diff options
Diffstat (limited to 'board/ifm/o2dnt2')
| -rw-r--r-- | board/ifm/o2dnt2/Makefile | 34 | ||||
| -rw-r--r-- | board/ifm/o2dnt2/o2dnt2.c | 400 |
2 files changed, 434 insertions, 0 deletions
diff --git a/board/ifm/o2dnt2/Makefile b/board/ifm/o2dnt2/Makefile new file mode 100644 index 000000000..e05b9c1c5 --- /dev/null +++ b/board/ifm/o2dnt2/Makefile @@ -0,0 +1,34 @@ +# +# (C) Copyright 2005-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ifm/o2dnt2/o2dnt2.c b/board/ifm/o2dnt2/o2dnt2.c new file mode 100644 index 000000000..40a530577 --- /dev/null +++ b/board/ifm/o2dnt2/o2dnt2.c @@ -0,0 +1,400 @@ +/* + * Partially derived from board code for digsyMTC, + * (C) Copyright 2009 + * Grzegorz Bernacki, Semihalf, gjb@semihalf.com + * + * (C) Copyright 2012 + * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc5xxx.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <i2c.h> +#include <miiphy.h> +#include <net.h> +#include <pci.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define SDRAM_MODE 0x00CD0000 +#define SDRAM_CONTROL 0x504F0000 +#define SDRAM_CONFIG1 0xD2322800 +#define SDRAM_CONFIG2 0x8AD70000 + +enum ifm_sensor_type { + O2DNT = 0x00, /* !< O2DNT 32MB */ + O2DNT2 = 0x01, /* !< O2DNT2 64MB */ + O3DNT = 0x02, /* !< O3DNT 32MB */ + O3DNT_MIN = 0x40, /* !< O3DNT Minerva 32MB */ + UNKNOWN = 0xff, /* !< Unknow sensor */ +}; + +static enum ifm_sensor_type gt_ifm_sensor_type; + +#ifndef CONFIG_SYS_RAMBOOT +static void sdram_start(int hi_addr) +{ + struct mpc5xxx_sdram *sdram = (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + long control = SDRAM_CONTROL | hi_addr_bit; + + /* unlock mode register */ + out_be32(&sdram->ctrl, control | 0x80000000); + + /* precharge all banks */ + out_be32(&sdram->ctrl, control | 0x80000002); + + /* auto refresh */ + out_be32(&sdram->ctrl, control | 0x80000004); + + /* set mode register */ + out_be32(&sdram->mode, SDRAM_MODE); + + /* normal operation */ + out_be32(&sdram->ctrl, control); +} +#endif + +/* + * ATTENTION: Although partially referenced initdram does NOT make real use + * use of CONFIG_SYS_SDRAM_BASE. The code does not work if + * CONFIG_SYS_SDRAM_BASE is something else than 0x00000000. + */ +phys_size_t initdram(int board_type) +{ + struct mpc5xxx_mmap_ctl *mmap_ctl = + (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; + struct mpc5xxx_sdram *sdram = (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; + ulong dramsize = 0; + ulong dramsize2 = 0; + uint svr, pvr; + + if (gt_ifm_sensor_type == O2DNT2) { + /* activate SDRAM CS1 */ + setbits_be32((void *)MPC5XXX_GPS_PORT_CONFIG, 0x80000000); + } + +#ifndef CONFIG_SYS_RAMBOOT + ulong test1, test2; + + /* setup SDRAM chip selects */ + out_be32(&mmap_ctl->sdram0, 0x0000001E); /* 2 GB at 0x0 */ + out_be32(&mmap_ctl->sdram1, 0x00000000); /* disabled */ + + /* setup config registers */ + out_be32(&sdram->config1, SDRAM_CONFIG1); + out_be32(&sdram->config2, SDRAM_CONFIG2); + + /* find RAM size using SDRAM CS0 only */ + sdram_start(0); + test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000); + sdram_start(1); + test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) + dramsize = 0; + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + out_be32(&mmap_ctl->sdram0, + (0x13 + __builtin_ffs(dramsize >> 20) - 1)); + } else { + out_be32(&mmap_ctl->sdram0, 0); /* disabled */ + } + + /* let SDRAM CS1 start right after CS0 */ + out_be32(&mmap_ctl->sdram1, dramsize + 0x0000001E); /* 2G */ + + /* find RAM size using SDRAM CS1 only */ + if (!dramsize) + sdram_start(0); + + test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), + 0x80000000); + if (!dramsize) { + sdram_start(1); + test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), + 0x80000000); + } + + if (test1 > test2) { + sdram_start(0); + dramsize2 = test1; + } else { + dramsize2 = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize2 < (1 << 20)) + dramsize2 = 0; + + /* set SDRAM CS1 size according to the amount of RAM found */ + if (dramsize2 > 0) { + out_be32(&mmap_ctl->sdram1, (dramsize | + (0x13 + __builtin_ffs(dramsize2 >> 20) - 1))); + } else { + out_be32(&mmap_ctl->sdram1, dramsize); /* disabled */ + } + +#else /* CONFIG_SYS_RAMBOOT */ + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = in_be32(&mmap_ctl->sdram0) & 0xFF; + if (dramsize >= 0x13) + dramsize = (1 << (dramsize - 0x13)) << 20; + else + dramsize = 0; + + /* retrieve size of memory connected to SDRAM CS1 */ + dramsize2 = in_be32(&mmap_ctl->sdram1) & 0xFF; + if (dramsize2 >= 0x13) + dramsize2 = (1 << (dramsize2 - 0x13)) << 20; + else + dramsize2 = 0; + +#endif /* CONFIG_SYS_RAMBOOT */ + + /* + * On MPC5200B we need to set the special configuration delay in the + * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM + * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: + * + * "The SDelay should be written to a value of 0x00000004. It is + * required to account for changes caused by normal wafer processing + * parameters." + */ + svr = get_svr(); + pvr = get_pvr(); + if ((SVR_MJREV(svr) >= 2) && + (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) + out_be32(&sdram->sdelay, 0x04); + + return dramsize + dramsize2; +} + + +#define GPT_GPIO_IN 0x4 + +int checkboard(void) +{ + struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)MPC5XXX_GPT; + unsigned char board_config = 0; + int i; + + /* switch gpt0 - gpt7 to input */ + for (i = 0; i < 7; i++) + out_be32(&gpt[i].emsr, GPT_GPIO_IN); + + /* get configuration byte on timer-port */ + for (i = 0; i < 7; i++) + board_config |= (in_be32(&gpt[i].sr) & 0x100) >> (8 - i); + + puts("Board: "); + + switch (board_config) { + case 0: + puts("O2DNT\n"); + gt_ifm_sensor_type = O2DNT; + break; + case 1: + puts("O3DNT\n"); + gt_ifm_sensor_type = O3DNT; + break; + case 2: + puts("O2DNT2\n"); + gt_ifm_sensor_type = O2DNT2; + break; + case 64: + puts("O3DNT Minerva\n"); + gt_ifm_sensor_type = O3DNT_MIN; + break; + default: + puts("Unknown\n"); + gt_ifm_sensor_type = UNKNOWN; + break; + } + + return 0; +} + +int board_early_init_r(void) +{ + struct mpc5xxx_lpb *lpb_regs = (struct mpc5xxx_lpb *)MPC5XXX_LPB; + + /* + * Now, when we are in RAM, enable flash write access for detection + * process. Note that CS_BOOT cannot be cleared when executing in flash. + */ + clrbits_be32(&lpb_regs->cs0_cfg, 1); /* clear RO */ + /* disable CS_BOOT */ + clrbits_be32((void *)MPC5XXX_ADDECR, (1 << 25)); + /* enable CS0 */ + setbits_be32((void *)MPC5XXX_ADDECR, (1 << 16)); + + return 0; +} + +#define MIIM_LXT971_LED_CFG_REG 0x14 +#define LXT971_LED_CFG_LINK_STATUS 0x4000 +#define LXT971_LED_CFG_RX_TX_ACTIVITY 0x0700 +#define LXT971_LED_CFG_LINK_ACTIVITY 0x00D0 +#define LXT971_LED_CFG_PULSE_STRETCH 0x0002 +/* + * Additional PHY intialization after reset in mpc5xxx_fec_init_phy() + */ +void reset_phy(void) +{ + /* + * Set LED configuration bits. + * It can't be done in misc_init_r() since FEC is not + * initialized at this time. Therefore we do it here. + */ + miiphy_write("FEC", CONFIG_PHY_ADDR, MIIM_LXT971_LED_CFG_REG, + LXT971_LED_CFG_LINK_STATUS | + LXT971_LED_CFG_RX_TX_ACTIVITY | + LXT971_LED_CFG_LINK_ACTIVITY | + LXT971_LED_CFG_PULSE_STRETCH); +} + +#if defined(CONFIG_POST) +/* + * Reads GPIO pin PSC6_3. A keypress is reported, if PSC6_3 is low. If PSC6_3 + * is left open, no keypress is detected. + */ +int post_hotkeys_pressed(void) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *) MPC5XXX_GPIO; + + /* + * Configure PSC6_1 and PSC6_3 as GPIO. PSC6 then couldn't be used in + * CODEC or UART mode. Consumer IrDA should still be possible. + */ + clrbits_be32(&gpio->port_config, 0x07000000); + setbits_be32(&gpio->port_config, 0x03000000); + + /* Enable GPIO for GPIO_IRDA_1 (IR_USB_CLK pin) = PSC6_3 */ + setbits_be32(&gpio->simple_gpioe, 0x20000000); + + /* Configure GPIO_IRDA_1 as input */ + clrbits_be32(&gpio->simple_ddr, 0x20000000); + + return (in_be32(&gpio->simple_ival) & 0x20000000) ? 0 : 1; +} +#endif + +#ifdef CONFIG_PCI +static struct pci_controller hose; + +void pci_init_board(void) +{ + pci_mpc5xxx_init(&hose); +} +#endif + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE) +static void ft_adapt_flash_base(void *blob) +{ + flash_info_t *dev = &flash_info[0]; + int off; + struct fdt_property *prop; + int len; + u32 *reg, *reg2; + + off = fdt_node_offset_by_compatible(blob, -1, "fsl,mpc5200b-lpb"); + if (off < 0) { + printf("Could not find fsl,mpc5200b-lpb node.\n"); + return; + } + + /* found compatible property */ + prop = fdt_get_property_w(blob, off, "ranges", &len); + if (prop) { + reg = reg2 = (u32 *)&prop->data[0]; + + reg[2] = dev->start[0]; + reg[3] = dev->size; + fdt_setprop(blob, off, "ranges", reg2, len); + } else + printf("Could not find ranges\n"); +} + +extern ulong flash_get_size(phys_addr_t base, int banknum); + +/* Update the flash baseaddr settings */ +int update_flash_size(int flash_size) +{ + struct mpc5xxx_mmap_ctl *mm = + (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR; + flash_info_t *dev; + int i; + int size = 0; + unsigned long base = 0x0; + u32 *cs_reg = (u32 *)&mm->cs0_start; + + for (i = 0; i < 2; i++) { + dev = &flash_info[i]; + + if (dev->size) { + /* calculate new base addr for this chipselect */ + base -= dev->size; + out_be32(cs_reg, START_REG(base)); + cs_reg++; + out_be32(cs_reg, STOP_REG(base, dev->size)); + cs_reg++; + /* recalculate the sectoraddr in the cfi driver */ + size += flash_get_size(base, i); + } + } + flash_protect_default(); + gd->bd->bi_flashstart = base; + return 0; +} +#endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */ + +void ft_board_setup(void *blob, bd_t *bd) +{ + int phy_addr = CONFIG_PHY_ADDR; + char eth_path[] = "/soc5200@f0000000/mdio@3000/ethernet-phy@0"; + + ft_cpu_setup(blob, bd); + +#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE) +#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE + /* Update reg property in all nor flash nodes too */ + fdt_fixup_nor_flash_size(blob); +#endif + ft_adapt_flash_base(blob); +#endif + /* fix up the phy address */ + do_fixup_by_path(blob, eth_path, "reg", &phy_addr, sizeof(int), 0); +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ |