diff options
Diffstat (limited to 'board/amcc/sequoia')
| -rw-r--r-- | board/amcc/sequoia/sdram.c | 29 | ||||
| -rw-r--r-- | board/amcc/sequoia/sequoia.c | 14 |
2 files changed, 33 insertions, 10 deletions
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c index 77f143844..d045df187 100644 --- a/board/amcc/sequoia/sdram.c +++ b/board/amcc/sequoia/sdram.c @@ -6,7 +6,7 @@ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com * - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -371,6 +371,14 @@ void denali_core_search_data_eye(unsigned long memory_size) } #endif /* CONFIG_DDR_DATA_EYE */ +#if defined(CONFIG_NAND_SPL) +/* Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big + * for the 4k NAND boot image so define bus_frequency to 133MHz here + * which is save for the refresh counter setup. + */ +#define get_bus_freq(val) 133000000 +#endif + /************************************************************************* * * initdram -- 440EPx's DDR controller is a DENALI Core @@ -379,16 +387,18 @@ void denali_core_search_data_eye(unsigned long memory_size) long int initdram (int board_type) { #if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) + ulong speed = get_bus_freq(0); + mtsdram(DDR0_02, 0x00000000); mtsdram(DDR0_00, 0x0000190A); mtsdram(DDR0_01, 0x01000000); mtsdram(DDR0_03, 0x02030602); - mtsdram(DDR0_04, 0x13030300); - mtsdram(DDR0_05, 0x0202050E); - mtsdram(DDR0_06, 0x0104C823); + mtsdram(DDR0_04, 0x0A020200); + mtsdram(DDR0_05, 0x02020308); + mtsdram(DDR0_06, 0x0102C812); mtsdram(DDR0_07, 0x000D0100); - mtsdram(DDR0_08, 0x02360001); + mtsdram(DDR0_08, 0x02430001); mtsdram(DDR0_09, 0x00011D5F); mtsdram(DDR0_10, 0x00000300); mtsdram(DDR0_11, 0x0027C800); @@ -402,13 +412,16 @@ long int initdram (int board_type) mtsdram(DDR0_22, 0x00267F0B); mtsdram(DDR0_23, 0x00000000); mtsdram(DDR0_24, 0x01010002); - mtsdram(DDR0_26, 0x5B260181); + if (speed > 133333334) + mtsdram(DDR0_26, 0x5B26050C); + else + mtsdram(DDR0_26, 0x5B260408); mtsdram(DDR0_27, 0x0000682B); mtsdram(DDR0_28, 0x00000000); mtsdram(DDR0_31, 0x00000000); mtsdram(DDR0_42, 0x01000006); - mtsdram(DDR0_43, 0x050A0200); - mtsdram(DDR0_44, 0x00000005); + mtsdram(DDR0_43, 0x030A0200); + mtsdram(DDR0_44, 0x00000003); mtsdram(DDR0_02, 0x00000001); wait_for_dlllock(); diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index b2b82c759..870401458 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -132,6 +132,12 @@ int board_early_init_f(void) (0x80000000 >> (28 + CFG_NAND_CS)); mtsdr(SDR0_CUST0, sdr0_cust0); + /* Update EBC speed after booting from i2c bootstrap settings + * on newer boards with 33.333 MHZ Clocks + */ + if (in8(CFG_BCSR_BASE + 3) & 0x80) + mtcpr(0xe0, 0x02000000); + return 0; } @@ -336,6 +342,10 @@ int misc_init_r(void) } #endif /* CONFIG_440EPX */ + mfsdr(SDR0_SRST1, reg); /* enable security/kasumi engines */ + reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0); + mtsdr(SDR0_SRST1, reg); + /* * Clear PLB4A0_ACR[WRP] * This fix will make the MAL burst disabling patch for the Linux @@ -359,8 +369,8 @@ int checkboard(void) printf("Board: Rainier - AMCC PPC440GRx Evaluation Board"); #endif - rev = *(u8 *)(CFG_CPLD + 0); - val = *(u8 *)(CFG_CPLD + 5) & 0x01; + rev = in8(CFG_BCSR_BASE + 0); + val = in8(CFG_BCSR_BASE + 5) & 0x01; printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33); if (s != NULL) { |