summaryrefslogtreecommitdiff
path: root/board/sc520_cdp/sc520_cdp.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/sc520_cdp/sc520_cdp.c')
-rw-r--r--board/sc520_cdp/sc520_cdp.c286
1 files changed, 141 insertions, 145 deletions
diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c
index 50a49e601..0fc836c62 100644
--- a/board/sc520_cdp/sc520_cdp.c
+++ b/board/sc520_cdp/sc520_cdp.c
@@ -1,5 +1,5 @@
/*
- *
+ *
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
*
@@ -40,11 +40,11 @@
/* ------------------------------------------------------------------------- */
-
-/*
+
+/*
* Theory:
* We first set up all IRQs to be non-pci, edge triggered,
- * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets
+ * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets
* called we reallocate irqs to the pci bus with sc520_pci_set_irq()
* as needed. Whe choose the irqs to gram from a configurable list
* inside pci_sc520_fixup_irq() (If this list contains stupid irq's
@@ -54,48 +54,48 @@
static void irq_init(void)
{
/* disable global interrupt mode */
- write_mmcr_byte(SC520_PICICR, 0x40);
-
+ write_mmcr_byte(SC520_PICICR, 0x40);
+
/* set all irqs to edge */
write_mmcr_byte(SC520_MPICMODE, 0x00);
write_mmcr_byte(SC520_SL1PICMODE, 0x00);
write_mmcr_byte(SC520_SL2PICMODE, 0x00);
-
- /* active low polarity on PIC interrupt pins,
+
+ /* active low polarity on PIC interrupt pins,
* active high polarity on all other irq pins */
write_mmcr_word(SC520_INTPINPOL, 0x0000);
/* set irq number mapping */
- write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED); /* disable GP timer 0 INT */
+ write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED); /* disable GP timer 0 INT */
write_mmcr_byte(SC520_GPTMR1MAP, SC520_IRQ_DISABLED); /* disable GP timer 1 INT */
write_mmcr_byte(SC520_GPTMR2MAP, SC520_IRQ_DISABLED); /* disable GP timer 2 INT */
- write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT timer 0 INT to IRQ0 */
+ write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT timer 0 INT to IRQ0 */
write_mmcr_byte(SC520_PIT1MAP, SC520_IRQ_DISABLED); /* disable PIT timer 1 INT */
write_mmcr_byte(SC520_PIT2MAP, SC520_IRQ_DISABLED); /* disable PIT timer 2 INT */
write_mmcr_byte(SC520_PCIINTAMAP, SC520_IRQ_DISABLED); /* disable PCI INT A */
write_mmcr_byte(SC520_PCIINTBMAP, SC520_IRQ_DISABLED); /* disable PCI INT B */
write_mmcr_byte(SC520_PCIINTCMAP, SC520_IRQ_DISABLED); /* disable PCI INT C */
write_mmcr_byte(SC520_PCIINTDMAP, SC520_IRQ_DISABLED); /* disable PCI INT D */
- write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */
+ write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */
write_mmcr_byte(SC520_SSIMAP, SC520_IRQ_DISABLED); /* disable Synchronius serial INT */
write_mmcr_byte(SC520_WDTMAP, SC520_IRQ_DISABLED); /* disable Watchdog INT */
write_mmcr_byte(SC520_RTCMAP, SC520_IRQ8); /* Set RTC int to 8 */
write_mmcr_byte(SC520_WPVMAP, SC520_IRQ_DISABLED); /* disable write protect INT */
write_mmcr_byte(SC520_ICEMAP, SC520_IRQ1); /* Set ICE Debug Serielport INT to IRQ1 */
write_mmcr_byte(SC520_FERRMAP,SC520_IRQ13); /* Set FP error INT to IRQ13 */
-
+
if (CFG_USE_SIO_UART) {
write_mmcr_byte(SC520_UART1MAP, SC520_IRQ_DISABLED); /* disable internal UART1 INT */
write_mmcr_byte(SC520_UART2MAP, SC520_IRQ_DISABLED); /* disable internal UART2 INT */
- write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ3); /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */
+ write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ3); /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */
write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ4); /* Set GPIRQ4 (ISA IRQ4) to IRQ4 */
} else {
write_mmcr_byte(SC520_UART1MAP, SC520_IRQ4); /* Set internal UART2 INT to IRQ4 */
write_mmcr_byte(SC520_UART2MAP, SC520_IRQ3); /* Set internal UART2 INT to IRQ3 */
- write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ3 (ISA IRQ3) */
+ write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ3 (ISA IRQ3) */
write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ4 (ISA IRQ4) */
}
-
+
write_mmcr_byte(SC520_GP1IMAP, SC520_IRQ1); /* Set GPIRQ1 (SIO IRQ1) to IRQ1 */
write_mmcr_byte(SC520_GP5IMAP, SC520_IRQ5); /* Set GPIRQ5 (ISA IRQ5) to IRQ5 */
write_mmcr_byte(SC520_GP6IMAP, SC520_IRQ6); /* Set GPIRQ6 (ISA IRQ6) to IRQ6 */
@@ -104,14 +104,14 @@ static void irq_init(void)
write_mmcr_byte(SC520_GP9IMAP, SC520_IRQ9); /* Set GPIRQ9 (ISA IRQ2) to IRQ9 */
write_mmcr_byte(SC520_GP0IMAP, SC520_IRQ11); /* Set GPIRQ0 (ISA IRQ11) to IRQ10 */
write_mmcr_byte(SC520_GP2IMAP, SC520_IRQ12); /* Set GPIRQ2 (ISA IRQ12) to IRQ12 */
- write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ14); /* Set GPIRQ10 (ISA IRQ14) to IRQ14 */
-
+ write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ14); /* Set GPIRQ10 (ISA IRQ14) to IRQ14 */
+
write_mmcr_word(SC520_PCIHOSTMAP, 0x11f); /* Map PCI hostbridge INT to NMI */
write_mmcr_word(SC520_ECCMAP, 0x100); /* Map SDRAM ECC failure INT to NMI */
-
+
}
-
+
/* PCI stuff */
static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
{
@@ -125,64 +125,63 @@ static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
CFG_FORTH_PCI_IRQ
};
static int next_irq_index=0;
-
- char tmp_pin;
+
+ char tmp_pin;
int pin;
-
+
pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin);
pin = tmp_pin;
-
+
pin-=1; /* pci config space use 1-based numbering */
if (-1 == pin) {
return; /* device use no irq */
}
-
-
-
+
+
/* map device number + pin to a pin on the sc520 */
switch (PCI_DEV(dev)) {
case 20:
pin+=SC520_PCI_INTA;
break;
-
+
case 19:
pin+=SC520_PCI_INTB;
break;
-
+
case 18:
pin+=SC520_PCI_INTC;
break;
-
+
case 17:
pin+=SC520_PCI_INTD;
break;
-
- default:
+
+ default:
return;
}
-
+
pin&=3; /* wrap around */
-
+
if (sc520_pci_ints[pin] == -1) {
- /* re-route one interrupt for us */
+ /* re-route one interrupt for us */
if (next_irq_index > 3) {
return;
}
- if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) {
+ if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) {
return;
}
next_irq_index++;
}
-
+
if (-1 != sc520_pci_ints[pin]) {
- pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
sc520_pci_ints[pin]);
}
- PRINTF("fixup_irq: device %d pin %c irq %d\n",
+ PRINTF("fixup_irq: device %d pin %c irq %d\n",
PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]);
}
-
+
static struct pci_controller sc520_cdp_hose = {
fixup_irq: pci_sc520_cdp_fixup_irq,
};
@@ -201,7 +200,7 @@ static void silence_uart(int port)
void setup_ali_sio(int uart_primary)
{
ali512x_init();
-
+
ali512x_set_fdc(ALI_ENABLED, 0x3f2, 6, 0);
ali512x_set_pp(ALI_ENABLED, 0x278, 7, 3);
ali512x_set_uart(ALI_ENABLED, ALI_UART1, uart_primary?0x3f8:0x3e8, 4);
@@ -209,21 +208,21 @@ void setup_ali_sio(int uart_primary)
ali512x_set_rtc(ALI_DISABLED, 0, 0);
ali512x_set_kbc(ALI_ENABLED, 1, 12);
ali512x_set_cio(ALI_ENABLED);
-
+
/* IrDa pins */
ali512x_cio_function(12, 1, 0, 0);
ali512x_cio_function(13, 1, 0, 0);
-
+
/* SSI chip select pins */
ali512x_cio_function(14, 0, 0, 0); /* SSI_CS */
- ali512x_cio_function(15, 0, 0, 0); /* SSI_MV */
+ ali512x_cio_function(15, 0, 0, 0); /* SSI_MV */
ali512x_cio_function(16, 0, 0, 0); /* SSI_SPI# */
/* Board REV pins */
ali512x_cio_function(20, 0, 0, 1);
ali512x_cio_function(21, 0, 0, 1);
ali512x_cio_function(22, 0, 0, 1);
- ali512x_cio_function(23, 0, 0, 1);
+ ali512x_cio_function(23, 0, 0, 1);
}
@@ -232,54 +231,53 @@ static void bus_init(void)
{
/* set up the GP IO pins */
- write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); /* set the GPIO pin function 31-16 reg */
+ write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); /* set the GPIO pin function 31-16 reg */
write_mmcr_word(SC520_PIOPFS15_0, 0xffff); /* set the GPIO pin function 15-0 reg */
- write_mmcr_byte(SC520_CSPFS, 0xf8); /* set the CS pin function reg */
+ write_mmcr_byte(SC520_CSPFS, 0xf8); /* set the CS pin function reg */
write_mmcr_byte(SC520_CLKSEL, 0x70);
-
- write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */
+
+ write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */
write_mmcr_byte(SC520_GPCSPW, 3); /* set the GP CS pulse width */
write_mmcr_byte(SC520_GPCSOFF, 1); /* set the GP CS offset */
write_mmcr_byte(SC520_GPRDW, 3); /* set the RD pulse width */
write_mmcr_byte(SC520_GPRDOFF, 1); /* set the GP RD offset */
- write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */
+ write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */
write_mmcr_byte(SC520_GPWROFF, 1); /* set the GP WR offset */
- write_mmcr_word(SC520_BOOTCSCTL, 0x1823); /* set up timing of BOOTCS */
+ write_mmcr_word(SC520_BOOTCSCTL, 0x1823); /* set up timing of BOOTCS */
write_mmcr_word(SC520_ROMCS1CTL, 0x1823); /* set up timing of ROMCS1 */
- write_mmcr_word(SC520_ROMCS2CTL, 0x1823); /* set up timing of ROMCS2 */
-
+ write_mmcr_word(SC520_ROMCS2CTL, 0x1823); /* set up timing of ROMCS2 */
+
/* adjust the memory map:
* by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM
* and 256MB to 1G-128k (0x1000000 - 0x37ffffff) is mapped to PCI mmio
- * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */
-
-
-
+ * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */
+
+
/* SRAM = GPCS3 128k @ d0000-effff*/
- write_mmcr_long(SC520_PAR2, 0x4e00400d);
-
+ write_mmcr_long(SC520_PAR2, 0x4e00400d);
+
/* IDE0 = GPCS6 1f0-1f7 */
- write_mmcr_long(SC520_PAR3, 0x380801f0);
+ write_mmcr_long(SC520_PAR3, 0x380801f0);
/* IDE1 = GPCS7 3f6 */
- write_mmcr_long(SC520_PAR4, 0x3c0003f6);
+ write_mmcr_long(SC520_PAR4, 0x3c0003f6);
/* bootcs */
- write_mmcr_long(SC520_PAR12, 0x8bffe800);
+ write_mmcr_long(SC520_PAR12, 0x8bffe800);
/* romcs2 */
- write_mmcr_long(SC520_PAR13, 0xcbfff000);
+ write_mmcr_long(SC520_PAR13, 0xcbfff000);
/* romcs1 */
- write_mmcr_long(SC520_PAR14, 0xabfff800);
+ write_mmcr_long(SC520_PAR14, 0xabfff800);
/* 680 LEDS */
- write_mmcr_long(SC520_PAR15, 0x30000640);
-
+ write_mmcr_long(SC520_PAR15, 0x30000640);
+
write_mmcr_byte(SC520_ADDDECCTL, 0);
-
- asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */
+
+ asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */
if (CFG_USE_SIO_UART) {
- write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | UART2_DIS|UART1_DIS);
+ write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | UART2_DIS|UART1_DIS);
setup_ali_sio(1);
} else {
write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS));
@@ -321,21 +319,21 @@ static void bus_init(void)
* PAR15 Port 0x680 LED display
*/
-/*
+/*
* This function should map a chunk of size bytes
* of the system address space to the ISA bus
- *
+ *
* The function will return the memory address
* as seen by the host (which may very will be the
* same as the bus address)
*/
-u32 isa_map_rom(u32 bus_addr, int size)
+u32 isa_map_rom(u32 bus_addr, int size)
{
u32 par;
-
- PRINTF("isa_map_rom asked to map %d bytes at %x\n",
+
+ PRINTF("isa_map_rom asked to map %d bytes at %x\n",
size, bus_addr);
-
+
par = size;
if (par < 0x80000) {
par = 0x80000;
@@ -346,12 +344,12 @@ u32 isa_map_rom(u32 bus_addr, int size)
par <<= 18;
par |= (bus_addr>>12);
par |= 0x50000000;
-
+
PRINTF ("setting PAR11 to %x\n", par);
-
+
/* Map rom 0x10000 with PAR1 */
write_mmcr_long(SC520_PAR11, par);
-
+
return bus_addr;
}
@@ -372,19 +370,19 @@ void isa_unmap_rom(u32 addr)
#ifdef CONFIG_PCI
#define PCI_ROM_TEMP_SPACE 0x10000
-/*
+/*
* This function should map a chunk of size bytes
* of the system address space to the PCI bus,
* suitable to map PCI ROMS (bus address < 16M)
* the function will return the host memory address
* which should be converted into a bus address
- * before used to configure the PCI rom address
+ * before used to configure the PCI rom address
* decoder
*/
-u32 pci_get_rom_window(struct pci_controller *hose, int size)
+u32 pci_get_rom_window(struct pci_controller *hose, int size)
{
u32 par;
-
+
par = size;
if (par < 0x80000) {
par = 0x80000;
@@ -395,12 +393,12 @@ u32 pci_get_rom_window(struct pci_controller *hose, int size)
par <<= 14;
par |= (PCI_ROM_TEMP_SPACE>>16);
par |= 0x72000000;
-
+
PRINTF ("setting PAR1 to %x\n", par);
-
+
/* Map rom 0x10000 with PAR1 */
write_mmcr_long(SC520_PAR1, par);
-
+
return PCI_ROM_TEMP_SPACE;
}
@@ -417,61 +415,61 @@ void pci_remove_rom_window(struct pci_controller *hose, u32 addr)
return;
}
PRINTF(" not ours\n");
-
+
}
/*
* This function is called in order to provide acces to the
- * legacy video I/O ports on the PCI bus.
- * After this function accesses to I/O ports 0x3b0-0x3bb and
+ * legacy video I/O ports on the PCI bus.
+ * After this function accesses to I/O ports 0x3b0-0x3bb and
* 0x3c0-0x3df shuld result in transactions on the PCI bus.
- *
+ *
*/
int pci_enable_legacy_video_ports(struct pci_controller *hose)
{
/* Map video memory to 0xa0000*/
write_mmcr_long(SC520_PAR0, 0x7200400a);
-
+
/* forward all I/O accesses to PCI */
- write_mmcr_byte(SC520_ADDDECCTL,
- read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI);
-
-
+ write_mmcr_byte(SC520_ADDDECCTL,
+ read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI);
+
+
/* so we map away all io ports to pci (only way to access pci io
* below 0x400. But then we have to map back the portions that we dont
* use so that the generate cycles on the GPIO bus where the sio and
- * ISA slots are connected, this requre the use of several PAR registers
+ * ISA slots are connected, this requre the use of several PAR registers
*/
-
+
/* bring 0x100 - 0x1ef back to ISA using PAR5 */
- write_mmcr_long(SC520_PAR5, 0x30ef0100);
-
+ write_mmcr_long(SC520_PAR5, 0x30ef0100);
+
/* IDE use 1f0-1f7 */
-
+
/* bring 0x1f8 - 0x2f7 back to ISA using PAR6 */
- write_mmcr_long(SC520_PAR6, 0x30ff01f8);
-
+ write_mmcr_long(SC520_PAR6, 0x30ff01f8);
+
/* com2 use 2f8-2ff */
-
+
/* bring 0x300 - 0x3af back to ISA using PAR7 */
- write_mmcr_long(SC520_PAR7, 0x30af0300);
-
+ write_mmcr_long(SC520_PAR7, 0x30af0300);
+
/* vga use 3b0-3bb */
-
+
/* bring 0x3bc - 0x3bf back to ISA using PAR8 */
- write_mmcr_long(SC520_PAR8, 0x300303bc);
-
+ write_mmcr_long(SC520_PAR8, 0x300303bc);
+
/* vga use 3c0-3df */
-
+
/* bring 0x3e0 - 0x3f5 back to ISA using PAR9 */
- write_mmcr_long(SC520_PAR9, 0x301503e0);
-
+ write_mmcr_long(SC520_PAR9, 0x301503e0);
+
/* ide use 3f6 */
-
+
/* bring 0x3f7 back to ISA using PAR10 */
- write_mmcr_long(SC520_PAR10, 0x300003f7);
-
- /* com1 use 3f8-3ff */
+ write_mmcr_long(SC520_PAR10, 0x300003f7);
+
+ /* com1 use 3f8-3ff */
return 0;
}
@@ -484,20 +482,20 @@ int pci_enable_legacy_video_ports(struct pci_controller *hose)
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
-
- init_sc520();
+
+ init_sc520();
bus_init();
irq_init();
-
+
/* max drive current on SDRAM */
write_mmcr_word(SC520_DSCTL, 0x0100);
-
+
/* enter debug mode after next reset (only if jumper is also set) */
write_mmcr_byte(SC520_RESCFG, 0x08);
/* configure the software timer to 33.333MHz */
write_mmcr_byte(SC520_SWTMRCFG, 0);
gd->bus_clk = 33333000;
-
+
return 0;
}
@@ -518,98 +516,96 @@ int last_stage_init(void)
{
int minor;
int major;
-
+
major = minor = 0;
major |= ali512x_cio_in(23)?2:0;
major |= ali512x_cio_in(22)?1:0;
minor |= ali512x_cio_in(21)?2:0;
minor |= ali512x_cio_in(20)?1:0;
-
+
printf("AMD SC520 CDP revision %d.%d\n", major, minor);
-
+
return 0;
}
-
-void ssi_chip_select(int dev)
+void ssi_chip_select(int dev)
{
-
+
/* Spunk board: SPI EEPROM is active-low, MW EEPROM and AUX are active high */
switch (dev) {
case 1: /* SPI EEPROM */
ali512x_cio_out(16, 0);
break;
-
+
case 2: /* MW EEPROM */
ali512x_cio_out(15, 1);
break;
-
- case 3: /* AUX */
+
+ case 3: /* AUX */
ali512x_cio_out(14, 1);
break;
-
+
case 0:
ali512x_cio_out(16, 1);
ali512x_cio_out(15, 0);
ali512x_cio_out(14, 0);
break;
-
+
default:
printf("Illegal SSI device requested: %d\n", dev);
}
}
-void spi_init_f(void)
+void spi_init_f(void)
{
#ifdef CONFIG_SC520_CDP_USE_SPI
- spi_eeprom_probe(1);
-#endif
+ spi_eeprom_probe(1);
+#endif
#ifdef CONFIG_SC520_CDP_USE_MW
mw_eeprom_probe(2);
-#endif
+#endif
}
-ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
+ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
{
int offset;
int i;
ssize_t res;
-
+
offset = 0;
for (i=0;i<alen;i++) {
offset <<= 8;
offset |= addr[i];
}
-
+
#ifdef CONFIG_SC520_CDP_USE_SPI
- res = spi_eeprom_read(1, offset, buffer, len);
-#endif
+ res = spi_eeprom_read(1, offset, buffer, len);
+#endif
#ifdef CONFIG_SC520_CDP_USE_MW
res = mw_eeprom_read(2, offset, buffer, len);
-#endif
+#endif
return res;
}
-ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
+ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
{
int offset;
int i;
ssize_t res;
-
+
offset = 0;
for (i=0;i<alen;i++) {
offset <<= 8;
offset |= addr[i];
}
-
+
#ifdef CONFIG_SC520_CDP_USE_SPI
res = spi_eeprom_write(1, offset, buffer, len);
-#endif
+#endif
#ifdef CONFIG_SC520_CDP_USE_MW
res = mw_eeprom_write(2, offset, buffer, len);
-#endif
+#endif
return res;
}
-
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 03:47:57 +0000