diff options
Diffstat (limited to 'common/serial.c')
| -rw-r--r-- | common/serial.c | 162 |
1 files changed, 91 insertions, 71 deletions
diff --git a/common/serial.c b/common/serial.c index 7a69fc1a5..995d268f6 100644 --- a/common/serial.c +++ b/common/serial.c @@ -24,81 +24,15 @@ #include <common.h> #include <serial.h> #include <stdio_dev.h> +#include <post.h> +#include <linux/compiler.h> DECLARE_GLOBAL_DATA_PTR; static struct serial_device *serial_devices = NULL; static struct serial_device *serial_current = NULL; -#if !defined(CONFIG_LWMON) && !defined(CONFIG_PXA250) && !defined(CONFIG_PXA27X) -struct serial_device *__default_serial_console (void) -{ -#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2) - return &serial_smc_device; -#elif defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) \ - || defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4) - return &serial_scc_device; -#elif defined(CONFIG_4xx) \ - || defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) \ - || defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) \ - || defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) \ - || defined(CONFIG_TEGRA2) -#if defined(CONFIG_CONS_INDEX) && defined(CONFIG_SYS_NS16550_SERIAL) -#if (CONFIG_CONS_INDEX==1) - return &eserial1_device; -#elif (CONFIG_CONS_INDEX==2) - return &eserial2_device; -#elif (CONFIG_CONS_INDEX==3) - return &eserial3_device; -#elif (CONFIG_CONS_INDEX==4) - return &eserial4_device; -#else -#error "Bad CONFIG_CONS_INDEX." -#endif -#else - return &serial0_device; -#endif -#elif defined(CONFIG_MPC512X) -#if (CONFIG_PSC_CONSOLE == 3) - return &serial3_device; -#elif (CONFIG_PSC_CONSOLE == 6) - return &serial6_device; -#else -#error "Bad CONFIG_PSC_CONSOLE." -#endif -#elif defined(CONFIG_S3C2410) -#if defined(CONFIG_SERIAL1) - return &s3c24xx_serial0_device; -#elif defined(CONFIG_SERIAL2) - return &s3c24xx_serial1_device; -#elif defined(CONFIG_SERIAL3) - return &s3c24xx_serial2_device; -#else -#error "CONFIG_SERIAL? missing." -#endif -#elif defined(CONFIG_S5P) -#if defined(CONFIG_SERIAL0) - return &s5p_serial0_device; -#elif defined(CONFIG_SERIAL1) - return &s5p_serial1_device; -#elif defined(CONFIG_SERIAL2) - return &s5p_serial2_device; -#elif defined(CONFIG_SERIAL3) - return &s5p_serial3_device; -#else -#error "CONFIG_SERIAL? missing." -#endif -#elif defined(CONFIG_OMAP3_ZOOM2) - return ZOOM2_DEFAULT_SERIAL_DEVICE; -#else -#error No default console -#endif -} - -struct serial_device *default_serial_console(void) __attribute__((weak, alias("__default_serial_console"))); -#endif - -int serial_register (struct serial_device *dev) +void serial_register(struct serial_device *dev) { #ifdef CONFIG_NEEDS_MANUAL_RELOC dev->init += gd->reloc_off; @@ -111,8 +45,6 @@ int serial_register (struct serial_device *dev) dev->next = serial_devices; serial_devices = dev; - - return 0; } void serial_initialize (void) @@ -294,3 +226,91 @@ void serial_puts (const char *s) serial_current->puts (s); } + +#if CONFIG_POST & CONFIG_SYS_POST_UART +static const int bauds[] = CONFIG_SYS_BAUDRATE_TABLE; + +/* Mark weak until post/cpu/.../uart.c migrate over */ +__weak +int uart_post_test(int flags) +{ + unsigned char c; + int ret, saved_baud, b; + struct serial_device *saved_dev, *s; + bd_t *bd = gd->bd; + + /* Save current serial state */ + ret = 0; + saved_dev = serial_current; + saved_baud = bd->bi_baudrate; + + for (s = serial_devices; s; s = s->next) { + /* If this driver doesn't support loop back, skip it */ + if (!s->loop) + continue; + + /* Test the next device */ + serial_current = s; + + ret = serial_init(); + if (ret) + goto done; + + /* Consume anything that happens to be queued */ + while (serial_tstc()) + serial_getc(); + + /* Enable loop back */ + s->loop(1); + + /* Test every available baud rate */ + for (b = 0; b < ARRAY_SIZE(bauds); ++b) { + bd->bi_baudrate = bauds[b]; + serial_setbrg(); + + /* + * Stick to printable chars to avoid issues: + * - terminal corruption + * - serial program reacting to sequences and sending + * back random extra data + * - most serial drivers add in extra chars (like \r\n) + */ + for (c = 0x20; c < 0x7f; ++c) { + /* Send it out */ + serial_putc(c); + + /* Make sure it's the same one */ + ret = (c != serial_getc()); + if (ret) { + s->loop(0); + goto done; + } + + /* Clean up the output in case it was sent */ + serial_putc('\b'); + ret = ('\b' != serial_getc()); + if (ret) { + s->loop(0); + goto done; + } + } + } + + /* Disable loop back */ + s->loop(0); + + /* XXX: There is no serial_uninit() !? */ + if (s->uninit) + s->uninit(); + } + + done: + /* Restore previous serial state */ + serial_current = saved_dev; + bd->bi_baudrate = saved_baud; + serial_reinit_all(); + serial_setbrg(); + + return ret; +} +#endif |