diff options
Diffstat (limited to 'board/prodrive/p3mx/mv_eth.c')
| -rw-r--r-- | board/prodrive/p3mx/mv_eth.c | 3418 |
1 files changed, 3418 insertions, 0 deletions
diff --git a/board/prodrive/p3mx/mv_eth.c b/board/prodrive/p3mx/mv_eth.c new file mode 100644 index 000000000..112767364 --- /dev/null +++ b/board/prodrive/p3mx/mv_eth.c @@ -0,0 +1,3418 @@ +/* + * (C) Copyright 2003 + * Ingo Assmus <ingo.assmus@keymile.com> + * + * based on - Driver for MV64460X ethernet ports + * Copyright (C) 2002 rabeeh@galileo.co.il + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + 3 the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * mv_eth.c - header file for the polled mode GT ethernet driver + */ +#include <common.h> +#include <net.h> +#include <malloc.h> +#include <miiphy.h> + +#include "mv_eth.h" + +/* enable Debug outputs */ + +#undef DEBUG_MV_ETH + +#ifdef DEBUG_MV_ETH +#define DEBUG +#define DP(x) x +#else +#define DP(x) +#endif + +/* PHY DFCDL Registers */ +#define ETH_PHY_DFCDL_CONFIG0_REG 0x2100 +#define ETH_PHY_DFCDL_CONFIG1_REG 0x2104 +#define ETH_PHY_DFCDL_ADDR_REG 0x2110 +#define ETH_PHY_DFCDL_DATA0_REG 0x2114 + +#define PHY_AUTONEGOTIATE_TIMEOUT 4000 /* 4000 ms autonegotiate timeout */ +#define PHY_UPDATE_TIMEOUT 10000 + +#undef MV64460_CHECKSUM_OFFLOAD +/************************************************************************* +************************************************************************** +************************************************************************** +* The first part is the high level driver of the gigE ethernet ports. * +************************************************************************** +************************************************************************** +*************************************************************************/ + +/* Definition for configuring driver */ +/* #define UPDATE_STATS_BY_SOFTWARE */ +#undef MV64460_RX_QUEUE_FILL_ON_TASK + + +/* Constants */ +#define MAGIC_ETH_RUNNING 8031971 +#define MV64460_INTERNAL_SRAM_SIZE _256K +#define EXTRA_BYTES 32 +#define WRAP ETH_HLEN + 2 + 4 + 16 +#define BUFFER_MTU dev->mtu + WRAP +#define INT_CAUSE_UNMASK_ALL 0x0007ffff +#define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff +#ifdef MV64460_RX_FILL_ON_TASK +#define INT_CAUSE_MASK_ALL 0x00000000 +#define INT_CAUSE_CHECK_BITS INT_CAUSE_UNMASK_ALL +#define INT_CAUSE_CHECK_BITS_EXT INT_CAUSE_UNMASK_ALL_EXT +#endif + +/* Read/Write to/from MV64460 internal registers */ +#define MV_REG_READ(offset) my_le32_to_cpu(* (volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset)) +#define MV_REG_WRITE(offset,data) *(volatile unsigned int *) (INTERNAL_REG_BASE_ADDR + offset) = my_cpu_to_le32 (data) +#define MV_SET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) |= ((unsigned int)my_cpu_to_le32(bits))) +#define MV_RESET_REG_BITS(regOffset,bits) ((*((volatile unsigned int*)((INTERNAL_REG_BASE_ADDR) + (regOffset)))) &= ~((unsigned int)my_cpu_to_le32(bits))) + +#define my_cpu_to_le32(x) my_le32_to_cpu((x)) + +/* Static function declarations */ +static int mv64460_eth_real_open (struct eth_device *eth); +static int mv64460_eth_real_stop (struct eth_device *eth); +static struct net_device_stats *mv64460_eth_get_stats (struct eth_device + *dev); +static void eth_port_init_mac_tables (ETH_PORT eth_port_num); +static void mv64460_eth_update_stat (struct eth_device *dev); +bool db64460_eth_start (struct eth_device *eth); +unsigned int eth_read_mib_counter (ETH_PORT eth_port_num, + unsigned int mib_offset); +int mv64460_eth_receive (struct eth_device *dev); + +int mv64460_eth_xmit (struct eth_device *, volatile void *packet, int length); + +int mv_miiphy_read(char *devname, unsigned char phy_addr, + unsigned char phy_reg, unsigned short *value); +int mv_miiphy_write(char *devname, unsigned char phy_addr, + unsigned char phy_reg, unsigned short value); + +int phy_setup_aneg (char *devname, unsigned char addr); + +#ifndef UPDATE_STATS_BY_SOFTWARE +static void mv64460_eth_print_stat (struct eth_device *dev); +#endif +/* Processes a received packet */ +extern void NetReceive (volatile uchar *, int); + +extern unsigned int INTERNAL_REG_BASE_ADDR; + +unsigned long my_le32_to_cpu (unsigned long x) +{ + return (((x & 0x000000ffU) << 24) | + ((x & 0x0000ff00U) << 8) | + ((x & 0x00ff0000U) >> 8) | ((x & 0xff000000U) >> 24)); +} + +/************************************************* + *Helper functions - used inside the driver only * + *************************************************/ +#ifdef DEBUG_MV_ETH +void print_globals (struct eth_device *dev) +{ + printf ("Ethernet PRINT_Globals-Debug function\n"); + printf ("Base Address for ETH_PORT_INFO: %08x\n", + (unsigned int) dev->priv); + printf ("Base Address for mv64460_eth_priv: %08x\n", + (unsigned int) &(((ETH_PORT_INFO *) dev->priv)-> + port_private)); + + printf ("GT Internal Base Address: %08x\n", + INTERNAL_REG_BASE_ADDR); + printf ("Base Address for TX-DESCs: %08x Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_tx_desc_area_base[0], MV64460_TX_QUEUE_SIZE); + printf ("Base Address for RX-DESCs: %08x Number of allocated Buffers %d\n", (unsigned int) ((ETH_PORT_INFO *) dev->priv)->p_rx_desc_area_base[0], MV64460_RX_QUEUE_SIZE); + printf ("Base Address for RX-Buffer: %08x allocated Bytes %d\n", + (unsigned int) ((ETH_PORT_INFO *) dev->priv)-> + p_rx_buffer_base[0], + (MV64460_RX_QUEUE_SIZE * MV64460_RX_BUFFER_SIZE) + 32); + printf ("Base Address for TX-Buffer: %08x allocated Bytes %d\n", + (unsigned int) ((ETH_PORT_INFO *) dev->priv)-> + p_tx_buffer_base[0], + (MV64460_TX_QUEUE_SIZE * MV64460_TX_BUFFER_SIZE) + 32); +} +#endif + + + +/********************************************************************** + * mv64460_eth_print_phy_status + * + * Prints gigabit ethenret phy status + * + * Input : pointer to ethernet interface network device structure + * Output : N/A + **********************************************************************/ +void mv64460_eth_print_phy_status (struct eth_device *dev) +{ + struct mv64460_eth_priv *port_private; + unsigned int port_num; + ETH_PORT_INFO *ethernet_private = (ETH_PORT_INFO *) dev->priv; + unsigned int port_status, phy_reg_data; + + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + /* Check Link status on phy */ + eth_port_read_smi_reg (port_num, 1, &phy_reg_data); + if (!(phy_reg_data & 0x20)) { + printf ("Ethernet port changed link status to DOWN\n"); + } else { + port_status = + MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num)); + printf ("Ethernet status port %d: Link up", port_num); + printf (", %s", + (port_status & BIT2) ? "Full Duplex" : "Half Duplex"); + if (port_status & BIT4) + printf (", Speed 1 Gbps"); + else + printf (", %s", + (port_status & BIT5) ? "Speed 100 Mbps" : + "Speed 10 Mbps"); + printf ("\n"); + } +} + +/********************************************************************** + * u-boot entry functions for mv64460_eth + * + **********************************************************************/ +int db64460_eth_probe (struct eth_device *dev) +{ + return ((int) db64460_eth_start (dev)); +} + +int db64460_eth_poll (struct eth_device *dev) +{ + return mv64460_eth_receive (dev); +} + +int db64460_eth_transmit (struct eth_device *dev, volatile void *packet, + int length) +{ + mv64460_eth_xmit (dev, packet, length); + return 0; +} + +void db64460_eth_disable (struct eth_device *dev) +{ + mv64460_eth_stop (dev); +} + + +#define DFCDL(write,read) ((write << 6) | read) +unsigned int ethDfcdls[] = { DFCDL(0,0), + DFCDL(1,1), + DFCDL(2,2), + DFCDL(3,3), + DFCDL(4,4), + DFCDL(5,5), + DFCDL(6,6), + DFCDL(7,7), + DFCDL(8,8), + DFCDL(9,9), + DFCDL(10,10), + DFCDL(11,11), + DFCDL(12,12), + DFCDL(13,13), + DFCDL(14,14), + DFCDL(15,15), + DFCDL(16,16), + DFCDL(17,17), + DFCDL(18,18), + DFCDL(19,19), + DFCDL(20,20), + DFCDL(21,21), + DFCDL(22,22), + DFCDL(23,23), + DFCDL(24,24), + DFCDL(25,25), + DFCDL(26,26), + DFCDL(27,27), + DFCDL(28,28), + DFCDL(29,29), + DFCDL(30,30), + DFCDL(31,31), + DFCDL(32,32), + DFCDL(33,33), + DFCDL(34,34), + DFCDL(35,35), + DFCDL(36,36), + DFCDL(37,37), + DFCDL(38,38), + DFCDL(39,39), + DFCDL(40,40), + DFCDL(41,41), + DFCDL(42,42), + DFCDL(43,43), + DFCDL(44,44), + DFCDL(45,45), + DFCDL(46,46), + DFCDL(47,47), + DFCDL(48,48), + DFCDL(49,49), + DFCDL(50,50), + DFCDL(51,51), + DFCDL(52,52), + DFCDL(53,53), + DFCDL(54,54), + DFCDL(55,55), + DFCDL(56,56), + DFCDL(57,57), + DFCDL(58,58), + DFCDL(59,59), + DFCDL(60,60), + DFCDL(61,61), + DFCDL(62,62), + DFCDL(63,63) }; + +void mv_eth_phy_init(void) +{ + int i; + + MV_REG_WRITE(ETH_PHY_DFCDL_ADDR_REG, 0); + + for (i = 0 ; i < 64; i++) { + MV_REG_WRITE(ETH_PHY_DFCDL_DATA0_REG, ethDfcdls[i]); + } + + MV_REG_WRITE(ETH_PHY_DFCDL_CONFIG0_REG,0x300000); +} + +void mv6446x_eth_initialize (bd_t * bis) +{ + struct eth_device *dev; + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + int devnum, x, temp; + char *s, *e, buf[64]; + +/* P3M750 only + * Set RGMII clock drives strength + */ + temp = MV_REG_READ(0x20A0); + temp |= 0x04000080; + MV_REG_WRITE(0x20A0, temp); + + mv_eth_phy_init(); + + for (devnum = 0; devnum < MV_ETH_DEVS; devnum++) { + dev = calloc (sizeof (*dev), 1); + if (!dev) { + printf ("%s: mv_enet%d allocation failure, %s\n", + __FUNCTION__, devnum, "eth_device structure"); + return; + } + + /* must be less than NAMESIZE (16) */ + sprintf (dev->name, "mv_enet%d", devnum); + +#ifdef DEBUG + printf ("Initializing %s\n", dev->name); +#endif + + /* Extract the MAC address from the environment */ + switch (devnum) { + case 0: + s = "ethaddr"; + break; + + case 1: + s = "eth1addr"; + break; + + case 2: + s = "eth2addr"; + break; + + default: /* this should never happen */ + printf ("%s: Invalid device number %d\n", + __FUNCTION__, devnum); + return; + } + + temp = getenv_r (s, buf, sizeof (buf)); + s = (temp > 0) ? buf : NULL; + +#ifdef DEBUG + printf ("Setting MAC %d to %s\n", devnum, s); +#endif + for (x = 0; x < 6; ++x) { + dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } + /* ronen - set the MAC addr in the HW */ + eth_port_uc_addr_set (devnum, dev->enetaddr, 0); + + dev->init = (void *) db64460_eth_probe; + dev->halt = (void *) ethernet_phy_reset; + dev->send = (void *) db64460_eth_transmit; + dev->recv = (void *) db64460_eth_poll; + + ethernet_private = calloc (sizeof (*ethernet_private), 1); + dev->priv = (void *)ethernet_private; + if (!ethernet_private) { + printf ("%s: %s allocation failure, %s\n", + __FUNCTION__, dev->name, + "Private Device Structure"); + free (dev); + return; + } + /* start with an zeroed ETH_PORT_INFO */ + memset (ethernet_private, 0, sizeof (ETH_PORT_INFO)); + memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6); + + /* set pointer to memory for stats data structure etc... */ + port_private = calloc (sizeof (*ethernet_private), 1); + ethernet_private->port_private = (void *)port_private; + if (!port_private) { + printf ("%s: %s allocation failure, %s\n", + __FUNCTION__, dev->name, + "Port Private Device Structure"); + + free (ethernet_private); + free (dev); + return; + } + + port_private->stats = + calloc (sizeof (struct net_device_stats), 1); + if (!port_private->stats) { + printf ("%s: %s allocation failure, %s\n", + __FUNCTION__, dev->name, + "Net stat Structure"); + + free (port_private); + free (ethernet_private); + free (dev); + return; + } + memset (ethernet_private->port_private, 0, + sizeof (struct mv64460_eth_priv)); + switch (devnum) { + case 0: + ethernet_private->port_num = ETH_0; + break; + case 1: + ethernet_private->port_num = ETH_1; + break; + case 2: + ethernet_private->port_num = ETH_2; + break; + default: + printf ("Invalid device number %d\n", devnum); + break; + }; + + port_private->port_num = devnum; + /* + * Read MIB counter on the GT in order to reset them, + * then zero all the stats fields in memory + */ + mv64460_eth_update_stat (dev); + memset (port_private->stats, 0, + sizeof (struct net_device_stats)); + /* Extract the MAC address from the environment */ + switch (devnum) { + case 0: + s = "ethaddr"; + break; + + case 1: + s = "eth1addr"; + break; + + case 2: + s = "eth2addr"; + break; + + default: /* this should never happen */ + printf ("%s: Invalid device number %d\n", + __FUNCTION__, devnum); + return; + } + + temp = getenv_r (s, buf, sizeof (buf)); + s = (temp > 0) ? buf : NULL; + +#ifdef DEBUG + printf ("Setting MAC %d to %s\n", devnum, s); +#endif + for (x = 0; x < 6; ++x) { + dev->enetaddr[x] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } + + DP (printf ("Allocating descriptor and buffer rings\n")); + + ethernet_private->p_rx_desc_area_base[0] = + (ETH_RX_DESC *) memalign (16, + RX_DESC_ALIGNED_SIZE * + MV64460_RX_QUEUE_SIZE + 1); + ethernet_private->p_tx_desc_area_base[0] = + (ETH_TX_DESC *) memalign (16, + TX_DESC_ALIGNED_SIZE * + MV64460_TX_QUEUE_SIZE + 1); + + ethernet_private->p_rx_buffer_base[0] = + (char *) memalign (16, + MV64460_RX_QUEUE_SIZE * + MV64460_TX_BUFFER_SIZE + 1); + ethernet_private->p_tx_buffer_base[0] = + (char *) memalign (16, + MV64460_RX_QUEUE_SIZE * + MV64460_TX_BUFFER_SIZE + 1); + +#ifdef DEBUG_MV_ETH + /* DEBUG OUTPUT prints adresses of globals */ + print_globals (dev); +#endif + eth_register (dev); + + miiphy_register(dev->name, mv_miiphy_read, mv_miiphy_write); + } + DP (printf ("%s: exit\n", __FUNCTION__)); + +} + +/********************************************************************** + * mv64460_eth_open + * + * This function is called when openning the network device. The function + * should initialize all the hardware, initialize cyclic Rx/Tx + * descriptors chain and buffers and allocate an IRQ to the network + * device. + * + * Input : a pointer to the network device structure + * / / ronen - changed the output to match net/eth.c needs + * Output : nonzero of success , zero if fails. + * under construction + **********************************************************************/ + +int mv64460_eth_open (struct eth_device *dev) +{ + return (mv64460_eth_real_open (dev)); +} + +/* Helper function for mv64460_eth_open */ +static int mv64460_eth_real_open (struct eth_device *dev) +{ + + unsigned int queue; + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + u32 port_status; + ushort reg_short; + int speed; + int duplex; + int i; + int reg; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + /* ronen - when we update the MAC env params we only update dev->enetaddr + see ./net/eth.c eth_set_enetaddr() */ + memcpy (ethernet_private->port_mac_addr, dev->enetaddr, 6); + + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + /* Stop RX Queues */ + MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num), + 0x0000ff00); + + /* Clear the ethernet port interrupts */ + MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0); + MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0); + + /* Unmask RX buffer and TX end interrupt */ + MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num), + INT_CAUSE_UNMASK_ALL); + + /* Unmask phy and link status changes interrupts */ + MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), + INT_CAUSE_UNMASK_ALL_EXT); + + /* Set phy address of the port */ + ethernet_private->port_phy_addr = 0x1 + (port_num << 1); + reg = ethernet_private->port_phy_addr; + + /* Activate the DMA channels etc */ + eth_port_init (ethernet_private); + + /* "Allocate" setup TX rings */ + + for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) { + unsigned int size; + + port_private->tx_ring_size[queue] = MV64460_TX_QUEUE_SIZE; + size = (port_private->tx_ring_size[queue] * TX_DESC_ALIGNED_SIZE); /*size = no of DESCs times DESC-size */ + ethernet_private->tx_desc_area_size[queue] = size; + + /* first clear desc area completely */ + memset ((void *) ethernet_private->p_tx_desc_area_base[queue], + 0, ethernet_private->tx_desc_area_size[queue]); + + /* initialize tx desc ring with low level driver */ + if (ether_init_tx_desc_ring + (ethernet_private, ETH_Q0, + port_private->tx_ring_size[queue], + MV64460_TX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ , + (unsigned int) ethernet_private-> + p_tx_desc_area_base[queue], + (unsigned int) ethernet_private-> + p_tx_buffer_base[queue]) == false) + printf ("### Error initializing TX Ring\n"); + } + + /* "Allocate" setup RX rings */ + for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) { + unsigned int size; + + /* Meantime RX Ring are fixed - but must be configurable by user */ + port_private->rx_ring_size[queue] = MV64460_RX_QUEUE_SIZE; + size = (port_private->rx_ring_size[queue] * + RX_DESC_ALIGNED_SIZE); + ethernet_private->rx_desc_area_size[queue] = size; + + /* first clear desc area completely */ + memset ((void *) ethernet_private->p_rx_desc_area_base[queue], + 0, ethernet_private->rx_desc_area_size[queue]); + if ((ether_init_rx_desc_ring + (ethernet_private, ETH_Q0, + port_private->rx_ring_size[queue], + MV64460_RX_BUFFER_SIZE /* Each Buffer is 1600 Byte */ , + (unsigned int) ethernet_private-> + p_rx_desc_area_base[queue], + (unsigned int) ethernet_private-> + p_rx_buffer_base[queue])) == false) + printf ("### Error initializing RX Ring\n"); + } + + eth_port_start (ethernet_private); + + /* Set maximum receive buffer to 9700 bytes */ + MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num), + (0x5 << 17) | + (MV_REG_READ + (MV64460_ETH_PORT_SERIAL_CONTROL_REG (port_num)) + & 0xfff1ffff)); + + /* + * Set ethernet MTU for leaky bucket mechanism to 0 - this will + * disable the leaky bucket mechanism . + */ + + MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (port_num), 0); + port_status = MV_REG_READ (MV64460_ETH_PORT_STATUS_REG (port_num)); + +#if defined(CONFIG_PHY_RESET) + /* + * Reset the phy, only if its the first time through + * otherwise, just check the speeds & feeds + */ + if (port_private->first_init == 0) { + port_private->first_init = 1; + ethernet_phy_reset (port_num); + + /* Start/Restart autonegotiation */ + phy_setup_aneg (dev->name, reg); + udelay (1000); + } +#endif /* defined(CONFIG_PHY_RESET) */ + + miiphy_read (dev->name, reg, PHY_BMSR, ®_short); + + /* + * Wait if PHY is capable of autonegotiation and autonegotiation is not complete + */ + if ((reg_short & PHY_BMSR_AUTN_ABLE) + && !(reg_short & PHY_BMSR_AUTN_COMP)) { + puts ("Waiting for PHY auto negotiation to complete"); + i = 0; + while (!(reg_short & PHY_BMSR_AUTN_COMP)) { + /* + * Timeout reached ? + */ + if (i > PHY_AUTONEGOTIATE_TIMEOUT) { + puts (" TIMEOUT !\n"); + break; + } + + if ((i++ % 1000) == 0) { + putc ('.'); + } + udelay (1000); /* 1 ms */ + miiphy_read (dev->name, reg, PHY_BMSR, ®_short); + + } + puts (" done\n"); + udelay (500000); /* another 500 ms (results in faster booting) */ + } + + speed = miiphy_speed (dev->name, reg); + duplex = miiphy_duplex (dev->name, reg); + + printf ("ENET Speed is %d Mbps - %s duplex connection\n", + (int) speed, (duplex == HALF) ? "HALF" : "FULL"); + + port_private->eth_running = MAGIC_ETH_RUNNING; + return 1; +} + + +static int mv64460_eth_free_tx_rings (struct eth_device *dev) +{ + unsigned int queue; + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + volatile ETH_TX_DESC *p_tx_curr_desc; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + /* Stop Tx Queues */ + MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG (port_num), + 0x0000ff00); + + /* Free TX rings */ + DP (printf ("Clearing previously allocated TX queues... ")); + for (queue = 0; queue < MV64460_TX_QUEUE_NUM; queue++) { + /* Free on TX rings */ + for (p_tx_curr_desc = + ethernet_private->p_tx_desc_area_base[queue]; + ((unsigned int) p_tx_curr_desc <= (unsigned int) + ethernet_private->p_tx_desc_area_base[queue] + + ethernet_private->tx_desc_area_size[queue]); + p_tx_curr_desc = + (ETH_TX_DESC *) ((unsigned int) p_tx_curr_desc + + TX_DESC_ALIGNED_SIZE)) { + /* this is inside for loop */ + if (p_tx_curr_desc->return_info != 0) { + p_tx_curr_desc->return_info = 0; + DP (printf ("freed\n")); + } + } + DP (printf ("Done\n")); + } + return 0; +} + +static int mv64460_eth_free_rx_rings (struct eth_device *dev) +{ + unsigned int queue; + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + volatile ETH_RX_DESC *p_rx_curr_desc; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + + /* Stop RX Queues */ + MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (port_num), + 0x0000ff00); + + /* Free RX rings */ + DP (printf ("Clearing previously allocated RX queues... ")); + for (queue = 0; queue < MV64460_RX_QUEUE_NUM; queue++) { + /* Free preallocated skb's on RX rings */ + for (p_rx_curr_desc = + ethernet_private->p_rx_desc_area_base[queue]; + (((unsigned int) p_rx_curr_desc < + ((unsigned int) ethernet_private-> + p_rx_desc_area_base[queue] + + ethernet_private->rx_desc_area_size[queue]))); + p_rx_curr_desc = + (ETH_RX_DESC *) ((unsigned int) p_rx_curr_desc + + RX_DESC_ALIGNED_SIZE)) { + if (p_rx_curr_desc->return_info != 0) { + p_rx_curr_desc->return_info = 0; + DP (printf ("freed\n")); + } + } + DP (printf ("Done\n")); + } + return 0; +} + +/********************************************************************** + * mv64460_eth_stop + * + * This function is used when closing the network device. + * It updates the hardware, + * release all memory that holds buffers and descriptors and release the IRQ. + * Input : a pointer to the device structure + * Output : zero if success , nonzero if fails + *********************************************************************/ + +int mv64460_eth_stop (struct eth_device *dev) +{ + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + /* Disable all gigE address decoder */ + MV_REG_WRITE (MV64460_ETH_BASE_ADDR_ENABLE_REG, 0x3f); + DP (printf ("%s Ethernet stop called ... \n", __FUNCTION__)); + mv64460_eth_real_stop (dev); + + return 0; +}; + +/* Helper function for mv64460_eth_stop */ + +static int mv64460_eth_real_stop (struct eth_device *dev) +{ + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + mv64460_eth_free_tx_rings (dev); + mv64460_eth_free_rx_rings (dev); + + eth_port_reset (ethernet_private->port_num); + /* Disable ethernet port interrupts */ + MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_REG (port_num), 0); + MV_REG_WRITE (MV64460_ETH_INTERRUPT_CAUSE_EXTEND_REG (port_num), 0); + /* Mask RX buffer and TX end interrupt */ + MV_REG_WRITE (MV64460_ETH_INTERRUPT_MASK_REG (port_num), 0); + /* Mask phy and link status changes interrupts */ + MV_REG_WRITE (MV64460_ETH_INTERRUPT_EXTEND_MASK_REG (port_num), 0); + MV_RESET_REG_BITS (MV64460_CPU_INTERRUPT0_MASK_HIGH, + BIT0 << port_num); + /* Print Network statistics */ +#ifndef UPDATE_STATS_BY_SOFTWARE + /* + * Print statistics (only if ethernet is running), + * then zero all the stats fields in memory + */ + if (port_private->eth_running == MAGIC_ETH_RUNNING) { + port_private->eth_running = 0; + mv64460_eth_print_stat (dev); + } + memset (port_private->stats, 0, sizeof (struct net_device_stats)); +#endif + DP (printf ("\nEthernet stopped ... \n")); + return 0; +} + + +/********************************************************************** + * mv64460_eth_start_xmit + * + * This function is queues a packet in the Tx descriptor for + * required port. + * + * Input : skb - a pointer to socket buffer + * dev - a pointer to the required port + * + * Output : zero upon success + **********************************************************************/ + +int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr, + int dataSize) +{ + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + PKT_INFO pkt_info; + ETH_FUNC_RET_STATUS status; + struct net_device_stats *stats; + ETH_FUNC_RET_STATUS release_result; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + stats = port_private->stats; + + /* Update packet info data structure */ + pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */ + pkt_info.byte_cnt = dataSize; + pkt_info.buf_ptr = (unsigned int) dataPtr; + pkt_info.return_info = 0; + + status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info); + if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) { + printf ("Error on transmitting packet .."); + if (status == ETH_QUEUE_FULL) + printf ("ETH Queue is full. \n"); + if (status == ETH_QUEUE_LAST_RESOURCE) + printf ("ETH Queue: using last available resource. \n"); + goto error; + } + + /* Update statistics and start of transmittion time */ + stats->tx_bytes += dataSize; + stats->tx_packets++; + + /* Check if packet(s) is(are) transmitted correctly (release everything) */ + do { + release_result = + eth_tx_return_desc (ethernet_private, ETH_Q0, + &pkt_info); + switch (release_result) { + case ETH_OK: + DP (printf ("descriptor released\n")); + if (pkt_info.cmd_sts & BIT0) { + printf ("Error in TX\n"); + stats->tx_errors++; + } + break; + case ETH_RETRY: + DP (printf ("transmission still in process\n")); + break; + + case ETH_ERROR: + printf ("routine can not access Tx desc ring\n"); + break; + + case ETH_END_OF_JOB: + DP (printf ("the routine has nothing to release\n")); + break; + default: /* should not happen */ + break; + } + } while (release_result == ETH_OK); + + return 0; /* success */ + + error: + return 1; /* Failed - higher layers will free the skb */ +} + +/********************************************************************** + * mv64460_eth_receive + * + * This function is forward packets that are received from the port's + * queues toward kernel core or FastRoute them to another interface. + * + * Input : dev - a pointer to the required interface + * max - maximum number to receive (0 means unlimted) + * + * Output : number of served packets + **********************************************************************/ + +int mv64460_eth_receive (struct eth_device *dev) +{ + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + PKT_INFO pkt_info; + struct net_device_stats *stats; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + stats = port_private->stats; + + while ((eth_port_receive (ethernet_private, ETH_Q0, &pkt_info) == ETH_OK)) { +#ifdef DEBUG_MV_ETH + if (pkt_info.byte_cnt != 0) { + printf ("%s: Received %d byte Packet @ 0x%x\n", + __FUNCTION__, pkt_info.byte_cnt, + pkt_info.buf_ptr); + if(pkt_info.buf_ptr != 0){ + for(i=0; i < pkt_info.byte_cnt; i++){ + if((i % 4) == 0){ + printf("\n0x"); + } + printf("%02x", ((char*)pkt_info.buf_ptr)[i]); + } + printf("\n"); + } + } +#endif + /* Update statistics. Note byte count includes 4 byte CRC count */ + stats->rx_packets++; + stats->rx_bytes += pkt_info.byte_cnt; + + /* + * In case received a packet without first / last bits on OR the error + * summary bit is on, the packets needs to be dropeed. + */ + if (((pkt_info. + cmd_sts & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) != + (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) + || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) { + stats->rx_dropped++; + + printf ("Received packet spread on multiple descriptors\n"); + + /* Is this caused by an error ? */ + if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY) { + stats->rx_errors++; + } + + /* free these descriptors again without forwarding them to the higher layers */ + pkt_info.buf_ptr &= ~0x7; /* realign buffer again */ + pkt_info.byte_cnt = 0x0000; /* Reset Byte count */ + + if (eth_rx_return_buff + (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) { + printf ("Error while returning the RX Desc to Ring\n"); + } else { + DP (printf ("RX Desc returned to Ring\n")); + } + /* /free these descriptors again */ + } else { + +/* !!! call higher layer processing */ +#ifdef DEBUG_MV_ETH + printf ("\nNow send it to upper layer protocols (NetReceive) ...\n"); +#endif + /* let the upper layer handle the packet */ + NetReceive ((uchar *) pkt_info.buf_ptr, + (int) pkt_info.byte_cnt); + +/* **************************************************************** */ +/* free descriptor */ + pkt_info.buf_ptr &= ~0x7; /* realign buffer again */ + pkt_info.byte_cnt = 0x0000; /* Reset Byte count */ + DP (printf ("RX: pkt_info.buf_ptr = %x\n", pkt_info.buf_ptr)); + if (eth_rx_return_buff + (ethernet_private, ETH_Q0, &pkt_info) != ETH_OK) { + printf ("Error while returning the RX Desc to Ring\n"); + } else { + DP (printf ("RX: Desc returned to Ring\n")); + } + +/* **************************************************************** */ + + } + } + mv64460_eth_get_stats (dev); /* update statistics */ + return 1; +} + +/********************************************************************** + * mv64460_eth_get_stats + * + * Returns a pointer to the interface statistics. + * + * Input : dev - a pointer to the required interface + * + * Output : a pointer to the interface's statistics + **********************************************************************/ + +static struct net_device_stats *mv64460_eth_get_stats (struct eth_device *dev) +{ + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + unsigned int port_num; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + + mv64460_eth_update_stat (dev); + + return port_private->stats; +} + + +/********************************************************************** + * mv64460_eth_update_stat + * + * Update the statistics structure in the private data structure + * + * Input : pointer to ethernet interface network device structure + * Output : N/A + **********************************************************************/ + +static void mv64460_eth_update_stat (struct eth_device *dev) +{ + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + struct net_device_stats *stats; + unsigned int port_num; + volatile unsigned int dummy; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + stats = port_private->stats; + + /* These are false updates */ + stats->rx_packets += (unsigned long) + eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_GOOD_FRAMES_RECEIVED); + stats->tx_packets += (unsigned long) + eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_GOOD_FRAMES_SENT); + stats->rx_bytes += (unsigned long) + eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_GOOD_OCTETS_RECEIVED_LOW); + /* + * Ideally this should be as follows - + * + * stats->rx_bytes += stats->rx_bytes + + * ((unsigned long) ethReadMibCounter (ethernet_private->port_num , + * ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32); + * + * But the unsigned long in PowerPC and MIPS are 32bit. So the next read + * is just a dummy read for proper work of the GigE port + */ + dummy = eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH); + stats->tx_bytes += (unsigned long) + eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_GOOD_OCTETS_SENT_LOW); + dummy = eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_GOOD_OCTETS_SENT_HIGH); + stats->rx_errors += (unsigned long) + eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_MAC_RECEIVE_ERROR); + + /* Rx dropped is for received packet with CRC error */ + stats->rx_dropped += + (unsigned long) eth_read_mib_counter (ethernet_private-> + port_num, + ETH_MIB_BAD_CRC_EVENT); + stats->multicast += (unsigned long) + eth_read_mib_counter (ethernet_private->port_num, + ETH_MIB_MULTICAST_FRAMES_RECEIVED); + stats->collisions += + (unsigned long) eth_read_mib_counter (ethernet_private-> + port_num, + ETH_MIB_COLLISION) + + (unsigned long) eth_read_mib_counter (ethernet_private-> + port_num, + ETH_MIB_LATE_COLLISION); + /* detailed rx errors */ + stats->rx_length_errors += + (unsigned long) eth_read_mib_counter (ethernet_private-> + port_num, + ETH_MIB_UNDERSIZE_RECEIVED) + + + (unsigned long) eth_read_mib_counter (ethernet_private-> + port_num, + ETH_MIB_OVERSIZE_RECEIVED); + /* detailed tx errors */ +} + +#ifndef UPDATE_STATS_BY_SOFTWARE +/********************************************************************** + * mv64460_eth_print_stat + * + * Update the statistics structure in the private data structure + * + * Input : pointer to ethernet interface network device structure + * Output : N/A + **********************************************************************/ + +static void mv64460_eth_print_stat (struct eth_device *dev) +{ + ETH_PORT_INFO *ethernet_private; + struct mv64460_eth_priv *port_private; + struct net_device_stats *stats; + unsigned int port_num; + + ethernet_private = (ETH_PORT_INFO *) dev->priv; + port_private = + (struct mv64460_eth_priv *) ethernet_private->port_private; + port_num = port_private->port_num; + stats = port_private->stats; + + /* These are false updates */ + printf ("\n### Network statistics: ###\n"); + printf ("--------------------------\n"); + printf (" Packets received: %ld\n", stats->rx_packets); + printf (" Packets send: %ld\n", stats->tx_packets); + printf (" Received bytes: %ld\n", stats->rx_bytes); + printf (" Send bytes: %ld\n", stats->tx_bytes); + if (stats->rx_errors != 0) + printf (" Rx Errors: %ld\n", + stats->rx_errors); + if (stats->rx_dropped != 0) + printf (" Rx dropped (CRC Errors): %ld\n", + stats->rx_dropped); + if (stats->multicast != 0) + printf (" Rx mulicast frames: %ld\n", + stats->multicast); + if (stats->collisions != 0) + printf (" No. of collisions: %ld\n", + stats->collisions); + if (stats->rx_length_errors != 0) + printf (" Rx length errors: %ld\n", + stats->rx_length_errors); +} +#endif + +/************************************************************************** + *network_start - Network Kick Off Routine UBoot + *Inputs : + *Outputs : + **************************************************************************/ + +bool db64460_eth_start (struct eth_device *dev) +{ + return (mv64460_eth_open (dev)); /* calls real open */ +} + +/************************************************************************* +************************************************************************** +************************************************************************** +* The second part is the low level driver of the gigE ethernet ports. * +************************************************************************** +************************************************************************** +*************************************************************************/ +/* + * based on Linux code + * arch/ppc/galileo/EVB64460/mv64460_eth.c - Driver for MV64460X ethernet ports + * Copyright (C) 2002 rabeeh@galileo.co.il + + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +/******************************************************************************** + * Marvell's Gigabit Ethernet controller low level driver + * + * DESCRIPTION: + * This file introduce low level API to Marvell's Gigabit Ethernet + * controller. This Gigabit Ethernet Controller driver API controls + * 1) Operations (i.e. port init, start, reset etc'). + * 2) Data flow (i.e. port send, receive etc'). + * Each Gigabit Ethernet port is controlled via ETH_PORT_INFO + * struct. + * This struct includes user configuration information as well as + * driver internal data needed for its operations. + * + * Supported Features: + * - This low level driver is OS independent. Allocating memory for + * the descriptor rings and buffers are not within the scope of + * this driver. + * - The user is free from Rx/Tx queue managing. + * - This low level driver introduce functionality API that enable + * the to operate Marvell's Gigabit Ethernet Controller in a + * convenient way. + * - Simple Gigabit Ethernet port operation API. + * - Simple Gigabit Ethernet port data flow API. + * - Data flow and operation API support per queue functionality. + * - Support cached descriptors for better performance. + * - Enable access to all four DRAM banks and internal SRAM memory + * spaces. + * - PHY access and control API. + * - Port control register configuration API. + * - Full control over Unicast and Multicast MAC configurations. + * + * Operation flow: + * + * Initialization phase + * This phase complete the initialization of the ETH_PORT_INFO + * struct. + * User information regarding port configuration has to be set + * prior to calling the port initialization routine. For example, + * the user has to assign the port_phy_addr field which is board + * depended parameter. + * In this phase any port Tx/Rx activity is halted, MIB counters + * are cleared, PHY address is set according to user parameter and + * access to DRAM and internal SRAM memory spaces. + * + * Driver ring initialization + * Allocating memory for the descriptor rings and buffers is not + * within the scope of this driver. Thus, the user is required to + * allocate memory for the descriptors ring and buffers. Those + * memory parameters are used by the Rx and Tx ring initialization + * routines in order to curve the descriptor linked list in a form + * of a ring. + * Note: Pay special attention to alignment issues when using + * cached descriptors/buffers. In this phase the driver store + * information in the ETH_PORT_INFO struct regarding each queue + * ring. + * + * Driver start + * This phase prepares the Ethernet port for Rx and Tx activity. + * It uses the information stored in the ETH_PORT_INFO struct to + * initialize the various port registers. + * + * Data flow: + * All packet references to/from the driver are done using PKT_INFO + * struct. + * This struct is a unified struct used with Rx and Tx operations. + * This way the user is not required to be familiar with neither + * Tx nor Rx descriptors structures. + * The driver's descriptors rings are management by indexes. + * Those indexes controls the ring resources and used to indicate + * a SW resource error: + * 'current' + * This index points to the current available resource for use. For + * example in Rx process this index will point to the descriptor + * that will be passed to the user upon calling the receive routine. + * In Tx process, this index will point to the descriptor + * that will be assigned with the user packet info and transmitted. + * 'used' + * This index points to the descriptor that need to restore its + * resources. For example in Rx process, using the Rx buffer return + * API will attach the buffer returned in packet info to the + * descriptor pointed by 'used'. In Tx process, using the Tx + * descriptor return will merely return the user packet info with + * the command status of the transmitted buffer pointed by the + * 'used' index. Nevertheless, it is essential to use this routine + * to update the 'used' index. + * 'first' + * This index supports Tx Scatter-Gather. It points to the first + * descriptor of a packet assembled of multiple buffers. For example + * when in middle of Such packet we have a Tx resource error the + * 'curr' index get the value of 'first' to indicate that the ring + * returned to its state before trying to transmit this packet. + * + * Receive operation: + * The eth_port_receive API set the packet information struct, + * passed by the caller, with received information from the + * 'current' SDMA descriptor. + * It is the user responsibility to return this resource back + * to the Rx descriptor ring to enable the reuse of this source. + * Return Rx resource is done using the eth_rx_return_buff API. + * + * Transmit operation: + * The eth_port_send API supports Scatter-Gather which enables to + * send a packet spanned over multiple buffers. This means that + * for each packet info structure given by the user and put into + * the Tx descriptors ring, will be transmitted only if the 'LAST' + * bit will be set in the packet info command status field. This + * API also consider restriction regarding buffer alignments and + * sizes. + * The user must return a Tx resource after ensuring the buffer + * has been transmitted to enable the Tx ring indexes to update. + * + * BOARD LAYOUT + * This device is on-board. No jumper diagram is necessary. + * + * EXTERNAL INTERFACE + * + * Prior to calling the initialization routine eth_port_init() the user + * must set the following fields under ETH_PORT_INFO struct: + * port_num User Ethernet port number. + * port_phy_addr User PHY address of Ethernet port. + * port_mac_addr[6] User defined port MAC address. + * port_config User port configuration value. + * port_config_extend User port config extend value. + * port_sdma_config User port SDMA config value. + * port_serial_control User port serial control value. + * *port_virt_to_phys () User function to cast virtual addr to CPU bus addr. + * *port_private User scratch pad for user specific data structures. + * + * This driver introduce a set of default values: + * PORT_CONFIG_VALUE Default port configuration value + * PORT_CONFIG_EXTEND_VALUE Default port extend configuration value + * PORT_SDMA_CONFIG_VALUE Default sdma control value + * PORT_SERIAL_CONTROL_VALUE Default port serial control value + * + * This driver data flow is done using the PKT_INFO struct which is + * a unified struct for Rx and Tx operations: + * byte_cnt Tx/Rx descriptor buffer byte count. + * l4i_chk CPU provided TCP Checksum. For Tx operation only. + * cmd_sts Tx/Rx descriptor command status. + * buf_ptr Tx/Rx descriptor buffer pointer. + * return_info Tx/Rx user resource return information. + * + * + * EXTERNAL SUPPORT REQUIREMENTS + * + * This driver requires the following external support: + * + * D_CACHE_FLUSH_LINE (address, address offset) + * + * This macro applies assembly code to flush and invalidate cache + * line. + * address - address base. + * address offset - address offset + * + * + * CPU_PIPE_FLUSH + * + * This macro applies assembly code to flush the CPU pipeline. + * + *******************************************************************************/ +/* includes */ + +/* defines */ +/* SDMA command macros */ +#define ETH_ENABLE_TX_QUEUE(tx_queue, eth_port) \ + MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port), (1 << tx_queue)) + +#define ETH_DISABLE_TX_QUEUE(tx_queue, eth_port) \ + MV_REG_WRITE(MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG(eth_port),\ + (1 << (8 + tx_queue))) + +#define ETH_ENABLE_RX_QUEUE(rx_queue, eth_port) \ +MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << rx_queue)) + +#define ETH_DISABLE_RX_QUEUE(rx_queue, eth_port) \ +MV_REG_WRITE(MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG(eth_port), (1 << (8 + rx_queue))) + +#define CURR_RFD_GET(p_curr_desc, queue) \ + ((p_curr_desc) = p_eth_port_ctrl->p_rx_curr_desc_q[queue]) + +#define CURR_RFD_SET(p_curr_desc, queue) \ + (p_eth_port_ctrl->p_rx_curr_desc_q[queue] = (p_curr_desc)) + +#define USED_RFD_GET(p_used_desc, queue) \ + ((p_used_desc) = p_eth_port_ctrl->p_rx_used_desc_q[queue]) + +#define USED_RFD_SET(p_used_desc, queue)\ +(p_eth_port_ctrl->p_rx_used_desc_q[queue] = (p_used_desc)) + + +#define CURR_TFD_GET(p_curr_desc, queue) \ + ((p_curr_desc) = p_eth_port_ctrl->p_tx_curr_desc_q[queue]) + +#define CURR_TFD_SET(p_curr_desc, queue) \ + (p_eth_port_ctrl->p_tx_curr_desc_q[queue] = (p_curr_desc)) + +#define USED_TFD_GET(p_used_desc, queue) \ + ((p_used_desc) = p_eth_port_ctrl->p_tx_used_desc_q[queue]) + +#define USED_TFD_SET(p_used_desc, queue) \ + (p_eth_port_ctrl->p_tx_used_desc_q[queue] = (p_used_desc)) + +#define FIRST_TFD_GET(p_first_desc, queue) \ + ((p_first_desc) = p_eth_port_ctrl->p_tx_first_desc_q[queue]) + +#define FIRST_TFD_SET(p_first_desc, queue) \ + (p_eth_port_ctrl->p_tx_first_desc_q[queue] = (p_first_desc)) + + +/* Macros that save access to desc in order to find next desc pointer */ +#define RX_NEXT_DESC_PTR(p_rx_desc, queue) (ETH_RX_DESC*)(((((unsigned int)p_rx_desc - (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + RX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->rx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_rx_desc_area_base[queue]) + +#define TX_NEXT_DESC_PTR(p_tx_desc, queue) (ETH_TX_DESC*)(((((unsigned int)p_tx_desc - (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + TX_DESC_ALIGNED_SIZE) % p_eth_port_ctrl->tx_desc_area_size[queue]) + (unsigned int)p_eth_port_ctrl->p_tx_desc_area_base[queue]) + +#define LINK_UP_TIMEOUT 100000 +#define PHY_BUSY_TIMEOUT 10000000 + +/* locals */ + +/* PHY routines */ +static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr); +static int ethernet_phy_get (ETH_PORT eth_port_num); + +/* Ethernet Port routines */ +static void eth_set_access_control (ETH_PORT eth_port_num, + ETH_WIN_PARAM * param); +static bool eth_port_uc_addr (ETH_PORT eth_port_num, unsigned char uc_nibble, + ETH_QUEUE queue, int option); +#if 0 /* FIXME */ +static bool eth_port_smc_addr (ETH_PORT eth_port_num, + unsigned char mc_byte, + ETH_QUEUE queue, int option); +static bool eth_port_omc_addr (ETH_PORT eth_port_num, + unsigned char crc8, + ETH_QUEUE queue, int option); +#endif + +static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr, + int byte_count); + +void eth_dbg (ETH_PORT_INFO * p_eth_port_ctrl); + + +typedef enum _memory_bank { BANK0, BANK1, BANK2, BANK3 } MEMORY_BANK; +u32 mv_get_dram_bank_base_addr (MEMORY_BANK bank) +{ + u32 result = 0; + u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE); + + if (enable & (1 << bank)) + return 0; + if (bank == BANK0) + result = MV_REG_READ (MV64460_CS_0_BASE_ADDR); + if (bank == BANK1) + result = MV_REG_READ (MV64460_CS_1_BASE_ADDR); + if (bank == BANK2) + result = MV_REG_READ (MV64460_CS_2_BASE_ADDR); + if (bank == BANK3) + result = MV_REG_READ (MV64460_CS_3_BASE_ADDR); + result &= 0x0000ffff; + result = result << 16; + return result; +} + +u32 mv_get_dram_bank_size (MEMORY_BANK bank) +{ + u32 result = 0; + u32 enable = MV_REG_READ (MV64460_BASE_ADDR_ENABLE); + + if (enable & (1 << bank)) + return 0; + if (bank == BANK0) + result = MV_REG_READ (MV64460_CS_0_SIZE); + if (bank == BANK1) + result = MV_REG_READ (MV64460_CS_1_SIZE); + if (bank == BANK2) + result = MV_REG_READ (MV64460_CS_2_SIZE); + if (bank == BANK3) + result = MV_REG_READ (MV64460_CS_3_SIZE); + result += 1; + result &= 0x0000ffff; + result = result << 16; + return result; +} + +u32 mv_get_internal_sram_base (void) +{ + u32 result; + + result = MV_REG_READ (MV64460_INTEGRATED_SRAM_BASE_ADDR); + result &= 0x0000ffff; + result = result << 16; + return result; +} + +/******************************************************************************* +* eth_port_init - Initialize the Ethernet port driver +* +* DESCRIPTION: +* This function prepares the ethernet port to start its activity: +* 1) Completes the ethernet port driver struct initialization toward port +* start routine. +* 2) Resets the device to a quiescent state in case of warm reboot. +* 3) Enable SDMA access to all four DRAM banks as well as internal SRAM. +* 4) Clean MAC tables. The reset status of those tables is unknown. +* 5) Set PHY address. +* Note: Call this routine prior to eth_port_start routine and after setting +* user values in the user fields of Ethernet port control struct (i.e. +* port_phy_addr). +* +* INPUT: +* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct +* +* OUTPUT: +* See description. +* +* RETURN: +* None. +* +*******************************************************************************/ +static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl) +{ + int queue; + ETH_WIN_PARAM win_param; + + p_eth_port_ctrl->port_config = PORT_CONFIG_VALUE; + p_eth_port_ctrl->port_config_extend = PORT_CONFIG_EXTEND_VALUE; + p_eth_port_ctrl->port_sdma_config = PORT_SDMA_CONFIG_VALUE; + p_eth_port_ctrl->port_serial_control = PORT_SERIAL_CONTROL_VALUE; + + p_eth_port_ctrl->port_rx_queue_command = 0; + p_eth_port_ctrl->port_tx_queue_command = 0; + + /* Zero out SW structs */ + for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) { + CURR_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue); + USED_RFD_SET ((ETH_RX_DESC *) 0x00000000, queue); + p_eth_port_ctrl->rx_resource_err[queue] = false; + } + + for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) { + CURR_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue); + USED_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue); + FIRST_TFD_SET ((ETH_TX_DESC *) 0x00000000, queue); + p_eth_port_ctrl->tx_resource_err[queue] = false; + } + + eth_port_reset (p_eth_port_ctrl->port_num); + + /* Set access parameters for DRAM bank 0 */ + win_param.win = ETH_WIN0; /* Use Ethernet window 0 */ + win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ + win_param.attributes = EBAR_ATTR_DRAM_CS0; /* Enable DRAM bank */ +#ifndef CONFIG_NOT_COHERENT_CACHE + win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; +#endif + win_param.high_addr = 0; + /* Get bank base */ + win_param.base_addr = mv_get_dram_bank_base_addr (BANK0); + win_param.size = mv_get_dram_bank_size (BANK0); /* Get bank size */ + if (win_param.size == 0) + win_param.enable = 0; + else + win_param.enable = 1; /* Enable the access */ + win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ + + /* Set the access control for address window (EPAPR) READ & WRITE */ + eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); + + /* Set access parameters for DRAM bank 1 */ + win_param.win = ETH_WIN1; /* Use Ethernet window 1 */ + win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ + win_param.attributes = EBAR_ATTR_DRAM_CS1; /* Enable DRAM bank */ +#ifndef CONFIG_NOT_COHERENT_CACHE + win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; +#endif + win_param.high_addr = 0; + /* Get bank base */ + win_param.base_addr = mv_get_dram_bank_base_addr (BANK1); + win_param.size = mv_get_dram_bank_size (BANK1); /* Get bank size */ + if (win_param.size == 0) + win_param.enable = 0; + else + win_param.enable = 1; /* Enable the access */ + win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ + + /* Set the access control for address window (EPAPR) READ & WRITE */ + eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); + + /* Set access parameters for DRAM bank 2 */ + win_param.win = ETH_WIN2; /* Use Ethernet window 2 */ + win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ + win_param.attributes = EBAR_ATTR_DRAM_CS2; /* Enable DRAM bank */ +#ifndef CONFIG_NOT_COHERENT_CACHE + win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; +#endif + win_param.high_addr = 0; + /* Get bank base */ + win_param.base_addr = mv_get_dram_bank_base_addr (BANK2); + win_param.size = mv_get_dram_bank_size (BANK2); /* Get bank size */ + if (win_param.size == 0) + win_param.enable = 0; + else + win_param.enable = 1; /* Enable the access */ + win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ + + /* Set the access control for address window (EPAPR) READ & WRITE */ + eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); + + /* Set access parameters for DRAM bank 3 */ + win_param.win = ETH_WIN3; /* Use Ethernet window 3 */ + win_param.target = ETH_TARGET_DRAM; /* Window target - DDR */ + win_param.attributes = EBAR_ATTR_DRAM_CS3; /* Enable DRAM bank */ +#ifndef CONFIG_NOT_COHERENT_CACHE + win_param.attributes |= EBAR_ATTR_DRAM_CACHE_COHERENCY_WB; +#endif + win_param.high_addr = 0; + /* Get bank base */ + win_param.base_addr = mv_get_dram_bank_base_addr (BANK3); + win_param.size = mv_get_dram_bank_size (BANK3); /* Get bank size */ + if (win_param.size == 0) + win_param.enable = 0; + else + win_param.enable = 1; /* Enable the access */ + win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ + + /* Set the access control for address window (EPAPR) READ & WRITE */ + eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); + + /* Set access parameters for Internal SRAM */ + win_param.win = ETH_WIN4; /* Use Ethernet window 0 */ + win_param.target = EBAR_TARGET_CBS; /* Target - Internal SRAM */ + win_param.attributes = EBAR_ATTR_CBS_SRAM | EBAR_ATTR_CBS_SRAM_BLOCK0; + win_param.high_addr = 0; + win_param.base_addr = mv_get_internal_sram_base (); /* Get base addr */ + win_param.size = MV64460_INTERNAL_SRAM_SIZE; /* Get bank size */ + win_param.enable = 1; /* Enable the access */ + win_param.access_ctrl = EWIN_ACCESS_FULL; /* Enable full access */ + + /* Set the access control for address window (EPAPR) READ & WRITE */ + eth_set_access_control (p_eth_port_ctrl->port_num, &win_param); + + eth_port_init_mac_tables (p_eth_port_ctrl->port_num); + + ethernet_phy_set (p_eth_port_ctrl->port_num, + p_eth_port_ctrl->port_phy_addr); + + return; + +} + +/******************************************************************************* +* eth_port_start - Start the Ethernet port activity. +* +* DESCRIPTION: +* This routine prepares the Ethernet port for Rx and Tx activity: +* 1. Initialize Tx and Rx Current Descriptor Pointer for each queue that +* has been initialized a descriptor's ring (using ether_init_tx_desc_ring +* for Tx and ether_init_rx_desc_ring for Rx) +* 2. Initialize and enable the Ethernet configuration port by writing to +* the port's configuration and command registers. +* 3. Initialize and enable the SDMA by writing to the SDMA's +* configuration and command registers. +* After completing these steps, the ethernet port SDMA can starts to +* perform Rx and Tx activities. +* +* Note: Each Rx and Tx queue descriptor's list must be initialized prior +* to calling this function (use ether_init_tx_desc_ring for Tx queues and +* ether_init_rx_desc_ring for Rx queues). +* +* INPUT: +* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct +* +* OUTPUT: +* Ethernet port is ready to receive and transmit. +* +* RETURN: +* false if the port PHY is not up. +* true otherwise. +* +*******************************************************************************/ +static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl) +{ + int queue; + volatile ETH_TX_DESC *p_tx_curr_desc; + volatile ETH_RX_DESC *p_rx_curr_desc; + unsigned int phy_reg_data; + ETH_PORT eth_port_num = p_eth_port_ctrl->port_num; + + + /* Assignment of Tx CTRP of given queue */ + for (queue = 0; queue < MAX_TX_QUEUE_NUM; queue++) { + CURR_TFD_GET (p_tx_curr_desc, queue); + MV_REG_WRITE ((MV64460_ETH_TX_CURRENT_QUEUE_DESC_PTR_0 + (eth_port_num) + + (4 * queue)), + ((unsigned int) p_tx_curr_desc)); + + } + + /* Assignment of Rx CRDP of given queue */ + for (queue = 0; queue < MAX_RX_QUEUE_NUM; queue++) { + CURR_RFD_GET (p_rx_curr_desc, queue); + MV_REG_WRITE ((MV64460_ETH_RX_CURRENT_QUEUE_DESC_PTR_0 + (eth_port_num) + + (4 * queue)), + ((unsigned int) p_rx_curr_desc)); + + if (p_rx_curr_desc != NULL) + /* Add the assigned Ethernet address to the port's address table */ + eth_port_uc_addr_set (p_eth_port_ctrl->port_num, + p_eth_port_ctrl->port_mac_addr, + queue); + } + + /* Assign port configuration and command. */ + MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num), + p_eth_port_ctrl->port_config); + + MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num), + p_eth_port_ctrl->port_config_extend); + + MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num), + p_eth_port_ctrl->port_serial_control); + + MV_SET_REG_BITS (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num), + ETH_SERIAL_PORT_ENABLE); + + /* Assign port SDMA configuration */ + MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num), + p_eth_port_ctrl->port_sdma_config); + + MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_COUNT + (eth_port_num), 0x3fffffff); + MV_REG_WRITE (MV64460_ETH_TX_QUEUE_0_TOKEN_BUCKET_CONFIG + (eth_port_num), 0x03fffcff); + /* Turn off the port/queue bandwidth limitation */ + MV_REG_WRITE (MV64460_ETH_MAXIMUM_TRANSMIT_UNIT (eth_port_num), 0x0); + + /* Enable port Rx. */ + MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (eth_port_num), + p_eth_port_ctrl->port_rx_queue_command); + + /* Check if link is up */ + eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data); + + if (!(phy_reg_data & 0x20)) + return false; + + return true; +} + +/******************************************************************************* +* eth_port_uc_addr_set - This function Set the port Unicast address. +* +* DESCRIPTION: +* This function Set the port Ethernet MAC address. +* +* INPUT: +* ETH_PORT eth_port_num Port number. +* char * p_addr Address to be set +* ETH_QUEUE queue Rx queue number for this MAC address. +* +* OUTPUT: +* Set MAC address low and high registers. also calls eth_port_uc_addr() +* To set the unicast table with the proper information. +* +* RETURN: +* N/A. +* +*******************************************************************************/ +static void eth_port_uc_addr_set (ETH_PORT eth_port_num, + unsigned char *p_addr, ETH_QUEUE queue) +{ + unsigned int mac_h; + unsigned int mac_l; + + mac_l = (p_addr[4] << 8) | (p_addr[5]); + mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | + (p_addr[2] << 8) | (p_addr[3] << 0); + + MV_REG_WRITE (MV64460_ETH_MAC_ADDR_LOW (eth_port_num), mac_l); + MV_REG_WRITE (MV64460_ETH_MAC_ADDR_HIGH (eth_port_num), mac_h); + + /* Accept frames of this address */ + eth_port_uc_addr (eth_port_num, p_addr[5], queue, ACCEPT_MAC_ADDR); + + return; +} + +/******************************************************************************* +* eth_port_uc_addr - This function Set the port unicast address table +* +* DESCRIPTION: +* This function locates the proper entry in the Unicast table for the +* specified MAC nibble and sets its properties according to function +* parameters. +* +* INPUT: +* ETH_PORT eth_port_num Port number. +* unsigned char uc_nibble Unicast MAC Address last nibble. +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. +* +* OUTPUT: +* This function add/removes MAC addresses from the port unicast address +* table. +* +* RETURN: +* true is output succeeded. +* false if option parameter is invalid. +* +*******************************************************************************/ +static bool eth_port_uc_addr (ETH_PORT eth_port_num, + unsigned char uc_nibble, + ETH_QUEUE queue, int option) +{ + unsigned int unicast_reg; + unsigned int tbl_offset; + unsigned int reg_offset; + + /* Locate the Unicast table entry */ + uc_nibble = (0xf & uc_nibble); + tbl_offset = (uc_nibble / 4) * 4; /* Register offset from unicast table base */ + reg_offset = uc_nibble % 4; /* Entry offset within the above register */ + + switch (option) { + case REJECT_MAC_ADDR: + /* Clear accepts frame bit at specified unicast DA table entry */ + unicast_reg = + MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE + (eth_port_num) + + tbl_offset)); + + unicast_reg &= (0x0E << (8 * reg_offset)); + + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE + (eth_port_num) + + tbl_offset), unicast_reg); + break; + + case ACCEPT_MAC_ADDR: + /* Set accepts frame bit at unicast DA filter table entry */ + unicast_reg = + MV_REG_READ ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE + (eth_port_num) + + tbl_offset)); + + unicast_reg |= ((0x01 | queue) << (8 * reg_offset)); + + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE + (eth_port_num) + + tbl_offset), unicast_reg); + + break; + + default: + return false; + } + return true; +} + +#if 0 /* FIXME */ +/******************************************************************************* +* eth_port_mc_addr - Multicast address settings. +* +* DESCRIPTION: +* This API controls the MV device MAC multicast support. +* The MV device supports multicast using two tables: +* 1) Special Multicast Table for MAC addresses of the form +* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF). +* The MAC DA[7:0] bits are used as a pointer to the Special Multicast +* Table entries in the DA-Filter table. +* In this case, the function calls eth_port_smc_addr() routine to set the +* Special Multicast Table. +* 2) Other Multicast Table for multicast of another type. A CRC-8bit +* is used as an index to the Other Multicast Table entries in the +* DA-Filter table. +* In this case, the function calculates the CRC-8bit value and calls +* eth_port_omc_addr() routine to set the Other Multicast Table. +* INPUT: +* ETH_PORT eth_port_num Port number. +* unsigned char *p_addr Unicast MAC Address. +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. +* +* OUTPUT: +* See description. +* +* RETURN: +* true is output succeeded. +* false if add_address_table_entry( ) failed. +* +*******************************************************************************/ +static void eth_port_mc_addr (ETH_PORT eth_port_num, + unsigned char *p_addr, + ETH_QUEUE queue, int option) +{ + unsigned int mac_h; + unsigned int mac_l; + unsigned char crc_result = 0; + int mac_array[48]; + int crc[8]; + int i; + + + if ((p_addr[0] == 0x01) && + (p_addr[1] == 0x00) && + (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00)) + + eth_port_smc_addr (eth_port_num, p_addr[5], queue, option); + else { + /* Calculate CRC-8 out of the given address */ + mac_h = (p_addr[0] << 8) | (p_addr[1]); + mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) | + (p_addr[4] << 8) | (p_addr[5] << 0); + + for (i = 0; i < 32; i++) + mac_array[i] = (mac_l >> i) & 0x1; + for (i = 32; i < 48; i++) + mac_array[i] = (mac_h >> (i - 32)) & 0x1; + + + crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^ + mac_array[39] ^ mac_array[35] ^ mac_array[34] ^ + mac_array[31] ^ mac_array[30] ^ mac_array[28] ^ + mac_array[23] ^ mac_array[21] ^ mac_array[19] ^ + mac_array[18] ^ mac_array[16] ^ mac_array[14] ^ + mac_array[12] ^ mac_array[8] ^ mac_array[7] ^ + mac_array[6] ^ mac_array[0]; + + crc[1] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^ + mac_array[43] ^ mac_array[41] ^ mac_array[39] ^ + mac_array[36] ^ mac_array[34] ^ mac_array[32] ^ + mac_array[30] ^ mac_array[29] ^ mac_array[28] ^ + mac_array[24] ^ mac_array[23] ^ mac_array[22] ^ + mac_array[21] ^ mac_array[20] ^ mac_array[18] ^ + mac_array[17] ^ mac_array[16] ^ mac_array[15] ^ + mac_array[14] ^ mac_array[13] ^ mac_array[12] ^ + mac_array[9] ^ mac_array[6] ^ mac_array[1] ^ + mac_array[0]; + + crc[2] = mac_array[47] ^ mac_array[46] ^ mac_array[44] ^ + mac_array[43] ^ mac_array[42] ^ mac_array[39] ^ + mac_array[37] ^ mac_array[34] ^ mac_array[33] ^ + mac_array[29] ^ mac_array[28] ^ mac_array[25] ^ + mac_array[24] ^ mac_array[22] ^ mac_array[17] ^ + mac_array[15] ^ mac_array[13] ^ mac_array[12] ^ + mac_array[10] ^ mac_array[8] ^ mac_array[6] ^ + mac_array[2] ^ mac_array[1] ^ mac_array[0]; + + crc[3] = mac_array[47] ^ mac_array[45] ^ mac_array[44] ^ + mac_array[43] ^ mac_array[40] ^ mac_array[38] ^ + mac_array[35] ^ mac_array[34] ^ mac_array[30] ^ + mac_array[29] ^ mac_array[26] ^ mac_array[25] ^ + mac_array[23] ^ mac_array[18] ^ mac_array[16] ^ + mac_array[14] ^ mac_array[13] ^ mac_array[11] ^ + mac_array[9] ^ mac_array[7] ^ mac_array[3] ^ + mac_array[2] ^ mac_array[1]; + + crc[4] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^ + mac_array[41] ^ mac_array[39] ^ mac_array[36] ^ + mac_array[35] ^ mac_array[31] ^ mac_array[30] ^ + mac_array[27] ^ mac_array[26] ^ mac_array[24] ^ + mac_array[19] ^ mac_array[17] ^ mac_array[15] ^ + mac_array[14] ^ mac_array[12] ^ mac_array[10] ^ + mac_array[8] ^ mac_array[4] ^ mac_array[3] ^ + mac_array[2]; + + crc[5] = mac_array[47] ^ mac_array[46] ^ mac_array[45] ^ + mac_array[42] ^ mac_array[40] ^ mac_array[37] ^ + mac_array[36] ^ mac_array[32] ^ mac_array[31] ^ + mac_array[28] ^ mac_array[27] ^ mac_array[25] ^ + mac_array[20] ^ mac_array[18] ^ mac_array[16] ^ + mac_array[15] ^ mac_array[13] ^ mac_array[11] ^ + mac_array[9] ^ mac_array[5] ^ mac_array[4] ^ + mac_array[3]; + + crc[6] = mac_array[47] ^ mac_array[46] ^ mac_array[43] ^ + mac_array[41] ^ mac_array[38] ^ mac_array[37] ^ + mac_array[33] ^ mac_array[32] ^ mac_array[29] ^ + mac_array[28] ^ mac_array[26] ^ mac_array[21] ^ + mac_array[19] ^ mac_array[17] ^ mac_array[16] ^ + mac_array[14] ^ mac_array[12] ^ mac_array[10] ^ + mac_array[6] ^ mac_array[5] ^ mac_array[4]; + + crc[7] = mac_array[47] ^ mac_array[44] ^ mac_array[42] ^ + mac_array[39] ^ mac_array[38] ^ mac_array[34] ^ + mac_array[33] ^ mac_array[30] ^ mac_array[29] ^ + mac_array[27] ^ mac_array[22] ^ mac_array[20] ^ + mac_array[18] ^ mac_array[17] ^ mac_array[15] ^ + mac_array[13] ^ mac_array[11] ^ mac_array[7] ^ + mac_array[6] ^ mac_array[5]; + + for (i = 0; i < 8; i++) + crc_result = crc_result | (crc[i] << i); + + eth_port_omc_addr (eth_port_num, crc_result, queue, option); + } + return; +} + +/******************************************************************************* +* eth_port_smc_addr - Special Multicast address settings. +* +* DESCRIPTION: +* This routine controls the MV device special MAC multicast support. +* The Special Multicast Table for MAC addresses supports MAC of the form +* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_fF). +* The MAC DA[7:0] bits are used as a pointer to the Special Multicast +* Table entries in the DA-Filter table. +* This function set the Special Multicast Table appropriate entry +* according to the argument given. +* +* INPUT: +* ETH_PORT eth_port_num Port number. +* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits). +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. +* +* OUTPUT: +* See description. +* +* RETURN: +* true is output succeeded. +* false if option parameter is invalid. +* +*******************************************************************************/ +static bool eth_port_smc_addr (ETH_PORT eth_port_num, + unsigned char mc_byte, + ETH_QUEUE queue, int option) +{ + unsigned int smc_table_reg; + unsigned int tbl_offset; + unsigned int reg_offset; + + /* Locate the SMC table entry */ + tbl_offset = (mc_byte / 4) * 4; /* Register offset from SMC table base */ + reg_offset = mc_byte % 4; /* Entry offset within the above register */ + queue &= 0x7; + + switch (option) { + case REJECT_MAC_ADDR: + /* Clear accepts frame bit at specified Special DA table entry */ + smc_table_reg = + MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); + smc_table_reg &= (0x0E << (8 * reg_offset)); + + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg); + break; + + case ACCEPT_MAC_ADDR: + /* Set accepts frame bit at specified Special DA table entry */ + smc_table_reg = + MV_REG_READ ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); + smc_table_reg |= ((0x01 | queue) << (8 * reg_offset)); + + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), smc_table_reg); + break; + + default: + return false; + } + return true; +} + +/******************************************************************************* +* eth_port_omc_addr - Multicast address settings. +* +* DESCRIPTION: +* This routine controls the MV device Other MAC multicast support. +* The Other Multicast Table is used for multicast of another type. +* A CRC-8bit is used as an index to the Other Multicast Table entries +* in the DA-Filter table. +* The function gets the CRC-8bit value from the calling routine and +* set the Other Multicast Table appropriate entry according to the +* CRC-8 argument given. +* +* INPUT: +* ETH_PORT eth_port_num Port number. +* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1). +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. +* +* OUTPUT: +* See description. +* +* RETURN: +* true is output succeeded. +* false if option parameter is invalid. +* +*******************************************************************************/ +static bool eth_port_omc_addr (ETH_PORT eth_port_num, + unsigned char crc8, + ETH_QUEUE queue, int option) +{ + unsigned int omc_table_reg; + unsigned int tbl_offset; + unsigned int reg_offset; + + /* Locate the OMC table entry */ + tbl_offset = (crc8 / 4) * 4; /* Register offset from OMC table base */ + reg_offset = crc8 % 4; /* Entry offset within the above register */ + queue &= 0x7; + + switch (option) { + case REJECT_MAC_ADDR: + /* Clear accepts frame bit at specified Other DA table entry */ + omc_table_reg = + MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); + omc_table_reg &= (0x0E << (8 * reg_offset)); + + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg); + break; + + case ACCEPT_MAC_ADDR: + /* Set accepts frame bit at specified Other DA table entry */ + omc_table_reg = + MV_REG_READ ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset)); + omc_table_reg |= ((0x01 | queue) << (8 * reg_offset)); + + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + tbl_offset), omc_table_reg); + break; + + default: + return false; + } + return true; +} +#endif + +/******************************************************************************* +* eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables +* +* DESCRIPTION: +* Go through all the DA filter tables (Unicast, Special Multicast & Other +* Multicast) and set each entry to 0. +* +* INPUT: +* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. +* +* OUTPUT: +* Multicast and Unicast packets are rejected. +* +* RETURN: +* None. +* +*******************************************************************************/ +static void eth_port_init_mac_tables (ETH_PORT eth_port_num) +{ + int table_index; + + /* Clear DA filter unicast table (Ex_dFUT) */ + for (table_index = 0; table_index <= 0xC; table_index += 4) + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_UNICAST_TABLE_BASE + (eth_port_num) + table_index), 0); + + for (table_index = 0; table_index <= 0xFC; table_index += 4) { + /* Clear DA filter special multicast table (Ex_dFSMT) */ + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0); + /* Clear DA filter other multicast table (Ex_dFOMT) */ + MV_REG_WRITE ((MV64460_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE (eth_port_num) + table_index), 0); + } +} + +/******************************************************************************* +* eth_clear_mib_counters - Clear all MIB counters +* +* DESCRIPTION: +* This function clears all MIB counters of a specific ethernet port. +* A read from the MIB counter will reset the counter. +* +* INPUT: +* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. +* +* OUTPUT: +* After reading all MIB counters, the counters resets. +* +* RETURN: +* MIB counter value. +* +*******************************************************************************/ +static void eth_clear_mib_counters (ETH_PORT eth_port_num) +{ + int i; + unsigned int dummy; + + /* Perform dummy reads from MIB counters */ + for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION; + i += 4) + dummy = MV_REG_READ ((MV64460_ETH_MIB_COUNTERS_BASE + (eth_port_num) + i)); + + return; +} + +/******************************************************************************* +* eth_read_mib_counter - Read a MIB counter +* +* DESCRIPTION: +* This function reads a MIB counter of a specific ethernet port. +* NOTE - If read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, then the +* following read must be from ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH +* register. The same applies for ETH_MIB_GOOD_OCTETS_SENT_LOW and +* ETH_MIB_GOOD_OCTETS_SENT_HIGH +* +* INPUT: +* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. +* unsigned int mib_offset MIB counter offset (use ETH_MIB_... macros). +* +* OUTPUT: +* After reading the MIB counter, the counter resets. +* +* RETURN: +* MIB counter value. +* +*******************************************************************************/ +unsigned int eth_read_mib_counter (ETH_PORT eth_port_num, + unsigned int mib_offset) +{ + return (MV_REG_READ (MV64460_ETH_MIB_COUNTERS_BASE (eth_port_num) + + mib_offset)); +} + +/******************************************************************************* +* ethernet_phy_set - Set the ethernet port PHY address. +* +* DESCRIPTION: +* This routine set the ethernet port PHY address according to given +* parameter. +* +* INPUT: +* ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. +* +* OUTPUT: +* Set PHY Address Register with given PHY address parameter. +* +* RETURN: +* None. +* +*******************************************************************************/ +static void ethernet_phy_set (ETH_PORT eth_port_num, int phy_addr) +{ + unsigned int reg_data; + + reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG); + + reg_data &= ~(0x1F << (5 * eth_port_num)); + reg_data |= (phy_addr << (5 * eth_port_num)); + + MV_REG_WRITE (MV64460_ETH_PHY_ADDR_REG, reg_data); + + return; +} + +/******************************************************************************* + * ethernet_phy_get - Get the ethernet port PHY address. + * + * DESCRIPTION: + * This routine returns the given ethernet port PHY address. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * + * OUTPUT: + * None. + * + * RETURN: + * PHY address. + * + *******************************************************************************/ +static int ethernet_phy_get (ETH_PORT eth_port_num) +{ + unsigned int reg_data; + + reg_data = MV_REG_READ (MV64460_ETH_PHY_ADDR_REG); + + return ((reg_data >> (5 * eth_port_num)) & 0x1f); +} + +/***********************************************************/ +/* (Re)start autonegotiation */ +/***********************************************************/ +int phy_setup_aneg (char *devname, unsigned char addr) +{ + unsigned short ctl, adv; + + /* Setup standard advertise */ + miiphy_read (devname, addr, PHY_ANAR, &adv); + adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_RF | PHY_ANLPAR_T4 | + PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD | + PHY_ANLPAR_10); + miiphy_write (devname, addr, PHY_ANAR, adv); + + miiphy_read (devname, addr, PHY_1000BTCR, &adv); + adv |= (0x0300); + miiphy_write (devname, addr, PHY_1000BTCR, adv); + + /* Start/Restart aneg */ + miiphy_read (devname, addr, PHY_BMCR, &ctl); + ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); + miiphy_write (devname, addr, PHY_BMCR, ctl); + + return 0; +} + +/******************************************************************************* + * ethernet_phy_reset - Reset Ethernet port PHY. + * + * DESCRIPTION: + * This routine utilize the SMI interface to reset the ethernet port PHY. + * The routine waits until the link is up again or link up is timeout. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * + * OUTPUT: + * The ethernet port PHY renew its link. + * + * RETURN: + * None. + * + *******************************************************************************/ +static bool ethernet_phy_reset (ETH_PORT eth_port_num) +{ + unsigned int time_out = 50; + unsigned int phy_reg_data; + + eth_port_read_smi_reg (eth_port_num, 20, &phy_reg_data); + phy_reg_data |= 0x0083; /* Set bit 7 to 1 for different RGMII timing */ + eth_port_write_smi_reg (eth_port_num, 20, phy_reg_data); + + /* Reset the PHY */ + eth_port_read_smi_reg (eth_port_num, 0, &phy_reg_data); + phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */ + eth_port_write_smi_reg (eth_port_num, 0, phy_reg_data); + + /* Poll on the PHY LINK */ + do { + eth_port_read_smi_reg (eth_port_num, 1, &phy_reg_data); + + if (time_out-- == 0) + return false; + } + while (!(phy_reg_data & 0x20)); + + return true; +} + +/******************************************************************************* + * eth_port_reset - Reset Ethernet port + * + * DESCRIPTION: + * This routine resets the chip by aborting any SDMA engine activity and + * clearing the MIB counters. The Receiver and the Transmit unit are in + * idle state after this command is performed and the port is disabled. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * + * OUTPUT: + * Channel activity is halted. + * + * RETURN: + * None. + * + *******************************************************************************/ +static void eth_port_reset (ETH_PORT eth_port_num) +{ + unsigned int reg_data; + + /* Stop Tx port activity. Check port Tx activity. */ + reg_data = + MV_REG_READ (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG + (eth_port_num)); + + if (reg_data & 0xFF) { + /* Issue stop command for active channels only */ + MV_REG_WRITE (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG + (eth_port_num), (reg_data << 8)); + + /* Wait for all Tx activity to terminate. */ + do { + /* Check port cause register that all Tx queues are stopped */ + reg_data = + MV_REG_READ + (MV64460_ETH_TRANSMIT_QUEUE_COMMAND_REG + (eth_port_num)); + } + while (reg_data & 0xFF); + } + + /* Stop Rx port activity. Check port Rx activity. */ + reg_data = + MV_REG_READ (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG + (eth_port_num)); + + if (reg_data & 0xFF) { + /* Issue stop command for active channels only */ + MV_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG + (eth_port_num), (reg_data << 8)); + + /* Wait for all Rx activity to terminate. */ + do { + /* Check port cause register that all Rx queues are stopped */ + reg_data = + MV_REG_READ + (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG + (eth_port_num)); + } + while (reg_data & 0xFF); + } + + /* Clear all MIB counters */ + eth_clear_mib_counters (eth_port_num); + + /* Reset the Enable bit in the Configuration Register */ + reg_data = + MV_REG_READ (MV64460_ETH_PORT_SERIAL_CONTROL_REG + (eth_port_num)); + reg_data &= ~ETH_SERIAL_PORT_ENABLE; + MV_REG_WRITE (MV64460_ETH_PORT_SERIAL_CONTROL_REG (eth_port_num), + reg_data); + + return; +} + +#if 0 /* Not needed here */ +/******************************************************************************* + * ethernet_set_config_reg - Set specified bits in configuration register. + * + * DESCRIPTION: + * This function sets specified bits in the given ethernet + * configuration register. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * unsigned int value 32 bit value. + * + * OUTPUT: + * The set bits in the value parameter are set in the configuration + * register. + * + * RETURN: + * None. + * + *******************************************************************************/ +static void ethernet_set_config_reg (ETH_PORT eth_port_num, + unsigned int value) +{ + unsigned int eth_config_reg; + + eth_config_reg = + MV_REG_READ (MV64460_ETH_PORT_CONFIG_REG (eth_port_num)); + eth_config_reg |= value; + MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_REG (eth_port_num), + eth_config_reg); + + return; +} +#endif + +#if 0 /* FIXME */ +/******************************************************************************* + * ethernet_reset_config_reg - Reset specified bits in configuration register. + * + * DESCRIPTION: + * This function resets specified bits in the given Ethernet + * configuration register. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * unsigned int value 32 bit value. + * + * OUTPUT: + * The set bits in the value parameter are reset in the configuration + * register. + * + * RETURN: + * None. + * + *******************************************************************************/ +static void ethernet_reset_config_reg (ETH_PORT eth_port_num, + unsigned int value) +{ + unsigned int eth_config_reg; + + eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG + (eth_port_num)); + eth_config_reg &= ~value; + MV_REG_WRITE (MV64460_ETH_PORT_CONFIG_EXTEND_REG (eth_port_num), + eth_config_reg); + + return; +} +#endif + +#if 0 /* Not needed here */ +/******************************************************************************* + * ethernet_get_config_reg - Get the port configuration register + * + * DESCRIPTION: + * This function returns the configuration register value of the given + * ethernet port. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * + * OUTPUT: + * None. + * + * RETURN: + * Port configuration register value. + * + *******************************************************************************/ +static unsigned int ethernet_get_config_reg (ETH_PORT eth_port_num) +{ + unsigned int eth_config_reg; + + eth_config_reg = MV_REG_READ (MV64460_ETH_PORT_CONFIG_EXTEND_REG + (eth_port_num)); + return eth_config_reg; +} + +#endif + +/******************************************************************************* + * eth_port_read_smi_reg - Read PHY registers + * + * DESCRIPTION: + * This routine utilize the SMI interface to interact with the PHY in + * order to perform PHY register read. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * unsigned int phy_reg PHY register address offset. + * unsigned int *value Register value buffer. + * + * OUTPUT: + * Write the value of a specified PHY register into given buffer. + * + * RETURN: + * false if the PHY is busy or read data is not in valid state. + * true otherwise. + * + *******************************************************************************/ +static bool eth_port_read_smi_reg (ETH_PORT eth_port_num, + unsigned int phy_reg, unsigned int *value) +{ + unsigned int reg_value; + unsigned int time_out = PHY_BUSY_TIMEOUT; + int phy_addr; + + phy_addr = ethernet_phy_get (eth_port_num); + + /* first check that it is not busy */ + do { + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + if (time_out-- == 0) { + return false; + } + } + while (reg_value & ETH_SMI_BUSY); + + /* not busy */ + + MV_REG_WRITE (MV64460_ETH_SMI_REG, + (phy_addr << 16) | (phy_reg << 21) | + ETH_SMI_OPCODE_READ); + + time_out = PHY_BUSY_TIMEOUT; /* initialize the time out var again */ + + do { + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + if (time_out-- == 0) { + return false; + } + } + while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */ + + /* Wait for the data to update in the SMI register */ +#define PHY_UPDATE_TIMEOUT 10000 + for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++); + + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + + *value = reg_value & 0xffff; + + return true; +} + +int mv_miiphy_read(char *devname, unsigned char phy_addr, + unsigned char phy_reg, unsigned short *value) +{ + unsigned int reg_value; + unsigned int time_out = PHY_BUSY_TIMEOUT; + + /* first check that it is not busy */ + do { + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + if (time_out-- == 0) { + return false; + } + } + while (reg_value & ETH_SMI_BUSY); + + /* not busy */ + MV_REG_WRITE (MV64460_ETH_SMI_REG, + (phy_addr << 16) | (phy_reg << 21) | + ETH_SMI_OPCODE_READ); + + time_out = PHY_BUSY_TIMEOUT; /* initialize the time out var again */ + + do { + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + if (time_out-- == 0) { + return false; + } + } + while ((reg_value & ETH_SMI_READ_VALID) != ETH_SMI_READ_VALID); /* Bit set equ operation done */ + + /* Wait for the data to update in the SMI register */ + for (time_out = 0; time_out < PHY_UPDATE_TIMEOUT; time_out++); + + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + + *value = reg_value & 0xffff; + + return 0; +} + +/******************************************************************************* + * eth_port_write_smi_reg - Write to PHY registers + * + * DESCRIPTION: + * This routine utilize the SMI interface to interact with the PHY in + * order to perform writes to PHY registers. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * unsigned int phy_reg PHY register address offset. + * unsigned int value Register value. + * + * OUTPUT: + * Write the given value to the specified PHY register. + * + * RETURN: + * false if the PHY is busy. + * true otherwise. + * + *******************************************************************************/ +static bool eth_port_write_smi_reg (ETH_PORT eth_port_num, + unsigned int phy_reg, unsigned int value) +{ + unsigned int reg_value; + unsigned int time_out = PHY_BUSY_TIMEOUT; + int phy_addr; + + phy_addr = ethernet_phy_get (eth_port_num); + + /* first check that it is not busy */ + do { + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + if (time_out-- == 0) { + return false; + } + } + while (reg_value & ETH_SMI_BUSY); + + /* not busy */ + MV_REG_WRITE (MV64460_ETH_SMI_REG, + (phy_addr << 16) | (phy_reg << 21) | + ETH_SMI_OPCODE_WRITE | (value & 0xffff)); + return true; +} + +int mv_miiphy_write(char *devname, unsigned char phy_addr, + unsigned char phy_reg, unsigned short value) +{ + unsigned int reg_value; + unsigned int time_out = PHY_BUSY_TIMEOUT; + + /* first check that it is not busy */ + do { + reg_value = MV_REG_READ (MV64460_ETH_SMI_REG); + if (time_out-- == 0) { + return false; + } + } + while (reg_value & ETH_SMI_BUSY); + + /* not busy */ + MV_REG_WRITE (MV64460_ETH_SMI_REG, + (phy_addr << 16) | (phy_reg << 21) | + ETH_SMI_OPCODE_WRITE | (value & 0xffff)); + return 0; +} + +/******************************************************************************* + * eth_set_access_control - Config address decode parameters for Ethernet unit + * + * DESCRIPTION: + * This function configures the address decode parameters for the Gigabit + * Ethernet Controller according the given parameters struct. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet Port number. See ETH_PORT enum. + * ETH_WIN_PARAM *param Address decode parameter struct. + * + * OUTPUT: + * An access window is opened using the given access parameters. + * + * RETURN: + * None. + * + *******************************************************************************/ +static void eth_set_access_control (ETH_PORT eth_port_num, + ETH_WIN_PARAM * param) +{ + unsigned int access_prot_reg; + + /* Set access control register */ + access_prot_reg = MV_REG_READ (MV64460_ETH_ACCESS_PROTECTION_REG + (eth_port_num)); + access_prot_reg &= (~(3 << (param->win * 2))); /* clear window permission */ + access_prot_reg |= (param->access_ctrl << (param->win * 2)); + MV_REG_WRITE (MV64460_ETH_ACCESS_PROTECTION_REG (eth_port_num), + access_prot_reg); + + /* Set window Size reg (SR) */ + MV_REG_WRITE ((MV64460_ETH_SIZE_REG_0 + + (ETH_SIZE_REG_GAP * param->win)), + (((param->size / 0x10000) - 1) << 16)); + + /* Set window Base address reg (BA) */ + MV_REG_WRITE ((MV64460_ETH_BAR_0 + (ETH_BAR_GAP * param->win)), + (param->target | param->attributes | param->base_addr)); + /* High address remap reg (HARR) */ + if (param->win < 4) + MV_REG_WRITE ((MV64460_ETH_HIGH_ADDR_REMAP_REG_0 + + (ETH_HIGH_ADDR_REMAP_REG_GAP * param->win)), + param->high_addr); + + /* Base address enable reg (BARER) */ + if (param->enable == 1) + MV_RESET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG, + (1 << param->win)); + else + MV_SET_REG_BITS (MV64460_ETH_BASE_ADDR_ENABLE_REG, + (1 << param->win)); +} + +/******************************************************************************* + * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory. + * + * DESCRIPTION: + * This function prepares a Rx chained list of descriptors and packet + * buffers in a form of a ring. The routine must be called after port + * initialization routine and before port start routine. + * The Ethernet SDMA engine uses CPU bus addresses to access the various + * devices in the system (i.e. DRAM). This function uses the ethernet + * struct 'virtual to physical' routine (set by the user) to set the ring + * with physical addresses. + * + * INPUT: + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE rx_queue Number of Rx queue. + * int rx_desc_num Number of Rx descriptors + * int rx_buff_size Size of Rx buffer + * unsigned int rx_desc_base_addr Rx descriptors memory area base addr. + * unsigned int rx_buff_base_addr Rx buffer memory area base addr. + * + * OUTPUT: + * The routine updates the Ethernet port control struct with information + * regarding the Rx descriptors and buffers. + * + * RETURN: + * false if the given descriptors memory area is not aligned according to + * Ethernet SDMA specifications. + * true otherwise. + * + *******************************************************************************/ +static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, + ETH_QUEUE rx_queue, + int rx_desc_num, + int rx_buff_size, + unsigned int rx_desc_base_addr, + unsigned int rx_buff_base_addr) +{ + ETH_RX_DESC *p_rx_desc; + ETH_RX_DESC *p_rx_prev_desc; /* pointer to link with the last descriptor */ + unsigned int buffer_addr; + int ix; /* a counter */ + + + p_rx_desc = (ETH_RX_DESC *) rx_desc_base_addr; + p_rx_prev_desc = p_rx_desc; + buffer_addr = rx_buff_base_addr; + + /* Rx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */ + if (rx_buff_base_addr & 0xF) + return false; + + /* Rx buffers are limited to 64K bytes and Minimum size is 8 bytes */ + if ((rx_buff_size < 8) || (rx_buff_size > RX_BUFFER_MAX_SIZE)) + return false; + + /* Rx buffers must be 64-bit aligned. */ + if ((rx_buff_base_addr + rx_buff_size) & 0x7) + return false; + + /* initialize the Rx descriptors ring */ + for (ix = 0; ix < rx_desc_num; ix++) { + p_rx_desc->buf_size = rx_buff_size; + p_rx_desc->byte_cnt = 0x0000; + p_rx_desc->cmd_sts = + ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT; + p_rx_desc->next_desc_ptr = + ((unsigned int) p_rx_desc) + RX_DESC_ALIGNED_SIZE; + p_rx_desc->buf_ptr = buffer_addr; + p_rx_desc->return_info = 0x00000000; + D_CACHE_FLUSH_LINE (p_rx_desc, 0); + buffer_addr += rx_buff_size; + p_rx_prev_desc = p_rx_desc; + p_rx_desc = (ETH_RX_DESC *) + ((unsigned int) p_rx_desc + RX_DESC_ALIGNED_SIZE); + } + + /* Closing Rx descriptors ring */ + p_rx_prev_desc->next_desc_ptr = (rx_desc_base_addr); + D_CACHE_FLUSH_LINE (p_rx_prev_desc, 0); + + /* Save Rx desc pointer to driver struct. */ + CURR_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue); + USED_RFD_SET ((ETH_RX_DESC *) rx_desc_base_addr, rx_queue); + + p_eth_port_ctrl->p_rx_desc_area_base[rx_queue] = + (ETH_RX_DESC *) rx_desc_base_addr; + p_eth_port_ctrl->rx_desc_area_size[rx_queue] = + rx_desc_num * RX_DESC_ALIGNED_SIZE; + + p_eth_port_ctrl->port_rx_queue_command |= (1 << rx_queue); + + return true; +} + +/******************************************************************************* + * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory. + * + * DESCRIPTION: + * This function prepares a Tx chained list of descriptors and packet + * buffers in a form of a ring. The routine must be called after port + * initialization routine and before port start routine. + * The Ethernet SDMA engine uses CPU bus addresses to access the various + * devices in the system (i.e. DRAM). This function uses the ethernet + * struct 'virtual to physical' routine (set by the user) to set the ring + * with physical addresses. + * + * INPUT: + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE tx_queue Number of Tx queue. + * int tx_desc_num Number of Tx descriptors + * int tx_buff_size Size of Tx buffer + * unsigned int tx_desc_base_addr Tx descriptors memory area base addr. + * unsigned int tx_buff_base_addr Tx buffer memory area base addr. + * + * OUTPUT: + * The routine updates the Ethernet port control struct with information + * regarding the Tx descriptors and buffers. + * + * RETURN: + * false if the given descriptors memory area is not aligned according to + * Ethernet SDMA specifications. + * true otherwise. + * + *******************************************************************************/ +static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, + ETH_QUEUE tx_queue, + int tx_desc_num, + int tx_buff_size, + unsigned int tx_desc_base_addr, + unsigned int tx_buff_base_addr) +{ + + ETH_TX_DESC *p_tx_desc; + ETH_TX_DESC *p_tx_prev_desc; + unsigned int buffer_addr; + int ix; /* a counter */ + + + /* save the first desc pointer to link with the last descriptor */ + p_tx_desc = (ETH_TX_DESC *) tx_desc_base_addr; + p_tx_prev_desc = p_tx_desc; + buffer_addr = tx_buff_base_addr; + + /* Tx desc Must be 4LW aligned (i.e. Descriptor_Address[3:0]=0000). */ + if (tx_buff_base_addr & 0xF) + return false; + + /* Tx buffers are limited to 64K bytes and Minimum size is 8 bytes */ + if ((tx_buff_size > TX_BUFFER_MAX_SIZE) + || (tx_buff_size < TX_BUFFER_MIN_SIZE)) + return false; + + /* Initialize the Tx descriptors ring */ + for (ix = 0; ix < tx_desc_num; ix++) { + p_tx_desc->byte_cnt = 0x0000; + p_tx_desc->l4i_chk = 0x0000; + p_tx_desc->cmd_sts = 0x00000000; + p_tx_desc->next_desc_ptr = + ((unsigned int) p_tx_desc) + TX_DESC_ALIGNED_SIZE; + + p_tx_desc->buf_ptr = buffer_addr; + p_tx_desc->return_info = 0x00000000; + D_CACHE_FLUSH_LINE (p_tx_desc, 0); + buffer_addr += tx_buff_size; + p_tx_prev_desc = p_tx_desc; + p_tx_desc = (ETH_TX_DESC *) + ((unsigned int) p_tx_desc + TX_DESC_ALIGNED_SIZE); + + } + /* Closing Tx descriptors ring */ + p_tx_prev_desc->next_desc_ptr = tx_desc_base_addr; + D_CACHE_FLUSH_LINE (p_tx_prev_desc, 0); + /* Set Tx desc pointer in driver struct. */ + CURR_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue); + USED_TFD_SET ((ETH_TX_DESC *) tx_desc_base_addr, tx_queue); + + /* Init Tx ring base and size parameters */ + p_eth_port_ctrl->p_tx_desc_area_base[tx_queue] = + (ETH_TX_DESC *) tx_desc_base_addr; + p_eth_port_ctrl->tx_desc_area_size[tx_queue] = + (tx_desc_num * TX_DESC_ALIGNED_SIZE); + + /* Add the queue to the list of Tx queues of this port */ + p_eth_port_ctrl->port_tx_queue_command |= (1 << tx_queue); + + return true; +} + +/******************************************************************************* + * eth_port_send - Send an Ethernet packet + * + * DESCRIPTION: + * This routine send a given packet described by p_pktinfo parameter. It + * supports transmitting of a packet spaned over multiple buffers. The + * routine updates 'curr' and 'first' indexes according to the packet + * segment passed to the routine. In case the packet segment is first, + * the 'first' index is update. In any case, the 'curr' index is updated. + * If the routine get into Tx resource error it assigns 'curr' index as + * 'first'. This way the function can abort Tx process of multiple + * descriptors per packet. + * + * INPUT: + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE tx_queue Number of Tx queue. + * PKT_INFO *p_pkt_info User packet buffer. + * + * OUTPUT: + * Tx ring 'curr' and 'first' indexes are updated. + * + * RETURN: + * ETH_QUEUE_FULL in case of Tx resource error. + * ETH_ERROR in case the routine can not access Tx desc ring. + * ETH_QUEUE_LAST_RESOURCE if the routine uses the last Tx resource. + * ETH_OK otherwise. + * + *******************************************************************************/ +static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl, + ETH_QUEUE tx_queue, + PKT_INFO * p_pkt_info) +{ + volatile ETH_TX_DESC *p_tx_desc_first; + volatile ETH_TX_DESC *p_tx_desc_curr; + volatile ETH_TX_DESC *p_tx_next_desc_curr; + volatile ETH_TX_DESC *p_tx_desc_used; + unsigned int command_status; + + /* Do not process Tx ring in case of Tx ring resource error */ + if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true) + return ETH_QUEUE_FULL; + + /* Get the Tx Desc ring indexes */ + CURR_TFD_GET (p_tx_desc_curr, tx_queue); + USED_TFD_GET (p_tx_desc_used, tx_queue); + + if (p_tx_desc_curr == NULL) + return ETH_ERROR; + + /* The following parameters are used to save readings from memory */ + p_tx_next_desc_curr = TX_NEXT_DESC_PTR (p_tx_desc_curr, tx_queue); + command_status = p_pkt_info->cmd_sts | ETH_ZERO_PADDING | ETH_GEN_CRC; + + if (command_status & (ETH_TX_FIRST_DESC)) { + /* Update first desc */ + FIRST_TFD_SET (p_tx_desc_curr, tx_queue); + p_tx_desc_first = p_tx_desc_curr; + } else { + FIRST_TFD_GET (p_tx_desc_first, tx_queue); + command_status |= ETH_BUFFER_OWNED_BY_DMA; + } + + /* Buffers with a payload smaller than 8 bytes must be aligned to 64-bit */ + /* boundary. We use the memory allocated for Tx descriptor. This memory */ + /* located in TX_BUF_OFFSET_IN_DESC offset within the Tx descriptor. */ + if (p_pkt_info->byte_cnt <= 8) { + printf ("You have failed in the < 8 bytes errata - fixme\n"); /* RABEEH - TBD */ + return ETH_ERROR; + + p_tx_desc_curr->buf_ptr = + (unsigned int) p_tx_desc_curr + TX_BUF_OFFSET_IN_DESC; + eth_b_copy (p_pkt_info->buf_ptr, p_tx_desc_curr->buf_ptr, + p_pkt_info->byte_cnt); + } else + p_tx_desc_curr->buf_ptr = p_pkt_info->buf_ptr; + + p_tx_desc_curr->byte_cnt = p_pkt_info->byte_cnt; + p_tx_desc_curr->return_info = p_pkt_info->return_info; + + if (p_pkt_info->cmd_sts & (ETH_TX_LAST_DESC)) { + /* Set last desc with DMA ownership and interrupt enable. */ + p_tx_desc_curr->cmd_sts = command_status | + ETH_BUFFER_OWNED_BY_DMA | ETH_TX_ENABLE_INTERRUPT; + + if (p_tx_desc_curr != p_tx_desc_first) + p_tx_desc_first->cmd_sts |= ETH_BUFFER_OWNED_BY_DMA; + + /* Flush CPU pipe */ + + D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0); + D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_first, 0); + CPU_PIPE_FLUSH; + + /* Apply send command */ + ETH_ENABLE_TX_QUEUE (tx_queue, p_eth_port_ctrl->port_num); + + /* Finish Tx packet. Update first desc in case of Tx resource error */ + p_tx_desc_first = p_tx_next_desc_curr; + FIRST_TFD_SET (p_tx_desc_first, tx_queue); + + } else { + p_tx_desc_curr->cmd_sts = command_status; + D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_curr, 0); + } + + /* Check for ring index overlap in the Tx desc ring */ + if (p_tx_next_desc_curr == p_tx_desc_used) { + /* Update the current descriptor */ + CURR_TFD_SET (p_tx_desc_first, tx_queue); + + p_eth_port_ctrl->tx_resource_err[tx_queue] = true; + return ETH_QUEUE_LAST_RESOURCE; + } else { + /* Update the current descriptor */ + CURR_TFD_SET (p_tx_next_desc_curr, tx_queue); + return ETH_OK; + } +} + +/******************************************************************************* + * eth_tx_return_desc - Free all used Tx descriptors + * + * DESCRIPTION: + * This routine returns the transmitted packet information to the caller. + * It uses the 'first' index to support Tx desc return in case a transmit + * of a packet spanned over multiple buffer still in process. + * In case the Tx queue was in "resource error" condition, where there are + * no available Tx resources, the function resets the resource error flag. + * + * INPUT: + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE tx_queue Number of Tx queue. + * PKT_INFO *p_pkt_info User packet buffer. + * + * OUTPUT: + * Tx ring 'first' and 'used' indexes are updated. + * + * RETURN: + * ETH_ERROR in case the routine can not access Tx desc ring. + * ETH_RETRY in case there is transmission in process. + * ETH_END_OF_JOB if the routine has nothing to release. + * ETH_OK otherwise. + * + *******************************************************************************/ +static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO * + p_eth_port_ctrl, + ETH_QUEUE tx_queue, + PKT_INFO * p_pkt_info) +{ + volatile ETH_TX_DESC *p_tx_desc_used = NULL; + volatile ETH_TX_DESC *p_tx_desc_first = NULL; + unsigned int command_status; + + + /* Get the Tx Desc ring indexes */ + USED_TFD_GET (p_tx_desc_used, tx_queue); + FIRST_TFD_GET (p_tx_desc_first, tx_queue); + + + /* Sanity check */ + if (p_tx_desc_used == NULL) + return ETH_ERROR; + + command_status = p_tx_desc_used->cmd_sts; + + /* Still transmitting... */ + if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) { + D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0); + return ETH_RETRY; + } + + /* Stop release. About to overlap the current available Tx descriptor */ + if ((p_tx_desc_used == p_tx_desc_first) && + (p_eth_port_ctrl->tx_resource_err[tx_queue] == false)) { + D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0); + return ETH_END_OF_JOB; + } + + /* Pass the packet information to the caller */ + p_pkt_info->cmd_sts = command_status; + p_pkt_info->return_info = p_tx_desc_used->return_info; + p_tx_desc_used->return_info = 0; + + /* Update the next descriptor to release. */ + USED_TFD_SET (TX_NEXT_DESC_PTR (p_tx_desc_used, tx_queue), tx_queue); + + /* Any Tx return cancels the Tx resource error status */ + if (p_eth_port_ctrl->tx_resource_err[tx_queue] == true) + p_eth_port_ctrl->tx_resource_err[tx_queue] = false; + + D_CACHE_FLUSH_LINE ((unsigned int) p_tx_desc_used, 0); + + return ETH_OK; + +} + +/******************************************************************************* + * eth_port_receive - Get received information from Rx ring. + * + * DESCRIPTION: + * This routine returns the received data to the caller. There is no + * data copying during routine operation. All information is returned + * using pointer to packet information struct passed from the caller. + * If the routine exhausts Rx ring resources then the resource error flag + * is set. + * + * INPUT: + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE rx_queue Number of Rx queue. + * PKT_INFO *p_pkt_info User packet buffer. + * + * OUTPUT: + * Rx ring current and used indexes are updated. + * + * RETURN: + * ETH_ERROR in case the routine can not access Rx desc ring. + * ETH_QUEUE_FULL if Rx ring resources are exhausted. + * ETH_END_OF_JOB if there is no received data. + * ETH_OK otherwise. + * + *******************************************************************************/ +static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl, + ETH_QUEUE rx_queue, + PKT_INFO * p_pkt_info) +{ + volatile ETH_RX_DESC *p_rx_curr_desc; + volatile ETH_RX_DESC *p_rx_next_curr_desc; + volatile ETH_RX_DESC *p_rx_used_desc; + unsigned int command_status; + + /* Do not process Rx ring in case of Rx ring resource error */ + if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) { + printf ("\nRx Queue is full ...\n"); + return ETH_QUEUE_FULL; + } + + /* Get the Rx Desc ring 'curr and 'used' indexes */ + CURR_RFD_GET (p_rx_curr_desc, rx_queue); + USED_RFD_GET (p_rx_used_desc, rx_queue); + + /* Sanity check */ + if (p_rx_curr_desc == NULL) + return ETH_ERROR; + + /* The following parameters are used to save readings from memory */ + p_rx_next_curr_desc = RX_NEXT_DESC_PTR (p_rx_curr_desc, rx_queue); + command_status = p_rx_curr_desc->cmd_sts; + + /* Nothing to receive... */ + if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) { +/* DP(printf("Rx: command_status: %08x\n", command_status)); */ + D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0); +/* DP(printf("\nETH_END_OF_JOB ...\n"));*/ + return ETH_END_OF_JOB; + } + + p_pkt_info->byte_cnt = (p_rx_curr_desc->byte_cnt) - RX_BUF_OFFSET; + p_pkt_info->cmd_sts = command_status; + p_pkt_info->buf_ptr = (p_rx_curr_desc->buf_ptr) + RX_BUF_OFFSET; + p_pkt_info->return_info = p_rx_curr_desc->return_info; + p_pkt_info->l4i_chk = p_rx_curr_desc->buf_size; /* IP fragment indicator */ + + /* Clean the return info field to indicate that the packet has been */ + /* moved to the upper layers */ + p_rx_curr_desc->return_info = 0; + + /* Update 'curr' in data structure */ + CURR_RFD_SET (p_rx_next_curr_desc, rx_queue); + + /* Rx descriptors resource exhausted. Set the Rx ring resource error flag */ + if (p_rx_next_curr_desc == p_rx_used_desc) + p_eth_port_ctrl->rx_resource_err[rx_queue] = true; + + D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0); + CPU_PIPE_FLUSH; + + return ETH_OK; +} + +/******************************************************************************* + * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring. + * + * DESCRIPTION: + * This routine returns a Rx buffer back to the Rx ring. It retrieves the + * next 'used' descriptor and attached the returned buffer to it. + * In case the Rx ring was in "resource error" condition, where there are + * no available Rx resources, the function resets the resource error flag. + * + * INPUT: + * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. + * ETH_QUEUE rx_queue Number of Rx queue. + * PKT_INFO *p_pkt_info Information on the returned buffer. + * + * OUTPUT: + * New available Rx resource in Rx descriptor ring. + * + * RETURN: + * ETH_ERROR in case the routine can not access Rx desc ring. + * ETH_OK otherwise. + * + *******************************************************************************/ +static ETH_FUNC_RET_STATUS eth_rx_return_buff (ETH_PORT_INFO * + p_eth_port_ctrl, + ETH_QUEUE rx_queue, + PKT_INFO * p_pkt_info) +{ + volatile ETH_RX_DESC *p_used_rx_desc; /* Where to return Rx resource */ + + /* Get 'used' Rx descriptor */ + USED_RFD_GET (p_used_rx_desc, rx_queue); + + /* Sanity check */ + if (p_used_rx_desc == NULL) + return ETH_ERROR; + + p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr; + p_used_rx_desc->return_info = p_pkt_info->return_info; + p_used_rx_desc->byte_cnt = p_pkt_info->byte_cnt; + p_used_rx_desc->buf_size = MV64460_RX_BUFFER_SIZE; /* Reset Buffer size */ + + /* Flush the write pipe */ + CPU_PIPE_FLUSH; + + /* Return the descriptor to DMA ownership */ + p_used_rx_desc->cmd_sts = + ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT; + + /* Flush descriptor and CPU pipe */ + D_CACHE_FLUSH_LINE ((unsigned int) p_used_rx_desc, 0); + CPU_PIPE_FLUSH; + + /* Move the used descriptor pointer to the next descriptor */ + USED_RFD_SET (RX_NEXT_DESC_PTR (p_used_rx_desc, rx_queue), rx_queue); + + /* Any Rx return cancels the Rx resource error status */ + if (p_eth_port_ctrl->rx_resource_err[rx_queue] == true) + p_eth_port_ctrl->rx_resource_err[rx_queue] = false; + + return ETH_OK; +} + +/******************************************************************************* + * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path + * + * DESCRIPTION: + * This routine sets the RX coalescing interrupt mechanism parameter. + * This parameter is a timeout counter, that counts in 64 t_clk + * chunks ; that when timeout event occurs a maskable interrupt + * occurs. + * The parameter is calculated using the tClk of the MV-643xx chip + * , and the required delay of the interrupt in usec. + * + * INPUT: + * ETH_PORT eth_port_num Ethernet port number + * unsigned int t_clk t_clk of the MV-643xx chip in HZ units + * unsigned int delay Delay in usec + * + * OUTPUT: + * Interrupt coalescing mechanism value is set in MV-643xx chip. + * + * RETURN: + * The interrupt coalescing value set in the gigE port. + * + *******************************************************************************/ +#if 0 /* FIXME */ +static unsigned int eth_port_set_rx_coal (ETH_PORT eth_port_num, + unsigned int t_clk, + unsigned int delay) +{ + unsigned int coal; + + coal = ((t_clk / 1000000) * delay) / 64; + /* Set RX Coalescing mechanism */ + MV_REG_WRITE (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num), + ((coal & 0x3fff) << 8) | + (MV_REG_READ + (MV64460_ETH_SDMA_CONFIG_REG (eth_port_num)) + & 0xffc000ff)); + return coal; +} + +#endif +/******************************************************************************* + * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path + * + * DESCRIPTION: + * This routine sets the TX coalescing interrupt mechanism parameter. + * This parameter is a timeout counter, that counts in 64 t_clk + * chunks ; that when timeout event occurs a maskable interrupt + * occurs. + * The parameter is calculated using the t_cLK frequency of the + * MV-643xx chip and the required delay in the interrupt in uSec + * + * INPUT: + * ETH_PORT eth_port_num Ethernet port number + * unsigned int t_clk t_clk of the MV-643xx chip in HZ units + * unsigned int delay Delay in uSeconds + * + * OUTPUT: + * Interrupt coalescing mechanism value is set in MV-643xx chip. + * + * RETURN: + * The interrupt coalescing value set in the gigE port. + * + *******************************************************************************/ +#if 0 /* FIXME */ +static unsigned int eth_port_set_tx_coal (ETH_PORT eth_port_num, + unsigned int t_clk, + unsigned int delay) +{ + unsigned int coal; + + coal = ((t_clk / 1000000) * delay) / 64; + /* Set TX Coalescing mechanism */ + MV_REG_WRITE (MV64460_ETH_TX_FIFO_URGENT_THRESHOLD_REG (eth_port_num), + coal << 4); + return coal; +} +#endif + +/******************************************************************************* + * eth_b_copy - Copy bytes from source to destination + * + * DESCRIPTION: + * This function supports the eight bytes limitation on Tx buffer size. + * The routine will zero eight bytes starting from the destination address + * followed by copying bytes from the source address to the destination. + * + * INPUT: + * unsigned int src_addr 32 bit source address. + * unsigned int dst_addr 32 bit destination address. + * int byte_count Number of bytes to copy. + * + * OUTPUT: + * See description. + * + * RETURN: + * None. + * + *******************************************************************************/ +static void eth_b_copy (unsigned int src_addr, unsigned int dst_addr, + int byte_count) +{ + /* Zero the dst_addr area */ + *(unsigned int *) dst_addr = 0x0; + + while (byte_count != 0) { + *(char *) dst_addr = *(char *) src_addr; + dst_addr++; + src_addr++; + byte_count--; + } +} |