diff options
Diffstat (limited to 'board/siemens/pcu_e/flash.c')
| -rw-r--r-- | board/siemens/pcu_e/flash.c | 700 | 
1 files changed, 700 insertions, 0 deletions
| diff --git a/board/siemens/pcu_e/flash.c b/board/siemens/pcu_e/flash.c new file mode 100644 index 000000000..b8c0df774 --- /dev/null +++ b/board/siemens/pcu_e/flash.c @@ -0,0 +1,700 @@ +/* + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc8xx.h> + +#if defined(CFG_ENV_IS_IN_FLASH) +# ifndef  CFG_ENV_ADDR +#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET) +# endif +# ifndef  CFG_ENV_SIZE +#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE +# endif +# ifndef  CFG_ENV_SECT_SIZE +#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE +# endif +#endif + +/*---------------------------------------------------------------------*/ +#undef DEBUG_FLASH + +#ifdef DEBUG_FLASH +#define DEBUGF(fmt,args...) printf(fmt ,##args) +#else +#define DEBUGF(fmt,args...) +#endif +/*---------------------------------------------------------------------*/ + + +flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/ + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size (vu_long *addr, flash_info_t *info); +static int write_data (flash_info_t *info, ulong dest, ulong data); +static void flash_get_offsets (ulong base, flash_info_t *info); + +/*----------------------------------------------------------------------- + * + * The PCU E uses an address map where flash banks are aligned top + * down, so that the "first" flash bank ends at top of memory, and + * the monitor entry point is at address (0xFFF00100). The second + * flash bank is mapped immediately below bank 0. + * + * This is NOT in conformance to the "official" memory map! + * + */ + +#define PCU_MONITOR_BASE   ( (flash_info[0].start[0] + flash_info[0].size - 1) \ +			   - (0xFFFFFFFF - CFG_MONITOR_BASE) ) + +/*----------------------------------------------------------------------- + */ + +unsigned long flash_init (void) +{ +	volatile immap_t     *immap  = (immap_t *)CFG_IMMR; +	volatile memctl8xx_t *memctl = &immap->im_memctl; +	unsigned long base, size_b0, size_b1; +	int i; + +	/* Init: no FLASHes known */ +	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { +		flash_info[i].flash_id = FLASH_UNKNOWN; +	} + +	/* Static FLASH Bank configuration here - FIXME XXX */ + +	/* +	 * Warning: +	 * +	 * Since the PCU E memory map assigns flash banks top down, +	 * we swap the numbering later if both banks are equipped, +	 * so they look like a contiguous area of memory. +	 */ +	DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM); + +	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); + +	if (flash_info[0].flash_id == FLASH_UNKNOWN) { +		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", +			size_b0, size_b0<<20); +	} + +	DEBUGF("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE6_PRELIM); +	size_b1 = flash_get_size((vu_long *)FLASH_BASE6_PRELIM, &flash_info[1]); + +	DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n", size_b0, size_b1); + +	if (size_b1 > size_b0) { +		printf ("## ERROR: " +			"Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n", +			size_b1, size_b1<<20, +			size_b0, size_b0<<20 +		); +		flash_info[0].flash_id	= FLASH_UNKNOWN; +		flash_info[1].flash_id	= FLASH_UNKNOWN; +		flash_info[0].sector_count	= -1; +		flash_info[1].sector_count	= -1; +		flash_info[0].size		= 0; +		flash_info[1].size		= 0; +		return (0); +	} + +	DEBUGF ("## Before remap: " +		"BR0: 0x%08x    OR0: 0x%08x    " +		"BR6: 0x%08x    OR6: 0x%08x\n", +		memctl->memc_br0, memctl->memc_or0, +		memctl->memc_br6, memctl->memc_or6); + +	/* Remap FLASH according to real size */ +	base = 0 - size_b0; +	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); +	memctl->memc_br0 = (base & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V; + +	DEBUGF("## BR0: 0x%08x    OR0: 0x%08x\n", +		memctl->memc_br0, memctl->memc_or0); + +	/* Re-do sizing to get full correct info */ +	size_b0 = flash_get_size((vu_long *)base, &flash_info[0]); +	base = 0 - size_b0; + +	flash_info[0].size = size_b0; + +	flash_get_offsets (base, &flash_info[0]); + +	/* monitor protection ON by default */ +	flash_protect(FLAG_PROTECT_SET, +		      PCU_MONITOR_BASE, +		      PCU_MONITOR_BASE+CFG_MONITOR_LEN-1, +		      &flash_info[0]); + +#ifdef	CFG_ENV_IS_IN_FLASH +	/* ENV protection ON by default */ +	flash_protect(FLAG_PROTECT_SET, +		      CFG_ENV_ADDR, +		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1, +		      &flash_info[0]); +#endif + +	if (size_b1) { +		flash_info_t tmp_info; + +		memctl->memc_or6 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000); +		memctl->memc_br6 = ((base - size_b1) & BR_BA_MSK) | +				    BR_PS_16 | BR_MS_GPCM | BR_V; + +		DEBUGF("## New BR6: 0x%08x    OR6: 0x%08x\n", +			memctl->memc_br6, memctl->memc_or6); + +		/* Re-do sizing to get full correct info */ +		size_b1 = flash_get_size((vu_long *)(base - size_b1), +					  &flash_info[1]); +		base -= size_b1; + +		flash_get_offsets (base, &flash_info[1]); + +		flash_info[1].size = size_b1; + +#ifdef	CFG_ENV_IS_IN_FLASH +		/* ENV protection ON by default */ +		flash_protect(FLAG_PROTECT_SET, +			      CFG_ENV_ADDR, +			      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1, +			      &flash_info[1]); +#endif +		/* +		 * Swap bank numbers so that addresses are in ascending order +		 */ +		tmp_info = flash_info[0]; +		flash_info[0] = flash_info[1]; +		flash_info[1] = tmp_info; +	} else { +		memctl->memc_br1 = 0;		/* invalidate bank */ + +		flash_info[1].flash_id = FLASH_UNKNOWN; +		flash_info[1].sector_count = -1; +	} + + +	DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1); + +	return (size_b0 + size_b1); +} + +/*----------------------------------------------------------------------- + */ +static void flash_get_offsets (ulong base, flash_info_t *info) +{ +	int i; +	short n; + +	if (info->flash_id == FLASH_UNKNOWN) { +		return; +	} + +	if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_AMD) { +		return; +	} + +	switch (info->flash_id & FLASH_TYPEMASK) { +	case FLASH_AMDL322T: +	case FLASH_AMDL323T: +	case FLASH_AMDL324T: +		/* set sector offsets for top boot block type		*/ + +		base += info->size; +		i = info->sector_count; +		for (n=0; n<8; ++n) {		/*  8 x 8k boot sectors	*/ +			base -= 8 << 10; +			--i; +			info->start[i] = base; +		} +		while (i > 0) {			/* 64k regular sectors	*/ +			base -= 64 << 10; +			--i; +			info->start[i] = base; +		} +		return; +	case FLASH_AMDL322B: +	case FLASH_AMDL323B: +	case FLASH_AMDL324B: +		/* set sector offsets for bottom boot block type	*/ +		for (i=0; i<8; ++i) {		/*  8 x 8k boot sectors	*/ +			info->start[i] = base; +			base += 8 << 10; +		} +		while (base < info->size) {	/* 64k regular sectors	*/ +			info->start[i] = base; +			base += 64 << 10; +			++i; +		} +		return; +	case FLASH_AMDL640: +		/* set sector offsets for dual boot block type		*/ +		for (i=0; i<8; ++i) {		/*  8 x 8k boot sectors	*/ +			info->start[i] = base; +			base += 8 << 10; +		} +		n = info->sector_count - 8; +		while (i < n) {			/* 64k regular sectors	*/ +			info->start[i] = base; +			base += 64 << 10; +			++i; +		} +		while (i < info->sector_count) { /* 8 x 8k boot sectors	*/ +			info->start[i] = base; +			base += 8 << 10; +			++i; +		} +		return; +	default: +		return; +	} +	/* NOTREACHED */ +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info  (flash_info_t *info) +{ +	int i; + +	if (info->flash_id == FLASH_UNKNOWN) { +		printf ("missing or unknown FLASH type\n"); +		return; +	} + +	switch (info->flash_id & FLASH_VENDMASK) { +	case FLASH_MAN_AMD:	printf ("AMD ");		break; +	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break; +	default:		printf ("Unknown Vendor ");	break; +	} + +	switch (info->flash_id & FLASH_TYPEMASK) { +	case FLASH_AMDL322B:	printf ("AM29DL322B (32 Mbit, bottom boot sect)\n"); +				break; +	case FLASH_AMDL322T:	printf ("AM29DL322T (32 Mbit, top boot sector)\n"); +				break; +	case FLASH_AMDL323B:	printf ("AM29DL323B (32 Mbit, bottom boot sect)\n"); +				break; +	case FLASH_AMDL323T:	printf ("AM29DL323T (32 Mbit, top boot sector)\n"); +				break; +	case FLASH_AMDL324B:	printf ("AM29DL324B (32 Mbit, bottom boot sect)\n"); +				break; +	case FLASH_AMDL324T:	printf ("AM29DL324T (32 Mbit, top boot sector)\n"); +				break; +	case FLASH_AMDL640:	printf ("AM29DL640D (64 Mbit, dual boot sector)\n"); +				break; +	default:		printf ("Unknown Chip Type 0x%lX\n", +					info->flash_id); +				break; +	} + +	printf ("  Size: %ld MB in %d Sectors\n", +		info->size >> 20, info->sector_count); + +	printf ("  Sector Start Addresses:"); +	for (i=0; i<info->sector_count; ++i) { +		if ((i % 5) == 0) +			printf ("\n   "); +		printf (" %08lX%s", +			info->start[i], +			info->protect[i] ? " (RO)" : "     " +		); +	} +	printf ("\n"); +	return; +} + +/*----------------------------------------------------------------------- + */ + + +/*----------------------------------------------------------------------- + */ + +/* + * The following code cannot be run from FLASH! + */ + +static ulong flash_get_size (vu_long *addr, flash_info_t *info) +{ +	short i; +	ushort value; +	vu_short *saddr = (vu_short *)addr; + +	/* Write auto select command: read Manufacturer ID */ +	saddr[0x0555] = 0x00AA; +	saddr[0x02AA] = 0x0055; +	saddr[0x0555] = 0x0090; + +	value = saddr[0]; + +	DEBUGF("Manuf. ID @ 0x%08lx: 0x%04x\n", (ulong)addr, value); + +	switch (value) { +	case (AMD_MANUFACT & 0xFFFF): +		info->flash_id = FLASH_MAN_AMD; +		break; +	case (FUJ_MANUFACT & 0xFFFF): +		info->flash_id = FLASH_MAN_FUJ; +		break; +	default: +		DEBUGF("Unknown Manufacturer ID\n"); +		info->flash_id = FLASH_UNKNOWN; +		info->sector_count = 0; +		info->size = 0; +		return (0);			/* no or unknown flash	*/ +	} + +	value = saddr[1];			/* device ID		*/ + +	DEBUGF("Device ID @ 0x%08lx: 0x%04x\n", (ulong)(&addr[1]), value); + +	switch (value) { + +	case (AMD_ID_DL322T & 0xFFFF): +		info->flash_id += FLASH_AMDL322T; +		info->sector_count = 71; +		info->size = 0x00400000; +		break;				/* => 8 MB		*/ + +	case (AMD_ID_DL322B & 0xFFFF): +		info->flash_id += FLASH_AMDL322B; +		info->sector_count = 71; +		info->size = 0x00400000; +		break;				/* => 8 MB		*/ + +	case (AMD_ID_DL323T & 0xFFFF): +		info->flash_id += FLASH_AMDL323T; +		info->sector_count = 71; +		info->size = 0x00400000; +		break;				/* => 8 MB		*/ + +	case (AMD_ID_DL323B & 0xFFFF): +		info->flash_id += FLASH_AMDL323B; +		info->sector_count = 71; +		info->size = 0x00400000; +		break;				/* => 8 MB		*/ + +	case (AMD_ID_DL324T & 0xFFFF): +		info->flash_id += FLASH_AMDL324T; +		info->sector_count = 71; +		info->size = 0x00400000; +		break;				/* => 8 MB		*/ + +	case (AMD_ID_DL324B & 0xFFFF): +		info->flash_id += FLASH_AMDL324B; +		info->sector_count = 71; +		info->size = 0x00400000; +		break;				/* => 8 MB		*/ +	case (AMD_ID_DL640  & 0xFFFF): +		info->flash_id += FLASH_AMDL640; +		info->sector_count = 142; +		info->size = 0x00800000; +		break; +	default: +		DEBUGF("Unknown Device ID\n"); +		info->flash_id = FLASH_UNKNOWN; +		return (0);			/* => no or unknown flash */ + +	} + +	flash_get_offsets ((ulong)addr, info); + +	/* check for protected sectors */ +	for (i = 0; i < info->sector_count; i++) { +#if 0 +		/* read sector protection at sector address, (A7 .. A0) = 0x02 */ +		/* D0 = 1 if protected */ +		saddr = (vu_short *)(info->start[i]); +		info->protect[i] = saddr[2] & 1; +#else +		info->protect[i] =0; +#endif +	} + +	if (info->sector_count > CFG_MAX_FLASH_SECT) { +		printf ("** ERROR: sector count %d > max (%d) **\n", +			info->sector_count, CFG_MAX_FLASH_SECT); +		info->sector_count = CFG_MAX_FLASH_SECT; +	} + +	saddr = (vu_short *)info->start[0]; +	*saddr = 0x00F0;	/* restore read mode */ + +	return (info->size); +} + + +/*----------------------------------------------------------------------- + */ + +int	flash_erase (flash_info_t *info, int s_first, int s_last) +{ +	vu_short *addr = (vu_short*)(info->start[0]); +	int flag, prot, sect, l_sect; +	ulong start, now, last; + +	if ((s_first < 0) || (s_first > s_last)) { +		if (info->flash_id == FLASH_UNKNOWN) { +			printf ("- missing\n"); +		} else { +			printf ("- no sectors to erase\n"); +		} +		return 1; +	} + +	if ((info->flash_id == FLASH_UNKNOWN) || +	    (info->flash_id > FLASH_AMD_COMP)) { +		printf ("Can't erase unknown flash type %08lx - aborted\n", +			info->flash_id); +		return 1; +	} + +	prot = 0; +	for (sect=s_first; sect<=s_last; ++sect) { +		if (info->protect[sect]) { +			prot++; +		} +	} + +	if (prot) { +		printf ("- Warning: %d protected sectors will not be erased!\n", +			prot); +	} else { +		printf ("\n"); +	} + +	l_sect = -1; + +	/* Disable interrupts which might cause a timeout here */ +	flag = disable_interrupts(); + +	addr[0x0555] = 0x00AA; +	addr[0x02AA] = 0x0055; +	addr[0x0555] = 0x0080; +	addr[0x0555] = 0x00AA; +	addr[0x02AA] = 0x0055; + +	/* Start erase on unprotected sectors */ +	for (sect = s_first; sect<=s_last; sect++) { +		if (info->protect[sect] == 0) {	/* not protected */ +			addr = (vu_short*)(info->start[sect]); +			addr[0] = 0x0030; +			l_sect = sect; +		} +	} + +	/* re-enable interrupts if necessary */ +	if (flag) +		enable_interrupts(); + +	/* wait at least 80us - let's wait 1 ms */ +	udelay (1000); + +	/* +	 * We wait for the last triggered sector +	 */ +	if (l_sect < 0) +		goto DONE; + +	start = get_timer (0); +	last  = start; +	addr = (vu_short*)(info->start[l_sect]); +	while ((addr[0] & 0x0080) != 0x0080) { +		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { +			printf ("Timeout\n"); +			return 1; +		} +		/* show that we're waiting */ +		if ((now - last) > 1000) {	/* every second */ +			putc ('.'); +			last = now; +		} +	} + +DONE: +	/* reset to read mode */ +	addr = (vu_short *)info->start[0]; +	addr[0] = 0x00F0;	/* reset bank */ + +	printf (" done\n"); +	return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ + +#define FLASH_WIDTH	2	/* flash bus width in bytes */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ +	ulong cp, wp, data; +	int i, l, rc; + +	wp = (addr & ~(FLASH_WIDTH-1));	/* get lower FLASH_WIDTH aligned address */ + +	/* +	 * handle unaligned start bytes +	 */ +	if ((l = addr - wp) != 0) { +		data = 0; +		for (i=0, cp=wp; i<l; ++i, ++cp) { +			data = (data << 8) | (*(uchar *)cp); +		} +		for (; i<FLASH_WIDTH && cnt>0; ++i) { +			data = (data << 8) | *src++; +			--cnt; +			++cp; +		} +		for (; cnt==0 && i<FLASH_WIDTH; ++i, ++cp) { +			data = (data << 8) | (*(uchar *)cp); +		} + +		if ((rc = write_data(info, wp, data)) != 0) { +			return (rc); +		} +		wp += FLASH_WIDTH; +	} + +	/* +	 * handle FLASH_WIDTH aligned part +	 */ +	while (cnt >= FLASH_WIDTH) { +		data = 0; +		for (i=0; i<FLASH_WIDTH; ++i) { +			data = (data << 8) | *src++; +		} +		if ((rc = write_data(info, wp, data)) != 0) { +			return (rc); +		} +		wp  += FLASH_WIDTH; +		cnt -= FLASH_WIDTH; +	} + +	if (cnt == 0) { +		return (0); +	} + +	/* +	 * handle unaligned tail bytes +	 */ +	data = 0; +	for (i=0, cp=wp; i<FLASH_WIDTH && cnt>0; ++i, ++cp) { +		data = (data << 8) | *src++; +		--cnt; +	} +	for (; i<FLASH_WIDTH; ++i, ++cp) { +		data = (data << 8) | (*(uchar *)cp); +	} + +	return (write_data(info, wp, data)); +} + +/*----------------------------------------------------------------------- + * Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_data (flash_info_t *info, ulong dest, ulong data) +{ +	vu_short *addr  = (vu_short*)(info->start[0]); +	vu_short *sdest = (vu_short *)dest; +	ushort sdata = (ushort)data; +	ushort sval; +	ulong start, passed; +	int flag, rc; + +	/* Check if Flash is (sufficiently) erased */ +	if ((*sdest & sdata) != sdata) { +		return (2); +	} +	/* Disable interrupts which might cause a timeout here */ +	flag = disable_interrupts(); + +	addr[0x0555] = 0x00AA; +	addr[0x02AA] = 0x0055; +	addr[0x0555] = 0x00A0; + +#ifdef WORKAROUND_FOR_BROKEN_HARDWARE +	/* work around the timeout bugs */ +	udelay(20); +#endif + +	*sdest = sdata; + +	/* re-enable interrupts if necessary */ +	if (flag) +		enable_interrupts(); + +	rc = 0; +	/* data polling for D7 */ +	start = get_timer (0); + +	for (passed=0; passed < CFG_FLASH_WRITE_TOUT; passed=get_timer(start)) { + +		sval = *sdest; + +		if ((sval & 0x0080) == (sdata & 0x0080)) +			break; + +		if ((sval & 0x0020) == 0)	/* DQ5: Timeout? */ +			continue; + +		sval = *sdest; + +		if ((sval & 0x0080) != (sdata & 0x0080)) +			rc = 1; + +		break; +	} + +	if (rc) { +	    DEBUGF ("Program cycle failed @ addr 0x%08lX: val %04X data %04X\n", +		 dest, sval, sdata); +	} + +	if (passed >= CFG_FLASH_WRITE_TOUT) { +		DEBUGF ("Timeout @ addr 0x%08lX: val %04X data %04X\n", +			dest, sval, sdata); +		rc = 1; +	} + +	/* reset to read mode */ +	addr = (vu_short *)info->start[0]; +	addr[0] = 0x00F0;	/* reset bank */ + +	return (rc); +} + +/*----------------------------------------------------------------------- + */ |