_HUB_PRINTF("portstatus %x, change %x, %s\n", + portstatus, portchange, + portstatus&(1<<USB_PORT_FEAT_LOWSPEED) ? \ + "Low Speed" : "High Speed"); + USB_HUB_PRINTF("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \ + " USB_PORT_STAT_ENABLE %d\n", (portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0, (portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0, (portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0); + if ((portchange & USB_PORT_STAT_C_CONNECTION) || !(portstatus & USB_PORT_STAT_CONNECTION)) return -1; - if (portstatus & USB_PORT_STAT_ENABLE) { - + if (portstatus & USB_PORT_STAT_ENABLE) break; - } wait_ms(200); } - if (tries==MAX_TRIES) { - USB_HUB_PRINTF("Cannot enable port %i after %i retries, disabling port.\n", port+1, MAX_TRIES); + if (tries == MAX_TRIES) { + USB_HUB_PRINTF("Cannot enable port %i after %i retries, " \ + "disabling port.\n", port + 1, MAX_TRIES); USB_HUB_PRINTF("Maybe the USB cable is bad?\n"); return -1; } @@ -1030,7 +1071,6 @@ static int hub_port_reset(struct usb_device *dev, int port, usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_RESET); *portstat = portstatus; return 0; - } @@ -1041,22 +1081,24 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port) unsigned short portstatus, portchange; /* Check status */ - if (usb_get_port_status(dev, port + 1, &portsts)<0) { + if (usb_get_port_status(dev, port + 1, &portsts) < 0) { USB_HUB_PRINTF("get_port_status failed\n"); return; } portstatus = le16_to_cpu(portsts.wPortStatus); portchange = le16_to_cpu(portsts.wPortChange); - USB_HUB_PRINTF("portstatus %x, change %x, %s\n", portstatus, portchange, - portstatus&(1<<USB_PORT_FEAT_LOWSPEED) ? "Low Speed" : "High Speed"); + USB_HUB_PRINTF("portstatus %x, change %x, %s\n", + portstatus, portchange, + portstatus&(1 << USB_PORT_FEAT_LOWSPEED) ? \ + "Low Speed" : "High Speed"); /* Clear the connection change status */ usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_CONNECTION); /* Disconnect any existing devices under this port */ if (((!(portstatus & USB_PORT_STAT_CONNECTION)) && - (!(portstatus & USB_PORT_STAT_ENABLE)))|| (dev->children[port])) { + (!(portstatus & USB_PORT_STAT_ENABLE))) || (dev->children[port])) { USB_HUB_PRINTF("usb_disconnect(&hub->children[port]);\n"); /* Return now if nothing is connected */ if (!(portstatus & USB_PORT_STAT_CONNECTION)) @@ -1073,11 +1115,11 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port) wait_ms(200); /* Allocate a new device struct for it */ - usb=usb_alloc_new_device(); + usb = usb_alloc_new_device(); usb->slow = (portstatus & USB_PORT_STAT_LOW_SPEED) ? 1 : 0; dev->children[port] = usb; - usb->parent=dev; + usb->parent = dev; /* Run it through the hoops (find a driver, etc) */ if (usb_new_device(usb)) { /* Woops, disable the port */ @@ -1096,13 +1138,14 @@ int usb_hub_configure(struct usb_device *dev) struct usb_hub_device *hub; /* "allocate" Hub device */ - hub=usb_hub_allocate(); - if(hub==NULL) + hub = usb_hub_allocate(); + if (hub == NULL) return -1; - hub->pusb_dev=dev; + hub->pusb_dev = dev; /* Get the the hub descriptor */ if (usb_get_hub_descriptor(dev, buffer, 4) < 0) { - USB_HUB_PRINTF("usb_hub_configure: failed to get hub descriptor, giving up %lX\n",dev->status); + USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \ + "descriptor, giving up %lX\n", dev->status); return -1; } descriptor = (struct usb_hub_descriptor *)buffer; @@ -1110,43 +1153,48 @@ int usb_hub_configure(struct usb_device *dev) /* silence compiler warning if USB_BUFSIZ is > 256 [= sizeof(char)] */ i = descriptor->bLength; if (i > USB_BUFSIZ) { - USB_HUB_PRINTF("usb_hub_configure: failed to get hub descriptor - too long: %d\n", - descriptor->bLength); + USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \ + "descriptor - too long: %d\n", + descriptor->bLength); return -1; } if (usb_get_hub_descriptor(dev, buffer, descriptor->bLength) < 0) { - USB_HUB_PRINTF("usb_hub_configure: failed to get hub descriptor 2nd giving up %lX\n",dev->status); + USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \ + "descriptor 2nd giving up %lX\n", dev->status); return -1; } - memcpy((unsigned char *)&hub->desc,buffer,descriptor->bLength); + memcpy((unsigned char *)&hub->desc, buffer, descriptor->bLength); /* adjust 16bit values */ - hub->desc.wHubCharacteristics = le16_to_cpu(descriptor->wHubCharacteristics); + hub->desc.wHubCharacteristics = + le16_to_cpu(descriptor->wHubCharacteristics); /* set the bitmap */ - bitmap=(unsigned char *)&hub->desc.DeviceRemovable[0]; - memset(bitmap,0xff,(USB_MAXCHILDREN+1+7)/8); /* devices not removable by default */ - bitmap=(unsigned char *)&hub->desc.PortPowerCtrlMask[0]; - memset(bitmap,0xff,(USB_MAXCHILDREN+1+7)/8); /* PowerMask = 1B */ - for(i=0;i<((hub->desc.bNbrPorts + 1 + 7)/8);i++) { - hub->desc.DeviceRemovable[i]=descriptor->DeviceRemovable[i]; - } - for(i=0;i<((hub->desc.bNbrPorts + 1 + 7)/8);i++) { - hub->desc.DeviceRemovable[i]=descriptor->PortPowerCtrlMask[i]; - } + bitmap = (unsigned char *)&hub->desc.DeviceRemovable[0]; + /* devices not removable by default */ + memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8); + bitmap = (unsigned char *)&hub->desc.PortPowerCtrlMask[0]; + memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8); /* PowerMask = 1B */ + + for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++) + hub->desc.DeviceRemovable[i] = descriptor->DeviceRemovable[i]; + + for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++) + hub->desc.DeviceRemovable[i] = descriptor->PortPowerCtrlMask[i]; + dev->maxchild = descriptor->bNbrPorts; USB_HUB_PRINTF("%d ports detected\n", dev->maxchild); switch (hub->desc.wHubCharacteristics & HUB_CHAR_LPSM) { - case 0x00: - USB_HUB_PRINTF("ganged power switching\n"); - break; - case 0x01: - USB_HUB_PRINTF("individual port power switching\n"); - break; - case 0x02: - case 0x03: - USB_HUB_PRINTF("unknown reserved power switching mode\n"); - break; + case 0x00: + USB_HUB_PRINTF("ganged power switching\n"); + break; + case 0x01: + USB_HUB_PRINTF("individual port power switching\n"); + break; + case 0x02: + case 0x03: + USB_HUB_PRINTF("unknown reserved power switching mode\n"); + break; } if (hub->desc.wHubCharacteristics & HUB_CHAR_COMPOUND) @@ -1155,40 +1203,52 @@ int usb_hub_configure(struct usb_device *dev) USB_HUB_PRINTF("standalone hub\n"); switch (hub->desc.wHubCharacteristics & HUB_CHAR_OCPM) { - case 0x00: - USB_HUB_PRINTF("global over-current protection\n"); - break; - case 0x08: - USB_HUB_PRINTF("individual port over-current protection\n"); - break; - case 0x10: - case 0x18: - USB_HUB_PRINTF("no over-current protection\n"); - break; + case 0x00: + USB_HUB_PRINTF("global over-current protection\n"); + break; + case 0x08: + USB_HUB_PRINTF("individual port over-current protection\n"); + break; + case 0x10: + case 0x18: + USB_HUB_PRINTF("no over-current protection\n"); + break; } - USB_HUB_PRINTF("power on to power good time: %dms\n", descriptor->bPwrOn2PwrGood * 2); - USB_HUB_PRINTF("hub controller current requirement: %dmA\n", descriptor->bHubContrCurrent); + + USB_HUB_PRINTF("power on to power good time: %dms\n", + descriptor->bPwrOn2PwrGood * 2); + USB_HUB_PRINTF("hub controller current requirement: %dmA\n", + descriptor->bHubContrCurrent); + for (i = 0; i < dev->maxchild; i++) USB_HUB_PRINTF("port %d is%s removable\n", i + 1, - hub->desc.DeviceRemovable[(i + 1)/8] & (1 << ((i + 1)%8)) ? " not" : ""); + hub->desc.DeviceRemovable[(i + 1) / 8] & \ + (1 << ((i + 1) % 8)) ? " not" : ""); + if (sizeof(struct usb_hub_status) > USB_BUFSIZ) { - USB_HUB_PRINTF("usb_hub_configure: failed to get Status - too long: %d\n", - descriptor->bLength); + USB_HUB_PRINTF("usb_hub_configure: failed to get Status - " \ + "too long: %d\n", descriptor->bLength); return -1; } if (usb_get_hub_status(dev, buffer) < 0) { - USB_HUB_PRINTF("usb_hub_configure: failed to get Status %lX\n",dev->status); + USB_HUB_PRINTF("usb_hub_configure: failed to get Status %lX\n", + dev->status); return -1; } + hubsts = (struct usb_hub_status *)buffer; USB_HUB_PRINTF("get_hub_status returned status %X, change %X\n", - le16_to_cpu(hubsts->wHubStatus),le16_to_cpu(hubsts->wHubChange)); + le16_to_cpu(hubsts->wHubStatus), + le16_to_cpu(hubsts->wHubChange)); USB_HUB_PRINTF("local power source is %s\n", - (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? "lost (inactive)" : "good"); + (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? \ + "lost (inactive)" : "good"); USB_HUB_PRINTF("%sover-current condition exists\n", - (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? "" : "no "); + (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? \ + "" : "no "); usb_hub_power_on(hub); + for (i = 0; i < dev->maxchild; i++) { struct usb_port_status portsts; unsigned short portstatus, portchange; @@ -1197,41 +1257,51 @@ int usb_hub_configure(struct usb_device *dev) USB_HUB_PRINTF("get_port_status failed\n"); continue; } + portstatus = le16_to_cpu(portsts.wPortStatus); portchange = le16_to_cpu(portsts.wPortChange); - USB_HUB_PRINTF("Port %d Status %X Change %X\n",i+1,portstatus,portchange); + USB_HUB_PRINTF("Port %d Status %X Change %X\n", + i + 1, portstatus, portchange); + if (portchange & USB_PORT_STAT_C_CONNECTION) { USB_HUB_PRINTF("port %d connection change\n", i + 1); usb_hub_port_connect_change(dev, i); } if (portchange & USB_PORT_STAT_C_ENABLE) { - USB_HUB_PRINTF("port %d enable change, status %x\n", i + 1, portstatus); - usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_ENABLE); + USB_HUB_PRINTF("port %d enable change, status %x\n", + i + 1, portstatus); + usb_clear_port_feature(dev, i + 1, + USB_PORT_FEAT_C_ENABLE); - /* EM interference sometimes causes bad shielded USB devices to - * be shutdown by the hub, this hack enables them again. - * Works at least with mouse driver */ + /* EM interference sometimes causes bad shielded USB + * devices to be shutdown by the hub, this hack enables + * them again. Works at least with mouse driver */ if (!(portstatus & USB_PORT_STAT_ENABLE) && - (portstatus & USB_PORT_STAT_CONNECTION) && (dev->children[i])) { - USB_HUB_PRINTF("already running port %i disabled by hub (EMI?), re-enabling...\n", - i + 1); + (portstatus & USB_PORT_STAT_CONNECTION) && + ((dev->children[i]))) { + USB_HUB_PRINTF("already running port %i " \ + "disabled by hub (EMI?), " \ + "re-enabling...\n", i + 1); usb_hub_port_connect_change(dev, i); } } if (portstatus & USB_PORT_STAT_SUSPEND) { USB_HUB_PRINTF("port %d suspend change\n", i + 1); - usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_SUSPEND); + usb_clear_port_feature(dev, i + 1, + USB_PORT_FEAT_SUSPEND); } if (portchange & USB_PORT_STAT_C_OVERCURRENT) { USB_HUB_PRINTF("port %d over-current change\n", i + 1); - usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_OVER_CURRENT); + usb_clear_port_feature(dev, i + 1, + USB_PORT_FEAT_C_OVER_CURRENT); usb_hub_power_on(hub); } if (portchange & USB_PORT_STAT_C_RESET) { USB_HUB_PRINTF("port %d reset change\n", i + 1); - usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_RESET); + usb_clear_port_feature(dev, i + 1, + USB_PORT_FEAT_C_RESET); } } /* end for i all ports */ @@ -1265,7 +1335,7 @@ int usb_hub_probe(struct usb_device *dev, int ifnum) return 0; /* We found a hub */ USB_HUB_PRINTF("USB hub found\n"); - ret=usb_hub_configure(dev); + ret = usb_hub_configure(dev); return ret; } |