1 files changed, 114 insertions, 0 deletions
diff --git a/board/miromico/hammerhead/hammerhead.c b/board/miromico/hammerhead/hammerhead.c
new file mode 100644
index 000000000..738ece2fe
--- /dev/null
+++ b/board/miromico/hammerhead/hammerhead.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2008 Miromico AG
+ *
+ * Mostly copied form atmel ATNGW100 sources
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "../cpu/at32ap/at32ap700x/sm.h"
+
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/sdram.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/hmatrix.h>
+#include <asm/arch/memory-map.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct sdram_config sdram_config = {
+	.data_bits	= SDRAM_DATA_32BIT,
+	.row_bits	= 13,
+	.col_bits	= 9,
+	.bank_bits	= 2,
+	.cas		= 3,
+	.twr		= 2,
+	.trc		= 7,
+	.trp		= 2,
+	.trcd		= 2,
+	.tras		= 5,
+	.txsr		= 5,
+	/* 7.81 us */
+	.refresh_period	= (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
+};
+
+extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+	return macb_eth_initialize(0, (void *)MACB0_BASE, bis->bi_phy_id[0]);
+}
+#endif
+
+int board_early_init_f(void)
+{
+	/* Enable SDRAM in the EBI mux */
+	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
+
+	gpio_enable_ebi();
+	gpio_enable_usart1();
+
+#if defined(CONFIG_MACB)
+	gpio_enable_macb0();
+#endif
+#if defined(CONFIG_MMC)
+	gpio_enable_mmci();
+#endif
+	return 0;
+}
+
+phys_size_t initdram(int board_type)
+{
+	unsigned long expected_size;
+	unsigned long actual_size;
+	void *sdram_base;
+
+	sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+	expected_size = sdram_init(sdram_base, &sdram_config);
+	actual_size = get_ram_size(sdram_base, expected_size);
+
+	unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+	if (expected_size != actual_size)
+		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
+		       actual_size >> 20, expected_size >> 20);
+
+	return actual_size;
+}
+
+void board_init_info(void)
+{
+	gd->bd->bi_phy_id[0] = 0x01;
+}
+
+void gclk_init(void)
+{
+	/* Hammerhead boards uses GCLK3 as 25MHz output to ethernet PHY */
+
+	/* Select GCLK3 peripheral function */
+	gpio_select_periph_A(GPIO_PIN_PB29, 0);
+
+	/* Enable GCLK3 with no input divider, from OSC0 (crystal) */
+	sm_writel(PM_GCCTRL(3), SM_BIT(CEN));
+}