diff options
Diffstat (limited to 'board/bf533-stamp/spi.c')
| -rw-r--r-- | board/bf533-stamp/spi.c | 39 |
1 files changed, 20 insertions, 19 deletions
diff --git a/board/bf533-stamp/spi.c b/board/bf533-stamp/spi.c index d30750faa..15141cf74 100644 --- a/board/bf533-stamp/spi.c +++ b/board/bf533-stamp/spi.c @@ -4,6 +4,7 @@ #include <common.h> #include <linux/ctype.h> #include <asm/io.h> +#include <asm/mach-common/bits/spi.h> #if defined(CONFIG_SPI) @@ -153,7 +154,7 @@ void SendSingleCommand(const int iCommand) /*sends the actual command to the SPI TX register */ *pSPI_TDBR = iCommand; - sync(); + SSYNC(); /*The SPI status register will be polled to check the SPIF bit */ Wait_For_SPIF(); @@ -174,7 +175,7 @@ void SetupSPI(const int spi_setting) *pSPI_FLG = 0xFB04; *pSPI_BAUD = CONFIG_SPI_BAUD; *pSPI_CTL = spi_setting; - sync(); + SSYNC(); } void SPI_OFF(void) @@ -183,7 +184,7 @@ void SPI_OFF(void) *pSPI_CTL = 0x0400; /* disable SPI */ *pSPI_FLG = 0; *pSPI_BAUD = 0; - sync(); + SSYNC(); udelay(CONFIG_CCLK_HZ / 50000000); } @@ -241,10 +242,10 @@ char ReadStatusRegister(void) SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); /* Turn on the SPI */ *pSPI_TDBR = SPI_RDSR; /* send instruction to read status register */ - sync(); + SSYNC(); Wait_For_SPIF(); /*wait until the instruction has been sent */ *pSPI_TDBR = 0; /*send dummy to receive the status register */ - sync(); + SSYNC(); Wait_For_SPIF(); /*wait until the data has been sent */ status_register = *pSPI_RDBR; /*read the status register */ @@ -305,18 +306,18 @@ ERROR_CODE EraseBlock(int nBlock) /* Send the erase block command to the flash followed by the 24 address */ /* to point to the start of a sector. */ *pSPI_TDBR = SPI_SE; - sync(); + SSYNC(); Wait_For_SPIF(); ShiftValue = (ulSectorOff >> 16); /* Send the highest byte of the 24 bit address at first */ *pSPI_TDBR = ShiftValue; - sync(); + SSYNC(); Wait_For_SPIF(); /* Wait until the instruction has been sent */ ShiftValue = (ulSectorOff >> 8); /* Send the middle byte of the 24 bit address at second */ *pSPI_TDBR = ShiftValue; - sync(); + SSYNC(); Wait_For_SPIF(); /* Wait until the instruction has been sent */ *pSPI_TDBR = ulSectorOff; /* Send the lowest byte of the 24 bit address finally */ - sync(); + SSYNC(); Wait_For_SPIF(); /* Wait until the instruction has been sent */ /*Turns off the SPI */ @@ -351,25 +352,25 @@ ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData) SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); *pSPI_TDBR = SPI_READ; /* Send the read command to SPI device */ - sync(); + SSYNC(); Wait_For_SPIF(); /* Wait until the instruction has been sent */ ShiftValue = (ulStart >> 16); /* Send the highest byte of the 24 bit address at first */ *pSPI_TDBR = ShiftValue; /* Send the byte to the SPI device */ - sync(); + SSYNC(); Wait_For_SPIF(); /* Wait until the instruction has been sent */ ShiftValue = (ulStart >> 8); /* Send the middle byte of the 24 bit address at second */ *pSPI_TDBR = ShiftValue; /* Send the byte to the SPI device */ - sync(); + SSYNC(); Wait_For_SPIF(); /* Wait until the instruction has been sent */ *pSPI_TDBR = ulStart; /* Send the lowest byte of the 24 bit address finally */ - sync(); + SSYNC(); Wait_For_SPIF(); /* Wait until the instruction has been sent */ /* After the SPI device address has been placed on the MOSI pin the data can be */ /* received on the MISO pin. */ for (i = 0; i < lCount; i++) { *pSPI_TDBR = 0; /*send dummy */ - sync(); + SSYNC(); while (!(*pSPI_STAT & RXS)) ; *cnData++ = *pSPI_RDBR; /*read */ @@ -406,26 +407,26 @@ ERROR_CODE WriteFlash(unsigned long ulStartAddr, long lTransferCount, /* Third, the 24 bit address will be shifted out the SPI MOSI bytewise. */ SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); /* Turns the SPI on */ *pSPI_TDBR = SPI_PP; - sync(); + SSYNC(); Wait_For_SPIF(); /*wait until the instruction has been sent */ ulWAddr = (ulStartAddr >> 16); *pSPI_TDBR = ulWAddr; - sync(); + SSYNC(); Wait_For_SPIF(); /*wait until the instruction has been sent */ ulWAddr = (ulStartAddr >> 8); *pSPI_TDBR = ulWAddr; - sync(); + SSYNC(); Wait_For_SPIF(); /*wait until the instruction has been sent */ ulWAddr = ulStartAddr; *pSPI_TDBR = ulWAddr; - sync(); + SSYNC(); Wait_For_SPIF(); /*wait until the instruction has been sent */ /* Fourth, maximum number of 256 bytes will be taken from the Buffer */ /* and sent to the SPI device. */ for (i = 0; (i < lTransferCount) && (i < 256); i++, lWTransferCount++) { iData = *temp; *pSPI_TDBR = iData; - sync(); + SSYNC(); Wait_For_SPIF(); /*wait until the instruction has been sent */ temp++; } |