diff options
Diffstat (limited to 'board/cm5200')
| -rw-r--r-- | board/cm5200/cm5200.c | 22 | ||||
| -rw-r--r-- | board/cm5200/cmd_cm5200.c | 8 |
2 files changed, 15 insertions, 15 deletions
diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c index 24e8db0c6..9e2f1a536 100644 --- a/board/cm5200/cm5200.c +++ b/board/cm5200/cm5200.c @@ -57,7 +57,7 @@ DECLARE_GLOBAL_DATA_PTR; static hw_id_t hw_id; -#ifndef CFG_RAMBOOT +#ifndef CONFIG_SYS_RAMBOOT /* * Helper function to initialize SDRAM controller. */ @@ -87,7 +87,7 @@ static void sdram_start(int hi_addr, mem_conf_t *mem_conf) /* normal operation */ *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | hi_addr_bit; } -#endif /* CFG_RAMBOOT */ +#endif /* CONFIG_SYS_RAMBOOT */ /* @@ -117,7 +117,7 @@ static mem_conf_t* get_mem_config(int board_type) phys_size_t initdram(int board_type) { ulong dramsize = 0; -#ifndef CFG_RAMBOOT +#ifndef CONFIG_SYS_RAMBOOT ulong test1, test2; mem_conf_t *mem_conf; @@ -131,9 +131,9 @@ phys_size_t initdram(int board_type) *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = mem_conf->config2; sdram_start(0, mem_conf); - test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); sdram_start(1, mem_conf); - test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); if (test1 > test2) { sdram_start(0, mem_conf); dramsize = test1; @@ -150,14 +150,14 @@ phys_size_t initdram(int board_type) __builtin_ffs(dramsize >> 20) - 1; } else *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ -#else /* CFG_RAMBOOT */ +#else /* CONFIG_SYS_RAMBOOT */ /* retrieve size of memory connected to SDRAM CS0 */ dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; if (dramsize >= 0x13) dramsize = (1 << (dramsize - 0x13)) << 20; else dramsize = 0; -#endif /* !CFG_RAMBOOT */ +#endif /* !CONFIG_SYS_RAMBOOT */ /* * On MPC5200B we need to set the special configuration delay in the @@ -178,7 +178,7 @@ static void read_hw_id(hw_id_t hw_id) { int i; for (i = 0; i < HW_ID_ELEM_COUNT; ++i) - if (i2c_read(CFG_I2C_EEPROM, + if (i2c_read(CONFIG_SYS_I2C_EEPROM, hw_id_format[i].offset, 2, (uchar *)&hw_id[i][0], @@ -298,7 +298,7 @@ int checkboard(void) * also use a little trick to silence I2C-related output. */ gd->flags |= GD_FLG_SILENT; - i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); gd->flags &= ~GD_FLG_SILENT; read_hw_id(hw_id_tmp); @@ -363,7 +363,7 @@ int misc_init_r(void) char hostname[MODULE_NAME_MAXLEN]; /* Read ethaddr from EEPROM */ - if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) { + if (i2c_read(CONFIG_SYS_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) { sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X", buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); /* Check if MAC addr is owned by Schindler */ @@ -377,7 +377,7 @@ int misc_init_r(void) } } else { printf(LOG_PREFIX "Warning - Unable to read MAC from I2C" - " device at address %02X:%04X\n", CFG_I2C_EEPROM, + " device at address %02X:%04X\n", CONFIG_SYS_I2C_EEPROM, CONFIG_MAC_OFFSET); } #endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */ diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c index 2201bdd8c..00f0671d7 100644 --- a/board/cm5200/cmd_cm5200.c +++ b/board/cm5200/cmd_cm5200.c @@ -39,18 +39,18 @@ int do_i2c(char *argv[]) getc(); temp = 0xf0; /* set io 0-4 as output */ - i2c_write(CFG_I2C_IO, 3, 1, (uchar *)&temp, 1); + i2c_write(CONFIG_SYS_I2C_IO, 3, 1, (uchar *)&temp, 1); printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n" "Press any key to stop\n\n"); while (!tstc()) { - i2c_read(CFG_I2C_IO, 0, 1, (uchar *)&temp, 1); + i2c_read(CONFIG_SYS_I2C_IO, 0, 1, (uchar *)&temp, 1); temp1 = (temp >> 4) & 0x03; temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */ temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */ temp = temp1; - i2c_write(CFG_I2C_IO, 1, 1, (uchar *)&temp, 1); + i2c_write(CONFIG_SYS_I2C_IO, 1, 1, (uchar *)&temp, 1); } getc(); @@ -392,7 +392,7 @@ int do_rs232(char *argv[]) error_status = 1; break; } - gpio->port_config |= (CFG_GPS_PORT_CONFIG & 0xFF0FF80F); + gpio->port_config |= (CONFIG_SYS_GPS_PORT_CONFIG & 0xFF0FF80F); return error_status; } |