1 files changed, 114 insertions, 0 deletions

diff --git a/board/freescale/mx25pdk/mx25pdk.c b/board/freescale/mx25pdk/mx25pdk.c
index 4a8352fb3..72fa6bc82 100644
--- a/board/freescale/mx25pdk/mx25pdk.c
+++ b/board/freescale/mx25pdk/mx25pdk.c
@@ -19,12 +19,71 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/imx25-pinmux.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/arch/clock.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <i2c.h>
+#include <pmic.h>
+#include <fsl_pmic.h>
+#include <mc34704.h>
+
+#define FEC_RESET_B		IMX_GPIO_NR(2, 3)
+#define FEC_ENABLE_B		IMX_GPIO_NR(4, 8)
+#define CARD_DETECT		IMX_GPIO_NR(2, 1)
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg[1] = {
+	{IMX_MMC_SDHC1_BASE},
+};
+#endif
+
+static void mx25pdk_fec_init(void)
+{
+	struct iomuxc_mux_ctl *muxctl;
+	struct iomuxc_pad_ctl *padctl;
+	u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5);
+	u32 gpio_mux_mode0_sion = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION;
+
+	/* FEC pin init is generic */
+	mx25_fec_init_pins();
+
+	muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
+	padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
+	/*
+	 * Set up FEC_RESET_B and FEC_ENABLE_B
+	 *
+	 * FEC_RESET_B: gpio2_3 is ALT 5 mode of pin D12
+	 * FEC_ENABLE_B: gpio4_8 is ALT 5 mode of pin A17
+	 */
+	writel(gpio_mux_mode, &muxctl->pad_d12);
+	writel(gpio_mux_mode, &muxctl->pad_a17);
+
+	writel(0x0, &padctl->pad_d12);
+	writel(0x0, &padctl->pad_a17);
+
+	/* Assert RESET and ENABLE low */
+	gpio_direction_output(FEC_RESET_B, 0);
+	gpio_direction_output(FEC_ENABLE_B, 0);
+
+	udelay(10);
+
+	/* Deassert RESET and ENABLE */
+	gpio_set_value(FEC_RESET_B, 1);
+	gpio_set_value(FEC_ENABLE_B, 1);
+
+	/* Setup I2C pins so that PMIC can turn on PHY supply */
+	writel(gpio_mux_mode0_sion, &muxctl->pad_i2c1_clk);
+	writel(gpio_mux_mode0_sion, &muxctl->pad_i2c1_dat);
+	writel(0x1E8, &padctl->pad_i2c1_clk);
+	writel(0x1E8, &padctl->pad_i2c1_dat);
+}
+
 int dram_init(void)
 {
 	/* dram_init must store complete ramsize in gd->ram_size */
@@ -48,6 +107,61 @@ int board_init(void)
 	return 0;
 }
 
+int board_late_init(void)
+{
+	struct pmic *p;
+
+	mx25pdk_fec_init();
+
+	pmic_init();
+	p = get_pmic();
+	/* Turn on Ethernet PHY supply */
+	pmic_reg_write(p, MC34704_GENERAL2_REG, ONOFFE);
+
+	return 0;
+}
+
+#ifdef CONFIG_FSL_ESDHC
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct iomuxc_mux_ctl *muxctl;
+	struct iomuxc_pad_ctl *padctl;
+	u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5);
+
+	/*
+	 * Set up the Card Detect pin.
+	 *
+	 * SD1_GPIO_CD: gpio2_1 is ALT 5 mode of pin A15
+	 *
+	 */
+	muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
+	padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
+
+	writel(gpio_mux_mode, &muxctl->pad_a15);
+	writel(0x0, &padctl->pad_a15);
+
+	gpio_direction_input(CARD_DETECT);
+	return !gpio_get_value(CARD_DETECT);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	struct iomuxc_mux_ctl *muxctl;
+	u32 sdhc1_mux_mode = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION;
+
+	muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
+	writel(sdhc1_mux_mode, &muxctl->pad_sd1_cmd);
+	writel(sdhc1_mux_mode, &muxctl->pad_sd1_clk);
+	writel(sdhc1_mux_mode, &muxctl->pad_sd1_data0);
+	writel(sdhc1_mux_mode, &muxctl->pad_sd1_data1);
+	writel(sdhc1_mux_mode, &muxctl->pad_sd1_data2);
+	writel(sdhc1_mux_mode, &muxctl->pad_sd1_data3);
+
+	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
+	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
+}
+#endif
+
 int checkboard(void)
 {
 	puts("Board: MX25PDK\n");