diff options
Diffstat (limited to 'board/esd/pmc440')
| -rw-r--r-- | board/esd/pmc440/cmd_pmc440.c | 2 | ||||
| -rw-r--r-- | board/esd/pmc440/pmc440.c | 57 |
2 files changed, 31 insertions, 28 deletions
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c index 7808d4d17..0fbc3dc23 100644 --- a/board/esd/pmc440/cmd_pmc440.c +++ b/board/esd/pmc440/cmd_pmc440.c @@ -242,7 +242,7 @@ int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) "address %08x\n", n, data, f); for (i=0; i<n; i++) - out32(f, data); + out_be32((void *)f, data); } } else { printf("Usage:\nfifo %s\n", cmdtp->help); diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index 382410534..2ab944ddf 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -107,31 +107,31 @@ int board_early_init_f(void) * Setup the GPIO pins * TODO: setup GPIOs via CONFIG_SYS_4xx_GPIO_TABLE in board's config file */ - out32(GPIO0_OR, 0x40000102); - out32(GPIO0_TCR, 0x4c90011f); - out32(GPIO0_OSRL, 0x28051400); - out32(GPIO0_OSRH, 0x55005000); - out32(GPIO0_TSRL, 0x08051400); - out32(GPIO0_TSRH, 0x55005000); - out32(GPIO0_ISR1L, 0x54000000); - out32(GPIO0_ISR1H, 0x00000000); - out32(GPIO0_ISR2L, 0x44000000); - out32(GPIO0_ISR2H, 0x00000100); - out32(GPIO0_ISR3L, 0x00000000); - out32(GPIO0_ISR3H, 0x00000000); + out_be32((void *)GPIO0_OR, 0x40000102); + out_be32((void *)GPIO0_TCR, 0x4c90011f); + out_be32((void *)GPIO0_OSRL, 0x28051400); + out_be32((void *)GPIO0_OSRH, 0x55005000); + out_be32((void *)GPIO0_TSRL, 0x08051400); + out_be32((void *)GPIO0_TSRH, 0x55005000); + out_be32((void *)GPIO0_ISR1L, 0x54000000); + out_be32((void *)GPIO0_ISR1H, 0x00000000); + out_be32((void *)GPIO0_ISR2L, 0x44000000); + out_be32((void *)GPIO0_ISR2H, 0x00000100); + out_be32((void *)GPIO0_ISR3L, 0x00000000); + out_be32((void *)GPIO0_ISR3H, 0x00000000); - out32(GPIO1_OR, 0x80002408); - out32(GPIO1_TCR, 0xd6003c08); - out32(GPIO1_OSRL, 0x0a5a0000); - out32(GPIO1_OSRH, 0x00000000); - out32(GPIO1_TSRL, 0x00000000); - out32(GPIO1_TSRH, 0x00000000); - out32(GPIO1_ISR1L, 0x00005555); - out32(GPIO1_ISR1H, 0x40000000); - out32(GPIO1_ISR2L, 0x04010000); - out32(GPIO1_ISR2H, 0x00000000); - out32(GPIO1_ISR3L, 0x01400000); - out32(GPIO1_ISR3H, 0x00000000); + out_be32((void *)GPIO1_OR, 0x80002408); + out_be32((void *)GPIO1_TCR, 0xd6003c08); + out_be32((void *)GPIO1_OSRL, 0x0a5a0000); + out_be32((void *)GPIO1_OSRH, 0x00000000); + out_be32((void *)GPIO1_TSRL, 0x00000000); + out_be32((void *)GPIO1_TSRH, 0x00000000); + out_be32((void *)GPIO1_ISR1L, 0x00005555); + out_be32((void *)GPIO1_ISR1H, 0x40000000); + out_be32((void *)GPIO1_ISR2L, 0x04010000); + out_be32((void *)GPIO1_ISR2H, 0x00000000); + out_be32((void *)GPIO1_ISR3L, 0x01400000); + out_be32((void *)GPIO1_ISR3H, 0x00000000); /* patch PLB:PCI divider for 66MHz PCI */ mfcpr(clk_spcid, reg); @@ -804,17 +804,20 @@ int eeprom_write_enable(unsigned dev_addr, int state) switch (state) { case 1: /* Enable write access, clear bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~GPIO0_EP_EEP); + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) & ~GPIO0_EP_EEP); state = 0; break; case 0: /* Disable write access, set bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) | GPIO0_EP_EEP); + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) | GPIO0_EP_EEP); state = 0; break; default: /* Read current status back. */ - state = (0 == (in32(GPIO0_OR) & GPIO0_EP_EEP)); + state = (0 == (in_be32((void *)GPIO0_OR) + & GPIO0_EP_EEP)); break; } } |