diff options
Diffstat (limited to 'board/olio')
| -rw-r--r-- | board/olio/h1/h1.c | 45 | ||||
| -rw-r--r-- | board/olio/h1/h1.h | 4 |
2 files changed, 0 insertions, 49 deletions
diff --git a/board/olio/h1/h1.c b/board/olio/h1/h1.c index e04aa817a..be5d43064 100644 --- a/board/olio/h1/h1.c +++ b/board/olio/h1/h1.c @@ -14,7 +14,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> -#include <twl4030.h> #include <linux/mtd/nand.h> #include <asm/io.h> #include <asm/arch/mux.h> @@ -26,8 +25,6 @@ #include "h1.h" #include <command.h> -#define TWL4030_I2C_BUS 0 - DECLARE_GLOBAL_DATA_PTR; /* @@ -79,36 +76,6 @@ void get_board_mem_timings(struct board_sdrc_timings *timings) } #endif -#ifdef CONFIG_VIDEO_OMAP3 -/* - * Configure DSS to display background color on DVID - * Configure VENC to display color bar on S-Video - */ -static void beagle_display_init(void) -{ - omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH); - omap3_dss_panel_config(&dvid_cfg_xm); -} - -/* - * Enable DVI power - */ -static void beagle_dvi_pup(void) -{ - uchar val; - #define GPIODATADIR1 (TWL4030_BASEADD_GPIO+3) - #define GPIODATAOUT1 (TWL4030_BASEADD_GPIO+6) - - i2c_read(TWL4030_CHIP_GPIO, GPIODATADIR1, 1, &val, 1); - val |= 4; - i2c_write(TWL4030_CHIP_GPIO, GPIODATADIR1, 1, &val, 1); - - i2c_read(TWL4030_CHIP_GPIO, GPIODATAOUT1, 1, &val, 1); - val |= 4; - i2c_write(TWL4030_CHIP_GPIO, GPIODATAOUT1, 1, &val, 1); -} -#endif - /* * Routine: misc_init_r * Description: Configure board specific parts @@ -122,17 +89,7 @@ int misc_init_r(void) /* Enable i2c2 pullup resisters */ writel(~(PRG_I2C2_PULLUPRESX), &prog_io_base->io1); printf("Olio H1\n"); - setenv("beaglerev", "xMC"); MUX_BEAGLE_XM(); - /* Set VAUX2 to 1.8V for EHCI PHY */ - twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, - TWL4030_PM_RECEIVER_VAUX2_VSEL_18, - TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, - TWL4030_PM_RECEIVER_DEV_GRP_P1); - - setenv("buddy", "none"); - - twl4030_power_init(); /* Set GPIO states before they are made outputs */ writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1, @@ -148,8 +105,6 @@ int misc_init_r(void) dieid_num_r(); #ifdef CONFIG_VIDEO_OMAP3 - beagle_dvi_pup(); - beagle_display_init(); omap3_dss_enable(); #endif diff --git a/board/olio/h1/h1.h b/board/olio/h1/h1.h index c12d0bc3b..ec0c24fb9 100644 --- a/board/olio/h1/h1.h +++ b/board/olio/h1/h1.h @@ -12,11 +12,7 @@ const omap3_sysinfo sysinfo = { DDR_STACKED, "OMAP3 Beagle board", -#if defined(CONFIG_ENV_IS_IN_ONENAND) - "OneNAND", -#else "NAND", -#endif }; /* |