diff options
Diffstat (limited to 'board/armltd/vexpress/vexpress_common.c')
| -rw-r--r-- | board/armltd/vexpress/vexpress_common.c | 274 | 
1 files changed, 274 insertions, 0 deletions
| diff --git a/board/armltd/vexpress/vexpress_common.c b/board/armltd/vexpress/vexpress_common.c new file mode 100644 index 000000000..2c54869e2 --- /dev/null +++ b/board/armltd/vexpress/vexpress_common.c @@ -0,0 +1,274 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> + * + * (C) Copyright 2003 + * Texas Instruments, <www.ti.com> + * Kshitij Gupta <Kshitij@ti.com> + * + * (C) Copyright 2004 + * ARM Ltd. + * Philippe Robin, <philippe.robin@arm.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <netdev.h> +#include <asm/io.h> +#include <asm/arch/systimer.h> +#include <asm/arch/sysctrl.h> +#include <asm/arch/wdt.h> +#include "../drivers/mmc/arm_pl180_mmci.h" + +static ulong timestamp; +static ulong lastdec; + +static struct systimer *systimer_base = (struct systimer *)V2M_TIMER01; +static struct sysctrl *sysctrl_base = (struct sysctrl *)SCTL_BASE; + +static void flash__init(void); +static void vexpress_timer_init(void); +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_SHOW_BOOT_PROGRESS) +void show_boot_progress(int progress) +{ +	printf("Boot reached stage %d\n", progress); +} +#endif + +static inline void delay(ulong loops) +{ +	__asm__ volatile ("1:\n" +		"subs %0, %1, #1\n" +		"bne 1b" : "=r" (loops) : "0" (loops)); +} + +int board_init(void) +{ +	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; +	gd->bd->bi_arch_number = MACH_TYPE_VEXPRESS; +	gd->flags = 0; + +	icache_enable(); +	flash__init(); +	vexpress_timer_init(); + +	return 0; +} + +int board_eth_init(bd_t *bis) +{ +	int rc = 0; +#ifdef CONFIG_SMC911X +	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); +#endif +	return rc; +} + +int cpu_mmc_init(bd_t *bis) +{ +	int rc = 0; +	(void) bis; +#ifdef CONFIG_ARM_PL180_MMCI +	struct pl180_mmc_host *host; + +	host = malloc(sizeof(struct pl180_mmc_host)); +	if (!host) +		return -ENOMEM; +	memset(host, 0, sizeof(*host)); + +	strcpy(host->name, "MMC"); +	host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE; +	host->pwr_init = INIT_PWR; +	host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN; +	host->voltages = VOLTAGE_WINDOW_MMC; +	host->caps = 0; +	host->clock_in = ARM_MCLK; +	host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1)); +	host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ; +	rc = arm_pl180_mmci_init(host); +#endif +	return rc; +} + +static void flash__init(void) +{ +	/* Setup the sytem control register to allow writing to flash */ +	writel(readl(&sysctrl_base->scflashctrl) | VEXPRESS_FLASHPROG_FLVPPEN, +	       &sysctrl_base->scflashctrl); +} + +int dram_init(void) +{ +	gd->ram_size = +		get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); +	return 0; +} + +void dram_init_banksize(void) +{ +	gd->bd->bi_dram[0].start = PHYS_SDRAM_1; +	gd->bd->bi_dram[0].size = +			get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); +	gd->bd->bi_dram[1].start = PHYS_SDRAM_2; +	gd->bd->bi_dram[1].size = +			get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); +} + +int timer_init(void) +{ +	return 0; +} + +/* + * Start timer: + *    Setup a 32 bit timer, running at 1KHz + *    Versatile Express Motherboard provides 1 MHz timer + */ +static void vexpress_timer_init(void) +{ +	/* +	 * Set clock frequency in system controller: +	 *   VEXPRESS_REFCLK is 32KHz +	 *   VEXPRESS_TIMCLK is 1MHz +	 */ +	writel(SP810_TIMER0_ENSEL | SP810_TIMER1_ENSEL | +	       SP810_TIMER2_ENSEL | SP810_TIMER3_ENSEL | +	       readl(&sysctrl_base->scctrl), &sysctrl_base->scctrl); + +	/* +	 * Set Timer0 to be: +	 *   Enabled, free running, no interrupt, 32-bit, wrapping +	 */ +	writel(SYSTIMER_RELOAD, &systimer_base->timer0load); +	writel(SYSTIMER_RELOAD, &systimer_base->timer0value); +	writel(SYSTIMER_EN | SYSTIMER_32BIT | +	       readl(&systimer_base->timer0control), +	       &systimer_base->timer0control); + +	reset_timer_masked(); +} + +int v2m_cfg_write(u32 devfn, u32 data) +{ +	/* Configuration interface broken? */ +	u32 val; + +	devfn |= SYS_CFG_START | SYS_CFG_WRITE; + +	val = readl(V2M_SYS_CFGSTAT); +	writel(val & ~SYS_CFG_COMPLETE, V2M_SYS_CFGSTAT); + +	writel(data, V2M_SYS_CFGDATA); +	writel(devfn, V2M_SYS_CFGCTRL); + +	do { +		val = readl(V2M_SYS_CFGSTAT); +	} while (val == 0); + +	return !!(val & SYS_CFG_ERR); +} + +/* Use the ARM Watchdog System to cause reset */ +void reset_cpu(ulong addr) +{ +	if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0)) +		printf("Unable to reboot\n"); +} + +/* + * Delay x useconds AND perserve advance timstamp value + *     assumes timer is ticking at 1 msec + */ +void __udelay(ulong usec) +{ +	ulong tmo, tmp; + +	tmo = usec / 1000; +	tmp = get_timer(0);	/* get current timestamp */ + +	/* +	 * If setting this forward will roll time stamp	then +	 * reset "advancing" timestamp to 0 and set lastdec value +	 * otherwise set the advancing stamp to the wake up time +	 */ +	if ((tmo + tmp + 1) < tmp) +		reset_timer_masked(); +	else +		tmo += tmp; + +	while (get_timer_masked() < tmo) +		; /* loop till wakeup event */ +} + +ulong get_timer(ulong base) +{ +	return get_timer_masked() - base; +} + +void reset_timer_masked(void) +{ +	lastdec = readl(&systimer_base->timer0value) / 1000; +	timestamp = 0; +} + +ulong get_timer_masked(void) +{ +	ulong now = readl(&systimer_base->timer0value) / 1000; + +	if (lastdec >= now) {	/* normal mode (non roll) */ +		timestamp += lastdec - now; +	} else {		/* count down timer overflowed */ +		/* +		 * nts = ts + ld - now +		 * ts = old stamp, ld = time before passing through - 1 +		 * now = amount of time after passing though - 1 +		 * nts = new "advancing time stamp" +		 */ +		timestamp += lastdec + SYSTIMER_RELOAD - now; +	} +	lastdec = now; + +	return timestamp; +} + +void lowlevel_init(void) +{ +} + +ulong get_board_rev(void){ +	return readl((u32 *)SYS_ID); +} + +unsigned long long get_ticks(void) +{ +	return get_timer(0); +} + +ulong get_tbclk(void) +{ +	return (ulong)CONFIG_SYS_HZ; +} |