diff options
Diffstat (limited to 'board/pm854/pm854.c')
| -rw-r--r-- | board/pm854/pm854.c | 296 | 
1 files changed, 296 insertions, 0 deletions
| diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c new file mode 100644 index 000000000..3eaf93e35 --- /dev/null +++ b/board/pm854/pm854.c @@ -0,0 +1,296 @@ + /* + * Copyright 2004 Freescale Semiconductor. + * (C) Copyright 2002,2003, Motorola Inc. + * Xianghua Xiao, (X.Xiao@motorola.com) + * + * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <common.h> +#include <pci.h> +#include <asm/processor.h> +#include <asm/immap_85xx.h> +#include <spd.h> + +#if defined(CONFIG_DDR_ECC) +extern void ddr_enable_ecc(unsigned int dram_size); +#endif + +extern long int spd_sdram(void); + +void local_bus_init(void); +void sdram_init(void); +long int fixed_sdram(void); + + +int board_early_init_f (void) +{ +#if defined(CONFIG_PCI) +    volatile immap_t *immr = (immap_t *)CFG_IMMR; +    volatile ccsr_pcix_t *pci = &immr->im_pcix; + +    pci->peer &= 0xffffffdf; /* disable master abort */ +#endif + +    return 0; +} + +int checkboard (void) +{ +	puts("Board: MicroSys PM854\n"); + +#ifdef CONFIG_PCI +	printf("    PCI1: 32 bit, %d MHz (compiled)\n", +	       CONFIG_SYS_CLK_FREQ / 1000000); +#else +	printf("    PCI1: disabled\n"); +#endif + +	/* +	 * Initialize local bus. +	 */ +	local_bus_init(); + +	return 0; +} + + +long int +initdram(int board_type) +{ +	long dram_size = 0; +	extern long spd_sdram (void); +	volatile immap_t *immap = (immap_t *)CFG_IMMR; + +	puts("Initializing\n"); + +#if defined(CONFIG_DDR_DLL) +	{ +	    volatile ccsr_gur_t *gur= &immap->im_gur; +	    int i,x; +	     +	    x = 10; +	     +	    /* +	     * Work around to stabilize DDR DLL +	     */ +	    gur->ddrdllcr = 0x81000000; +	    asm("sync;isync;msync"); +	    udelay (200); +	    while (gur->ddrdllcr != 0x81000100) +	    { +	    	gur->devdisr = gur->devdisr | 0x00010000; +		asm("sync;isync;msync"); +		for (i=0; i<x; i++) +		    ; +		gur->devdisr = gur->devdisr & 0xfff7ffff; +		asm("sync;isync;msync"); +		x++; +	    } +	}	 +#endif + +#if defined(CONFIG_SPD_EEPROM) +	dram_size = spd_sdram (); +#else +	dram_size = fixed_sdram (); +#endif + +#if defined(CONFIG_DDR_ECC) +	/* +	 * Initialize and enable DDR ECC. +	 */ +	ddr_enable_ecc(dram_size); +#endif +	puts("    DDR: "); +	return dram_size; +} + + +/* + * Initialize Local Bus + */ + +void +local_bus_init(void) +{ +	volatile immap_t *immap = (immap_t *)CFG_IMMR; +	volatile ccsr_gur_t *gur = &immap->im_gur; +	volatile ccsr_lbc_t *lbc = &immap->im_lbc; + +	uint clkdiv; +	uint lbc_hz; +	sys_info_t sysinfo; + +	/* +	 * Errata LBC11. +	 * Fix Local Bus clock glitch when DLL is enabled. +	 * +	 * If localbus freq is < 66Mhz, DLL bypass mode must be used. +	 * If localbus freq is > 133Mhz, DLL can be safely enabled. +	 * Between 66 and 133, the DLL is enabled with an override workaround. +	 */ + +	get_sys_info(&sysinfo); +	clkdiv = lbc->lcrr & 0x0f; +	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; + +	if (lbc_hz < 66) { +		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */ + +	} else if (lbc_hz >= 133) { +		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */ + +	} else { +		/* +		 * On REV1 boards, need to change CLKDIV before enable DLL. +		 * Default CLKDIV is 8, change it to 4 temporarily. +		 */ +		uint pvr = get_pvr(); +		uint temp_lbcdll = 0; + +		if (pvr == PVR_85xx_REV1) { +			/* FIXME: Justify the high bit here. */ +			lbc->lcrr = 0x10000004; +		} + +		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */ +		udelay(200); + +		/* +		 * Sample LBC DLL ctrl reg, upshift it to set the +		 * override bits. +		 */ +		temp_lbcdll = gur->lbcdllcr; +		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000); +		asm("sync;isync;msync"); +	} +} + + +#if defined(CFG_DRAM_TEST) +int testdram (void) +{ +	uint *pstart = (uint *) CFG_MEMTEST_START; +	uint *pend = (uint *) CFG_MEMTEST_END; +	uint *p; + +	printf("SDRAM test phase 1:\n"); +	for (p = pstart; p < pend; p++) +		*p = 0xaaaaaaaa; + +	for (p = pstart; p < pend; p++) { +		if (*p != 0xaaaaaaaa) { +			printf ("SDRAM test fails at: %08x\n", (uint) p); +			return 1; +		} +	} + +	printf("SDRAM test phase 2:\n"); +	for (p = pstart; p < pend; p++) +		*p = 0x55555555; + +	for (p = pstart; p < pend; p++) { +		if (*p != 0x55555555) { +			printf ("SDRAM test fails at: %08x\n", (uint) p); +			return 1; +		} +	} + +	printf("SDRAM test passed.\n"); +	return 0; +} +#endif + + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + *  fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +long int fixed_sdram (void) +{ +  #ifndef CFG_RAMBOOT +	volatile immap_t *immap = (immap_t *)CFG_IMMR; +	volatile ccsr_ddr_t *ddr= &immap->im_ddr; + +	ddr->cs0_bnds = CFG_DDR_CS0_BNDS; +	ddr->cs0_config = CFG_DDR_CS0_CONFIG; +	ddr->timing_cfg_1 = CFG_DDR_TIMING_1; +	ddr->timing_cfg_2 = CFG_DDR_TIMING_2; +	ddr->sdram_mode = CFG_DDR_MODE; +	ddr->sdram_interval = CFG_DDR_INTERVAL; +    #if defined (CONFIG_DDR_ECC) +	ddr->err_disable = 0x0000000D; +	ddr->err_sbe = 0x00ff0000; +    #endif +	asm("sync;isync;msync"); +	udelay(500); +    #if defined (CONFIG_DDR_ECC) +	/* Enable ECC checking */ +	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000); +    #else +	ddr->sdram_cfg = CFG_DDR_CONTROL; +    #endif +	asm("sync; isync; msync"); +	udelay(500); +  #endif +	return CFG_SDRAM_SIZE * 1024 * 1024; +} +#endif	/* !defined(CONFIG_SPD_EEPROM) */ + + +#if defined(CONFIG_PCI) +/* + * Initialize PCI Devices, report devices found. + */ + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_pm854_config_table[] = { +    { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, +      PCI_IDSEL_NUMBER, PCI_ANY_ID, +      pci_cfgfunc_config_device, { PCI_ENET0_IOADDR, +				   PCI_ENET0_MEMADDR, +				   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER +      } }, +    { } +}; +#endif + + +static struct pci_controller hose = { +#ifndef CONFIG_PCI_PNP +	config_table: pci_pm854_config_table, +#endif +}; + +#endif	/* CONFIG_PCI */ + + +void +pci_init_board(void) +{ +#ifdef CONFIG_PCI +	extern void pci_mpc85xx_init(struct pci_controller *hose); + +	pci_mpc85xx_init(&hose); +#endif /* CONFIG_PCI */ +} |