diff options
Diffstat (limited to 'board/atmel/at91sam9263ek/at91sam9263ek.c')
| -rw-r--r-- | board/atmel/at91sam9263ek/at91sam9263ek.c | 85 | 
1 files changed, 8 insertions, 77 deletions
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index ebd464976..1d5284592 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -27,6 +27,7 @@  #include <asm/arch/at91sam9263.h>  #include <asm/arch/at91sam9263_matrix.h>  #include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h>  #include <asm/arch/at91_pmc.h>  #include <asm/arch/at91_rstc.h>  #include <asm/arch/gpio.h> @@ -46,33 +47,6 @@ DECLARE_GLOBAL_DATA_PTR;   * Miscelaneous platform dependent initialisations   */ -static void at91sam9263ek_serial_hw_init(void) -{ -#ifdef CONFIG_USART0 -	at91_set_A_periph(AT91_PIN_PA26, 1);		/* TXD0 */ -	at91_set_A_periph(AT91_PIN_PA27, 0);		/* RXD0 */ -	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0); -#endif - -#ifdef CONFIG_USART1 -	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */ -	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */ -	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US1); -#endif - -#ifdef CONFIG_USART2 -	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */ -	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */ -	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US2); -#endif - -#ifdef CONFIG_USART3	/* DBGU */ -	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */ -	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */ -	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); -#endif -} -  #ifdef CONFIG_CMD_NAND  static void at91sam9263ek_nand_hw_init(void)  { @@ -106,24 +80,10 @@ static void at91sam9263ek_nand_hw_init(void)  				      1 << AT91SAM9263_ID_PIOCDE);  	/* Configure RDY/BSY */ -	at91_set_gpio_input(AT91_PIN_PA22, 1); +	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);  	/* Enable NandFlash */ -	at91_set_gpio_output(AT91_PIN_PD15, 1); -} -#endif - -#ifdef CONFIG_HAS_DATAFLASH -static void at91sam9263ek_spi_hw_init(void) -{ -	at91_set_B_periph(AT91_PIN_PA5, 0);	/* SPI0_NPCS0 */ - -	at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */ -	at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */ -	at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */ - -	/* Enable clock */ -	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0); +	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);  }  #endif @@ -169,37 +129,7 @@ static void at91sam9263ek_macb_hw_init(void)  	       pin_to_mask(AT91_PIN_PE26),  	       pin_to_controller(AT91_PIN_PE0) + PIO_PUER); -	at91_set_A_periph(AT91_PIN_PE21, 0);	/* ETXCK_EREFCK */ -	at91_set_B_periph(AT91_PIN_PC25, 0);	/* ERXDV */ -	at91_set_A_periph(AT91_PIN_PE25, 0);	/* ERX0 */ -	at91_set_A_periph(AT91_PIN_PE26, 0);	/* ERX1 */ -	at91_set_A_periph(AT91_PIN_PE27, 0);	/* ERXER */ -	at91_set_A_periph(AT91_PIN_PE28, 0);	/* ETXEN */ -	at91_set_A_periph(AT91_PIN_PE23, 0);	/* ETX0 */ -	at91_set_A_periph(AT91_PIN_PE24, 0);	/* ETX1 */ -	at91_set_A_periph(AT91_PIN_PE30, 0);	/* EMDIO */ -	at91_set_A_periph(AT91_PIN_PE29, 0);	/* EMDC */ - -#ifndef CONFIG_RMII -	at91_set_A_periph(AT91_PIN_PE22, 0);	/* ECRS */ -	at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */ -	at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */ -	at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */ -	at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */ -	at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */ -	at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */ -	at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */ -#endif - -} -#endif - -#ifdef CONFIG_USB_OHCI_NEW -static void at91sam9263ek_uhp_hw_init(void) -{ -	/* Enable VBus on UHP ports */ -	at91_set_gpio_output(AT91_PIN_PA21, 0); -	at91_set_gpio_output(AT91_PIN_PA24, 0); +	at91_macb_hw_init();  }  #endif @@ -301,18 +231,19 @@ int board_init(void)  	/* adress of boot parameters */  	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; -	at91sam9263ek_serial_hw_init(); +	at91_serial_hw_init();  #ifdef CONFIG_CMD_NAND  	at91sam9263ek_nand_hw_init();  #endif  #ifdef CONFIG_HAS_DATAFLASH -	at91sam9263ek_spi_hw_init(); +	at91_set_gpio_output(AT91_PIN_PE20, 1);	/* select spi0 clock */ +	at91_spi0_hw_init(1 << 0);  #endif  #ifdef CONFIG_MACB  	at91sam9263ek_macb_hw_init();  #endif  #ifdef CONFIG_USB_OHCI_NEW -	at91sam9263ek_uhp_hw_init(); +	at91_uhp_hw_init();  #endif  #ifdef CONFIG_LCD  	at91sam9263ek_lcd_hw_init();  |