diff options
Diffstat (limited to 'board/BuS/eb_cpu5282/flash.c')
| -rw-r--r-- | board/BuS/eb_cpu5282/flash.c | 415 | 
1 files changed, 0 insertions, 415 deletions
| diff --git a/board/BuS/eb_cpu5282/flash.c b/board/BuS/eb_cpu5282/flash.c deleted file mode 100644 index 8b7f9578f..000000000 --- a/board/BuS/eb_cpu5282/flash.c +++ /dev/null @@ -1,415 +0,0 @@ -/* - * (C) Copyright 2005 - * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de> - * - * Based On - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include  "cfm_flash.h" - -#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE -#define FLASH_BANK_SIZE 0x200000 - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -void flash_print_info (flash_info_t * info) -{ -	int i; - -	switch (info->flash_id & FLASH_VENDMASK) { -	case (AMD_MANUFACT & FLASH_VENDMASK): -		printf ("AMD: "); -		switch (info->flash_id & FLASH_TYPEMASK) { -		case (AMD_ID_LV160B & FLASH_TYPEMASK): -			printf ("AM29LV160B (16Bit)\n"); -			break; -		default: -			printf ("Unknown Chip Type\n"); -			break; -		} -		break; -	case FREESCALE_MANUFACT & FLASH_VENDMASK: -		cfm_flash_print_info (info); -		break; -	default: -		printf ("Unknown Vendor "); -		break; -	} - -	puts ("  Size: "); -	if ((info->size >> 20) > 0) -	{ -		printf ("%ld MiB",info->size >> 20); -	} -	else -	{ -		printf ("%ld KiB",info->size >> 10); -	} -	printf (" in %d Sectors\n", info->sector_count); - -	printf ("  Sector Start Addresses:"); -	for (i = 0; i < info->sector_count; i++) { -		if ((i % 4) == 0) { -			printf ("\n    "); -		} -		printf ("%02d: %08lX%s  ", i,info->start[i], -			info->protect[i] ? " P" : "  "); -	} -	printf ("\n\n"); -} - -unsigned long flash_init (void) -{ -	int i, j; -	ulong size = 0; - -	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { -		ulong flashbase = 0; - -		switch (i) -		{ -		case 1: -			flash_info[i].flash_id = -				(AMD_MANUFACT & FLASH_VENDMASK) | -				(AMD_ID_LV160B & FLASH_TYPEMASK); -			flash_info[i].size = FLASH_BANK_SIZE; -			flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; -			memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); -			flashbase = PHYS_FLASH_1; -			for (j = 0; j < flash_info[i].sector_count; j++) { -				if (j == 0) { -					/* 1st is 16 KiB */ -					flash_info[i].start[j] = flashbase; -				} -				if ((j >= 1) && (j <= 2)) { -				/* 2nd and 3rd are 8 KiB */ -					flash_info[i].start[j] = -						flashbase + 0x4000 + 0x2000 * (j - 1); -				} -				if (j == 3) { -					/* 4th is 32 KiB */ -					flash_info[i].start[j] = flashbase + 0x8000; -				} -				if ((j >= 4) && (j <= 34)) { -					/* rest is 256 KiB */ -					flash_info[i].start[j] = -						flashbase + 0x10000 + 0x10000 * (j - 4); -				} -			} -			break; -		case 0: -			cfm_flash_init (&flash_info[i]); -			break; -		default: -			panic ("configured to many flash banks!\n"); -		} - -		size += flash_info[i].size; -	} - -	flash_protect (FLAG_PROTECT_SET, -		       CONFIG_SYS_FLASH_BASE, -		       CONFIG_SYS_FLASH_BASE + 0xffff, &flash_info[0]); - -	return size; -} - -#define CMD_READ_ARRAY		0x00F0 -#define CMD_UNLOCK1		0x00AA -#define CMD_UNLOCK2		0x0055 -#define CMD_ERASE_SETUP		0x0080 -#define CMD_ERASE_CONFIRM	0x0030 -#define CMD_PROGRAM		0x00A0 -#define CMD_UNLOCK_BYPASS	0x0020 - -#define MEM_FLASH_ADDR1		(*(volatile u16 *)(info->start[0] + (0x00000555<<1))) -#define MEM_FLASH_ADDR2		(*(volatile u16 *)(info->start[0] + (0x000002AA<<1))) - - -#define BIT_ERASE_DONE		0x0080 -#define BIT_RDY_MASK		0x0080 -#define BIT_PROGRAM_ERROR	0x0020 -#define BIT_TIMEOUT		0x80000000	/* our flag */ - -#define ERR_READY -1 - -int amd_flash_erase_sector(flash_info_t * info, int sector) -{ -	int state; -	ulong result; -	ulong start; - -	volatile u16 *addr = -				(volatile u16 *) (info->start[sector]); - -	MEM_FLASH_ADDR1 = CMD_UNLOCK1; -	MEM_FLASH_ADDR2 = CMD_UNLOCK2; -	MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - -	MEM_FLASH_ADDR1 = CMD_UNLOCK1; -	MEM_FLASH_ADDR2 = CMD_UNLOCK2; -	*addr = CMD_ERASE_CONFIRM; - -	/* wait until flash is ready */ -	state = 0; -	start = get_timer(0); - -	do { -		result = *addr; - -		/* check timeout */ -		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { -			MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -			state = ERR_TIMOUT; -		} - -		if (!state && (result & 0xFFFF) & BIT_ERASE_DONE) -			state = ERR_READY; -	} -	while (!state); -	if (state == ERR_READY) -		state = ERR_OK; - -	MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - -	return state; -} - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ -	int iflag, cflag; -	int sector; -	int rc; - -	rc = ERR_OK; - -	if (info->flash_id == FLASH_UNKNOWN) -	{ -		rc = ERR_UNKNOWN_FLASH_TYPE; -	} /* (info->flash_id == FLASH_UNKNOWN) */ - -	if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count) -	{ -		rc = ERR_INVAL; -	} - -	cflag = icache_status (); -	icache_disable (); -	iflag = disable_interrupts (); - -	for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) { - -		if (info->protect[sector]) -		{ -			putc('P'); /*  protected sector will not erase */ -		} -		else -		{ -			/* erase on unprotected sector */ -			puts("E\b"); -			switch (info->flash_id & FLASH_VENDMASK) -			{ -			case (AMD_MANUFACT & FLASH_VENDMASK): -				rc = amd_flash_erase_sector(info,sector); -				break; -			case (FREESCALE_MANUFACT & FLASH_VENDMASK): -				rc = cfm_flash_erase_sector(info,sector); -				break; -			default: -				return ERR_UNKNOWN_FLASH_VENDOR; -			} -			putc('.'); -		} -	} -	if (rc!=ERR_OK) -	{ -		printf ("\n   "); -		flash_perror (rc); -	} -	else -	{ -		printf (" done\n"); -	} - -	udelay (10000);	/* allow flash to settle - wait 10 ms */ - -	if (iflag) -		enable_interrupts (); - -	if (cflag) -		icache_enable (); - -	return rc; -} - -volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data) -{ -	volatile u16 *addr; -	ulong result; -	int cflag, iflag; -	int state; -	ulong start; - -	/* -	 * Check if Flash is (sufficiently) erased -	 */ -	addr = (volatile u16 *) dest; - -	result = *addr; -	if ((result & data) != data) -		return ERR_NOT_ERASED; - -	/* -	 * Disable interrupts which might cause a timeout -	 * here. Remember that our exception vectors are -	 * at address 0 in the flash, and we don't want a -	 * (ticker) exception to happen while the flash -	 * chip is in programming mode. -	 */ - -	cflag = icache_status (); -	icache_disable (); -	iflag = disable_interrupts (); - -	MEM_FLASH_ADDR1 = CMD_UNLOCK1; -	MEM_FLASH_ADDR2 = CMD_UNLOCK2; -	MEM_FLASH_ADDR1 = CMD_PROGRAM; -	*addr = data; - -	/* arm simple, non interrupt dependent timer */ -	start = get_timer(0); - -	/* wait until flash is ready */ -	state = 0; -	do { -		result = *addr; - -		/* check timeout */ -		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { -				state = ERR_TIMOUT; -		} -		if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK))) -			state = ERR_READY; - -	} while (!state); - -	*addr = CMD_READ_ARRAY; - -	if (state == ERR_READY) -		state = ERR_OK; -	if ((*addr != data) && (state != ERR_TIMOUT)) -		state = ERR_PROG_ERROR; - -	if (iflag) -		enable_interrupts (); - -	if (cflag) -		icache_enable (); - -	return state; -} - -int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ -	int rc; -	ulong dest; -	u16 data; - -	rc = ERR_OK; -	if (addr & 1) -	{ -		debug ("Byte alignment not supported\n"); -		rc = ERR_ALIGN; -	} -	if (cnt & 1) -	{ -		debug ("Byte transfer not supported\n"); -		rc = ERR_ALIGN; -	} - -	dest = addr; -	while ((cnt>=2) && (rc == ERR_OK)) -	{ -		data = *((volatile u16 *) src); -		rc=amd_write_word (info,dest,data); -		src +=2; -		dest +=2; -		cnt -=2; -	} -	return rc; -} - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ -	int rc; - -	switch (info->flash_id & FLASH_VENDMASK) -	{ -		case (AMD_MANUFACT & FLASH_VENDMASK): -			rc = amd_flash_write_buff(info,src,addr,cnt); -			break; -		case (FREESCALE_MANUFACT & FLASH_VENDMASK): -			rc = cfm_flash_write_buff(info,src,addr,cnt); -			break; -		default: -			rc = ERR_UNKNOWN_FLASH_VENDOR; -	} -	return rc; - -} -int amd_flash_protect(flash_info_t * info,long sector,int prot) -{ -	int rc; -	rc= ERR_OK; -	if (prot) -	{ -		info->protect[sector]=1; -	} -	else -	{ -		info->protect[sector]=0; -	} -	return rc; -} - -#ifdef CONFIG_SYS_FLASH_PROTECTION - -int flash_real_protect(flash_info_t * info,long sector,int prot) -{ -	int rc; - -	switch (info->flash_id & FLASH_VENDMASK) -	{ -		case (AMD_MANUFACT & FLASH_VENDMASK): -			rc = amd_flash_protect(info,sector,prot); -			break; -		case (FREESCALE_MANUFACT & FLASH_VENDMASK): -			rc = cfm_flash_protect(info,sector,prot); -			break; -		default: -			rc = ERR_UNKNOWN_FLASH_VENDOR; -	} -	return rc; -} - -#endif |