diff options
Diffstat (limited to 'board/lwmon5/lwmon5.c')
| -rw-r--r-- | board/lwmon5/lwmon5.c | 89 |
1 files changed, 79 insertions, 10 deletions
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index d91628475..830ec1911 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -45,16 +45,16 @@ int board_early_init_f(void) mtdcr(uic0sr, 0xffffffff); /* clear all. if write with 1 then the status is cleared */ mtdcr(uic0er, 0x00000000); /* disable all */ mtdcr(uic0cr, 0x00000000); /* we have not critical interrupts at the moment */ - mtdcr(uic0pr, 0xfffff7ff); /* Adjustment of the polarity */ - mtdcr(uic0tr, 0x00000810); /* per ref-board manual */ + mtdcr(uic0pr, 0xFFBFF1EF); /* Adjustment of the polarity */ + mtdcr(uic0tr, 0x00000900); /* per ref-board manual */ mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ mtdcr(uic0sr, 0xffffffff); /* clear all */ mtdcr(uic1sr, 0xffffffff); /* clear all */ mtdcr(uic1er, 0x00000000); /* disable all */ mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xFFFFC7AD); /* Adjustment of the polarity */ - mtdcr(uic1tr, 0x0600384A); /* per ref-board manual */ + mtdcr(uic1pr, 0xFFFFC6A5); /* Adjustment of the polarity */ + mtdcr(uic1tr, 0x60000040); /* per ref-board manual */ mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ mtdcr(uic1sr, 0xffffffff); /* clear all */ @@ -62,9 +62,9 @@ int board_early_init_f(void) mtdcr(uic2er, 0x00000000); /* disable all */ mtdcr(uic2cr, 0x00000000); /* all non-critical */ mtdcr(uic2pr, 0x27C00000); /* Adjustment of the polarity */ - mtdcr(uic2tr, 0xDFC00000); /* per ref-board manual */ + mtdcr(uic2tr, 0x3C000000); /* per ref-board manual */ mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ - mtdcr(uic2sr, 0xffffffff); /* clear all. Why this??? */ + mtdcr(uic2sr, 0xffffffff); /* clear all */ /* Trace Pins are disabled. SDR0_PFC0 Register */ mtsdr(SDR0_PFC0, 0x0); @@ -158,13 +158,13 @@ int misc_init_r(void) (void)flash_protect(FLAG_PROTECT_SET, -CFG_MONITOR_LEN, 0xffffffff, - &flash_info[0]); + &flash_info[1]); /* Env protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND, CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1, - &flash_info[0]); + &flash_info[1]); /* * USB suff... @@ -221,8 +221,8 @@ int misc_init_r(void) udelay(500); gpio_write_bit(CFG_GPIO_LIME_RST, 1); - /* Lime memory clock adjusted to 133MHz */ - out_be32((void *)CFG_LIME_SDRAM_CLOCK, CFG_LIME_CLOCK_133MHZ); + /* Lime memory clock adjusted to 100MHz */ + out_be32((void *)CFG_LIME_SDRAM_CLOCK, CFG_LIME_CLOCK_100MHZ); /* Wait untill time expired. Because of requirements in lime manual */ udelay(300); /* Write lime controller memory parameters */ @@ -237,6 +237,64 @@ int misc_init_r(void) gpio_write_bit(CFG_GPIO_PHY0_RST, 1); gpio_write_bit(CFG_GPIO_PHY1_RST, 1); + /* + * Init display controller + */ + /* Setup dot clock (internal PLL, division rate 1/16) */ + out_be32((void *)0xc1fd0100, 0x00000f00); + + /* Lime L0 init (16 bpp, 640x480) */ + out_be32((void *)0xc1fd0020, 0x801401df); + out_be32((void *)0xc1fd0024, 0x0); + out_be32((void *)0xc1fd0028, 0x0); + out_be32((void *)0xc1fd002c, 0x0); + out_be32((void *)0xc1fd0110, 0x0); + out_be32((void *)0xc1fd0114, 0x0); + out_be32((void *)0xc1fd0118, 0x01df0280); + + /* Display timing init */ + out_be32((void *)0xc1fd0004, 0x031f0000); + out_be32((void *)0xc1fd0008, 0x027f027f); + out_be32((void *)0xc1fd000c, 0x015f028f); + out_be32((void *)0xc1fd0010, 0x020c0000); + out_be32((void *)0xc1fd0014, 0x01df01ea); + out_be32((void *)0xc1fd0018, 0x0); + out_be32((void *)0xc1fd001c, 0x01e00280); + +#if 1 + /* + * Clear framebuffer using Lime's drawing engine + * (draw blue rect. with white border around it) + */ + /* Setup mode and fbbase, xres, fg, bg */ + out_be32((void *)0xc1ff0420, 0x8300); + out_be32((void *)0xc1ff0440, 0x0000); + out_be32((void *)0xc1ff0444, 0x0280); + out_be32((void *)0xc1ff0480, 0x7fff); + out_be32((void *)0xc1ff0484, 0x0000); + /* Reset clipping rectangle */ + out_be32((void *)0xc1ff0454, 0x0000); + out_be32((void *)0xc1ff0458, 0x0280); + out_be32((void *)0xc1ff045c, 0x0000); + out_be32((void *)0xc1ff0460, 0x01e0); + /* Draw white rect. */ + out_be32((void *)0xc1ff04a0, 0x09410000); + out_be32((void *)0xc1ff04a0, 0x00000000); + out_be32((void *)0xc1ff04a0, 0x01e00280); + udelay(2000); + /* Draw blue rect. */ + out_be32((void *)0xc1ff0480, 0x001f); + out_be32((void *)0xc1ff04a0, 0x09410000); + out_be32((void *)0xc1ff04a0, 0x00010001); + out_be32((void *)0xc1ff04a0, 0x01de027e); +#endif + /* Display enable, L0 layer */ + out_be32((void *)0xc1fd0100, 0x80010f00); + + /* TFT-LCD enable - PWM duty, lamp on */ + out_be32((void *)0xc4000024, 0x64); + out_be32((void *)0xc4000020, 0x701); + return 0; } @@ -463,3 +521,14 @@ void hw_watchdog_reset(void) val = gpio_read_out_bit(CFG_GPIO_WATCHDOG) == 0 ? 1 : 0; gpio_write_bit(CFG_GPIO_WATCHDOG, val); } + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + return (ctrlc()); +} +#endif |