diff options
Diffstat (limited to 'board/gdsys/p1022/ddr.c')
| -rw-r--r-- | board/gdsys/p1022/ddr.c | 71 | 
1 files changed, 71 insertions, 0 deletions
| diff --git a/board/gdsys/p1022/ddr.c b/board/gdsys/p1022/ddr.c new file mode 100644 index 000000000..4a652de43 --- /dev/null +++ b/board/gdsys/p1022/ddr.c @@ -0,0 +1,71 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> + *          Timur Tabi <timur@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <common.h> +#include <i2c.h> + +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> + +void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, +			   unsigned int ctrl_num) +{ +	unsigned int i; + +	if (ctrl_num) { +		printf("Wrong parameter for controller number %d", ctrl_num); +		return; +	} +	if (!pdimm->n_ranks) +		return; + +	/* set odt_rd_cfg and odt_wr_cfg. */ +	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { +		popts->cs_local_opts[i].odt_rd_cfg = 0; +		popts->cs_local_opts[i].odt_wr_cfg = 1; +	} + +	popts->clk_adjust = 5; +	popts->cpo_override = 0x1f; +	popts->write_data_delay = 2; +	popts->half_strength_driver_enable = 1; + +	/* Per AN4039, enable ZQ calibration. */ +	popts->zq_en = 1; +} + +#ifdef CONFIG_SPD_EEPROM +/* + * we only have a "fake" SPD-EEPROM here, which has 16 bit addresses + */ +void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) +{ +	int ret = i2c_read(i2c_address, 0, 2, (uchar *)spd, +				sizeof(generic_spd_eeprom_t)); + +	if (ret) { +		if (i2c_address == +#ifdef SPD_EEPROM_ADDRESS +				SPD_EEPROM_ADDRESS +#elif defined(SPD_EEPROM_ADDRESS1) +				SPD_EEPROM_ADDRESS1 +#endif +				) { +			printf("DDR: failed to read SPD from address %u\n", +			       i2c_address); +		} else { +			debug("DDR: failed to read SPD from address %u\n", +			      i2c_address); +		} +		memset(spd, 0, sizeof(generic_spd_eeprom_t)); +	} +} +#endif |