diff options
Diffstat (limited to 'board/ep7312/flash.c')
| -rw-r--r-- | board/ep7312/flash.c | 343 | 
1 files changed, 0 insertions, 343 deletions
| diff --git a/board/ep7312/flash.c b/board/ep7312/flash.c deleted file mode 100644 index 2ed9c9ad6..000000000 --- a/board/ep7312/flash.c +++ /dev/null @@ -1,343 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -#define FLASH_BANK_SIZE 0x1000000 -#define MAIN_SECT_SIZE  0x20000 - -flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - - -/*----------------------------------------------------------------------- - */ - -ulong flash_init (void) -{ -	int i, j; -	ulong size = 0; - -	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { -		ulong flashbase = 0; - -		flash_info[i].flash_id = -				(INTEL_MANUFACT & FLASH_VENDMASK) | -				(INTEL_ID_28F128J3 & FLASH_TYPEMASK); -		flash_info[i].size = FLASH_BANK_SIZE; -		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; -		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); -		if (i == 0) -			flashbase = PHYS_FLASH_1; -		else -			panic ("configured too many flash banks!\n"); -		for (j = 0; j < flash_info[i].sector_count; j++) { -			flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE; -		} -		size += flash_info[i].size; -	} - -	/* Protect monitor and environment sectors -	 */ -	flash_protect ( FLAG_PROTECT_SET, -			CONFIG_SYS_FLASH_BASE, -			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, -			&flash_info[0]); - -	flash_protect ( FLAG_PROTECT_SET, -			CONFIG_ENV_ADDR, -			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - -	return size; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ -	int i; - -	switch (info->flash_id & FLASH_VENDMASK) { -	case (INTEL_MANUFACT & FLASH_VENDMASK): -		printf ("Intel: "); -		break; -	default: -		printf ("Unknown Vendor "); -		break; -	} - -	switch (info->flash_id & FLASH_TYPEMASK) { -	case (INTEL_ID_28F128J3 & FLASH_TYPEMASK): -		printf ("28F128J3 (128Mbit)\n"); -		break; -	default: -		printf ("Unknown Chip Type\n"); -		goto Done; -		break; -	} - -	printf ("  Size: %ld MB in %d Sectors\n", -			info->size >> 20, info->sector_count); - -	printf ("  Sector Start Addresses:"); -	for (i = 0; i < info->sector_count; i++) { -		if ((i % 5) == 0) { -			printf ("\n   "); -		} -		printf (" %08lX%s", info->start[i], -				info->protect[i] ? " (RO)" : "     "); -	} -	printf ("\n"); - -Done:	; -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ -	int flag, prot, sect; -	int rc = ERR_OK; -	ulong start; - -	if (info->flash_id == FLASH_UNKNOWN) -		return ERR_UNKNOWN_FLASH_TYPE; - -	if ((s_first < 0) || (s_first > s_last)) { -		return ERR_INVAL; -	} - -	if ((info->flash_id & FLASH_VENDMASK) != -		(INTEL_MANUFACT & FLASH_VENDMASK)) { -		return ERR_UNKNOWN_FLASH_VENDOR; -	} - -	prot = 0; -	for (sect = s_first; sect <= s_last; ++sect) { -		if (info->protect[sect]) { -			prot++; -		} -	} -	if (prot) -		return ERR_PROTECTED; - -	/* -	 * Disable interrupts which might cause a timeout -	 * here. Remember that our exception vectors are -	 * at address 0 in the flash, and we don't want a -	 * (ticker) exception to happen while the flash -	 * chip is in programming mode. -	 */ -	flag = disable_interrupts (); - -	/* Start erase on unprotected sectors */ -	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - -		printf ("Erasing sector %2d ... ", sect); - -		/* arm simple, non interrupt dependent timer */ -		start = get_timer(0); - -		if (info->protect[sect] == 0) {	/* not protected */ -			vu_short *addr = (vu_short *) (info->start[sect]); - -			*addr = 0x20;		/* erase setup */ -			*addr = 0xD0;		/* erase confirm */ - -			while ((*addr & 0x80) != 0x80) { -				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { -					*addr = 0xB0;	/* suspend erase */ -					*addr = 0xFF;	/* reset to read mode */ -					rc = ERR_TIMOUT; -					goto outahere; -				} -			} - -			/* clear status register command */ -			*addr = 0x50; -			/* reset to read mode */ -			*addr = 0xFF; -		} -		printf ("ok.\n"); -	} -	if (ctrlc ()) -		printf ("User Interrupt!\n"); - -  outahere: - -	/* allow flash to settle - wait 10 ms */ -	udelay_masked (10000); - -	if (flag) -		enable_interrupts (); - -	return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash - */ - -static int write_word (flash_info_t * info, ulong dest, ushort data) -{ -	vu_short *addr = (vu_short *) dest, val; -	int rc = ERR_OK; -	int flag; -	ulong start; - -	/* Check if Flash is (sufficiently) erased -	 */ -	if ((*addr & data) != data) -		return ERR_NOT_ERASED; - -	/* -	 * Disable interrupts which might cause a timeout -	 * here. Remember that our exception vectors are -	 * at address 0 in the flash, and we don't want a -	 * (ticker) exception to happen while the flash -	 * chip is in programming mode. -	 */ -	flag = disable_interrupts (); - -	/* clear status register command */ -	*addr = 0x50; - -	/* program set-up command */ -	*addr = 0x40; - -	/* latch address/data */ -	*addr = data; - -	/* arm simple, non interrupt dependent timer */ -	start = get_timer(0); - -	/* wait while polling the status register */ -	while (((val = *addr) & 0x80) != 0x80) { -		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { -			rc = ERR_TIMOUT; -			/* suspend program command */ -			*addr = 0xB0; -			goto outahere; -		} -	} - -	if (val & 0x1A) {			/* check for error */ -		printf ("\nFlash write error %02x at address %08lx\n", -				(int) val, (unsigned long) dest); -		if (val & (1 << 3)) { -			printf ("Voltage range error.\n"); -			rc = ERR_PROG_ERROR; -			goto outahere; -		} -		if (val & (1 << 1)) { -			printf ("Device protect error.\n"); -			rc = ERR_PROTECTED; -			goto outahere; -		} -		if (val & (1 << 4)) { -			printf ("Programming error.\n"); -			rc = ERR_PROG_ERROR; -			goto outahere; -		} -		rc = ERR_PROG_ERROR; -		goto outahere; -	} - -  outahere: -	/* read array command */ -	*addr = 0xFF; - -	if (flag) -		enable_interrupts (); - -	return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ -	ulong cp, wp; -	ushort data; -	int l; -	int i, rc; - -	wp = (addr & ~1);			/* get lower word aligned address */ - -	/* -	 * handle unaligned start bytes -	 */ -	if ((l = addr - wp) != 0) { -		data = 0; -		for (i = 0, cp = wp; i < l; ++i, ++cp) { -			data = (data >> 8) | (*(uchar *) cp << 8); -		} -		for (; i < 2 && cnt > 0; ++i) { -			data = (data >> 8) | (*src++ << 8); -			--cnt; -			++cp; -		} -		for (; cnt == 0 && i < 2; ++i, ++cp) { -			data = (data >> 8) | (*(uchar *) cp << 8); -		} - -		if ((rc = write_word (info, wp, data)) != 0) { -			return (rc); -		} -		wp += 2; -	} - -	/* -	 * handle word aligned part -	 */ -	while (cnt >= 2) { -		data = *((vu_short *) src); -		if ((rc = write_word (info, wp, data)) != 0) { -			return (rc); -		} -		src += 2; -		wp += 2; -		cnt -= 2; -	} - -	if (cnt == 0) { -		return ERR_OK; -	} - -	/* -	 * handle unaligned tail bytes -	 */ -	data = 0; -	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { -		data = (data >> 8) | (*src++ << 8); -		--cnt; -	} -	for (; i < 2; ++i, ++cp) { -		data = (data >> 8) | (*(uchar *) cp << 8); -	} - -	return write_word (info, wp, data); -} |