1 files changed, 161 insertions, 0 deletions
diff --git a/board/freescale/p1023rdb/p1023rdb.c b/board/freescale/p1023rdb/p1023rdb.c
new file mode 100644
index 000000000..918398bd8
--- /dev/null
+++ b/board/freescale/p1023rdb/p1023rdb.c
@@ -0,0 +1,161 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Authors:  Roy Zang <tie-fei.zang@freescale.com>
+ *           Chunhe Lan <Chunhe.Lan@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_portals.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <netdev.h>
+#include <malloc.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/fsl_dtsec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+	fsl_lbc_t *lbc = LBC_BASE_ADDR;
+
+	/* Set ABSWP to implement conversion of addresses in the LBC */
+	setbits_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	printf("Board: P1023 RDB\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+	fsl_pcie_init_board(0);
+}
+#endif
+
+int board_early_init_r(void)
+{
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash + PROMJET region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash + promjet */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+		MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+	setup_portals();
+
+	return 0;
+}
+
+unsigned long get_board_sys_clk(ulong dummy)
+{
+	return gd->bus_clk;
+}
+
+unsigned long get_board_ddr_clk(ulong dummy)
+{
+	return gd->mem_clk;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	ccsr_gur_t *gur = (ccsr_gur_t *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	struct fsl_pq_mdio_info dtsec_mdio_info;
+
+	/*
+	 * Need to set dTSEC 1 pin multiplexing to TSEC. The default setting
+	 * is not correct.
+	 */
+	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TSEC1_1);
+
+	dtsec_mdio_info.regs =
+		(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
+	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+	/* Register the 1G MDIO bus */
+	fsl_pq_mdio_init(bis, &dtsec_mdio_info);
+
+	fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
+	fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
+
+	fm_info_set_mdio(FM1_DTSEC1,
+			 miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+	fm_info_set_mdio(FM1_DTSEC2,
+			 miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+
+#ifdef CONFIG_FMAN_ENET
+	cpu_eth_init(bis);
+#endif
+
+	return pci_eth_init(bis);
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+	fdt_fixup_dr_usb(blob, bd);
+#endif
+
+	fdt_fixup_fman_ethernet(blob);
+}
+#endif