diff options
Diffstat (limited to 'board/ml2/flash.c')
| -rw-r--r-- | board/ml2/flash.c | 300 | 
1 files changed, 0 insertions, 300 deletions
| diff --git a/board/ml2/flash.c b/board/ml2/flash.c deleted file mode 100644 index c125d418d..000000000 --- a/board/ml2/flash.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * flash.c: Support code for the flash chips on the Xilinx ML2 board - * - * Copyright 2002 Mind NV - * - * http://www.mind.be/ - * - * Author : Peter De Schrijver (p2@mind.be) - * - * This software may be used and distributed according to the terms of - * the GNU General Public License (GPL) version 2, incorporated herein by - * reference. Drivers based on or derived from this code fall under the GPL - * and must retain the authorship, copyright and this license notice. This - * file is not a complete program and may only be used when the entire program - * is licensed under the GPL. - * - */ - -#include <common.h> -#include <asm/u-boot.h> -#include <configs/ML2.h> - -#define FLASH_BANK_SIZE (64*1024*1024) - -flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -#define SECT_SIZE		(512*1024) - -#define CMD_READ_ARRAY	0x00FF00FF00FF00FULL -#define CMD_IDENTIFY        0x0090009000900090ULL -#define CMD_ERASE_SETUP     0x0020002000200020ULL -#define CMD_ERASE_CONFIRM   0x00D000D000D000D0ULL -#define CMD_PROGRAM     0x0040004000400040ULL -#define CMD_RESUME      0x00D000D000D000D0ULL -#define CMD_SUSPEND     0x00B000B000B000B0ULL -#define CMD_STATUS_READ     0x0070007000700070ULL -#define CMD_STATUS_RESET    0x0050005000500050ULL - -#define BIT_BUSY        0x0080008000800080ULL -#define BIT_ERASE_SUSPEND   0x004000400400040ULL -#define BIT_ERASE_ERROR     0x0020002000200020ULL -#define BIT_PROGRAM_ERROR   0x0010001000100010ULL -#define BIT_VPP_RANGE_ERROR 0x0008000800080008ULL -#define BIT_PROGRAM_SUSPEND 0x0004000400040004ULL -#define BIT_PROTECT_ERROR   0x0002000200020002ULL -#define BIT_UNDEFINED       0x0001000100010001ULL - -#define BIT_SEQUENCE_ERROR  0x0030003000300030ULL - -#define BIT_TIMEOUT     0x80000000 - - -inline void eieio(void) { - -	__asm__ __volatile__ ("eieio" : : : "memory"); - -} - -ulong flash_init(void) { - -	int i, j; -	ulong size = 0; - -	for(i=0;i<CONFIG_SYS_MAX_FLASH_BANKS;i++) { -		ulong flashbase = 0; - -		flash_info[i].flash_id = (INTEL_MANUFACT & FLASH_VENDMASK) | -								 (INTEL_ID_28F128J3A & FLASH_TYPEMASK); -		flash_info[i].size = FLASH_BANK_SIZE; -		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; -		memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); -		if (i==0) -			flashbase = CONFIG_SYS_FLASH_BASE; -		else -			panic("configured too many flash banks!\n"); -		for (j = 0; j < flash_info[i].sector_count; j++) -				flash_info[i].start[j]=flashbase + j * SECT_SIZE; - -		size += flash_info[i].size; -	} - -	return size; -} - -void flash_print_info  (flash_info_t *info) { - -	int i; - -	switch (info->flash_id & FLASH_VENDMASK) { -		case (INTEL_MANUFACT & FLASH_VENDMASK): -			printf("Intel: "); -			break; -		default: -			printf("Unknown Vendor "); -			break; -	} - -	switch (info->flash_id & FLASH_TYPEMASK) { -		case (INTEL_ID_28F128J3A & FLASH_TYPEMASK): -			printf("4x 28F128J3A (128Mbit)\n"); -			break; -		default: -			printf("Unknown Chip Type\n"); -			break; -	} - -	printf("  Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); -	printf("  Sector Start Addresses:"); -	for (i = 0; i < info->sector_count; i++) { -		if ((i % 5) == 0) -			printf("\n   "); -		printf (" %08lX%s", info->start[i], -				 info->protect[i] ? " (RO)" : "     "); -	} -	printf ("\n"); -} - -int flash_error (unsigned long long code) { - -	if (code & BIT_TIMEOUT) { -		printf ("Timeout\n"); -		return ERR_TIMOUT; -	} - -	if (~code & BIT_BUSY) { -		printf ("Busy\n"); -		return ERR_PROG_ERROR; -	} - -	if (code & BIT_VPP_RANGE_ERROR) { -		printf ("Vpp range error\n"); -		return ERR_PROG_ERROR; -	} - -	if (code & BIT_PROTECT_ERROR) { -		printf ("Device protect error\n"); -		return ERR_PROG_ERROR; -	} - -	if (code & BIT_SEQUENCE_ERROR) { -		printf ("Command seqence error\n"); -		return ERR_PROG_ERROR; -	} - -	if (code & BIT_ERASE_ERROR) { -		printf ("Block erase error\n"); -		return ERR_PROG_ERROR; -	} - -	if (code & BIT_PROGRAM_ERROR) { -		printf ("Program error\n"); -		return ERR_PROG_ERROR; -	} - -	if (code & BIT_ERASE_SUSPEND) { -		printf ("Block erase suspended\n"); -		return ERR_PROG_ERROR; -	} - -	if (code & BIT_PROGRAM_SUSPEND) { -		printf ("Program suspended\n"); -		return ERR_PROG_ERROR; -	} - -	return ERR_OK; - -} - -int flash_erase (flash_info_t *info, int s_first, int s_last) { - -	int rc = ERR_OK; -	int sect; -	unsigned long long result; - -	if (info->flash_id == FLASH_UNKNOWN) -		return ERR_UNKNOWN_FLASH_TYPE; - -	if ((s_first < 0) || (s_first > s_last)) -		return ERR_INVAL; - -	if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK)) -		return ERR_UNKNOWN_FLASH_VENDOR; - -	for (sect=s_first; sect<=s_last; ++sect) -		if (info->protect[sect]) -			return ERR_PROTECTED; - -	for (sect = s_first; sect<=s_last && !ctrlc(); sect++) { -		volatile unsigned long long *addr= -									(unsigned long long *)(info->start[sect]); - -		printf("Erasing sector %2d ... ", sect); - -		*addr=CMD_STATUS_RESET; -		eieio(); -		*addr=CMD_ERASE_SETUP; -		eieio(); -		*addr=CMD_ERASE_CONFIRM; -		eieio(); - -		do { -			result = *addr; -		} while(~result & BIT_BUSY); - -		*addr=CMD_READ_ARRAY; - -		if ((rc = flash_error(result)) == ERR_OK) -			printf("ok.\n"); -		else -			break; -	} - -	if (ctrlc()) -		printf("User Interrupt!\n"); - -	return rc; -} - -static int write_word (flash_info_t *info, ulong dest, unsigned long long data) { - -	volatile unsigned long long *addr=(unsigned long long *)dest; -	unsigned long long result; -	int rc = ERR_OK; - -	result = *addr; -	if ((result & data) != data) -		return ERR_NOT_ERASED; - -	*addr=CMD_STATUS_RESET; -	eieio(); -	*addr=CMD_PROGRAM; -	eieio(); -	*addr=data; -	eieio(); - -	do { -		result = *addr; -	} while(~result & BIT_BUSY); - -	*addr=CMD_READ_ARRAY; - -	rc = flash_error(result); - -	return rc; - -} - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) { - -	ulong cp, wp; -	unsigned long long data; -	int l; -	int i,rc; - -	wp=(addr & ~7); - -	if((l=addr-wp) != 0) { -		data=0; -		for(i=0,cp=wp;i<l;++i,++cp) -			data = (data >> 8) | (*(uchar *)cp << 24); - -		for (; i<8 && cnt>0; ++i) { -			data = (data >> 8) | (*src++ << 24); -			--cnt; -			++cp; -		} - -		for (; i<8; ++i, ++cp) -			data = (data >> 8) | (*(uchar *)cp << 24); - -		if ((rc = write_word(info, wp, data)) != 0) -			return rc; - -		wp+=8; -	} - -	while(cnt>=8) { -		data = *((unsigned long long *)src); -		if ((rc = write_word(info, wp, data)) != 0) -			return rc; -		src+=8; -		wp+=8; -		cnt-=8; -	} - -	if(cnt == 0) -		return ERR_OK; - -	data = 0; -	for (i=0, cp=wp; i<8 && cnt>0; ++i, ++cp) { -		data = (data >> 8) | (*src++ << 24); -		--cnt; -	} -	for (; i<8; ++i, ++cp) { -		data = (data >> 8) | (*(uchar *)cp << 24); -	} - -	return write_word(info, wp, data); - -} |