diff options
Diffstat (limited to 'board/atmel/at91sam9263ek/at91sam9263ek.c')
| -rw-r--r-- | board/atmel/at91sam9263ek/at91sam9263ek.c | 50 |
1 files changed, 45 insertions, 5 deletions
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 927fc912c..ebd464976 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -31,11 +31,13 @@ #include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> #include <asm/arch/io.h> +#include <asm/arch/hardware.h> #include <lcd.h> #include <atmel_lcdc.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include <net.h> #endif +#include <netdev.h> DECLARE_GLOBAL_DATA_PTR; @@ -49,19 +51,19 @@ static void at91sam9263ek_serial_hw_init(void) #ifdef CONFIG_USART0 at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0); #endif #ifdef CONFIG_USART1 at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US1); #endif #ifdef CONFIG_USART2 at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US2); #endif #ifdef CONFIG_USART3 /* DBGU */ @@ -93,9 +95,9 @@ static void at91sam9263ek_nand_hw_init(void) at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | -#ifdef CFG_NAND_DBW_16 +#ifdef CONFIG_SYS_NAND_DBW_16 AT91_SMC_DBW_16 | -#else /* CFG_NAND_DBW_8 */ +#else /* CONFIG_SYS_NAND_DBW_8 */ AT91_SMC_DBW_8 | #endif AT91_SMC_TDF_(2)); @@ -258,6 +260,35 @@ static void at91sam9263ek_lcd_hw_init(void) gd->fb_base = AT91SAM9263_SRAM0_BASE; } + +#ifdef CONFIG_LCD_INFO +#include <nand.h> +#include <version.h> + +void lcd_show_board_info(void) +{ + ulong dram_size, nand_size; + int i; + char temp[32]; + + lcd_printf ("%s\n", U_BOOT_VERSION); + lcd_printf ("(C) 2008 ATMEL Corp\n"); + lcd_printf ("at91support@atmel.com\n"); + lcd_printf ("%s CPU at %s MHz\n", + AT91_CPU_NAME, + strmhz(temp, AT91_CPU_CLOCK)); + + dram_size = 0; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) + dram_size += gd->bd->bi_dram[i].size; + nand_size = 0; + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) + nand_size += nand_info[i].size; + lcd_printf (" %ld MB SDRAM, %ld MB NAND\n", + dram_size >> 20, + nand_size >> 20 ); +} +#endif /* CONFIG_LCD_INFO */ #endif int board_init(void) @@ -308,3 +339,12 @@ void reset_phy(void) #endif } #endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x00); +#endif + return rc; +} |