diff options
Diffstat (limited to 'board/freescale')
| -rw-r--r-- | board/freescale/bsc9132qds/Makefile | 52 | ||||
| -rw-r--r-- | board/freescale/bsc9132qds/README | 150 | ||||
| -rw-r--r-- | board/freescale/bsc9132qds/bsc9132qds.c | 403 | ||||
| -rw-r--r-- | board/freescale/bsc9132qds/ddr.c | 209 | ||||
| -rw-r--r-- | board/freescale/bsc9132qds/law.c | 35 | ||||
| -rw-r--r-- | board/freescale/bsc9132qds/tlb.c | 92 |
6 files changed, 941 insertions, 0 deletions
diff --git a/board/freescale/bsc9132qds/Makefile b/board/freescale/bsc9132qds/Makefile new file mode 100644 index 000000000..267400bec --- /dev/null +++ b/board/freescale/bsc9132qds/Makefile @@ -0,0 +1,52 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/bsc9132qds/README b/board/freescale/bsc9132qds/README new file mode 100644 index 000000000..4a3dbfe5d --- /dev/null +++ b/board/freescale/bsc9132qds/README @@ -0,0 +1,150 @@ +Overview +-------- + The BSC9132 is a highly integrated device that targets the evolving + Microcell, Picocell, and Enterprise-Femto base station market subsegments. + + The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850 + core technologies with MAPLE-B2P baseband acceleration processing elements + to address the need for a high performance, low cost, integrated solution + that handles all required processing layers without the need for an + external device except for an RF transceiver or, in a Micro base station + configuration, a host device that handles the L3/L4 and handover between + sectors. + + The BSC9132 SoC includes the following function and features: + - Power Architecture subsystem including two e500 processors with + 512-Kbyte shared L2 cache + - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2 + cache + - 32 Kbyte of shared M3 memory + - The Multi Accelerator Platform Engine for Pico BaseStation Baseband + Processing (MAPLE-B2P) + - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including + ECC), up to 1333 MHz data rate + - Dedicated security engine featuring trusted boot + - Two DMA controllers + - OCNDMA with four bidirectional channels + - SysDMA with sixteen bidirectional channels + - Interfaces + - Four-lane SerDes PHY + - PCI Express controller complies with the PEX Specification-Rev 2.0 + - Two Common Public Radio Interface (CPRI) controller lanes + - High-speed USB 2.0 host and device controller with ULPI interface + - Enhanced secure digital (SD/MMC) host controller (eSDHC) + - Antenna interface controller (AIC), supporting four industry + standard JESD207/four custom ADI RF interfaces + - ADI lanes support both full duplex FDD support & half duplex TDD + - Universal Subscriber Identity Module (USIM) interface that + facilitates communication to SIM cards or Eurochip pre-paid phone + cards + - Two DUART, two eSPI, and two I2C controllers + - Integrated Flash memory controller (IFC) + - GPIO + - Sixteen 32-bit timers + +The SC3850 core subsystem consists of the following: + - 32 KB, 8-way, level 1 instruction cache (L1 ICache) + - 32 KB, 8-way, level 1 data cache (L1 DCache) + - 512 KB, 8-way, level 2 unified instruction/data cache (L2 cache/M2 memory) + - Memory management unit (MMU) + - Global interrupt controller ( GIC) + - Debug and profiling unit (DPU) + - Two 32-bit quad timers + +BSC9132QDS board Overview +------------------------- + 2Gbyte DDR3 (on board DDR), Dual Ranki + 32Mbyte 16bit NOR flash + 128Mbyte 2K page size NAND Flash + 256 Kbit M24256 I2C EEPROM + 128 Mbit SPI Flash memory + SD slot + USB-ULPI + eTSEC1: Connected to SGMII PHY + eTSEC2: Connected to SGMII PHY + PCIe + CPRI + SerDes + I2C RTC + DUART interface: supports one UARTs up to 115200 bps for console display + +Frequency Combinations Supported +-------------------------------- +Core MHz/CCB MHz/DDR(MT/s) +1. CPU0/CPU1/CCB/DDR: 1000MHz/1000MHz/500MHz/800MHz + (SYSCLK = 100MHz, DDRCLK = 100MHz) +2. CPU0/CPU1/CCB/DDR: 1200MHz/1200MHz/600MHz/1330MHz + (SYSCLK = 100MHz, DDRCLK = 133MHz) + +Boot Methods Supported +----------------------- +1. NOR Flash +2. NAND Flash +3. SD Card +4. SPI flash + +Default Boot Method +-------------------- +NOR boot + +Building U-boot +-------------- +To build the u-boot for BSC9132QDS: +1. NOR Flash + make BSC9132QDS_NOR_DDRCLK100 : For 100MHZ DDR CLK + make BSC9132QDS_NOR_DDRCLK133 : For 133MHZ DDR CLK +2. NAND Flash : It is currently not supported +3. SPI Flash + make BSC9132QDS_SPIFLASH_DDRCLK100 : For 100MHZ DDR CLK + make BSC9132QDS_SPIFLASH_DDRCLK133 : For 133MHZ DDR CLK +4. SD Card + make BSC9132QDS_SDCARD_DDRCLK100 : For 100MHZ DDR CLK + make BSC9132QDS_SDCARD_DDRCLK133 : For 133MHZ DDR CLK + +Memory map +----------- + 0x0000_0000 0x7FFF_FFFF DDR 2G cacheable + 0x8000_0000 0x8FFF_FFFF NOR Flash 256M + 0x9000_0000 0x9FFF_FFFF PCIe Memory 256M + 0xA000_0000 0xA7FF_FFFF DSP core1 L2 space 128M + 0xB000_0000 0xB0FF_FFFF DSP core0 M2 space 16M + 0xB100_0000 0xB1FF_FFFF DSP core1 M2 space 16M + 0xC000_0000 0xC000_7FFF M3 Memory 32K + 0xC001_0000 0xC001_FFFF PCI Express I/O 64K + 0xC100_0000 0xC13F_FFFF MAPLE-2F 4M + 0xC1F0_0000 0xC1F7_FFFF PA SRAM Region 0 512K + 0xC1F8_0000 0xC1FB_FFFF PA SRAM Region 1 512K + 0xFED0_0000 0xFED0_3FFF SEC Secured RAM 16K + 0xFEE0_0000 0xFEE0_0FFF DSP Boot ROM 4K + 0xFF60_0000 0xFF6F_FFFF DSP CCSR 1M + 0xFF70_0000 0xFF7F_FFFF PA CCSR 1M + 0xFF80_0000 0xFFFF_FFFF Boot Page & NAND Buffer 8M + +Flashing Images +--------------- +To place a new u-boot image in the NAND flash and then boot +with that new image temporarily, use this: + tftp 1000000 u-boot-nand.bin + nand erase 0 100000 + nand write 1000000 0 100000 + reset + +Using the Device Tree Source File +--------------------------------- +To create the DTB (Device Tree Binary) image file, +use a command similar to this: + + dtc -b 0 -f -I dts -O dtb bsc9132qds.dts > bsc9132qds.dtb + +Likely, that .dts file will come from here; + + linux-2.6/arch/powerpc/boot/dts/bsc9132qds.dts + +Booting Linux +------------- +Place a linux uImage in the TFTP disk area. + + tftp 1000000 uImage + tftp 2000000 rootfs.ext2.gz.uboot + tftp c00000 bsc9132qds.dtb + bootm 1000000 2000000 c00000 diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c new file mode 100644 index 000000000..bcac5c1dd --- /dev/null +++ b/board/freescale/bsc9132qds/bsc9132qds.c @@ -0,0 +1,403 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/io.h> +#include <miiphy.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <fsl_mdio.h> +#include <tsec.h> +#include <mmc.h> +#include <netdev.h> +#include <asm/fsl_ifc.h> +#include <hwconfig.h> +#include <i2c.h> +#include <asm/fsl_ddr_sdram.h> + +#ifdef CONFIG_PCI +#include <pci.h> +#include <asm/fsl_pci.h> +#endif + +#include "../common/qixis.h" +DECLARE_GLOBAL_DATA_PTR; + + +int board_early_init_f(void) +{ + struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR; + + setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT); + + return 0; +} + +void board_config_serdes_mux(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + + switch (srds_cfg) { + /* PEX(1) PEX(2) CPRI 2 CPRI 1 */ + case 1: + case 2: + case 3: + case 4: + case 5: + case 22: + case 23: + case 24: + case 25: + case 26: + QIXIS_WRITE_I2C(brdcfg[4], 0x03); + break; + + /* PEX(1) PEX(2) SGMII1 CPRI 1 */ + case 6: + case 7: + case 8: + case 9: + case 10: + case 27: + case 28: + case 29: + case 30: + case 31: + QIXIS_WRITE_I2C(brdcfg[4], 0x01); + break; + + /* PEX(1) PEX(2) SGMII1 SGMII2 */ + case 11: + case 32: + QIXIS_WRITE_I2C(brdcfg[4], 0x00); + break; + + /* PEX(1) SGMII2 CPRI 2 CPRI 1 */ + case 12: + case 13: + case 14: + case 15: + case 16: + case 33: + case 34: + case 35: + case 36: + case 37: + QIXIS_WRITE_I2C(brdcfg[4], 0x07); + break; + + /* PEX(1) SGMII2 SGMII1 CPRI 1 */ + case 17: + case 18: + case 19: + case 20: + case 21: + case 38: + case 39: + case 40: + case 41: + case 42: + QIXIS_WRITE_I2C(brdcfg[4], 0x05); + break; + + /* SGMII1 SGMII2 CPRI 2 CPRI 1 */ + case 43: + case 44: + case 45: + case 46: + case 47: + QIXIS_WRITE_I2C(brdcfg[4], 0x0F); + break; + + + default: + break; + } +} + +int board_early_init_r(void) +{ +#ifndef CONFIG_SYS_NO_FLASH + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_64M, 1); + + set_tlb(1, flashbase + 0x4000000, + CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel+1, BOOKE_PAGESZ_64M, 1); +#endif + board_config_serdes_mux(); + return 0; +} + +#ifdef CONFIG_PCI +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} +#endif /* ifdef CONFIG_PCI */ + +int checkboard(void) +{ + struct cpu_type *cpu; + u8 sw; + + cpu = gd->cpu; + printf("Board: %sQDS\n", cpu->name); + + printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x,\n", + QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver)); + + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; + + printf("IFC chip select:"); + switch (sw) { + case 0: + printf("NOR\n"); + break; + case 2: + printf("Promjet\n"); + break; + case 4: + printf("NAND\n"); + break; + default: + printf("Invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); + break; + } + + return 0; +} + +#ifdef CONFIG_TSEC_ENET +int board_eth_init(bd_t *bis) +{ + struct fsl_pq_mdio_info mdio_info; + struct tsec_info_struct tsec_info[4]; + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + num++; + +#endif + +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + num++; +#endif + + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + + fsl_pq_mdio_init(bis, &mdio_info); + tsec_eth_init(bis, tsec_info, num); + + #ifdef CONFIG_PCI + pci_eth_init(bis); + #endif + + return 0; +} +#endif + +#define USBMUX_SEL_MASK 0xc0 +#define USBMUX_SEL_UART2 0xc0 +#define USBMUX_SEL_USB 0x40 +#define SPIMUX_SEL_UART3 0x80 +#define GPS_MUX_SEL_GPS 0x40 + +#define TSEC_1588_CLKIN_MASK 0x03 +#define CON_XCVR_REF_CLK 0x00 + +int misc_init_r(void) +{ + u8 val; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 porbmsr = in_be32(&gur->porbmsr); + u32 romloc = (porbmsr >> MPC85XX_PORBMSR_ROMLOC_SHIFT) & 0xf; + + /*Configure 1588 clock-in source from RF Card*/ + val = QIXIS_READ_I2C(brdcfg[5]); + QIXIS_WRITE_I2C(brdcfg[5], + (val & ~(TSEC_1588_CLKIN_MASK)) | CON_XCVR_REF_CLK); + + if (hwconfig("uart2") && hwconfig("usb1")) { + printf("UART2 and USB cannot work together on the board\n"); + printf("Remove one from hwconfig and reset\n"); + } else { + if (hwconfig("uart2")) { + val = QIXIS_READ_I2C(brdcfg[5]); + QIXIS_WRITE_I2C(brdcfg[5], + (val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_UART2); + clrbits_be32(&gur->pmuxcr3, + MPC85xx_PMUXCR3_USB_SEL_MASK); + setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART2_SEL); + } else { + /* By default USB should be selected. + * Programming FPGA to select USB. */ + val = QIXIS_READ_I2C(brdcfg[5]); + QIXIS_WRITE_I2C(brdcfg[5], + (val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_USB); + } + + } + + if (hwconfig("sim")) { + if (romloc == PORBMSR_ROMLOC_NAND_2K || + romloc == PORBMSR_ROMLOC_NOR || + romloc == PORBMSR_ROMLOC_SPI) { + + val = QIXIS_READ_I2C(brdcfg[3]); + QIXIS_WRITE_I2C(brdcfg[3], val|0x10); + clrbits_be32(&gur->pmuxcr, + MPC85xx_PMUXCR0_SIM_SEL_MASK); + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR0_SIM_SEL); + } + } + + if (hwconfig("uart3")) { + if (romloc == PORBMSR_ROMLOC_NAND_2K || + romloc == PORBMSR_ROMLOC_NOR || + romloc == PORBMSR_ROMLOC_SDHC) { + + /* UART3 and SPI1 (Flashes) are muxed together */ + val = QIXIS_READ_I2C(brdcfg[3]); + QIXIS_WRITE_I2C(brdcfg[3], (val | SPIMUX_SEL_UART3)); + clrbits_be32(&gur->pmuxcr3, + MPC85xx_PMUXCR3_UART3_SEL_MASK); + setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART3_SEL); + + /* MUX to select UART3 connection to J24 header + * or to GPS */ + val = QIXIS_READ_I2C(brdcfg[6]); + if (hwconfig("gps")) + QIXIS_WRITE_I2C(brdcfg[6], + (val | GPS_MUX_SEL_GPS)); + else + QIXIS_WRITE_I2C(brdcfg[6], + (val & ~(GPS_MUX_SEL_GPS))); + } + } + return 0; +} + +void fdt_del_node_compat(void *blob, const char *compatible) +{ + int err; + int off = fdt_node_offset_by_compatible(blob, -1, compatible); + if (off < 0) { + printf("WARNING: could not find compatible node %s: %s.\n", + compatible, fdt_strerror(off)); + return; + } + err = fdt_del_node(blob, off); + if (err < 0) { + printf("WARNING: could not remove %s: %s.\n", + compatible, fdt_strerror(err)); + } +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + #if defined(CONFIG_PCI) + FT_FSL_PCI_SETUP; + #endif + + fdt_fixup_memory(blob, (u64)base, (u64)size); + + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 porbmsr = in_be32(&gur->porbmsr); + u32 romloc = (porbmsr >> MPC85XX_PORBMSR_ROMLOC_SHIFT) & 0xf; + + if (!(hwconfig("uart2") && hwconfig("usb1"))) { + /* If uart2 is there in hwconfig remove usb node from + * device tree */ + + if (hwconfig("uart2")) { + /* remove dts usb node */ + fdt_del_node_compat(blob, "fsl-usb2-dr"); + } else { + fdt_fixup_dr_usb(blob, bd); + fdt_del_node_and_alias(blob, "serial2"); + } + } + + if (hwconfig("uart3")) { + if (romloc == PORBMSR_ROMLOC_NAND_2K || + romloc == PORBMSR_ROMLOC_NOR || + romloc == PORBMSR_ROMLOC_SDHC) + /* Delete SPI node from the device tree */ + fdt_del_node_and_alias(blob, "spi1"); + } else + fdt_del_node_and_alias(blob, "serial3"); + + if (hwconfig("sim")) { + if (romloc == PORBMSR_ROMLOC_NAND_2K || + romloc == PORBMSR_ROMLOC_NOR || + romloc == PORBMSR_ROMLOC_SPI) { + + /* remove dts sdhc node */ + fdt_del_node_compat(blob, "fsl,esdhc"); + } else if (romloc == PORBMSR_ROMLOC_SDHC) { + + /* remove dts sim node */ + fdt_del_node_compat(blob, "fsl,sim-v1.0"); + printf("SIM & SDHC can't work together on the board"); + printf("\nRemove sim from hwconfig and reset\n"); + } + } +} +#endif diff --git a/board/freescale/bsc9132qds/ddr.c b/board/freescale/bsc9132qds/ddr.c new file mode 100644 index 000000000..946ad190b --- /dev/null +++ b/board/freescale/bsc9132qds/ddr.c @@ -0,0 +1,209 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> +#include <asm/immap_85xx.h> +#include <asm/processor.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> +#include <asm/io.h> +#include <asm/fsl_law.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifndef CONFIG_SYS_DDR_RAW_TIMING + +fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = { + .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, + .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, + .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, + .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800, + .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800, + .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800, + .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800, + .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL, + .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2, + .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800, + .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800, + .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, + .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800, + .ddr_data_init = CONFIG_MEM_INIT_VALUE, + .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800, + .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, + .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, + .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, + .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, + .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL, + .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_800, + .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR, + .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, + .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 +}; + +fsl_ddr_cfg_regs_t ddr_cfg_regs_1333 = { + .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, + .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, + .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, + .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1333, + .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1333, + .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1333, + .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1333, + .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL, + .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2, + .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1333, + .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1333, + .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, + .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1333, + .ddr_data_init = CONFIG_MEM_INIT_VALUE, + .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1333, + .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, + .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, + .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, + .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, + .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL, + .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_1333, + .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR, + .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, + .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 +}; + + +fixed_ddr_parm_t fixed_ddr_parm_0[] = { + {750, 850, &ddr_cfg_regs_800}, + {1060, 1333, &ddr_cfg_regs_1333}, + {0, 0, NULL} +}; + +/* + * Fixed sdram init -- doesn't use serial presence detect. + */ +phys_size_t fixed_sdram(void) +{ + int i; + char buf[32]; + fsl_ddr_cfg_regs_t ddr_cfg_regs; + phys_size_t ddr_size; + ulong ddr_freq, ddr_freq_mhz; + + ddr_freq = get_ddr_freq(0); + ddr_freq_mhz = ddr_freq / 1000000; + + printf("Configuring DDR for %s MT/s data rate\n", + strmhz(buf, ddr_freq)); + + for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) { + if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) && + (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) { + memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings, + sizeof(ddr_cfg_regs)); + break; + } + } + + if (fixed_ddr_parm_0[i].max_freq == 0) + panic("Unsupported DDR data rate %s MT/s data rate\n", + strmhz(buf, ddr_freq)); + + ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + + if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size, + LAW_TRGT_IF_DDR_1) < 0) { + printf("ERROR setting Local Access Windows for DDR\n"); + return 0; + } + + return ddr_size; +} + +#else /* CONFIG_SYS_DDR_RAW_TIMING */ +/* Micron MT41J512M8_187E */ +dimm_params_t ddr_raw_timing = { + .n_ranks = 1, + .rank_density = 1073741824u, + .capacity = 1073741824u, + .primary_sdram_width = 32, + .ec_sdram_width = 0, + .registered_dimm = 0, + .mirrored_dimm = 0, + .n_row_addr = 15, + .n_col_addr = 10, + .n_banks_per_sdram_device = 8, + .edc_config = 0, + .burst_lengths_bitmask = 0x0c, + + .tCKmin_X_ps = 1870, + .caslat_X = 0x1e << 4, /* 5,6,7,8 */ + .tAA_ps = 13125, + .tWR_ps = 15000, + .tRCD_ps = 13125, + .tRRD_ps = 7500, + .tRP_ps = 13125, + .tRAS_ps = 37500, + .tRC_ps = 50625, + .tRFC_ps = 160000, + .tWTR_ps = 7500, + .tRTP_ps = 7500, + .refresh_rate_ps = 7800000, + .tFAW_ps = 37500, +}; + +int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, + unsigned int controller_number, + unsigned int dimm_number) +{ + const char dimm_model[] = "Fixed DDR on board"; + + if ((controller_number == 0) && (dimm_number == 0)) { + memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t)); + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1); + } + + return 0; +} + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + int i; + popts->clk_adjust = 6; + popts->cpo_override = 0x1f; + popts->write_data_delay = 2; + popts->half_strength_driver_enable = 1; + /* Write leveling override */ + popts->wrlvl_en = 1; + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + popts->wrlvl_start = 0x8; + popts->trwt_override = 1; + popts->trwt = 0; + + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER; + popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS; + } +} + +#endif /* CONFIG_SYS_DDR_RAW_TIMING */ diff --git a/board/freescale/bsc9132qds/law.c b/board/freescale/bsc9132qds/law.c new file mode 100644 index 000000000..dc2365851 --- /dev/null +++ b/board/freescale/bsc9132qds/law.c @@ -0,0 +1,35 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { +#ifndef CONFIG_SYS_NO_FLASH + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_IFC), +#endif + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC), + SET_LAW(CONFIG_SYS_FPGA_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c new file mode 100644 index 000000000..0e4545fb1 --- /dev/null +++ b/board/freescale/bsc9132qds/tlb.c @@ -0,0 +1,92 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 1), + + /* *I*G* - CCSRBAR (PA) */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 3, BOOKE_PAGESZ_64M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x4000000, + CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 4, BOOKE_PAGESZ_64M, 1), + +#if defined(CONFIG_SYS_RAMBOOT) + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 8, BOOKE_PAGESZ_1G, 1), +#endif + +#ifdef CONFIG_PCI + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_64K, 1), +#endif + + /* *I*G - Board FPGA */ + SET_TLB_ENTRY(1, CONFIG_SYS_FPGA_BASE, CONFIG_SYS_FPGA_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 9, BOOKE_PAGESZ_256K, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_1M, 1), +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); |