diff options
Diffstat (limited to 'arch')
128 files changed, 1748 insertions, 1210 deletions
diff --git a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg new file mode 100644 index 000000000..811876736 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg @@ -0,0 +1,6 @@ +SECTION 0x0 BOOTABLE + TAG LAST + LOAD 0x0 spl/u-boot-spl.bin + CALL 0x14 0x0 + LOAD 0x40000100 u-boot.bin + CALL 0x40000100 0x0 diff --git a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg new file mode 100644 index 000000000..ea772f0c8 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg @@ -0,0 +1,8 @@ +SECTION 0x0 BOOTABLE + TAG LAST + LOAD 0x0 spl/u-boot-spl.bin + LOAD IVT 0x8000 0x14 + CALL HAB 0x8000 0x0 + LOAD 0x40000100 u-boot.bin + LOAD IVT 0x8000 0x40000100 + CALL HAB 0x8000 0x0 diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index e3b6cd95f..f35795905 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -36,7 +36,7 @@ static void mxs_power_clock2pll(void) CLKCTRL_CLKSEQ_BYPASS_CPU); } -static void mxs_power_clear_auto_restart(void) +static void mxs_power_set_auto_restart(void) { struct mxs_rtc_regs *rtc_regs = (struct mxs_rtc_regs *)MXS_RTC_BASE; @@ -49,10 +49,7 @@ static void mxs_power_clear_auto_restart(void) while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_CLKGATE) ; - /* - * Due to the hardware design bug of mx28 EVK-A - * we need to set the AUTO_RESTART bit. - */ + /* Do nothing if flag already set */ if (readl(&rtc_regs->hw_rtc_persistent0) & RTC_PERSISTENT0_AUTO_RESTART) return; @@ -911,7 +908,7 @@ void mxs_power_init(void) mxs_ungate_power(); mxs_power_clock2xtal(); - mxs_power_clear_auto_restart(); + mxs_power_set_auto_restart(); mxs_power_set_linreg(); mxs_power_setup_5v_detect(); diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c index 4a3fca56a..e55e1c660 100644 --- a/arch/arm/cpu/armv7/at91/sama5d3_devices.c +++ b/arch/arm/cpu/armv7/at91/sama5d3_devices.c @@ -144,6 +144,30 @@ void at91_macb_hw_init(void) /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_EMAC); } + +void at91_gmac_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* GTX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* GTX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* GTX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* GTX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* GRX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* GRX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* GRX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* GRX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* GTXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* GTXEN */ + + at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* GRXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* GRXER */ + + at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* GMDC */ + at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* GMDIO */ + at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* G125CK */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_GMAC); +} #endif #ifdef CONFIG_LCD diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index fbbb365cb..6bef25445 100644 --- a/arch/arm/cpu/armv7/mx5/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -85,7 +85,7 @@ void set_usboh3_clk(void) MXC_CCM_CSCDR1_USBOH3_CLK_PODF(1)); } -void enable_usboh3_clk(unsigned char enable) +void enable_usboh3_clk(bool enable) { unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; @@ -122,7 +122,7 @@ void set_usb_phy_clk(void) } #if defined(CONFIG_MX51) -void enable_usb_phy1_clk(unsigned char enable) +void enable_usb_phy1_clk(bool enable) { unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; @@ -131,12 +131,12 @@ void enable_usb_phy1_clk(unsigned char enable) MXC_CCM_CCGR2_USB_PHY(cg)); } -void enable_usb_phy2_clk(unsigned char enable) +void enable_usb_phy2_clk(bool enable) { /* i.MX51 has a single USB PHY clock, so do nothing here. */ } #elif defined(CONFIG_MX53) -void enable_usb_phy1_clk(unsigned char enable) +void enable_usb_phy1_clk(bool enable) { unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; @@ -145,7 +145,7 @@ void enable_usb_phy1_clk(unsigned char enable) MXC_CCM_CCGR4_USB_PHY1(cg)); } -void enable_usb_phy2_clk(unsigned char enable) +void enable_usb_phy2_clk(bool enable) { unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile index c5e98582d..6d736174d 100644 --- a/arch/arm/cpu/armv7/mx6/Makefile +++ b/arch/arm/cpu/armv7/mx6/Makefile @@ -11,10 +11,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS = soc.o clock.o +COBJS-y = soc.o clock.o +COBJS-$(CONFIG_SECURE_BOOT) += hab.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) all: $(obj).depend $(LIB) diff --git a/arch/arm/cpu/armv7/mx6/hab.c b/arch/arm/cpu/armv7/mx6/hab.c new file mode 100644 index 000000000..518777536 --- /dev/null +++ b/arch/arm/cpu/armv7/mx6/hab.c @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hab.h> + +/* -------- start of HAB API updates ------------*/ +#define hab_rvt_report_event ((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT) +#define hab_rvt_report_status ((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS) +#define hab_rvt_authenticate_image \ + ((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE) +#define hab_rvt_entry ((hab_rvt_entry_t *)HAB_RVT_ENTRY) +#define hab_rvt_exit ((hab_rvt_exit_t *)HAB_RVT_EXIT) +#define hab_rvt_clock_init HAB_RVT_CLOCK_INIT + +bool is_hab_enabled(void) +{ + struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; + struct fuse_bank *bank = &ocotp->bank[0]; + struct fuse_bank0_regs *fuse = + (struct fuse_bank0_regs *)bank->fuse_regs; + uint32_t reg = readl(&fuse->cfg5); + + return (reg & 0x2) == 0x2; +} + +void display_event(uint8_t *event_data, size_t bytes) +{ + uint32_t i; + + if (!(event_data && bytes > 0)) + return; + + for (i = 0; i < bytes; i++) { + if (i == 0) + printf("\t0x%02x", event_data[i]); + else if ((i % 8) == 0) + printf("\n\t0x%02x", event_data[i]); + else + printf(" 0x%02x", event_data[i]); + } +} + +int get_hab_status(void) +{ + uint32_t index = 0; /* Loop index */ + uint8_t event_data[128]; /* Event data buffer */ + size_t bytes = sizeof(event_data); /* Event size in bytes */ + enum hab_config config = 0; + enum hab_state state = 0; + + if (is_hab_enabled()) + puts("\nSecure boot enabled\n"); + else + puts("\nSecure boot disabled\n"); + + /* Check HAB status */ + if (hab_rvt_report_status(&config, &state) != HAB_SUCCESS) { + printf("\nHAB Configuration: 0x%02x, HAB State: 0x%02x\n", + config, state); + + /* Display HAB Error events */ + while (hab_rvt_report_event(HAB_FAILURE, index, event_data, + &bytes) == HAB_SUCCESS) { + puts("\n"); + printf("--------- HAB Event %d -----------------\n", + index + 1); + puts("event data:\n"); + display_event(event_data, bytes); + puts("\n"); + bytes = sizeof(event_data); + index++; + } + } + /* Display message if no HAB events are found */ + else { + printf("\nHAB Configuration: 0x%02x, HAB State: 0x%02x\n", + config, state); + puts("No HAB Events Found!\n\n"); + } + return 0; +} + +int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + if ((argc != 1)) { + cmd_usage(cmdtp); + return 1; + } + + get_hab_status(); + + return 0; +} + +U_BOOT_CMD( + hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status, + "display HAB status", + "" + ); diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 8150bffb8..a3902962b 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -213,6 +213,34 @@ const struct boot_mode soc_boot_modes[] = { void s_init(void) { + struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; + int is_6q = is_cpu_type(MXC_CPU_MX6Q); + u32 mask480; + u32 mask528; + + /* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs + * to make sure PFD is working right, otherwise, PFDs may + * not output clock after reset, MX6DL and MX6SL have added 396M pfd + * workaround in ROM code, as bus clock need it + */ + + mask480 = ANATOP_PFD_CLKGATE_MASK(0) | + ANATOP_PFD_CLKGATE_MASK(1) | + ANATOP_PFD_CLKGATE_MASK(2) | + ANATOP_PFD_CLKGATE_MASK(3); + mask528 = ANATOP_PFD_CLKGATE_MASK(0) | + ANATOP_PFD_CLKGATE_MASK(1) | + ANATOP_PFD_CLKGATE_MASK(3); + + /* + * Don't reset PFD2 on DL/S + */ + if (is_6q) + mask528 |= ANATOP_PFD_CLKGATE_MASK(2); + writel(mask480, &anatop->pfd_480_set); + writel(mask528, &anatop->pfd_528_set); + writel(mask480, &anatop->pfd_480_clr); + writel(mask528, &anatop->pfd_528_clr); } #ifdef CONFIG_IMX_HDMI diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c index e903ed9ac..9f989ff86 100644 --- a/arch/arm/cpu/armv7/omap3/clock.c +++ b/arch/arm/cpu/armv7/omap3/clock.c @@ -183,8 +183,7 @@ static void dpll3_init_34xx(u32 sil_index, u32 clk_index) * if running from flash, jump to small relocated code * area in SRAM. */ - f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start + - SRAM_VECT_CODE); + f_lock_pll = (void *) (SRAM_CLK_CODE); p0 = readl(&prcm_base->clken_pll); sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS); @@ -401,8 +400,7 @@ static void dpll3_init_36xx(u32 sil_index, u32 clk_index) * if running from flash, jump to small relocated code * area in SRAM. */ - f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start + - SRAM_VECT_CODE); + f_lock_pll = (void *) (SRAM_CLK_CODE); p0 = readl(&prcm_base->clken_pll); sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS); diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index 98c3c03a0..6f7261b7b 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -69,15 +69,13 @@ ENDPROC(do_omap3_emu_romcode_call) *************************************************************************/ ENTRY(cpy_clk_code) /* Copy DPLL code into SRAM */ - adr r0, go_to_speed /* get addr of clock setting code */ - mov r2, #384 /* r2 size to copy (div by 32 bytes) */ - mov r1, r1 /* r1 <- dest address (passed in) */ - add r2, r2, r0 /* r2 <- source end address */ + adr r0, go_to_speed /* copy from start of go_to_speed... */ + adr r2, lowlevel_init /* ... up to start of low_level_init */ next2: ldmia r0!, {r3 - r10} /* copy from source address [r0] */ stmia r1!, {r3 - r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ - bne next2 + blo next2 mov pc, lr /* back to caller */ ENDPROC(cpy_clk_code) diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c index 310df5a6e..6a225c8cb 100644 --- a/arch/arm/cpu/armv7/omap4/hw_data.c +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -50,6 +50,7 @@ static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = { /* * dpll locked at 1600 MHz - MPU clk at 800 MHz(OPP Turbo 4430) * OMAP4430 OPP_TURBO frequency + * OMAP4470 OPP_NOM frequency */ static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ @@ -76,6 +77,7 @@ static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = { }; /* OMAP4460 OPP_NOM frequency */ +/* OMAP4470 OPP_NOM (Low Power) frequency */ static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = { {200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ {800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ @@ -198,6 +200,20 @@ struct dplls omap4460_dplls = { .ddr = NULL }; +struct dplls omap4470_dplls = { + .mpu = mpu_dpll_params_1600mhz, + .core = core_dpll_params_1600mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + struct pmic_data twl6030_4430es1 = { .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV, .step = 12660, /* 12.66 mV represented in uV */ @@ -208,6 +224,7 @@ struct pmic_data twl6030_4430es1 = { .pmic_write = omap_vc_bypass_send_value, }; +/* twl6030 struct is used for TWL6030 and TWL6032 PMIC */ struct pmic_data twl6030 = { .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV, .step = 12660, /* 12.66 mV represented in uV */ @@ -271,6 +288,20 @@ struct vcores_data omap4460_volts = { .mm.pmic = &twl6030, }; +struct vcores_data omap4470_volts = { + .mpu.value = 1200, + .mpu.addr = SMPS_REG_ADDR_SMPS1, + .mpu.pmic = &twl6030, + + .core.value = 1126, + .core.addr = SMPS_REG_ADDR_SMPS1, + .core.pmic = &twl6030, + + .mm.value = 1137, + .mm.addr = SMPS_REG_ADDR_SMPS1, + .mm.pmic = &twl6030, +}; + /* * Enable essential clock domains, modules and * do some additional special settings needed @@ -476,6 +507,11 @@ void hw_data_init(void) *omap_vcores = &omap4460_volts; break; + case OMAP4470_ES1_0: + *dplls_data = &omap4470_dplls; + *omap_vcores = &omap4470_volts; + break; + default: printf("\n INVALID OMAP REVISION "); } diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c index 4da0fc0ad..b0598a077 100644 --- a/arch/arm/cpu/armv7/omap4/hwinit.c +++ b/arch/arm/cpu/armv7/omap4/hwinit.c @@ -138,6 +138,9 @@ void init_omap_revision(void) break; case MIDR_CORTEX_A9_R2P10: switch (readl(CONTROL_ID_CODE)) { + case OMAP4470_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = OMAP4470_ES1_0; + break; case OMAP4460_CONTROL_ID_CODE_ES1_1: *omap_si_rev = OMAP4460_ES1_1; break; diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c index d76dde719..67a79261f 100644 --- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c +++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c @@ -60,6 +60,20 @@ static const struct emif_regs emif_regs_elpida_380_mhz_1cs = { .emif_ddr_phy_ctlr_1 = 0x049ff418 }; +const struct emif_regs emif_regs_elpida_400_mhz_1cs = { + .sdram_config_init = 0x80800eb2, + .sdram_config = 0x80801ab2, + .ref_ctrl = 0x00000618, + .sdram_tim1 = 0x10eb0662, + .sdram_tim2 = 0x20370dd2, + .sdram_tim3 = 0x00b1c33f, + .read_idle_ctrl = 0x000501ff, + .zq_config = 0x500b3215, + .temp_alert_config = 0x58016893, + .emif_ddr_phy_ctlr_1_init = 0x049ffff5, + .emif_ddr_phy_ctlr_1 = 0x049ff418 +}; + const struct emif_regs emif_regs_elpida_400_mhz_2cs = { .sdram_config_init = 0x80000eb9, .sdram_config = 0x80001ab9, @@ -107,8 +121,10 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) *regs = &emif_regs_elpida_380_mhz_1cs; else if (omap4_rev == OMAP4430_ES2_0) *regs = &emif_regs_elpida_200_mhz_2cs; - else + else if (omap4_rev < OMAP4470_ES1_0) *regs = &emif_regs_elpida_400_mhz_2cs; + else + *regs = &emif_regs_elpida_400_mhz_1cs; } void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) __attribute__((weak, alias("emif_get_reg_dump_sdp"))); @@ -138,20 +154,31 @@ static const struct lpddr2_device_details elpida_2G_S4_details = { .manufacturer = LPDDR2_MANUFACTURER_ELPIDA }; +static const struct lpddr2_device_details elpida_4G_S4_details = { + .type = LPDDR2_TYPE_S4, + .density = LPDDR2_DENSITY_4Gb, + .io_width = LPDDR2_IO_WIDTH_32, + .manufacturer = LPDDR2_MANUFACTURER_ELPIDA +}; + struct lpddr2_device_details *emif_get_device_details_sdp(u32 emif_nr, u8 cs, struct lpddr2_device_details *lpddr2_dev_details) { u32 omap_rev = omap_revision(); /* EMIF1 & EMIF2 have identical configuration */ - if ((omap_rev == OMAP4430_ES1_0) && (cs == CS1)) { - /* Nothing connected on CS1 for ES1.0 */ + if (((omap_rev == OMAP4430_ES1_0) || (omap_rev == OMAP4470_ES1_0)) + && (cs == CS1)) { + /* Nothing connected on CS1 for 4430/4470 ES1.0 */ return NULL; - } else { - /* In all other cases Elpida 2G device */ + } else if (omap_rev < OMAP4470_ES1_0) { + /* In all other 4430/4460 cases Elpida 2G device */ *lpddr2_dev_details = elpida_2G_S4_details; - return lpddr2_dev_details; + } else { + /* 4470: 4G device */ + *lpddr2_dev_details = elpida_4G_S4_details; } + return lpddr2_dev_details; } struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs, @@ -265,7 +292,7 @@ void emif_get_device_timings_sdp(u32 emif_nr, /* Identical devices on EMIF1 & EMIF2 */ *cs0_device_timings = &elpida_2G_S4_timings; - if (omap_rev == OMAP4430_ES1_0) + if ((omap_rev == OMAP4430_ES1_0) || (omap_rev == OMAP4470_ES1_0)) *cs1_device_timings = NULL; else *cs1_device_timings = &elpida_2G_S4_timings; diff --git a/arch/arm/cpu/armv7/socfpga/Makefile b/arch/arm/cpu/armv7/socfpga/Makefile index 3b48ac9b2..5024fc55e 100644 --- a/arch/arm/cpu/armv7/socfpga/Makefile +++ b/arch/arm/cpu/armv7/socfpga/Makefile @@ -13,7 +13,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o SOBJS := lowlevel_init.o -COBJS-y := misc.o timer.o +COBJS-y := misc.o timer.o reset_manager.o COBJS-$(CONFIG_SPL_BUILD) += spl.o COBJS := $(COBJS-y) diff --git a/arch/arm/cpu/armv7/socfpga/misc.c b/arch/arm/cpu/armv7/socfpga/misc.c index 66edb3c20..2f1c7160f 100644 --- a/arch/arm/cpu/armv7/socfpga/misc.c +++ b/arch/arm/cpu/armv7/socfpga/misc.c @@ -6,36 +6,9 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/reset_manager.h> DECLARE_GLOBAL_DATA_PTR; -static const struct socfpga_reset_manager *reset_manager_base = - (void *)SOCFPGA_RSTMGR_ADDRESS; - -/* - * Write the reset manager register to cause reset - */ -void reset_cpu(ulong addr) -{ - /* request a warm reset */ - writel(RSTMGR_CTRL_SWWARMRSTREQ_LSB, &reset_manager_base->ctrl); - /* - * infinite loop here as watchdog will trigger and reset - * the processor - */ - while (1) - ; -} - -/* - * Release peripherals from reset based on handoff - */ -void reset_deassert_peripherals_handoff(void) -{ - writel(0, &reset_manager_base->per_mod_reset); -} - int dram_init(void) { gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); diff --git a/arch/arm/cpu/armv7/socfpga/reset_manager.c b/arch/arm/cpu/armv7/socfpga/reset_manager.c new file mode 100644 index 000000000..e320c011a --- /dev/null +++ b/arch/arm/cpu/armv7/socfpga/reset_manager.c @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2013 Altera Corporation <www.altera.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/reset_manager.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const struct socfpga_reset_manager *reset_manager_base = + (void *)SOCFPGA_RSTMGR_ADDRESS; + +/* + * Write the reset manager register to cause reset + */ +void reset_cpu(ulong addr) +{ + /* request a warm reset */ + writel((1 << RSTMGR_CTRL_SWWARMRSTREQ_LSB), + &reset_manager_base->ctrl); + /* + * infinite loop here as watchdog will trigger and reset + * the processor + */ + while (1) + ; +} + +/* + * Release peripherals from reset based on handoff + */ +void reset_deassert_peripherals_handoff(void) +{ + writel(0, &reset_manager_base->per_mod_reset); +} diff --git a/arch/arm/cpu/armv7/tegra114/config.mk b/arch/arm/cpu/armv7/tegra114/config.mk deleted file mode 100644 index cb1a19da8..000000000 --- a/arch/arm/cpu/armv7/tegra114/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms and conditions of the GNU General Public License, -# version 2, as published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -# more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# -CONFIG_ARCH_DEVICE_TREE := tegra114 diff --git a/arch/arm/cpu/armv7/tegra20/config.mk b/arch/arm/cpu/armv7/tegra20/config.mk deleted file mode 100644 index 3cac79bc1..000000000 --- a/arch/arm/cpu/armv7/tegra20/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2010,2011 -# NVIDIA Corporation <www.nvidia.com> -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# -CONFIG_ARCH_DEVICE_TREE := tegra20 diff --git a/arch/arm/cpu/armv7/tegra30/config.mk b/arch/arm/cpu/armv7/tegra30/config.mk deleted file mode 100644 index 719ca8192..000000000 --- a/arch/arm/cpu/armv7/tegra30/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms and conditions of the GNU General Public License, -# version 2, as published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -# more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# -CONFIG_ARCH_DEVICE_TREE := tegra30 diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile index e5494f748..de6b08157 100644 --- a/arch/arm/cpu/armv7/zynq/Makefile +++ b/arch/arm/cpu/armv7/zynq/Makefile @@ -14,6 +14,7 @@ LIB = $(obj)lib$(SOC).o COBJS-y := timer.o COBJS-y += cpu.o +COBJS-y += ddrc.o COBJS-y += slcr.o COBJS := $(COBJS-y) diff --git a/arch/arm/cpu/armv7/zynq/ddrc.c b/arch/arm/cpu/armv7/zynq/ddrc.c new file mode 100644 index 000000000..ba6a6aee5 --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/ddrc.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2012 - 2013 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2012 - 2013 Xilinx, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Control regsiter bitfield definitions */ +#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK 0xC +#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT 2 +#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT 1 + +/* ECC scrub regsiter definitions */ +#define ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK 0x7 +#define ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED 0x4 + +void zynq_ddrc_init(void) +{ + u32 width, ecctype; + + width = readl(&ddrc_base->ddrc_ctrl); + width = (width & ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK) >> + ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT; + ecctype = (readl(&ddrc_base->ecc_scrub) & + ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK); + + /* ECC is enabled when memory is in 16bit mode and it is enabled */ + if ((ecctype == ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED) && + (width == ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT)) { + puts("Memory: ECC enabled\n"); + /* + * Clear the first 1MB because it is not initialized from + * first stage bootloader. To get ECC to work all memory has + * been initialized by writing any value. + */ + memset(0, 0, 1 * 1024 * 1024); + } else { + puts("Memory: ECC disabled\n"); + } + + if (width == ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT) + gd->ram_size /= 2; +} diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c index e5fe99298..717ec65ae 100644 --- a/arch/arm/cpu/armv7/zynq/slcr.c +++ b/arch/arm/cpu/armv7/zynq/slcr.c @@ -70,7 +70,7 @@ void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk) /* Configure GEM_RCLK_CTRL */ writel(rclk, &slcr_base->gem0_rclk_ctrl); } - + udelay(100000); out: zynq_slcr_lock(); } diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index 490aed2e0..23bf03065 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -97,4 +97,6 @@ SECTIONS /DISCARD/ : { *(.plt*) } /DISCARD/ : { *(.interp*) } /DISCARD/ : { *(.gnu*) } + /DISCARD/ : { *(.ARM.exidx*) } + /DISCARD/ : { *(.gnu.linkonce.armexidx.*) } } diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 10b56e0db..73e6db899 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -46,6 +46,26 @@ #define PRM_RSTCTRL_RESET 0x01 #define PRM_RSTST_WARM_RESET_MASK 0x232 +/* + * Watchdog: + * Using the prescaler, the OMAP watchdog could go for many + * months before firing. These limits work without scaling, + * with the 60 second default assumed by most tools and docs. + */ +#define TIMER_MARGIN_MAX (24 * 60 * 60) /* 1 day */ +#define TIMER_MARGIN_DEFAULT 60 /* 60 secs */ +#define TIMER_MARGIN_MIN 1 + +#define PTV 0 /* prescale */ +#define GET_WLDR_VAL(secs) (0xffffffff - ((secs) * (32768/(1<<PTV))) + 1) +#define WDT_WWPS_PEND_WCLR BIT(0) +#define WDT_WWPS_PEND_WLDR BIT(2) +#define WDT_WWPS_PEND_WTGR BIT(3) +#define WDT_WWPS_PEND_WSPR BIT(4) + +#define WDT_WCLR_PRE BIT(5) +#define WDT_WCLR_PTV_OFF 2 + #ifndef __KERNEL_STRICT_NAMES #ifndef __ASSEMBLY__ struct gpmc_cs { @@ -193,7 +213,8 @@ struct cm_perpll { unsigned int dcan1clkctrl; /* offset 0xC4 */ unsigned int resv6[2]; unsigned int emiffwclkctrl; /* offset 0xD0 */ - unsigned int resv7[2]; + unsigned int epwmss0clkctrl; /* offset 0xD4 */ + unsigned int epwmss2clkctrl; /* offset 0xD8 */ unsigned int l3instrclkctrl; /* offset 0xDC */ unsigned int l3clkctrl; /* Offset 0xE0 */ unsigned int resv8[4]; @@ -204,6 +225,7 @@ struct cm_perpll { unsigned int l4hsclkctrl; /* offset 0x120 */ unsigned int resv10[8]; unsigned int cpswclkstctrl; /* offset 0x144 */ + unsigned int lcdcclkstctrl; /* offset 0x148 */ }; #else /* Encapsulating core pll registers */ @@ -366,6 +388,8 @@ struct cm_perpll { struct cm_dpll { unsigned int resv1[2]; unsigned int clktimer2clk; /* offset 0x08 */ + unsigned int resv2[10]; + unsigned int clklcdcpixelclk; /* offset 0x34 */ }; /* Control Module RTC registers */ @@ -486,6 +510,54 @@ struct ctrl_dev { unsigned int resv4[4]; unsigned int miisel; /* offset 0x50 */ }; + +/* gmii_sel register defines */ +#define GMII1_SEL_MII 0x0 +#define GMII1_SEL_RMII 0x1 +#define GMII1_SEL_RGMII 0x2 +#define GMII2_SEL_MII 0x0 +#define GMII2_SEL_RMII 0x4 +#define GMII2_SEL_RGMII 0x8 +#define RGMII1_IDMODE BIT(4) +#define RGMII2_IDMODE BIT(5) +#define RMII1_IO_CLK_EN BIT(6) +#define RMII2_IO_CLK_EN BIT(7) + +#define MII_MODE_ENABLE (GMII1_SEL_MII | GMII2_SEL_MII) +#define RMII_MODE_ENABLE (GMII1_SEL_RMII | GMII2_SEL_RMII) +#define RGMII_MODE_ENABLE (GMII1_SEL_RGMII | GMII2_SEL_RGMII) +#define RGMII_INT_DELAY (RGMII1_IDMODE | RGMII2_IDMODE) +#define RMII_CHIPCKL_ENABLE (RMII1_IO_CLK_EN | RMII2_IO_CLK_EN) + +/* PWMSS */ +struct pwmss_regs { + unsigned int idver; + unsigned int sysconfig; + unsigned int clkconfig; + unsigned int clkstatus; +}; +#define ECAP_CLK_EN BIT(0) +#define ECAP_CLK_STOP_REQ BIT(1) + +struct pwmss_ecap_regs { + unsigned int tsctr; + unsigned int ctrphs; + unsigned int cap1; + unsigned int cap2; + unsigned int cap3; + unsigned int cap4; + unsigned int resv1[4]; + unsigned short ecctl1; + unsigned short ecctl2; +}; + +/* Capture Control register 2 */ +#define ECTRL2_SYNCOSEL_MASK (0x03 << 6) +#define ECTRL2_MDSL_ECAP BIT(9) +#define ECTRL2_CTRSTP_FREERUN BIT(4) +#define ECTRL2_PLSL_LOW BIT(10) +#define ECTRL2_SYNC_EN BIT(5) + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL_STRICT_NAMES */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 2055b2549..ee5fce0da 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -68,4 +68,5 @@ /* CPSW Config space */ #define CPSW_BASE 0x4A100000 +int clk_get(int clk); #endif /* __AM33XX_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h index 8973fd884..e4231c81a 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h +++ b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h @@ -58,4 +58,11 @@ #define USB0_OTG_BASE 0x47401000 #define USB1_OTG_BASE 0x47401800 +/* LCD Controller */ +#define LCD_CNTL_BASE 0x4830E000 + +/* PWMSS */ +#define PWMSS0_BASE 0x48300000 +#define AM33XX_ECAP0_BASE 0x48300100 + #endif /* __AM33XX_HARDWARE_AM33XX_H */ diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index 1f8431196..225072186 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -18,7 +18,7 @@ #ifdef CONFIG_AM33XX #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40310000 -#define SRAM_SCRATCH_SPACE_ADDR 0x4030C000 +#define SRAM_SCRATCH_SPACE_ADDR 0x4030B800 #elif defined(CONFIG_TI81XX) #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h index d6597023c..9f54fddce 100644 --- a/arch/arm/include/asm/arch-at91/at91_common.h +++ b/arch/arm/include/asm/arch-at91/at91_common.h @@ -10,6 +10,7 @@ #define AT91_COMMON_H void at91_can_hw_init(void); +void at91_gmac_hw_init(void); void at91_macb_hw_init(void); void at91_mci_hw_init(void); void at91_serial0_hw_init(void); diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h index fcc6fdc21..a47103851 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9x5.h +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h @@ -162,6 +162,12 @@ #define ATMEL_ID_UHP ATMEL_ID_UHPHS /* + * PMECC table in ROM + */ +#define ATMEL_PMECC_INDEX_OFFSET_512 0x8000 +#define ATMEL_PMECC_INDEX_OFFSET_1024 0x10000 + +/* * at91sam9x5 specific prototypes */ #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/arch-at91/sama5d3.h b/arch/arm/include/asm/arch-at91/sama5d3.h index 49bd33510..fefee5ed2 100644 --- a/arch/arm/include/asm/arch-at91/sama5d3.h +++ b/arch/arm/include/asm/arch-at91/sama5d3.h @@ -191,8 +191,6 @@ */ #define ATMEL_PMECC_INDEX_OFFSET_512 0x10000 #define ATMEL_PMECC_INDEX_OFFSET_1024 0x18000 -#define ATMEL_PMECC_ALPHA_OFFSET_512 0x10000 -#define ATMEL_PMECC_ALPHA_OFFSET_1024 0x18000 /* * SAMA5D3 specific prototypes diff --git a/arch/arm/include/asm/arch-at91/sama5d3_smc.h b/arch/arm/include/asm/arch-at91/sama5d3_smc.h index c060894f1..6caa9b6ed 100644 --- a/arch/arm/include/asm/arch-at91/sama5d3_smc.h +++ b/arch/arm/include/asm/arch-at91/sama5d3_smc.h @@ -17,7 +17,6 @@ #define AT91_ASM_SMC_MODE0 (ATMEL_BASE_SMC + 0x60C) #else struct at91_cs { - u32 reserved[96]; u32 setup; /* 0x600 SMC Setup Register */ u32 pulse; /* 0x604 SMC Pulse Register */ u32 cycle; /* 0x608 SMC Cycle Register */ @@ -26,6 +25,7 @@ struct at91_cs { }; struct at91_smc { + u32 reserved[384]; struct at91_cs cs[4]; }; #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/arch-davinci/da8xx-fb.h b/arch/arm/include/asm/arch-davinci/da8xx-fb.h deleted file mode 100644 index c115034f0..000000000 --- a/arch/arm/include/asm/arch-davinci/da8xx-fb.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Porting to u-boot: - * - * (C) Copyright 2011 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de. - * - * Copyright (C) 2008-2009 MontaVista Software Inc. - * Copyright (C) 2008-2009 Texas Instruments Inc - * - * Based on the LCD driver for TI Avalanche processors written by - * Ajay Singh and Shalom Hai. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef DA8XX_FB_H -#define DA8XX_FB_H - -enum panel_type { - QVGA = 0 -}; - -enum panel_shade { - MONOCHROME = 0, - COLOR_ACTIVE, - COLOR_PASSIVE, -}; - -enum raster_load_mode { - LOAD_DATA = 1, - LOAD_PALETTE, -}; - -struct display_panel { - enum panel_type panel_type; /* QVGA */ - int max_bpp; - int min_bpp; - enum panel_shade panel_shade; -}; - -struct da8xx_panel { - const char name[25]; /* Full name <vendor>_<model> */ - unsigned short width; - unsigned short height; - int hfp; /* Horizontal front porch */ - int hbp; /* Horizontal back porch */ - int hsw; /* Horizontal Sync Pulse Width */ - int vfp; /* Vertical front porch */ - int vbp; /* Vertical back porch */ - int vsw; /* Vertical Sync Pulse Width */ - unsigned int pxl_clk; /* Pixel clock */ - unsigned char invert_pxl_clk; /* Invert Pixel clock */ -}; - -struct da8xx_lcdc_platform_data { - const char manu_name[10]; - void *controller_data; - const char type[25]; - void (*panel_power_ctrl)(int); -}; - -struct lcd_ctrl_config { - const struct display_panel *p_disp_panel; - - /* AC Bias Pin Frequency */ - int ac_bias; - - /* AC Bias Pin Transitions per Interrupt */ - int ac_bias_intrpt; - - /* DMA burst size */ - int dma_burst_sz; - - /* Bits per pixel */ - int bpp; - - /* FIFO DMA Request Delay */ - int fdd; - - /* TFT Alternative Signal Mapping (Only for active) */ - unsigned char tft_alt_mode; - - /* 12 Bit Per Pixel (5-6-5) Mode (Only for passive) */ - unsigned char stn_565_mode; - - /* Mono 8-bit Mode: 1=D0-D7 or 0=D0-D3 */ - unsigned char mono_8bit_mode; - - /* Invert line clock */ - unsigned char invert_line_clock; - - /* Invert frame clock */ - unsigned char invert_frm_clock; - - /* Horizontal and Vertical Sync Edge: 0=rising 1=falling */ - unsigned char sync_edge; - - /* Horizontal and Vertical Sync: Control: 0=ignore */ - unsigned char sync_ctrl; - - /* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */ - unsigned char raster_order; -}; - -struct lcd_sync_arg { - int back_porch; - int front_porch; - int pulse_width; -}; - -void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel); - -#endif /* ifndef DA8XX_FB_H */ diff --git a/arch/arm/include/asm/arch-exynos/mipi_dsim.h b/arch/arm/include/asm/arch-exynos/mipi_dsim.h index 8916d9d16..498a9ffc0 100644 --- a/arch/arm/include/asm/arch-exynos/mipi_dsim.h +++ b/arch/arm/include/asm/arch-exynos/mipi_dsim.h @@ -291,7 +291,7 @@ struct exynos_platform_mipi_dsim { */ struct mipi_dsim_master_ops { int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id, - unsigned int data0, unsigned int data1); + const unsigned char *data0, unsigned int data1); int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id, unsigned int data0, unsigned int data1); int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim); diff --git a/arch/arm/include/asm/arch-mx5/clock.h b/arch/arm/include/asm/arch-mx5/clock.h index 406d150ae..9ee79aede 100644 --- a/arch/arm/include/asm/arch-mx5/clock.h +++ b/arch/arm/include/asm/arch-mx5/clock.h @@ -46,10 +46,10 @@ u32 imx_get_fecclk(void); unsigned int mxc_get_clock(enum mxc_clock clk); int mxc_set_clock(u32 ref, u32 freq, u32 clk_type); void set_usb_phy_clk(void); -void enable_usb_phy1_clk(unsigned char enable); -void enable_usb_phy2_clk(unsigned char enable); +void enable_usb_phy1_clk(bool enable); +void enable_usb_phy2_clk(bool enable); void set_usboh3_clk(void); -void enable_usboh3_clk(unsigned char enable); +void enable_usboh3_clk(bool enable); void mxc_set_sata_internal_clock(void); int enable_i2c_clk(unsigned char enable, unsigned i2c_num); void enable_nfc_clk(unsigned char enable); diff --git a/arch/arm/include/asm/arch-mx6/hab.h b/arch/arm/include/asm/arch-mx6/hab.h new file mode 100644 index 000000000..d724f206f --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/hab.h @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + * +*/ + +#ifndef __SECURE_MX6Q_H__ +#define __SECURE_MX6Q_H__ + +#include <linux/types.h> + +/* -------- start of HAB API updates ------------*/ +/* The following are taken from HAB4 SIS */ + +/* Status definitions */ +enum hab_status { + HAB_STS_ANY = 0x00, + HAB_FAILURE = 0x33, + HAB_WARNING = 0x69, + HAB_SUCCESS = 0xf0 +}; + +/* Security Configuration definitions */ +enum hab_config { + HAB_CFG_RETURN = 0x33, /**< Field Return IC */ + HAB_CFG_OPEN = 0xf0, /**< Non-secure IC */ + HAB_CFG_CLOSED = 0xcc /**< Secure IC */ +}; + +/* State definitions */ +enum hab_state { + HAB_STATE_INITIAL = 0x33, /**< Initialising state (transitory) */ + HAB_STATE_CHECK = 0x55, /**< Check state (non-secure) */ + HAB_STATE_NONSECURE = 0x66, /**< Non-secure state */ + HAB_STATE_TRUSTED = 0x99, /**< Trusted state */ + HAB_STATE_SECURE = 0xaa, /**< Secure state */ + HAB_STATE_FAIL_SOFT = 0xcc, /**< Soft fail state */ + HAB_STATE_FAIL_HARD = 0xff, /**< Hard fail state (terminal) */ + HAB_STATE_NONE = 0xf0, /**< No security state machine */ + HAB_STATE_MAX +}; + +/*Function prototype description*/ +typedef enum hab_status hab_rvt_report_event_t(enum hab_status, uint32_t, + uint8_t* , size_t*); +typedef enum hab_status hab_rvt_report_status_t(enum hab_config *, + enum hab_state *); +typedef enum hab_status hab_loader_callback_f_t(void**, size_t*, const void*); +typedef enum hab_status hab_rvt_entry_t(void); +typedef enum hab_status hab_rvt_exit_t(void); +typedef void *hab_rvt_authenticate_image_t(uint8_t, ptrdiff_t, + void **, size_t *, hab_loader_callback_f_t); +typedef void hapi_clock_init_t(void); + +#define HAB_RVT_REPORT_EVENT (*(uint32_t *)0x000000B4) +#define HAB_RVT_REPORT_STATUS (*(uint32_t *)0x000000B8) +#define HAB_RVT_AUTHENTICATE_IMAGE (*(uint32_t *)0x000000A4) +#define HAB_RVT_ENTRY (*(uint32_t *)0x00000098) +#define HAB_RVT_EXIT (*(uint32_t *)0x0000009C) +#define HAB_RVT_CLOCK_INIT ((hapi_clock_init_t *)0x0000024D) + +#define HAB_CID_ROM 0 /**< ROM Caller ID */ +#define HAB_CID_UBOOT 1 /**< UBOOT Caller ID*/ +/* ----------- end of HAB API updates ------------*/ + +#endif diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 5d6bccbc0..7ef715267 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -456,7 +456,13 @@ struct fuse_bank0_regs { u32 uid_low; u32 rsvd1[3]; u32 uid_high; - u32 rsvd2[0x17]; + u32 rsvd2[3]; + u32 rsvd3[4]; + u32 rsvd4[4]; + u32 rsvd5[4]; + u32 cfg5; + u32 rsvd6[3]; + u32 rsvd7[4]; }; struct fuse_bank4_regs { @@ -629,29 +635,12 @@ struct anatop_regs { u32 digprog_sololite; /* 0x280 */ }; -#define ANATOP_PFD_480_PFD0_FRAC_SHIFT 0 -#define ANATOP_PFD_480_PFD0_FRAC_MASK (0x3f<<ANATOP_PFD_480_PFD0_FRAC_SHIFT) -#define ANATOP_PFD_480_PFD0_STABLE_SHIFT 6 -#define ANATOP_PFD_480_PFD0_STABLE_MASK (1<<ANATOP_PFD_480_PFD0_STABLE_SHIFT) -#define ANATOP_PFD_480_PFD0_CLKGATE_SHIFT 7 -#define ANATOP_PFD_480_PFD0_CLKGATE_MASK (1<<ANATOP_PFD_480_PFD0_CLKGATE_SHIFT) -#define ANATOP_PFD_480_PFD1_FRAC_SHIFT 8 -#define ANATOP_PFD_480_PFD1_FRAC_MASK (0x3f<<ANATOP_PFD_480_PFD1_FRAC_SHIFT) -#define ANATOP_PFD_480_PFD1_STABLE_SHIFT 14 -#define ANATOP_PFD_480_PFD1_STABLE_MASK (1<<ANATOP_PFD_480_PFD1_STABLE_SHIFT) -#define ANATOP_PFD_480_PFD1_CLKGATE_SHIFT 15 -#define ANATOP_PFD_480_PFD1_CLKGATE_MASK (0x3f<<ANATOP_PFD_480_PFD1_CLKGATE_SHIFT) -#define ANATOP_PFD_480_PFD2_FRAC_SHIFT 16 -#define ANATOP_PFD_480_PFD2_FRAC_MASK (1<<ANATOP_PFD_480_PFD2_FRAC_SHIFT) -#define ANATOP_PFD_480_PFD2_STABLE_SHIFT 22 -#define ANATOP_PFD_480_PFD2_STABLE_MASK (1<<ANATOP_PFD_480_PFD2_STABLE_SHIFT) -#define ANATOP_PFD_480_PFD2_CLKGATE_SHIFT 23 -#define ANATOP_PFD_480_PFD2_CLKGATE_MASK (0x3f<<ANATOP_PFD_480_PFD2_CLKGATE_SHIFT) -#define ANATOP_PFD_480_PFD3_FRAC_SHIFT 24 -#define ANATOP_PFD_480_PFD3_FRAC_MASK (1<<ANATOP_PFD_480_PFD3_FRAC_SHIFT) -#define ANATOP_PFD_480_PFD3_STABLE_SHIFT 30 -#define ANATOP_PFD_480_PFD3_STABLE_MASK (1<<ANATOP_PFD_480_PFD3_STABLE_SHIFT) -#define ANATOP_PFD_480_PFD3_CLKGATE_SHIFT 31 +#define ANATOP_PFD_FRAC_SHIFT(n) ((n)*8) +#define ANATOP_PFD_FRAC_MASK(n) (0x3f<<ANATOP_PFD_FRAC_SHIFT(n)) +#define ANATOP_PFD_STABLE_SHIFT(n) (6+((n)*8)) +#define ANATOP_PFD_STABLE_MASK(n) (1<<ANATOP_PFD_STABLE_SHIFT(n)) +#define ANATOP_PFD_CLKGATE_SHIFT(n) (7+((n)*8)) +#define ANATOP_PFD_CLKGATE_MASK(n) (1<<ANATOP_PFD_CLKGATE_SHIFT(n)) struct iomuxc_base_regs { u32 gpr[14]; /* 0x000 */ diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h index bfdfd2911..8c21364e7 100644 --- a/arch/arm/include/asm/arch-mx6/sys_proto.h +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h @@ -19,6 +19,13 @@ #define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) u32 get_cpu_rev(void); + +/* returns MXC_CPU_ value */ +#define cpu_type(rev) (((rev) >> 12)&0xff) + +/* use with MXC_CPU_ constants */ +#define is_cpu_type(cpu) (cpu_type(get_cpu_rev()) == cpu) + const char *get_imx_type(u32 imxtype); unsigned imx_ddr_size(void); diff --git a/arch/arm/include/asm/arch-mxs/regs-uartapp.h b/arch/arm/include/asm/arch-mxs/regs-uartapp.h new file mode 100644 index 000000000..7ceb810dc --- /dev/null +++ b/arch/arm/include/asm/arch-mxs/regs-uartapp.h @@ -0,0 +1,220 @@ +/* + * Freescale MXS UARTAPP Register Definitions + * + * Copyright (C) 2013 Andreas Wass <andreas.wass@dalelven.com> + * + * Based on code from LTIB: + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ARCH_ARM___MXS_UARTAPP_H +#define __ARCH_ARM___MXS_UARTAPP_H + +#include <asm/imx-common/regs-common.h> + +#ifndef __ASSEMBLY__ +struct mxs_uartapp_regs { + mxs_reg_32(hw_uartapp_ctrl0) + mxs_reg_32(hw_uartapp_ctrl1) + mxs_reg_32(hw_uartapp_ctrl2) + mxs_reg_32(hw_uartapp_linectrl) + mxs_reg_32(hw_uartapp_linectrl2) + mxs_reg_32(hw_uartapp_intr) + mxs_reg_32(hw_uartapp_data) + mxs_reg_32(hw_uartapp_stat) + mxs_reg_32(hw_uartapp_debug) + mxs_reg_32(hw_uartapp_version) + mxs_reg_32(hw_uartapp_autobaud) +}; +#endif + +#define UARTAPP_CTRL0_SFTRST_MASK (1 << 31) +#define UARTAPP_CTRL0_CLKGATE_MASK (1 << 30) +#define UARTAPP_CTRL0_RUN_MASK (1 << 29) +#define UARTAPP_CTRL0_RX_SOURCE_MASK (1 << 28) +#define UARTAPP_CTRL0_RXTO_ENABLE_MASK (1 << 27) +#define UARTAPP_CTRL0_RXTIMEOUT_OFFSET 16 +#define UARTAPP_CTRL0_RXTIMEOUT_MASK (0x7FF << 16) +#define UARTAPP_CTRL0_XFER_COUNT_OFFSET 0 +#define UARTAPP_CTRL0_XFER_COUNT_MASK 0xFFFF + +#define UARTAPP_CTRL1_RUN_MASK (1 << 28) + +#define UARTAPP_CTRL1_XFER_COUNT_OFFSET 0 +#define UARTAPP_CTRL1_XFER_COUNT_MASK 0xFFFF + +#define UARTAPP_CTRL2_INVERT_RTS_MASK (1 << 31) +#define UARTAPP_CTRL2_INVERT_CTS_MASK (1 << 30) +#define UARTAPP_CTRL2_INVERT_TX_MASK (1 << 29) +#define UARTAPP_CTRL2_INVERT_RX_MASK (1 << 28) +#define UARTAPP_CTRL2_RTS_SEMAPHORE_MASK (1 << 27) +#define UARTAPP_CTRL2_DMAONERR_MASK (1 << 26) +#define UARTAPP_CTRL2_TXDMAE_MASK (1 << 25) +#define UARTAPP_CTRL2_RXDMAE_MASK (1 << 24) +#define UARTAPP_CTRL2_RXIFLSEL_OFFSET 20 +#define UARTAPP_CTRL2_RXIFLSEL_MASK (0x7 << 20) + +#define UARTAPP_CTRL2_RXIFLSEL_NOT_EMPTY (0x0 << 20) +#define UARTAPP_CTRL2_RXIFLSEL_ONE_QUARTER (0x1 << 20) +#define UARTAPP_CTRL2_RXIFLSEL_ONE_HALF (0x2 << 20) +#define UARTAPP_CTRL2_RXIFLSEL_THREE_QUARTERS (0x3 << 20) +#define UARTAPP_CTRL2_RXIFLSEL_SEVEN_EIGHTHS (0x4 << 20) +#define UARTAPP_CTRL2_RXIFLSEL_INVALID5 (0x5 << 20) +#define UARTAPP_CTRL2_RXIFLSEL_INVALID6 (0x6 << 20) +#define UARTAPP_CTRL2_RXIFLSEL_INVALID7 (0x7 << 20) +#define UARTAPP_CTRL2_TXIFLSEL_OFFSET 16 +#define UARTAPP_CTRL2_TXIFLSEL_MASK (0x7 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_EMPTY (0x0 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_ONE_QUARTER (0x1 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_ONE_HALF (0x2 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_THREE_QUARTERS (0x3 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_SEVEN_EIGHTHS (0x4 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_INVALID5 (0x5 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_INVALID6 (0x6 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_INVALID7 (0x7 << 16) +#define UARTAPP_CTRL2_CTSEN_MASK (1 << 15) +#define UARTAPP_CTRL2_RTSEN_MASK (1 << 14) +#define UARTAPP_CTRL2_OUT2_MASK (1 << 13) +#define UARTAPP_CTRL2_OUT1_MASK (1 << 12) +#define UARTAPP_CTRL2_RTS_MASK (1 << 11) +#define UARTAPP_CTRL2_DTR_MASK (1 << 10) +#define UARTAPP_CTRL2_RXE_MASK (1 << 9) +#define UARTAPP_CTRL2_TXE_MASK (1 << 8) +#define UARTAPP_CTRL2_LBE_MASK (1 << 7) +#define UARTAPP_CTRL2_USE_LCR2_MASK (1 << 6) + +#define UARTAPP_CTRL2_SIRLP_MASK (1 << 2) +#define UARTAPP_CTRL2_SIREN_MASK (1 << 1) +#define UARTAPP_CTRL2_UARTEN_MASK 0x01 + +#define UARTAPP_LINECTRL_BAUD_DIVINT_OFFSET 16 +#define UARTAPP_LINECTRL_BAUD_DIVINT_MASK (0xFFFF << 16) +#define UARTAPP_LINECTRL_EXTRACT_BAUD_DIVINT_OFFSET 6 + +#define UARTAPP_LINECTRL_BAUD_DIVFRAC_OFFSET 8 +#define UARTAPP_LINECTRL_BAUD_DIVFRAC_MASK (0x3F << 8) +#define UARTAPP_LINECTRL_EXTRACT_BAUD_DIVFRAC_MASK 0x3F + +#define UARTAPP_LINECTRL_SPS_MASK (1 << 7) +#define UARTAPP_LINECTRL_WLEN_OFFSET 5 +#define UARTAPP_LINECTRL_WLEN_MASK (0x03 << 5) +#define UARTAPP_LINECTRL_WLEN_5BITS (0x00 << 5) +#define UARTAPP_LINECTRL_WLEN_6BITS (0x01 << 5) +#define UARTAPP_LINECTRL_WLEN_7BITS (0x02 << 5) +#define UARTAPP_LINECTRL_WLEN_8BITS (0x03 << 5) + +#define UARTAPP_LINECTRL_FEN_MASK (1 << 4) +#define UARTAPP_LINECTRL_STP2_MASK (1 << 3) +#define UARTAPP_LINECTRL_EPS_MASK (1 << 2) +#define UARTAPP_LINECTRL_PEN_MASK (1 << 1) +#define UARTAPP_LINECTRL_BRK_MASK 1 + +#define UARTAPP_LINECTRL2_BAUD_DIVINT_OFFSET 16 +#define UARTAPP_LINECTRL2_BAUD_DIVINT_MASK (0xFFFF << 16) +#define UARTAPP_LINECTRL2_EXTRACT_BAUD_DIVINT_OFFSET 6 + +#define UARTAPP_LINECTRL2_BAUD_DIVFRAC_OFFSET 8 +#define UARTAPP_LINECTRL2_BAUD_DIVFRAC_MASK (0x3F << 8) +#define UARTAPP_LINECTRL2_EXTRACT_BAUD_DIVFRAC_MASK 0x3F + +#define UARTAPP_LINECTRL2_SPS_MASK (1 << 7) +#define UARTAPP_LINECTRL2_WLEN_OFFSET 5 +#define UARTAPP_LINECTRL2_WLEN_MASK (0x03 << 5) +#define UARTAPP_LINECTRL2_WLEN_5BITS (0x00 << 5) +#define UARTAPP_LINECTRL2_WLEN_6BITS (0x01 << 5) +#define UARTAPP_LINECTRL2_WLEN_7BITS (0x02 << 5) +#define UARTAPP_LINECTRL2_WLEN_8BITS (0x03 << 5) + +#define UARTAPP_LINECTRL2_FEN_MASK (1 << 4) +#define UARTAPP_LINECTRL2_STP2_MASK (1 << 3) +#define UARTAPP_LINECTRL2_EPS_MASK (1 << 2) +#define UARTAPP_LINECTRL2_PEN_MASK (1 << 1) + +#define UARTAPP_INTR_ABDIEN_MASK (1 << 27) +#define UARTAPP_INTR_OEIEN_MASK (1 << 26) +#define UARTAPP_INTR_BEIEN_MASK (1 << 25) +#define UARTAPP_INTR_PEIEN_MASK (1 << 24) +#define UARTAPP_INTR_FEIEN_MASK (1 << 23) +#define UARTAPP_INTR_RTIEN_MASK (1 << 22) +#define UARTAPP_INTR_TXIEN_MASK (1 << 21) +#define UARTAPP_INTR_RXIEN_MASK (1 << 20) +#define UARTAPP_INTR_DSRMIEN_MASK (1 << 19) +#define UARTAPP_INTR_DCDMIEN_MASK (1 << 18) +#define UARTAPP_INTR_CTSMIEN_MASK (1 << 17) +#define UARTAPP_INTR_RIMIEN_MASK (1 << 16) + +#define UARTAPP_INTR_ABDIS_MASK (1 << 11) +#define UARTAPP_INTR_OEIS_MASK (1 << 10) +#define UARTAPP_INTR_BEIS_MASK (1 << 9) +#define UARTAPP_INTR_PEIS_MASK (1 << 8) +#define UARTAPP_INTR_FEIS_MASK (1 << 7) +#define UARTAPP_INTR_RTIS_MASK (1 << 6) +#define UARTAPP_INTR_TXIS_MASK (1 << 5) +#define UARTAPP_INTR_RXIS_MASK (1 << 4) +#define UARTAPP_INTR_DSRMIS_MASK (1 << 3) +#define UARTAPP_INTR_DCDMIS_MASK (1 << 2) +#define UARTAPP_INTR_CTSMIS_MASK (1 << 1) +#define UARTAPP_INTR_RIMIS_MASK 0x1 + +#define UARTAPP_DATA_DATA_OFFSET 0 +#define UARTAPP_DATA_DATA_MASK 0xFFFFFFFF +#define UARTAPP_STAT_PRESENT_MASK (1 << 31) +#define UARTAPP_STAT_PRESENT_UNAVAILABLE (0x0 << 31) +#define UARTAPP_STAT_PRESENT_AVAILABLE (0x1 << 31) + +#define UARTAPP_STAT_HISPEED_MASK (1 << 30) +#define UARTAPP_STAT_HISPEED_UNAVAILABLE (0x0 << 30) +#define UARTAPP_STAT_HISPEED_AVAILABLE (0x1 << 30) + +#define UARTAPP_STAT_BUSY_MASK (1 << 29) +#define UARTAPP_STAT_CTS_MASK (1 << 28) +#define UARTAPP_STAT_TXFE_MASK (1 << 27) +#define UARTAPP_STAT_RXFF_MASK (1 << 26) +#define UARTAPP_STAT_TXFF_MASK (1 << 25) +#define UARTAPP_STAT_RXFE_MASK (1 << 24) +#define UARTAPP_STAT_RXBYTE_INVALID_OFFSET 20 +#define UARTAPP_STAT_RXBYTE_INVALID_MASK (0xF << 20) + +#define UARTAPP_STAT_OERR_MASK (1 << 19) +#define UARTAPP_STAT_BERR_MASK (1 << 18) +#define UARTAPP_STAT_PERR_MASK (1 << 17) +#define UARTAPP_STAT_FERR_MASK (1 << 16) +#define UARTAPP_STAT_RXCOUNT_OFFSET 0 +#define UARTAPP_STAT_RXCOUNT_MASK 0xFFFF + +#define UARTAPP_DEBUG_RXIBAUD_DIV_OFFSET 16 +#define UARTAPP_DEBUG_RXIBAUD_DIV_MASK (0xFFFF << 16) + +#define UARTAPP_DEBUG_RXFBAUD_DIV_OFFSET 10 +#define UARTAPP_DEBUG_RXFBAUD_DIV_MASK (0x3F << 10) + +#define UARTAPP_DEBUG_TXDMARUN_MASK (1 << 5) +#define UARTAPP_DEBUG_RXDMARUN_MASK (1 << 4) +#define UARTAPP_DEBUG_TXCMDEND_MASK (1 << 3) +#define UARTAPP_DEBUG_RXCMDEND_MASK (1 << 2) +#define UARTAPP_DEBUG_TXDMARQ_MASK (1 << 1) +#define UARTAPP_DEBUG_RXDMARQ_MASK 0x01 + +#define UARTAPP_VERSION_MAJOR_OFFSET 24 +#define UARTAPP_VERSION_MAJOR_MASK (0xFF << 24) + +#define UARTAPP_VERSION_MINOR_OFFSET 16 +#define UARTAPP_VERSION_MINOR_MASK (0xFF << 16) + +#define UARTAPP_VERSION_STEP_OFFSET 0 +#define UARTAPP_VERSION_STEP_MASK 0xFFFF + +#define UARTAPP_AUTOBAUD_REFCHAR1_OFFSET 24 +#define UARTAPP_AUTOBAUD_REFCHAR1_MASK (0xFF << 24) + +#define UARTAPP_AUTOBAUD_REFCHAR0_OFFSET 16 +#define UARTAPP_AUTOBAUD_REFCHAR0_MASK (0xFF << 16) + +#define UARTAPP_AUTOBAUD_UPDATE_TX_MASK (1 << 4) +#define UARTAPP_AUTOBAUD_TWO_REF_CHARS_MASK (1 << 3) +#define UARTAPP_AUTOBAUD_START_WITH_RUNBIT_MASK (1 << 2) +#define UARTAPP_AUTOBAUD_START_BAUD_DETECT_MASK (1 << 1) +#define UARTAPP_AUTOBAUD_BAUD_DETECT_ENABLE_MASK 0x01 +#endif /* __ARCH_ARM___UARTAPP_H */ diff --git a/arch/arm/include/asm/arch-omap3/clock.h b/arch/arm/include/asm/arch-omap3/clock.h index 514839c77..be669c156 100644 --- a/arch/arm/include/asm/arch-omap3/clock.h +++ b/arch/arm/include/asm/arch-omap3/clock.h @@ -63,6 +63,4 @@ extern dpll_param *get_36x_core_dpll_param(void); extern dpll_param *get_36x_per_dpll_param(void); extern dpll_param *get_36x_per2_dpll_param(void); -extern void *_end_vect, *_start; - #endif diff --git a/arch/arm/include/asm/arch-omap3/gpio.h b/arch/arm/include/asm/arch-omap3/gpio.h index d72f5e50a..f664c1199 100644 --- a/arch/arm/include/asm/arch-omap3/gpio.h +++ b/arch/arm/include/asm/arch-omap3/gpio.h @@ -2,20 +2,7 @@ * Copyright (c) 2009 Wind River Systems, Inc. * Tom Rix <Tom.Rix@windriver.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 * * This work is derived from the linux 2.6.27 kernel source * To fetch, use the kernel repository @@ -30,10 +17,6 @@ * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _GPIO_OMAP3_H #define _GPIO_OMAP3_H diff --git a/arch/arm/include/asm/arch-omap4/clock.h b/arch/arm/include/asm/arch-omap4/clock.h index b2e03d6e1..f3a682a19 100644 --- a/arch/arm/include/asm/arch-omap4/clock.h +++ b/arch/arm/include/asm/arch-omap4/clock.h @@ -149,11 +149,16 @@ /* PRM_VC_VAL_BYPASS */ #define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 -/* SMPS */ +/* PMIC */ #define SMPS_I2C_SLAVE_ADDR 0x12 +/* TWL6030 SMPS */ #define SMPS_REG_ADDR_VCORE1 0x55 #define SMPS_REG_ADDR_VCORE2 0x5B #define SMPS_REG_ADDR_VCORE3 0x61 +/* TWL6032 SMPS */ +#define SMPS_REG_ADDR_SMPS1 0x55 +#define SMPS_REG_ADDR_SMPS2 0x5B +#define SMPS_REG_ADDR_SMPS5 0x49 #define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV 607700 #define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV 709000 diff --git a/arch/arm/include/asm/arch-omap4/gpio.h b/arch/arm/include/asm/arch-omap4/gpio.h index fdf65edab..72ba1d71a 100644 --- a/arch/arm/include/asm/arch-omap4/gpio.h +++ b/arch/arm/include/asm/arch-omap4/gpio.h @@ -2,20 +2,7 @@ * Copyright (c) 2009 Wind River Systems, Inc. * Tom Rix <Tom.Rix@windriver.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 * * This work is derived from the linux 2.6.27 kernel source * To fetch, use the kernel repository @@ -30,10 +17,6 @@ * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _GPIO_OMAP4_H #define _GPIO_OMAP4_H diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index 3823a37f2..9129c0dd7 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -41,6 +41,7 @@ #define OMAP4_CONTROL_ID_CODE_ES2_3 0x6B95C02F #define OMAP4460_CONTROL_ID_CODE_ES1_0 0x0B94E02F #define OMAP4460_CONTROL_ID_CODE_ES1_1 0x2B94E02F +#define OMAP4470_CONTROL_ID_CODE_ES1_0 0x0B97502F /* UART */ #define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000) diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h index 3adfc090f..9a2166ce4 100644 --- a/arch/arm/include/asm/arch-omap5/clock.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -149,6 +149,23 @@ /* CM_L3INIT_USBPHY_CLKCTRL */ #define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK 8 +/* CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OPTFCLKEN_FUNC48M_CLK (1 << 15) +#define OPTFCLKEN_HSIC480M_P2_CLK (1 << 14) +#define OPTFCLKEN_HSIC480M_P1_CLK (1 << 13) +#define OPTFCLKEN_HSIC60M_P2_CLK (1 << 12) +#define OPTFCLKEN_HSIC60M_P1_CLK (1 << 11) +#define OPTFCLKEN_UTMI_P3_CLK (1 << 10) +#define OPTFCLKEN_UTMI_P2_CLK (1 << 9) +#define OPTFCLKEN_UTMI_P1_CLK (1 << 8) +#define OPTFCLKEN_HSIC480M_P3_CLK (1 << 7) +#define OPTFCLKEN_HSIC60M_P3_CLK (1 << 6) + +/* CM_L3INIT_USB_TLL_HS_CLKCTRL */ +#define OPTFCLKEN_USB_CH0_CLK_ENABLE (1 << 8) +#define OPTFCLKEN_USB_CH1_CLK_ENABLE (1 << 9) +#define OPTFCLKEN_USB_CH2_CLK_ENABLE (1 << 10) + /* CM_MPU_MPU_CLKCTRL */ #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24 #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (3 << 24) diff --git a/arch/arm/include/asm/arch-omap5/ehci.h b/arch/arm/include/asm/arch-omap5/ehci.h new file mode 100644 index 000000000..3921e4ab4 --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/ehci.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com* + * Author: Govindraj R <govindraj.raja@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _EHCI_H +#define _EHCI_H + +#define OMAP_EHCI_BASE (OMAP54XX_L4_CORE_BASE + 0x64C00) +#define OMAP_UHH_BASE (OMAP54XX_L4_CORE_BASE + 0x64000) +#define OMAP_USBTLL_BASE (OMAP54XX_L4_CORE_BASE + 0x62000) + +/* TLL Register Set */ +#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) +#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) +#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) +#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) +#define OMAP_USBTLL_SYSSTATUS_RESETDONE 1 + +#define OMAP_UHH_SYSCONFIG_SOFTRESET 1 +#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE (1 << 2) +#define OMAP_UHH_SYSCONFIG_NOIDLE (1 << 2) +#define OMAP_UHH_SYSCONFIG_NOSTDBY (1 << 4) + +#define OMAP_UHH_SYSCONFIG_VAL (OMAP_UHH_SYSCONFIG_NOIDLE | \ + OMAP_UHH_SYSCONFIG_NOSTDBY) + +#endif /* _EHCI_H */ diff --git a/arch/arm/include/asm/arch-omap5/gpio.h b/arch/arm/include/asm/arch-omap5/gpio.h index 7c82f9036..9dd03c9fa 100644 --- a/arch/arm/include/asm/arch-omap5/gpio.h +++ b/arch/arm/include/asm/arch-omap5/gpio.h @@ -2,20 +2,7 @@ * Copyright (c) 2009 Wind River Systems, Inc. * Tom Rix <Tom.Rix@windriver.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 * * This work is derived from the linux 2.6.27 kernel source * To fetch, use the kernel repository @@ -30,10 +17,6 @@ * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _GPIO_OMAP5_H #define _GPIO_OMAP5_H diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 597c692b9..e9a51d340 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -153,6 +153,15 @@ struct s32ktimer { #define EFUSE_4 0x45145100 #endif /* __ASSEMBLY__ */ +/* + * In all cases, the TRM defines the RAM Memory Map for the processor + * and indicates the area for the downloaded image. We use all of that + * space for download and once up and running may use other parts of the + * map for our needs. We set a scratch space that is at the end of the + * OMAP5 download area, but within the DRA7xx download area (as it is + * much larger) and do not, at this time, make use of the additional + * space. + */ #ifdef CONFIG_DRA7XX #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */ @@ -160,7 +169,7 @@ struct s32ktimer { #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */ #endif -#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START +#define SRAM_SCRATCH_SPACE_ADDR 0x4031E000 /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4031F000 diff --git a/arch/arm/include/asm/arch-socfpga/reset_manager.h b/arch/arm/include/asm/arch-socfpga/reset_manager.h index 13d735770..3e9547682 100644 --- a/arch/arm/include/asm/arch-socfpga/reset_manager.h +++ b/arch/arm/include/asm/arch-socfpga/reset_manager.h @@ -11,16 +11,20 @@ void reset_cpu(ulong addr); void reset_deassert_peripherals_handoff(void); struct socfpga_reset_manager { - u32 padding1; + u32 status; u32 ctrl; - u32 padding2; - u32 padding3; + u32 counts; + u32 padding1; u32 mpu_mod_reset; u32 per_mod_reset; u32 per2_mod_reset; u32 brg_mod_reset; }; +#if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET) +#define RSTMGR_CTRL_SWWARMRSTREQ_LSB 2 +#else #define RSTMGR_CTRL_SWWARMRSTREQ_LSB 1 +#endif #endif /* _RESET_MANAGER_H_ */ diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h index 25f0e3d9c..cd6967772 100644 --- a/arch/arm/include/asm/arch-zynq/hardware.h +++ b/arch/arm/include/asm/arch-zynq/hardware.h @@ -17,6 +17,9 @@ #define ZYNQ_SDHCI_BASEADDR1 0xE0101000 #define ZYNQ_I2C_BASEADDR0 0xE0004000 #define ZYNQ_I2C_BASEADDR1 0xE0005000 +#define ZYNQ_SPI_BASEADDR0 0xE0006000 +#define ZYNQ_SPI_BASEADDR1 0xE0007000 +#define ZYNQ_DDRC_BASEADDR 0xF8006000 /* Reflect slcr offsets */ struct slcr_regs { @@ -84,4 +87,11 @@ struct scu_regs { #define scu_base ((struct scu_regs *)ZYNQ_SCU_BASEADDR) +struct ddrc_regs { + u32 ddrc_ctrl; /* 0x0 */ + u32 reserved[60]; + u32 ecc_scrub; /* 0xF4 */ +}; +#define ddrc_base ((struct ddrc_regs *)ZYNQ_DDRC_BASEADDR) + #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h index 19a4eec6a..110de9092 100644 --- a/arch/arm/include/asm/arch-zynq/sys_proto.h +++ b/arch/arm/include/asm/arch-zynq/sys_proto.h @@ -14,6 +14,7 @@ extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk); extern void zynq_slcr_devcfg_disable(void); extern void zynq_slcr_devcfg_enable(void); extern u32 zynq_slcr_get_idcode(void); +extern void zynq_ddrc_init(void); /* Driver extern functions */ extern int zynq_sdhci_init(u32 regbase); diff --git a/arch/arm/include/asm/ehci-omap.h b/arch/arm/include/asm/ehci-omap.h index 77e81701b..ac83a539a 100644 --- a/arch/arm/include/asm/ehci-omap.h +++ b/arch/arm/include/asm/ehci-omap.h @@ -42,6 +42,7 @@ enum usbhs_omap_port_mode { /* Values of UHH_REVISION - Note: these are not given in the TRM */ #define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */ #define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */ +#define OMAP_USBHS_REV2_1 0x50700101 /* OMAP5 */ /* UHH Register Set */ #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) @@ -60,6 +61,7 @@ enum usbhs_omap_port_mode { #define OMAP_P2_MODE_CLEAR (3 << 18) #define OMAP_P2_MODE_TLL (1 << 18) #define OMAP_P2_MODE_HSIC (3 << 18) +#define OMAP_P3_MODE_CLEAR (3 << 20) #define OMAP_P3_MODE_HSIC (3 << 20) /* EHCI Register Set */ diff --git a/arch/arm/include/asm/imx-common/dma.h b/arch/arm/include/asm/imx-common/dma.h index 5f516ef6e..d5c1f7f25 100644 --- a/arch/arm/include/asm/imx-common/dma.h +++ b/arch/arm/include/asm/imx-common/dma.h @@ -161,4 +161,6 @@ void mxs_dma_init(void); int mxs_dma_init_channel(int chan); int mxs_dma_release(int chan); +void mxs_dma_circ_start(int chan, struct mxs_dma_desc *pdesc); + #endif /* __DMA_H__ */ diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 66f416f99..5e2f027ba 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -622,6 +622,7 @@ static inline u8 is_omap54xx(void) #define OMAP4430_ES2_3 0x44300230 #define OMAP4460_ES1_0 0x44600100 #define OMAP4460_ES1_1 0x44600110 +#define OMAP4470_ES1_0 0x44700100 /* omap5 */ #define OMAP5430_SILICON_ID_INVALID 0 diff --git a/arch/arm/include/asm/omap_gpio.h b/arch/arm/include/asm/omap_gpio.h index 1ebfa8694..5d25d04c3 100644 --- a/arch/arm/include/asm/omap_gpio.h +++ b/arch/arm/include/asm/omap_gpio.h @@ -2,20 +2,7 @@ * Copyright (c) 2009 Wind River Systems, Inc. * Tom Rix <Tom.Rix@windriver.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 * * This work is derived from the linux 2.6.27 kernel source * To fetch, use the kernel repository @@ -30,10 +17,6 @@ * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _GPIO_H #define _GPIO_H diff --git a/arch/blackfin/cpu/gpio.c b/arch/blackfin/cpu/gpio.c index f74a0b7c0..f9aff4d89 100644 --- a/arch/blackfin/cpu/gpio.c +++ b/arch/blackfin/cpu/gpio.c @@ -247,7 +247,7 @@ static struct { static void portmux_setup(unsigned short per) { - u16 y, offset, muxreg; + u16 y, offset, muxreg, mask; u16 function = P_FUNCT2MUX(per); for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) { @@ -258,12 +258,13 @@ static void portmux_setup(unsigned short per) offset = port_mux_lut[y].offset; muxreg = bfin_read_PORT_MUX(); - if (offset != 1) - muxreg &= ~(1 << offset); + if (offset == 1) + mask = 3; else - muxreg &= ~(3 << 1); + mask = 1; - muxreg |= (function << offset); + muxreg &= ~(mask << offset); + muxreg |= ((function & mask) << offset); bfin_write_PORT_MUX(muxreg); } } @@ -662,8 +663,8 @@ void special_gpio_free(unsigned gpio) return; } - reserve(special_gpio, gpio); - reserve(peri, gpio); + unreserve(special_gpio, gpio); + unreserve(peri, gpio); set_label(gpio, "free"); } #endif diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index 10223bdb7..17d1f468d 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -67,6 +67,7 @@ static int display_banner(void) static int init_baudrate(void) { gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); + gd->bd->bi_baudrate = gd->baudrate; return 0; } @@ -235,8 +236,6 @@ static int global_board_data_init(void) bd->bi_sclk = get_sclk(); bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; - bd->bi_baudrate = (gd->baudrate > 0) - ? simple_strtoul(gd->baudrate, NULL, 10) : CONFIG_BAUDRATE; return 0; } diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk index 6692f24a0..fc545a9ee 100644 --- a/arch/microblaze/config.mk +++ b/arch/microblaze/config.mk @@ -15,5 +15,3 @@ CONFIG_STANDALONE_LOAD_ADDR ?= 0x80F00000 PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__ LDSCRIPT ?= $(SRCTREE)/$(CPUDIR)/u-boot.lds - -CONFIG_ARCH_DEVICE_TREE := microblaze diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index 8267191fd..f7182f27e 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -16,6 +16,7 @@ #include <stdio_dev.h> #include <serial.h> #include <net.h> +#include <spi.h> #include <linux/compiler.h> #include <asm/processor.h> #include <asm/microblaze_intc.h> @@ -147,6 +148,10 @@ void board_init_f(ulong not_used) } #endif +#ifdef CONFIG_SPI + spi_init(); +#endif + /* relocate environment function pointers etc. */ env_relocate(); diff --git a/arch/mips/include/asm/config.h b/arch/mips/include/asm/config.h index cd2973478..3a891ba62 100644 --- a/arch/mips/include/asm/config.h +++ b/arch/mips/include/asm/config.h @@ -7,4 +7,7 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_LMB +#define CONFIG_SYS_BOOT_RAMDISK_HIGH + #endif diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index e9f82f711..f91406c06 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -19,11 +19,7 @@ LGOBJS := $(addprefix $(obj),$(GLSOBJS)) SOBJS-y += COBJS-y += board.o -ifeq ($(CONFIG_QEMU_MIPS),y) -COBJS-$(CONFIG_CMD_BOOTM) += bootm_qemu_mips.o -else COBJS-$(CONFIG_CMD_BOOTM) += bootm.o -endif SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index ade9af47e..66340ea47 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -17,23 +17,148 @@ DECLARE_GLOBAL_DATA_PTR; #define LINUX_MAX_ENVS 256 #define LINUX_MAX_ARGS 256 +#if defined(CONFIG_QEMU_MALTA) +#define mips_boot_qemu_malta 1 +#else +#define mips_boot_qemu_malta 0 +#endif + static int linux_argc; static char **linux_argv; +static char *linux_argp; static char **linux_env; static char *linux_env_p; static int linux_env_idx; -static void linux_params_init(ulong start, char *commandline); -static void linux_env_set(char *env_name, char *env_val); +static ulong arch_get_sp(void) +{ + ulong ret; + + __asm__ __volatile__("move %0, $sp" : "=r"(ret) : ); + + return ret; +} + +void arch_lmb_reserve(struct lmb *lmb) +{ + ulong sp; + + sp = arch_get_sp(); + debug("## Current stack ends at 0x%08lx\n", sp); + + /* adjust sp by 4K to be safe */ + sp -= 4096; + lmb_reserve(lmb, sp, CONFIG_SYS_SDRAM_BASE + gd->ram_size - sp); +} + +static void linux_cmdline_init(void) +{ + linux_argc = 1; + linux_argv = (char **)UNCACHED_SDRAM(gd->bd->bi_boot_params); + linux_argv[0] = 0; + linux_argp = (char *)(linux_argv + LINUX_MAX_ARGS); +} + +static void linux_cmdline_set(const char *value, size_t len) +{ + linux_argv[linux_argc] = linux_argp; + memcpy(linux_argp, value, len); + linux_argp[len] = 0; + + linux_argp += len + 1; + linux_argc++; +} + +static void linux_cmdline_dump(void) +{ + int i; + + debug("## cmdline argv at 0x%p, argp at 0x%p\n", + linux_argv, linux_argp); + + for (i = 1; i < linux_argc; i++) + debug(" arg %03d: %s\n", i, linux_argv[i]); +} + +static void boot_cmdline_linux(bootm_headers_t *images) +{ + const char *bootargs, *next, *quote; + + linux_cmdline_init(); + + bootargs = getenv("bootargs"); + if (!bootargs) + return; + + next = bootargs; + + while (bootargs && *bootargs && linux_argc < LINUX_MAX_ARGS) { + quote = strchr(bootargs, '"'); + next = strchr(bootargs, ' '); + + while (next && quote && quote < next) { + /* + * we found a left quote before the next blank + * now we have to find the matching right quote + */ + next = strchr(quote + 1, '"'); + if (next) { + quote = strchr(next + 1, '"'); + next = strchr(next + 1, ' '); + } + } + + if (!next) + next = bootargs + strlen(bootargs); + + linux_cmdline_set(bootargs, next - bootargs); + + if (*next) + next++; + + bootargs = next; + } + + linux_cmdline_dump(); +} + +static void linux_env_init(void) +{ + linux_env = (char **)(((ulong) linux_argp + 15) & ~15); + linux_env[0] = 0; + linux_env_p = (char *)(linux_env + LINUX_MAX_ENVS); + linux_env_idx = 0; +} + +static void linux_env_set(const char *env_name, const char *env_val) +{ + if (linux_env_idx < LINUX_MAX_ENVS - 1) { + linux_env[linux_env_idx] = linux_env_p; + + strcpy(linux_env_p, env_name); + linux_env_p += strlen(env_name); + + if (mips_boot_qemu_malta) { + linux_env_p++; + linux_env[++linux_env_idx] = linux_env_p; + } else { + *linux_env_p++ = '='; + } + + strcpy(linux_env_p, env_val); + linux_env_p += strlen(env_val); + + linux_env_p++; + linux_env[++linux_env_idx] = 0; + } +} static void boot_prep_linux(bootm_headers_t *images) { - char *commandline = getenv("bootargs"); char env_buf[12]; - char *cp; - - linux_params_init(UNCACHED_SDRAM(gd->bd->bi_boot_params), commandline); + const char *cp; + ulong rd_start, rd_size; #ifdef CONFIG_MEMSIZE_IN_BYTES sprintf(env_buf, "%lu", (ulong)gd->ram_size); @@ -41,15 +166,20 @@ static void boot_prep_linux(bootm_headers_t *images) #else sprintf(env_buf, "%lu", (ulong)(gd->ram_size >> 20)); debug("## Giving linux memsize in MB, %lu\n", - (ulong)(gd->ram_size >> 20)); + (ulong)(gd->ram_size >> 20)); #endif /* CONFIG_MEMSIZE_IN_BYTES */ + rd_start = UNCACHED_SDRAM(images->initrd_start); + rd_size = images->initrd_end - images->initrd_start; + + linux_env_init(); + linux_env_set("memsize", env_buf); - sprintf(env_buf, "0x%08X", (uint) UNCACHED_SDRAM(images->rd_start)); + sprintf(env_buf, "0x%08lX", rd_start); linux_env_set("initrd_start", env_buf); - sprintf(env_buf, "0x%X", (uint) (images->rd_end - images->rd_start)); + sprintf(env_buf, "0x%lX", rd_size); linux_env_set("initrd_size", env_buf); sprintf(env_buf, "0x%08X", (uint) (gd->bd->bi_flashstart)); @@ -65,33 +195,42 @@ static void boot_prep_linux(bootm_headers_t *images) cp = getenv("eth1addr"); if (cp) linux_env_set("eth1addr", cp); + + if (mips_boot_qemu_malta) + linux_env_set("modetty0", "38400n8r"); } static void boot_jump_linux(bootm_headers_t *images) { - void (*theKernel) (int, char **, char **, int *); - - /* find kernel entry point */ - theKernel = (void (*)(int, char **, char **, int *))images->ep; + typedef void __noreturn (*kernel_entry_t)(int, ulong, ulong, ulong); + kernel_entry_t kernel = (kernel_entry_t) images->ep; + ulong linux_extra = 0; - debug("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) theKernel); + debug("## Transferring control to Linux (at address %p) ...\n", kernel); bootstage_mark(BOOTSTAGE_ID_RUN_OS); + if (mips_boot_qemu_malta) + linux_extra = gd->ram_size; + /* we assume that the kernel is in place */ printf("\nStarting kernel ...\n\n"); - theKernel(linux_argc, linux_argv, linux_env, 0); + kernel(linux_argc, (ulong)linux_argv, (ulong)linux_env, linux_extra); } int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) { /* No need for those on MIPS */ - if (flag & BOOTM_STATE_OS_BD_T || flag & BOOTM_STATE_OS_CMDLINE) + if (flag & BOOTM_STATE_OS_BD_T) return -1; + if (flag & BOOTM_STATE_OS_CMDLINE) { + boot_cmdline_linux(images); + return 0; + } + if (flag & BOOTM_STATE_OS_PREP) { boot_prep_linux(images); return 0; @@ -102,76 +241,10 @@ int do_bootm_linux(int flag, int argc, char * const argv[], return 0; } + boot_cmdline_linux(images); boot_prep_linux(images); boot_jump_linux(images); /* does not return */ return 1; } - -static void linux_params_init(ulong start, char *line) -{ - char *next, *quote, *argp; - - linux_argc = 1; - linux_argv = (char **) start; - linux_argv[0] = 0; - argp = (char *) (linux_argv + LINUX_MAX_ARGS); - - next = line; - - while (line && *line && linux_argc < LINUX_MAX_ARGS) { - quote = strchr(line, '"'); - next = strchr(line, ' '); - - while (next && quote && quote < next) { - /* we found a left quote before the next blank - * now we have to find the matching right quote - */ - next = strchr(quote + 1, '"'); - if (next) { - quote = strchr(next + 1, '"'); - next = strchr(next + 1, ' '); - } - } - - if (!next) - next = line + strlen(line); - - linux_argv[linux_argc] = argp; - memcpy(argp, line, next - line); - argp[next - line] = 0; - - argp += next - line + 1; - linux_argc++; - - if (*next) - next++; - - line = next; - } - - linux_env = (char **) (((ulong) argp + 15) & ~15); - linux_env[0] = 0; - linux_env_p = (char *) (linux_env + LINUX_MAX_ENVS); - linux_env_idx = 0; -} - -static void linux_env_set(char *env_name, char *env_val) -{ - if (linux_env_idx < LINUX_MAX_ENVS - 1) { - linux_env[linux_env_idx] = linux_env_p; - - strcpy(linux_env_p, env_name); - linux_env_p += strlen(env_name); - - strcpy(linux_env_p, "="); - linux_env_p += 1; - - strcpy(linux_env_p, env_val); - linux_env_p += strlen(env_val); - - linux_env_p++; - linux_env[++linux_env_idx] = 0; - } -} diff --git a/arch/mips/lib/bootm_qemu_mips.c b/arch/mips/lib/bootm_qemu_mips.c deleted file mode 100644 index 910ab7363..000000000 --- a/arch/mips/lib/bootm_qemu_mips.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * (C) Copyright 2008 - * Jean-Christophe PLAGNIOL-VILLARD <jcplagniol@jcrosoft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <image.h> -#include <asm/byteorder.h> -#include <asm/addrspace.h> - -DECLARE_GLOBAL_DATA_PTR; - -int do_bootm_linux(int flag, int argc, char * const argv[], - bootm_headers_t *images) -{ - void (*theKernel) (int, char **, char **, int *); - char *bootargs = getenv("bootargs"); - char *start; - uint len; - - /* find kernel entry point */ - theKernel = (void (*)(int, char **, char **, int *))images->ep; - - bootstage_mark(BOOTSTAGE_ID_RUN_OS); - - debug("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) theKernel); - - gd->bd->bi_boot_params = gd->bd->bi_memstart + (16 << 20) - 256; - debug("%-12s= 0x%08lX\n", "boot_params", (ulong)gd->bd->bi_boot_params); - - /* set Magic */ - *(int32_t *)(gd->bd->bi_boot_params - 4) = 0x12345678; - /* set ram_size */ - *(int32_t *)(gd->bd->bi_boot_params - 8) = gd->ram_size; - - start = (char *)gd->bd->bi_boot_params; - - len = strlen(bootargs); - - strncpy(start, bootargs, len + 1); - - start += len; - - len = images->rd_end - images->rd_start; - if (len > 0) { - start += sprintf(start, " rd_start=0x%08X rd_size=0x%0X", - (uint) UNCACHED_SDRAM(images->rd_start), - (uint) len); - } - - /* we assume that the kernel is in place */ - printf("\nStarting kernel ...\n\n"); - - theKernel(0, NULL, NULL, 0); - - /* does not return */ - return 1; -} diff --git a/arch/nds32/include/asm/dma-mapping.h b/arch/nds32/include/asm/dma-mapping.h new file mode 100644 index 000000000..25e5a1b6e --- /dev/null +++ b/arch/nds32/include/asm/dma-mapping.h @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2013 Andes Technology Corporation + * Ken Kuo, Andes Technology Corporation <ken_kuo@andestech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __ASM_NDS_DMA_MAPPING_H +#define __ASM_NDS_DMA_MAPPING_H + +enum dma_data_direction { + DMA_BIDIRECTIONAL = 0, + DMA_TO_DEVICE = 1, + DMA_FROM_DEVICE = 2, +}; + +static void *dma_alloc_coherent(size_t len, unsigned long *handle) +{ + *handle = (unsigned long)memalign(ARCH_DMA_MINALIGN, len); + return (void *)*handle; +} + +static inline unsigned long dma_map_single(volatile void *vaddr, size_t len, + enum dma_data_direction dir) +{ + return (unsigned long)vaddr; +} + +static inline void dma_unmap_single(volatile void *vaddr, size_t len, + unsigned long paddr) +{ +} + +#endif /* __ASM_NDS_DMA_MAPPING_H */ diff --git a/arch/powerpc/cpu/mpc824x/cpu.c b/arch/powerpc/cpu/mpc824x/cpu.c index ee69e495b..eaa4e8707 100644 --- a/arch/powerpc/cpu/mpc824x/cpu.c +++ b/arch/powerpc/cpu/mpc824x/cpu.c @@ -45,12 +45,10 @@ int checkcpu (void) return -1; /* no valid CPU revision info */ } - printf (" at %s MHz:", strmhz (buf, clock)); + printf(" at %s MHz: ", strmhz(buf, clock)); - printf (" %u kB I-Cache", checkicache () >> 10); - printf (" %u kB D-Cache", checkdcache () >> 10); - - puts ("\n"); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache\n"); return 0; } diff --git a/arch/powerpc/cpu/mpc83xx/pcie.c b/arch/powerpc/cpu/mpc83xx/pcie.c index 09970b058..28c25e5fe 100644 --- a/arch/powerpc/cpu/mpc83xx/pcie.c +++ b/arch/powerpc/cpu/mpc83xx/pcie.c @@ -299,6 +299,8 @@ static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg) printf("PCIE%d: ", bus); +#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */ +#define PCI_LTSSM_L0 0x16 /* L0 state */ reg16 = in_le16(hose_cfg_base + PCI_LTSSM); if (reg16 >= PCI_LTSSM_L0) printf("link\n"); diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 0d1e8f1f0..f70f0d747 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -46,6 +46,7 @@ COBJS-$(CONFIG_MPC8568) += ddr-gen2.o COBJS-$(CONFIG_MPC8544) += ddr-gen2.o # supports ddr1/2/3 +COBJS-$(CONFIG_PPC_C29X) += ddr-gen3.o COBJS-$(CONFIG_MPC8572) += ddr-gen3.o COBJS-$(CONFIG_MPC8536) += ddr-gen3.o COBJS-$(CONFIG_MPC8569) += ddr-gen3.o @@ -100,6 +101,7 @@ COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o # SoC specific SERDES support +COBJS-$(CONFIG_PPC_C29X) += c29x_serdes.o COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o COBJS-$(CONFIG_MPC8544) += mpc8544_serdes.o COBJS-$(CONFIG_MPC8548) += mpc8548_serdes.o diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c index 53c6a7faf..39b8e3ecc 100644 --- a/arch/powerpc/cpu/mpc85xx/b4860_ids.c +++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c @@ -41,8 +41,8 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { #ifdef CONFIG_SYS_SRIO struct srio_liodn_id_table srio_liodn_tbl[] = { - SET_SRIO_LIODN_1(1, 307), - SET_SRIO_LIODN_1(2, 387), + SET_SRIO_LIODN_BASE(1, 307), + SET_SRIO_LIODN_BASE(2, 387), }; int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); #endif @@ -112,10 +112,10 @@ int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); #ifdef CONFIG_SYS_DPAA_RMAN struct liodn_id_table rman_liodn_tbl[] = { /* Set RMan block 0-3 liodn offset */ - SET_RMAN_LIODN(0, 678), - SET_RMAN_LIODN(1, 679), - SET_RMAN_LIODN(2, 680), - SET_RMAN_LIODN(3, 681), + SET_RMAN_LIODN(0, 6), + SET_RMAN_LIODN(1, 7), + SET_RMAN_LIODN(2, 8), + SET_RMAN_LIODN(3, 9), }; int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); #endif diff --git a/arch/powerpc/cpu/mpc85xx/c29x_serdes.c b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c new file mode 100644 index 000000000..51972cb7c --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c @@ -0,0 +1,62 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 + +static u32 serdes1_prtcl_map; + +struct serdes_config { + u32 protocol; + u8 lanes[SRDS1_MAX_LANES]; +}; + +static const struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {1, {PCIE1, PCIE1, PCIE1, PCIE1} }, + {2, {PCIE1, PCIE1, PCIE1, PCIE1} }, + {3, {PCIE1, PCIE1, NONE, NONE} }, + {4, {PCIE1, PCIE1, NONE, NONE} }, + {5, {PCIE1, NONE, NONE, NONE} }, + {6, {PCIE1, NONE, NONE, NONE} }, + {} +}; + +int is_serdes_configured(enum srds_prtcl device) +{ + return (1 << device) & serdes1_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + const struct serdes_config *ptr; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + ptr = &serdes1_cfg_tbl[srds_cfg]; + if (!ptr->protocol) + return; + + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = ptr->lanes[lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 5cd02ccde..eea264b15 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -245,6 +245,18 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_A006593 puts("Work-around for Erratum A006593 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571 + if (IS_SVR_REV(svr, 1, 0)) + puts("Work-around for Erratum A003571 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 + puts("Work-around for Erratum A-005812 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447 + if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) || + (SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV)) + puts("Work-around for Erratum I2C-A004447 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 91ac4ee61..1a0196c7c 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -44,10 +44,10 @@ int checkcpu (void) uint major, minor; struct cpu_type *cpu; char buf1[32], buf2[32]; -#if (defined(CONFIG_DDR_CLK_FREQ) || \ - defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); -#endif /* CONFIG_FSL_CORENET */ +#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET) + ccsr_gur_t __iomem *gur = + (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#endif /* * Cornet platforms use ddr sync bit in RCW to indicate sync vs async @@ -135,81 +135,97 @@ int checkcpu (void) if (!(i & 3)) printf ("\n "); printf("CPU%d:%-4s MHz, ", core, - strmhz(buf1, sysinfo.freqProcessor[core])); + strmhz(buf1, sysinfo.freq_processor[core])); } - printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus)); + printf("\n CCB:%-4s MHz,", strmhz(buf1, sysinfo.freq_systembus)); + printf("\n"); #ifdef CONFIG_FSL_CORENET if (ddr_sync == 1) { printf(" DDR:%-4s MHz (%s MT/s data rate) " "(Synchronous), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); } else { printf(" DDR:%-4s MHz (%s MT/s data rate) " "(Asynchronous), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); } #else switch (ddr_ratio) { case 0x0: printf(" DDR:%-4s MHz (%s MT/s data rate), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); break; case 0x7: printf(" DDR:%-4s MHz (%s MT/s data rate) " "(Synchronous), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); break; default: printf(" DDR:%-4s MHz (%s MT/s data rate) " "(Asynchronous), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); break; } #endif #if defined(CONFIG_FSL_LBC) - if (sysinfo.freqLocalBus > LCRR_CLKDIV) { - printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); + if (sysinfo.freq_localbus > LCRR_CLKDIV) { + printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus)); } else { printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", - sysinfo.freqLocalBus); + sysinfo.freq_localbus); } #endif #if defined(CONFIG_FSL_IFC) - printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); + printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus)); #endif #ifdef CONFIG_CPM2 - printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); + printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freq_systembus)); #endif #ifdef CONFIG_QE - printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE)); + printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freq_qe)); #endif #ifdef CONFIG_SYS_DPAA_FMAN for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) { printf(" FMAN%d: %s MHz\n", i + 1, - strmhz(buf1, sysinfo.freqFMan[i])); + strmhz(buf1, sysinfo.freq_fman[i])); } #endif #ifdef CONFIG_SYS_DPAA_QBMAN - printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freqQMAN)); + printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freq_qman)); #endif #ifdef CONFIG_SYS_DPAA_PME - printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME)); + printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freq_pme)); #endif - puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n"); + puts("L1: D-cache 32 KiB enabled\n I-cache 32 KiB enabled\n"); + +#ifdef CONFIG_FSL_CORENET + /* Display the RCW, so that no one gets confused as to what RCW + * we're actually using for this boot. + */ + puts("Reset Configuration Word (RCW):"); + for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { + u32 rcw = in_be32(&gur->rcwsr[i]); + + if ((i % 4) == 0) + printf("\n %08x:", i * 4); + printf(" %08x", rcw); + } + puts("\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 25beda233..6036333ea 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -22,6 +22,7 @@ #include <asm/fsl_law.h> #include <asm/fsl_serdes.h> #include <asm/fsl_srio.h> +#include <fsl_usb.h> #include <hwconfig.h> #include <linux/compiler.h> #include "mp.h" @@ -166,7 +167,8 @@ static void enable_cpc(void) } - printf("Corenet Platform Cache: %d KB enabled\n", size); + puts("Corenet Platform Cache: "); + print_size(size * 1024, " enabled\n"); } static void invalidate_cpc(void) @@ -355,7 +357,9 @@ int cpu_init_r(void) extern int spin_table_compat; const char *spin; #endif - +#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571 + ccsr_sec_t __iomem *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR; +#endif #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011) /* @@ -399,6 +403,14 @@ int cpu_init_r(void) sync(); } #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 + /* + * A-005812 workaround sets bit 32 of SPR 976 for SoCs running + * in write shadow mode. Checking DCWS before setting SPR 976. + */ + if (mfspr(L1CSR2) & L1CSR2_DCWS) + mtspr(SPRN_HDBCR0, (mfspr(SPRN_HDBCR0) | 0x80000000)); +#endif #if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) spin = getenv("spin_table_compat"); @@ -448,28 +460,28 @@ int cpu_init_r(void) case 0x1: if (ver == SVR_8540 || ver == SVR_8560 || ver == SVR_8541 || ver == SVR_8555) { - puts("128 KB "); - /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */ + puts("128 KiB "); + /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 KiBibyte) */ cache_ctl = 0xc4000000; } else { - puts("256 KB "); + puts("256 KiB "); cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */ } break; case 0x2: if (ver == SVR_8540 || ver == SVR_8560 || ver == SVR_8541 || ver == SVR_8555) { - puts("256 KB "); - /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */ + puts("256 KiB "); + /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 KiBibyte) */ cache_ctl = 0xc8000000; } else { - puts ("512 KB "); + puts("512 KiB "); /* set L2E=1, L2I=1, & L2SRAM=0 */ cache_ctl = 0xc0000000; } break; case 0x3: - puts("1024 KB "); + puts("1024 KiB "); /* set L2E=1, L2I=1, & L2SRAM=0 */ cache_ctl = 0xc0000000; break; @@ -517,13 +529,14 @@ int cpu_init_r(void) if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) { while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E)) ; - printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64); + print_size((l2cfg0 & 0x3fff) * 64 * 1024, " enabled\n"); } skip_l2: #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) if (l2cache->l2csr0 & L2CSR0_L2E) - printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64); + print_size((l2cache->l2cfg0 & 0x3fff) * 64 * 1024, + " enabled\n"); enable_cluster_l2(); #else @@ -532,8 +545,16 @@ skip_l2: enable_cpc(); +#ifndef CONFIG_SYS_FSL_NO_SERDES /* needs to be in ram since code uses global static vars */ fsl_serdes_init(); +#endif + +#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571 +#define MCFGR_AXIPIPE 0x000000f0 + if (IS_SVR_REV(svr, 1, 0)) + clrbits_be32(&sec->mcfgr, MCFGR_AXIPIPE); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_A005871 if (IS_SVR_REV(svr, 1, 0)) { @@ -595,7 +616,7 @@ skip_l2: #ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE { - ccsr_usb_phy_t *usb_phy1 = + struct ccsr_usb_phy __iomem *usb_phy1 = (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR; out_be32(&usb_phy1->usb_enable_override, CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE); @@ -603,7 +624,7 @@ skip_l2: #endif #ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE { - ccsr_usb_phy_t *usb_phy2 = + struct ccsr_usb_phy __iomem *usb_phy2 = (void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR; out_be32(&usb_phy2->usb_enable_override, CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE); @@ -625,7 +646,7 @@ skip_l2: #endif #if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE) - ccsr_usb_phy_t *usb_phy = + struct ccsr_usb_phy __iomem *usb_phy = (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR; setbits_be32(&usb_phy->pllprg[1], CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN | diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c index 8a86819fb..4dd8c0b5b 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c @@ -15,7 +15,7 @@ #endif void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i; volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c index a70586252..542bc84ac 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c @@ -16,7 +16,7 @@ #endif void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i; ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index c5b47200e..1be51d330 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -15,8 +15,18 @@ #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL #endif + +/* + * regs has the to-be-set values for DDR controller registers + * ctrl_num is the DDR controller number + * step: 0 goes through the initialization in one pass + * 1 sets registers and returns before enabling controller + * 2 resumes from step 1 and continues to initialize + * Dividing the initialization to two steps to deassert DDR reset signal + * to comply with JEDEC specs for RDIMMs. + */ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i, bus_width; volatile ccsr_ddr_t *ddr; @@ -54,6 +64,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, return; } + if (step == 2) + goto step2; + if (regs->ddr_eor) out_be32(&ddr->eor, regs->ddr_eor); #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 @@ -123,10 +136,17 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5); out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); +#ifndef CONFIG_SYS_FSL_DDR_EMU + /* + * Skip these two registers if running on emulator + * because emulator doesn't have skew between bytes. + */ + if (regs->ddr_wrlvl_cntl_2) out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2); if (regs->ddr_wrlvl_cntl_3) out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3); +#endif out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); @@ -150,6 +170,20 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->debug[21], 0x24000000); #endif /* CONFIG_SYS_FSL_ERRATUM_DDR_A003474 */ + /* + * For RDIMMs, JEDEC spec requires clocks to be stable before reset is + * deasserted. Clocks start when any chip select is enabled and clock + * control register is set. Because all DDR components are connected to + * one reset signal, this needs to be done in two steps. Step 1 is to + * get the clocks started. Step 2 resumes after reset signal is + * deasserted. + */ + if (step == 1) { + udelay(200); + return; + } + +step2: /* Set, but do not enable the memory */ temp_sdram_cfg = regs->ddr_sdram_cfg; temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN); diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index cfaa2edce..533d47ab4 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -403,22 +403,22 @@ static void ft_fixup_dpaa_clks(void *blob) get_sys_info(&sysinfo); #ifdef CONFIG_SYS_DPAA_FMAN ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET, - sysinfo.freqFMan[0]); + sysinfo.freq_fman[0]); #if (CONFIG_SYS_NUM_FMAN == 2) ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET, - sysinfo.freqFMan[1]); + sysinfo.freq_fman[1]); #endif #endif #ifdef CONFIG_SYS_DPAA_QBMAN do_fixup_by_compat_u32(blob, "fsl,qman", - "clock-frequency", sysinfo.freqQMAN, 1); + "clock-frequency", sysinfo.freq_qman, 1); #endif #ifdef CONFIG_SYS_DPAA_PME do_fixup_by_compat_u32(blob, "fsl,pme", - "clock-frequency", sysinfo.freqPME, 1); + "clock-frequency", sysinfo.freq_pme, 1); #endif } #else @@ -476,7 +476,7 @@ void fdt_fixup_fman_firmware(void *blob) if (!p) return; - fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 0); + fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 16); if (!fmanfw) return; @@ -604,15 +604,19 @@ void ft_cpu_setup(void *blob, bd_t *bd) fdt_add_enet_stashing(blob); +#ifndef CONFIG_FSL_TBCLK_EXTRA_DIV +#define CONFIG_FSL_TBCLK_EXTRA_DIV 1 +#endif do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "timebase-frequency", get_tbclk(), 1); + "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV, + 1); do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "bus-frequency", bd->bi_busfreq, 1); get_sys_info(&sysinfo); off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); while (off != -FDT_ERR_NOTFOUND) { u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); - val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]); + val = cpu_to_fdt32(sysinfo.freq_processor[*reg]); fdt_setprop(blob, off, "clock-frequency", &val, 4); off = fdt_node_offset_by_prop_value(blob, off, "device_type", "cpu", 4); diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c index de6bd11a1..39d9409d6 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -13,8 +13,12 @@ #include <asm/errno.h> #include "fsl_corenet2_serdes.h" +#ifdef CONFIG_SYS_FSL_SRDS_1 static u64 serdes1_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 static u64 serdes2_prtcl_map; +#endif #ifdef CONFIG_SYS_FSL_SRDS_3 static u64 serdes3_prtcl_map; #endif @@ -78,8 +82,12 @@ int is_serdes_configured(enum srds_prtcl device) { u64 ret = 0; +#ifdef CONFIG_SYS_FSL_SRDS_1 ret |= (1ULL << device) & serdes1_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 ret |= (1ULL << device) & serdes2_prtcl_map; +#endif #ifdef CONFIG_SYS_FSL_SRDS_3 ret |= (1ULL << device) & serdes3_prtcl_map; #endif @@ -97,14 +105,18 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device) int i; switch (sd) { +#ifdef CONFIG_SYS_FSL_SRDS_1 case FSL_SRDS_1: cfg &= FSL_CORENET2_RCWSR4_SRDS1_PRTCL; cfg >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; break; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 case FSL_SRDS_2: cfg &= FSL_CORENET2_RCWSR4_SRDS2_PRTCL; cfg >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; break; +#endif #ifdef CONFIG_SYS_FSL_SRDS_3 case FSL_SRDS_3: cfg &= FSL_CORENET2_RCWSR4_SRDS3_PRTCL; @@ -163,14 +175,18 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) void fsl_serdes_init(void) { +#ifdef CONFIG_SYS_FSL_SRDS_1 serdes1_prtcl_map = serdes_init(FSL_SRDS_1, CONFIG_SYS_FSL_CORENET_SERDES_ADDR, FSL_CORENET2_RCWSR4_SRDS1_PRTCL, FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT); +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 serdes2_prtcl_map = serdes_init(FSL_SRDS_2, CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000, FSL_CORENET2_RCWSR4_SRDS2_PRTCL, FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT); +#endif #ifdef CONFIG_SYS_FSL_SRDS_3 serdes3_prtcl_map = serdes_init(FSL_SRDS_3, CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000, diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h index 6de572d59..d515b234a 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h @@ -9,5 +9,4 @@ int is_serdes_prtcl_valid(int serdes, u32 prtcl); int serdes_lane_enabled(int lane); -enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); #endif /* __FSL_CORENET2_SERDES_H */ diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 15bbbc15a..c15e83b52 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -226,6 +226,21 @@ __secondary_start_page: 2: #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 + /* + * A-005812 workaround sets bit 32 of SPR 976 for SoCs running in + * write shadow mode. This code should run after other code setting + * DCWS. + */ + mfspr r3,L1CSR2 + andis. r3,r3,(L1CSR2_DCWS)@h + beq 1f + mfspr r3, SPRN_HDBCR0 + oris r3, r3, 0x8000 + mtspr SPRN_HDBCR0, r3 +1: +#endif + #ifdef CONFIG_BACKSIDE_L2_CACHE /* skip L2 setup on P2040/P2040E as they have no L2 */ mfspr r3,SPRN_SVR diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index f093960fe..07690f97b 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -20,7 +20,7 @@ DECLARE_GLOBAL_DATA_PTR; /* --------------------------------------------------------------- */ -void get_sys_info (sys_info_t * sysInfo) +void get_sys_info(sys_info_t *sys_info) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #ifdef CONFIG_FSL_IFC @@ -46,7 +46,7 @@ void get_sys_info (sys_info_t * sysInfo) [14] = 3, /* CC4 PPL / 4 */ }; - const u8 core_cplx_PLL_div[16] = { + const u8 core_cplx_pll_div[16] = { [ 0] = 1, /* CC1 PPL / 1 */ [ 1] = 2, /* CC1 PPL / 2 */ [ 2] = 4, /* CC1 PPL / 4 */ @@ -60,26 +60,26 @@ void get_sys_info (sys_info_t * sysInfo) [13] = 2, /* CC4 PPL / 2 */ [14] = 4, /* CC4 PPL / 4 */ }; - uint i, freqCC_PLL[6], rcw_tmp; + uint i, freq_cc_pll[6], rcw_tmp; uint ratio[6]; unsigned long sysclk = CONFIG_SYS_CLK_FREQ; uint mem_pll_rat; - sysInfo->freqSystemBus = sysclk; + sys_info->freq_systembus = sysclk; #ifdef CONFIG_DDR_CLK_FREQ - sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ; + sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ; #else - sysInfo->freqDDRBus = sysclk; + sys_info->freq_ddrbus = sysclk; #endif - sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; + sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT) & FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK; if (mem_pll_rat > 2) - sysInfo->freqDDRBus *= mem_pll_rat; + sys_info->freq_ddrbus *= mem_pll_rat; else - sysInfo->freqDDRBus = sysInfo->freqSystemBus * mem_pll_rat; + sys_info->freq_ddrbus = sys_info->freq_systembus * mem_pll_rat; ratio[0] = (in_be32(&clk->pllc1gsr) >> 1) & 0x3f; ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f; @@ -89,9 +89,9 @@ void get_sys_info (sys_info_t * sysInfo) ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f; for (i = 0; i < 6; i++) { if (ratio[i] > 4) - freqCC_PLL[i] = sysclk * ratio[i]; + freq_cc_pll[i] = sysclk * ratio[i]; else - freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i]; + freq_cc_pll[i] = sys_info->freq_systembus * ratio[i]; } #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* @@ -110,8 +110,8 @@ void get_sys_info (sys_info_t * sysInfo) printf("Unsupported architecture configuration" " in function %s\n", __func__); cplx_pll += (cluster / 2) * 3; - sysInfo->freqProcessor[cpu] = - freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; + sys_info->freq_processor[cpu] = + freq_cc_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel]; } #ifdef CONFIG_PPC_B4860 #define FM1_CLK_SEL 0xe0000000 @@ -127,63 +127,63 @@ void get_sys_info (sys_info_t * sysInfo) #ifdef CONFIG_SYS_DPAA_PME switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) { case 1: - sysInfo->freqPME = freqCC_PLL[0]; + sys_info->freq_pme = freq_cc_pll[0]; break; case 2: - sysInfo->freqPME = freqCC_PLL[0] / 2; + sys_info->freq_pme = freq_cc_pll[0] / 2; break; case 3: - sysInfo->freqPME = freqCC_PLL[0] / 3; + sys_info->freq_pme = freq_cc_pll[0] / 3; break; case 4: - sysInfo->freqPME = freqCC_PLL[0] / 4; + sys_info->freq_pme = freq_cc_pll[0] / 4; break; case 6: - sysInfo->freqPME = freqCC_PLL[1] / 2; + sys_info->freq_pme = freq_cc_pll[1] / 2; break; case 7: - sysInfo->freqPME = freqCC_PLL[1] / 3; + sys_info->freq_pme = freq_cc_pll[1] / 3; break; default: printf("Error: Unknown PME clock select!\n"); case 0: - sysInfo->freqPME = sysInfo->freqSystemBus / 2; + sys_info->freq_pme = sys_info->freq_systembus / 2; break; } #endif #ifdef CONFIG_SYS_DPAA_QBMAN - sysInfo->freqQMAN = sysInfo->freqSystemBus / 2; + sys_info->freq_qman = sys_info->freq_systembus / 2; #endif #ifdef CONFIG_SYS_DPAA_FMAN switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) { case 1: - sysInfo->freqFMan[0] = freqCC_PLL[3]; + sys_info->freq_fman[0] = freq_cc_pll[3]; break; case 2: - sysInfo->freqFMan[0] = freqCC_PLL[3] / 2; + sys_info->freq_fman[0] = freq_cc_pll[3] / 2; break; case 3: - sysInfo->freqFMan[0] = freqCC_PLL[3] / 3; + sys_info->freq_fman[0] = freq_cc_pll[3] / 3; break; case 4: - sysInfo->freqFMan[0] = freqCC_PLL[3] / 4; + sys_info->freq_fman[0] = freq_cc_pll[3] / 4; break; case 5: - sysInfo->freqFMan[0] = sysInfo->freqSystemBus; + sys_info->freq_fman[0] = sys_info->freq_systembus; break; case 6: - sysInfo->freqFMan[0] = freqCC_PLL[4] / 2; + sys_info->freq_fman[0] = freq_cc_pll[4] / 2; break; case 7: - sysInfo->freqFMan[0] = freqCC_PLL[4] / 3; + sys_info->freq_fman[0] = freq_cc_pll[4] / 3; break; default: printf("Error: Unknown FMan1 clock select!\n"); case 0: - sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2; + sys_info->freq_fman[0] = sys_info->freq_systembus / 2; break; } #if (CONFIG_SYS_NUM_FMAN) == 2 @@ -192,27 +192,27 @@ void get_sys_info (sys_info_t * sysInfo) rcw_tmp = in_be32(&gur->rcwsr[15]); switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) { case 1: - sysInfo->freqFMan[1] = freqCC_PLL[4]; + sys_info->freq_fman[1] = freq_cc_pll[4]; break; case 2: - sysInfo->freqFMan[1] = freqCC_PLL[4] / 2; + sys_info->freq_fman[1] = freq_cc_pll[4] / 2; break; case 3: - sysInfo->freqFMan[1] = freqCC_PLL[4] / 3; + sys_info->freq_fman[1] = freq_cc_pll[4] / 3; break; case 4: - sysInfo->freqFMan[1] = freqCC_PLL[4] / 4; + sys_info->freq_fman[1] = freq_cc_pll[4] / 4; break; case 6: - sysInfo->freqFMan[1] = freqCC_PLL[3] / 2; + sys_info->freq_fman[1] = freq_cc_pll[3] / 2; break; case 7: - sysInfo->freqFMan[1] = freqCC_PLL[3] / 3; + sys_info->freq_fman[1] = freq_cc_pll[3] / 3; break; default: printf("Error: Unknown FMan2 clock select!\n"); case 0: - sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2; + sys_info->freq_fman[1] = sys_info->freq_systembus / 2; break; } #endif /* CONFIG_SYS_NUM_FMAN == 2 */ @@ -225,8 +225,8 @@ void get_sys_info (sys_info_t * sysInfo) & 0xf; u32 cplx_pll = core_cplx_PLL[c_pll_sel]; - sysInfo->freqProcessor[cpu] = - freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; + sys_info->freq_processor[cpu] = + freq_cc_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel]; } #define PME_CLK_SEL 0x80000000 #define FM1_CLK_SEL 0x40000000 @@ -246,43 +246,43 @@ void get_sys_info (sys_info_t * sysInfo) #ifdef CONFIG_SYS_DPAA_PME if (rcw_tmp & PME_CLK_SEL) { if (rcw_tmp & HWA_ASYNC_DIV) - sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 4; + sys_info->freq_pme = freq_cc_pll[HWA_CC_PLL] / 4; else - sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 2; + sys_info->freq_pme = freq_cc_pll[HWA_CC_PLL] / 2; } else { - sysInfo->freqPME = sysInfo->freqSystemBus / 2; + sys_info->freq_pme = sys_info->freq_systembus / 2; } #endif #ifdef CONFIG_SYS_DPAA_FMAN if (rcw_tmp & FM1_CLK_SEL) { if (rcw_tmp & HWA_ASYNC_DIV) - sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 4; + sys_info->freq_fman[0] = freq_cc_pll[HWA_CC_PLL] / 4; else - sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 2; + sys_info->freq_fman[0] = freq_cc_pll[HWA_CC_PLL] / 2; } else { - sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2; + sys_info->freq_fman[0] = sys_info->freq_systembus / 2; } #if (CONFIG_SYS_NUM_FMAN) == 2 if (rcw_tmp & FM2_CLK_SEL) { if (rcw_tmp & HWA_ASYNC_DIV) - sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 4; + sys_info->freq_fman[1] = freq_cc_pll[HWA_CC_PLL] / 4; else - sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 2; + sys_info->freq_fman[1] = freq_cc_pll[HWA_CC_PLL] / 2; } else { - sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2; + sys_info->freq_fman[1] = sys_info->freq_systembus / 2; } #endif #endif #ifdef CONFIG_SYS_DPAA_QBMAN - sysInfo->freqQMAN = sysInfo->freqSystemBus / 2; + sys_info->freq_qman = sys_info->freq_systembus / 2; #endif #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ #else /* CONFIG_FSL_CORENET */ - uint plat_ratio, e500_ratio, half_freqSystemBus; + uint plat_ratio, e500_ratio, half_freq_systembus; int i; #ifdef CONFIG_QE __maybe_unused u32 qe_ratio; @@ -290,40 +290,40 @@ void get_sys_info (sys_info_t * sysInfo) plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; - sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ; + sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ; /* Divide before multiply to avoid integer * overflow for processor speeds above 2GHz */ - half_freqSystemBus = sysInfo->freqSystemBus/2; + half_freq_systembus = sys_info->freq_systembus/2; for (i = 0; i < cpu_numcores(); i++) { e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f; - sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus; + sys_info->freq_processor[i] = e500_ratio * half_freq_systembus; } - /* Note: freqDDRBus is the MCLK frequency, not the data rate. */ - sysInfo->freqDDRBus = sysInfo->freqSystemBus; + /* Note: freq_ddrbus is the MCLK frequency, not the data rate. */ + sys_info->freq_ddrbus = sys_info->freq_systembus; #ifdef CONFIG_DDR_CLK_FREQ { u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; if (ddr_ratio != 0x7) - sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ; + sys_info->freq_ddrbus = ddr_ratio * CONFIG_DDR_CLK_FREQ; } #endif #ifdef CONFIG_QE #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025) - sysInfo->freqQE = sysInfo->freqSystemBus; + sys_info->freq_qe = sys_info->freq_systembus; #else qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO) >> MPC85xx_PORPLLSR_QE_RATIO_SHIFT; - sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ; + sys_info->freq_qe = qe_ratio * CONFIG_SYS_CLK_FREQ; #endif #endif #ifdef CONFIG_SYS_DPAA_FMAN - sysInfo->freqFMan[0] = sysInfo->freqSystemBus; + sys_info->freq_fman[0] = sys_info->freq_systembus; #endif #endif /* CONFIG_FSL_CORENET */ @@ -350,10 +350,10 @@ void get_sys_info (sys_info_t * sysInfo) */ lcrr_div *= 2; #endif - sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div; + sys_info->freq_localbus = sys_info->freq_systembus / lcrr_div; } else { /* In case anyone cares what the unknown value is */ - sysInfo->freqLocalBus = lcrr_div; + sys_info->freq_localbus = lcrr_div; } #endif @@ -361,7 +361,7 @@ void get_sys_info (sys_info_t * sysInfo) ccr = in_be32(&ifc_regs->ifc_ccr); ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1; - sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr; + sys_info->freq_localbus = sys_info->freq_systembus / ccr; #endif } @@ -382,13 +382,13 @@ int get_clocks (void) dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT; #endif get_sys_info (&sys_info); - gd->cpu_clk = sys_info.freqProcessor[0]; - gd->bus_clk = sys_info.freqSystemBus; - gd->mem_clk = sys_info.freqDDRBus; - gd->arch.lbc_clk = sys_info.freqLocalBus; + gd->cpu_clk = sys_info.freq_processor[0]; + gd->bus_clk = sys_info.freq_systembus; + gd->mem_clk = sys_info.freq_ddrbus; + gd->arch.lbc_clk = sys_info.freq_localbus; #ifdef CONFIG_QE - gd->arch.qe_clk = sys_info.freqQE; + gd->arch.qe_clk = sys_info.freq_qe; gd->arch.brg_clk = gd->arch.qe_clk / 2; #endif /* @@ -400,7 +400,7 @@ int get_clocks (void) */ #if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \ defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555) - gd->arch.i2c1_clk = sys_info.freqSystemBus; + gd->arch.i2c1_clk = sys_info.freq_systembus; #elif defined(CONFIG_MPC8544) /* * On the 8544, the I2C clock is the same as the SEC clock. This can be @@ -410,12 +410,12 @@ int get_clocks (void) * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544. */ if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG) - gd->arch.i2c1_clk = sys_info.freqSystemBus / 3; + gd->arch.i2c1_clk = sys_info.freq_systembus / 3; else - gd->arch.i2c1_clk = sys_info.freqSystemBus / 2; + gd->arch.i2c1_clk = sys_info.freq_systembus / 2; #else /* Most 85xx SOCs use CCB/2, so this is the default behavior. */ - gd->arch.i2c1_clk = sys_info.freqSystemBus / 2; + gd->arch.i2c1_clk = sys_info.freq_systembus / 2; #endif gd->arch.i2c2_clk = gd->arch.i2c1_clk; @@ -429,7 +429,7 @@ int get_clocks (void) #endif /* defined(CONFIG_FSL_ESDHC) */ #if defined(CONFIG_CPM2) - gd->arch.vco_out = 2*sys_info.freqSystemBus; + gd->arch.vco_out = 2*sys_info.freq_systembus; gd->arch.cpm_clk = gd->arch.vco_out / 2; gd->arch.scc_clk = gd->arch.vco_out / 4; gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1))); diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index cfc3a60d2..ad57a9cfa 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -33,7 +33,8 @@ #define MINIMAL_SPL #endif -#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) +#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && \ + !defined(CONFIG_SECURE_BOOT) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define NOR_BOOT #endif diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c index e173cb5f9..54c1cfd2c 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c @@ -65,8 +65,8 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { #endif struct srio_liodn_id_table srio_liodn_tbl[] = { - SET_SRIO_LIODN_1(1, 307), - SET_SRIO_LIODN_1(2, 387), + SET_SRIO_LIODN_BASE(1, 307), + SET_SRIO_LIODN_BASE(2, 387), }; int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); @@ -159,10 +159,10 @@ int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); #ifdef CONFIG_SYS_DPAA_RMAN struct liodn_id_table rman_liodn_tbl[] = { /* Set RMan block 0-3 liodn offset */ - SET_RMAN_LIODN(0, 678), - SET_RMAN_LIODN(1, 679), - SET_RMAN_LIODN(2, 680), - SET_RMAN_LIODN(3, 681), + SET_RMAN_LIODN(0, 6), + SET_RMAN_LIODN(1, 7), + SET_RMAN_LIODN(2, 8), + SET_RMAN_LIODN(3, 9), }; int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); #endif diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c index ed88602c3..ff55e3c35 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c @@ -106,25 +106,25 @@ static const struct serdes_config serdes2_cfg_tbl[] = { SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, {38, {NONE, NONE, QSGMII_FM2_B, NONE, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {56, {XFI_FM1_MAC9, XFI_FM1_MAC10, XFI_FM2_MAC10, XFI_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index da3c345d6..8748ecd14 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -39,7 +39,8 @@ void init_tlbs(void) return ; } -#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_NAND_SPL) && \ + (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL)) void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, phys_addr_t *rpn) { diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds index 08188d75e..85ec74ba9 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds @@ -44,6 +44,11 @@ SECTIONS } _edata = .; + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + . = ALIGN(8); __init_begin = .; __init_end = .; diff --git a/arch/powerpc/cpu/mpc86xx/cpu.c b/arch/powerpc/cpu/mpc86xx/cpu.c index d6b28dd07..30518544d 100644 --- a/arch/powerpc/cpu/mpc86xx/cpu.c +++ b/arch/powerpc/cpu/mpc86xx/cpu.c @@ -72,21 +72,21 @@ checkcpu(void) get_sys_info(&sysinfo); puts("Clock Configuration:\n"); - printf(" CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor)); - printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); + printf(" CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freq_processor)); + printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freq_systembus)); printf(" DDR:%-4s MHz (%s MT/s data rate), ", - strmhz(buf1, sysinfo.freqSystemBus / 2), - strmhz(buf2, sysinfo.freqSystemBus)); + strmhz(buf1, sysinfo.freq_systembus / 2), + strmhz(buf2, sysinfo.freq_systembus)); - if (sysinfo.freqLocalBus > LCRR_CLKDIV) { - printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); + if (sysinfo.freq_localbus > LCRR_CLKDIV) { + printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus)); } else { printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", - sysinfo.freqLocalBus); + sysinfo.freq_localbus); } - puts("L1: D-cache 32 KB enabled\n"); - puts(" I-cache 32 KB enabled\n"); + puts("L1: D-cache 32 KiB enabled\n"); + puts(" I-cache 32 KiB enabled\n"); puts("L2: "); if (get_l2cr() & 0x80000000) { @@ -95,7 +95,7 @@ checkcpu(void) #elif defined(CONFIG_MPC8641) puts("512"); #endif - puts(" KB enabled\n"); + puts(" KiB enabled\n"); } else { puts("Disabled\n"); } @@ -131,7 +131,7 @@ get_tbclk(void) sys_info_t sys_info; get_sys_info(&sys_info); - return (sys_info.freqSystemBus + 3L) / 4L; + return (sys_info.freq_systembus + 3L) / 4L; } diff --git a/arch/powerpc/cpu/mpc86xx/ddr-8641.c b/arch/powerpc/cpu/mpc86xx/ddr-8641.c index 92ba26dc8..33a91f9f7 100644 --- a/arch/powerpc/cpu/mpc86xx/ddr-8641.c +++ b/arch/powerpc/cpu/mpc86xx/ddr-8641.c @@ -15,7 +15,7 @@ #endif void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i; volatile ccsr_ddr_t *ddr; diff --git a/arch/powerpc/cpu/mpc86xx/speed.c b/arch/powerpc/cpu/mpc86xx/speed.c index ea366ab9e..854d02b5c 100644 --- a/arch/powerpc/cpu/mpc86xx/speed.c +++ b/arch/powerpc/cpu/mpc86xx/speed.c @@ -19,7 +19,7 @@ DECLARE_GLOBAL_DATA_PTR; /* used in some defintiions of CONFIG_SYS_CLK_FREQ */ extern unsigned long get_board_sys_clk(unsigned long dummy); -void get_sys_info(sys_info_t *sysInfo) +void get_sys_info(sys_info_t *sys_info) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; @@ -31,7 +31,7 @@ void get_sys_info(sys_info_t *sysInfo) switch (plat_ratio) { case 0x0: - sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ; + sys_info->freq_systembus = 16 * CONFIG_SYS_CLK_FREQ; break; case 0x02: case 0x03: @@ -43,10 +43,10 @@ void get_sys_info(sys_info_t *sysInfo) case 0x0a: case 0x0c: case 0x10: - sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ; + sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ; break; default: - sysInfo->freqSystemBus = 0; + sys_info->freq_systembus = 0; break; } @@ -55,25 +55,26 @@ void get_sys_info(sys_info_t *sysInfo) switch (e600_ratio) { case 0x10: - sysInfo->freqProcessor = 2 * sysInfo->freqSystemBus; + sys_info->freq_processor = 2 * sys_info->freq_systembus; break; case 0x19: - sysInfo->freqProcessor = 5 * sysInfo->freqSystemBus / 2; + sys_info->freq_processor = 5 * sys_info->freq_systembus / 2; break; case 0x20: - sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus; + sys_info->freq_processor = 3 * sys_info->freq_systembus; break; case 0x39: - sysInfo->freqProcessor = 7 * sysInfo->freqSystemBus / 2; + sys_info->freq_processor = 7 * sys_info->freq_systembus / 2; break; case 0x28: - sysInfo->freqProcessor = 4 * sysInfo->freqSystemBus; + sys_info->freq_processor = 4 * sys_info->freq_systembus; break; case 0x1d: - sysInfo->freqProcessor = 9 * sysInfo->freqSystemBus / 2; + sys_info->freq_processor = 9 * sys_info->freq_systembus / 2; break; default: - sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus; + sys_info->freq_processor = e600_ratio + + sys_info->freq_systembus; break; } @@ -84,10 +85,11 @@ void get_sys_info(sys_info_t *sysInfo) lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV; #endif if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { - sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2); + sys_info->freq_localbus = sys_info->freq_systembus + / (lcrr_div * 2); } else { /* In case anyone cares what the unknown value is */ - sysInfo->freqLocalBus = lcrr_div; + sys_info->freq_localbus = lcrr_div; } } @@ -102,9 +104,9 @@ int get_clocks(void) sys_info_t sys_info; get_sys_info(&sys_info); - gd->cpu_clk = sys_info.freqProcessor; - gd->bus_clk = sys_info.freqSystemBus; - gd->arch.lbc_clk = sys_info.freqLocalBus; + gd->cpu_clk = sys_info.freq_processor; + gd->bus_clk = sys_info.freq_systembus; + gd->arch.lbc_clk = sys_info.freq_localbus; /* * The base clock for I2C depends on the actual SOC. Unfortunately, @@ -114,9 +116,9 @@ int get_clocks(void) * AN2919. */ #ifdef CONFIG_MPC8610 - gd->arch.i2c1_clk = sys_info.freqSystemBus; + gd->arch.i2c1_clk = sys_info.freq_systembus; #else - gd->arch.i2c1_clk = sys_info.freqSystemBus / 2; + gd->arch.i2c1_clk = sys_info.freq_systembus / 2; #endif gd->arch.i2c2_clk = gd->arch.i2c1_clk; @@ -138,7 +140,7 @@ ulong get_bus_freq(ulong dummy) sys_info_t sys_info; get_sys_info(&sys_info); - val = sys_info.freqSystemBus; + val = sys_info.freq_systembus; return val; } diff --git a/arch/powerpc/cpu/mpc8xx/cpu.c b/arch/powerpc/cpu/mpc8xx/cpu.c index 1550045e6..5c96b5fe1 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu.c +++ b/arch/powerpc/cpu/mpc8xx/cpu.c @@ -136,10 +136,8 @@ static int check_CPU (long clock, uint pvr, uint immr) #else printf (" at %s MHz: ", strmhz (buf, clock)); #endif - printf ("%u kB I-Cache %u kB D-Cache", - checkicache () >> 10, - checkdcache () >> 10 - ); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache"); /* do we have a FEC (860T/P or 852/859/866/885)? */ @@ -204,10 +202,10 @@ static int check_CPU (long clock, uint pvr, uint immr) printf ("unknown MPC857 (0x%08x)", k); #endif - printf (" at %s MHz:", strmhz (buf, clock)); + printf(" at %s MHz: ", strmhz(buf, clock)); - printf (" %u kB I-Cache", checkicache () >> 10); - printf (" %u kB D-Cache", checkdcache () >> 10); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache"); /* lets check and see if we're running on a 862T (or P?) */ @@ -265,10 +263,10 @@ static int check_CPU (long clock, uint pvr, uint immr) if (suf) printf ("PPC823ZTnn%s", suf); - printf (" at %s MHz:", strmhz (buf, clock)); + printf(" at %s MHz: ", strmhz(buf, clock)); - printf (" %u kB I-Cache", checkicache () >> 10); - printf (" %u kB D-Cache", checkdcache () >> 10); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache"); /* lets check and see if we're running on a 860T (or P?) */ @@ -321,10 +319,10 @@ static int check_CPU (long clock, uint pvr, uint immr) default: printf ("unknown MPC850 (0x%08x)", k); } - printf (" at %s MHz:", strmhz (buf, clock)); + printf(" at %s MHz: ", strmhz(buf, clock)); - printf (" %u kB I-Cache", checkicache () >> 10); - printf (" %u kB D-Cache", checkdcache () >> 10); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache"); /* lets check and see if we're running on a 850T (or P?) */ diff --git a/arch/powerpc/cpu/mpc8xx/video.c b/arch/powerpc/cpu/mpc8xx/video.c index 02cd0debc..fc351585b 100644 --- a/arch/powerpc/cpu/mpc8xx/video.c +++ b/arch/powerpc/cpu/mpc8xx/video.c @@ -109,7 +109,6 @@ DECLARE_GLOBAL_DATA_PTR; /************************************************************************/ #include <video_font.h> /* Get font data, width and height */ -#include <video_font_data.h> #ifdef CONFIG_VIDEO_LOGO #include <video_logo.h> /* Get logo data, width and height */ @@ -1177,7 +1176,7 @@ static void *video_logo (void) #ifndef CONFIG_FADS /* all normal boards */ /* leave one blank line */ - sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash", + sprintf(info, "MPC823 CPU at %s MHz, %ld MiB RAM, %ld MiB Flash", strmhz(temp, gd->cpu_clk), gd->ram_size >> 20, gd->bd->bi_flashsize >> 20 ); @@ -1188,7 +1187,7 @@ static void *video_logo (void) video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT, info); - sprintf (info, "2MB FLASH - 8MB DRAM - 4MB SRAM"); + sprintf(info, "2MiB FLASH - 8MiB DRAM - 4MiB SRAM"); video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2, info); #endif diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 7369582ef..c67be4ef2 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -79,6 +79,9 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(BSC9131, 9131, 1), CPU_TYPE_ENTRY(BSC9132, 9132, 2), CPU_TYPE_ENTRY(BSC9232, 9232, 2), + CPU_TYPE_ENTRY(C291, C291, 1), + CPU_TYPE_ENTRY(C292, C292, 1), + CPU_TYPE_ENTRY(C293, C293, 1), #elif defined(CONFIG_MPC86xx) CPU_TYPE_ENTRY(8610, 8610, 1), CPU_TYPE_ENTRY(8641, 8641, 2), diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index ff5812df5..242eb47ac 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -364,7 +364,7 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, ddr->timing_cfg_3 = (0 | ((ext_pretoact & 0x1) << 28) - | ((ext_acttopre & 0x2) << 24) + | ((ext_acttopre & 0x3) << 24) | ((ext_acttorw & 0x1) << 22) | ((ext_refrec & 0x1F) << 16) | ((ext_caslat & 0x3) << 12) @@ -681,6 +681,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, unsigned int odt_cfg = 0; /* ODT configuration */ unsigned int num_pr; /* Number of posted refreshes */ unsigned int slow = 0; /* DDR will be run less than 1250 */ + unsigned int x4_en = 0; /* x4 DRAM enable */ unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */ unsigned int ap_en; /* Address Parity Enable */ unsigned int d_init; /* DRAM data initialization */ @@ -725,6 +726,8 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, ap_en = 0; } + x4_en = popts->x4_en ? 1 : 0; + #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* Use the DDR controller to auto initialize memory. */ d_init = popts->ECC_init_using_memctl; @@ -747,6 +750,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, | ((odt_cfg & 0x3) << 21) | ((num_pr & 0xf) << 12) | ((slow & 1) << 11) + | (x4_en << 10) | (qd_en << 9) | (unq_mrs_en << 8) | ((obc_cfg & 0x1) << 6) @@ -1585,8 +1589,8 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, | ((ea & 0xFFF) << 0) /* ending address MSB */ ); } else { - debug("FSLDDR: setting bnds to 0 for inactive CS\n"); - ddr->cs[i].bnds = 0; + /* setting bnds to 0xffffffff for inactive CS */ + ddr->cs[i].bnds = 0xffffffff; } debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds); @@ -1638,5 +1642,10 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_sdram_rcw(ddr, popts, common_dimm); +#ifdef CONFIG_SYS_FSL_DDR_EMU + /* disble DDR training for emulator */ + ddr->debug[2] = 0x00000400; + ddr->debug[4] = 0xff800000; +#endif return check_fsl_memctl_config_regs(ddr); } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h index 4dd55fc4c..c173a5a74 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h @@ -96,7 +96,7 @@ unsigned int check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr); /* processor specific function */ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); + unsigned int ctrl_num, int step); /* board specific function */ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c index 3e7c269e4..b67158c0f 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c @@ -129,6 +129,7 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd, pdimm->ec_sdram_width = 0; pdimm->data_width = pdimm->primary_sdram_width + pdimm->ec_sdram_width; + pdimm->device_width = 1 << ((spd->organization & 0x7) + 2); /* These are the types defined by the JEDEC DDR3 SPD spec */ pdimm->mirrored_dimm = 0; diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c index 1ed6c7715..260fce577 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c @@ -205,6 +205,7 @@ static void fsl_ddr_dimm_parameters_edit(fsl_ddr_info_t *pinfo, DIMM_PARM(primary_sdram_width), DIMM_PARM(ec_sdram_width), DIMM_PARM(registered_dimm), + DIMM_PARM(device_width), DIMM_PARM(n_row_addr), DIMM_PARM(n_col_addr), @@ -263,6 +264,7 @@ static void print_dimm_parameters(const dimm_params_t *pdimm) DIMM_PARM(primary_sdram_width), DIMM_PARM(ec_sdram_width), DIMM_PARM(registered_dimm), + DIMM_PARM(device_width), DIMM_PARM(n_row_addr), DIMM_PARM(n_col_addr), @@ -443,6 +445,7 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS(twoT_en), CTRL_OPTIONS(threeT_en), CTRL_OPTIONS(ap_en), + CTRL_OPTIONS(x4_en), CTRL_OPTIONS(bstopre), CTRL_OPTIONS(wrlvl_override), CTRL_OPTIONS(wrlvl_sample), @@ -687,6 +690,7 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS(threeT_en), CTRL_OPTIONS(registered_dimm_en), CTRL_OPTIONS(ap_en), + CTRL_OPTIONS(x4_en), CTRL_OPTIONS(bstopre), CTRL_OPTIONS(wrlvl_override), CTRL_OPTIONS(wrlvl_sample), diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index e958e138d..56128a7b9 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -218,12 +218,16 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, if (dimm_params[i].n_ranks) { if (dimm_params[i].registered_dimm) { temp1 = 1; +#ifndef CONFIG_SPL_BUILD printf("Detected RDIMM %s\n", dimm_params[i].mpart); +#endif } else { temp2 = 1; +#ifndef CONFIG_SPL_BUILD printf("Detected UDIMM %s\n", dimm_params[i].mpart); +#endif } } } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index 7a8636de1..842bf1989 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -25,10 +25,6 @@ void fsl_ddr_set_lawbar( unsigned int ctrl_num); void fsl_ddr_set_intl3r(const unsigned int granule_size); -/* processor specific function */ -extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); - #if defined(SPD_EEPROM_ADDRESS) || \ defined(SPD_EEPROM_ADDRESS1) || defined(SPD_EEPROM_ADDRESS2) || \ defined(SPD_EEPROM_ADDRESS3) || defined(SPD_EEPROM_ADDRESS4) @@ -365,9 +361,11 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, { unsigned int i, j; unsigned long long total_mem = 0; + int assert_reset; fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg; common_timing_params_t *timing_params = pinfo->common_timing_params; + assert_reset = board_need_mem_reset(); /* data bus width capacity adjust shift amount */ unsigned int dbw_capacity_adjust[CONFIG_NUM_DDR_CONTROLLERS]; @@ -462,7 +460,20 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, timing_params[i].all_DIMMs_registered, &pinfo->memctl_opts[i], pinfo->dimm_params[i], i); + /* + * For RDIMMs, JEDEC spec requires clocks to be stable + * before reset signal is deasserted. For the boards + * using fixed parameters, this function should be + * be called from board init file. + */ + if (timing_params[i].all_DIMMs_registered) + assert_reset = 1; } + if (assert_reset) { + debug("Asserting mem reset\n"); + board_assert_mem_reset(); + } + case STEP_ASSIGN_ADDRESSES: /* STEP 5: Assign addresses to chip selects */ check_interleaving_options(pinfo); @@ -504,7 +515,13 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, fsl_ddr_cfg_regs_t *reg = &ddr_reg[i]; if (reg->cs[j].config & 0x80000000) { unsigned int end; - end = reg->cs[j].bnds & 0xFFF; + /* + * 0xfffffff is a special value we put + * for unused bnds + */ + if (reg->cs[j].bnds == 0xffffffff) + continue; + end = reg->cs[j].bnds & 0xffff; if (end > max_end) { max_end = end; } @@ -531,6 +548,7 @@ phys_size_t fsl_ddr_sdram(void) unsigned int law_memctl = LAW_TRGT_IF_DDR_1; unsigned long long total_memory; fsl_ddr_info_t info; + int deassert_reset; /* Reset info structure. */ memset(&info, 0, sizeof(fsl_ddr_info_t)); @@ -559,7 +577,21 @@ phys_size_t fsl_ddr_sdram(void) } } - /* Program configuration registers. */ + /* + * Program configuration registers. + * JEDEC specs requires clocks to be stable before deasserting reset + * for RDIMMs. Clocks start after chip select is enabled and clock + * control register is set. During step 1, all controllers have their + * registers set but not enabled. Step 2 proceeds after deasserting + * reset through board FPGA or GPIO. + * For non-registered DIMMs, initialization can go through but it is + * also OK to follow the same flow. + */ + deassert_reset = board_need_mem_reset(); + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + if (info.common_timing_params[i].all_DIMMs_registered) + deassert_reset = 1; + } for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { debug("Programming controller %u\n", i); if (info.common_timing_params[i].ndimms_present == 0) { @@ -567,8 +599,22 @@ phys_size_t fsl_ddr_sdram(void) "skipping programming\n", i); continue; } - - fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i); + /* + * The following call with step = 1 returns before enabling + * the controller. It has to finish with step = 2 later. + */ + fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i, + deassert_reset ? 1 : 0); + } + if (deassert_reset) { + /* Use board FPGA or GPIO to deassert reset signal */ + debug("Deasserting mem reset\n"); + board_deassert_mem_reset(); + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + /* Call with step = 2 to continue initialization */ + fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), + i, 2); + } } /* program LAWs */ @@ -637,7 +683,8 @@ phys_size_t fsl_ddr_sdram(void) #if !defined(CONFIG_PHYS_64BIT) /* Check for 4G or more. Bad. */ if (total_memory >= (1ull << 32)) { - printf("Detected %lld MB of memory\n", total_memory >> 20); + puts("Detected "); + print_size(total_memory, " of memory\n"); printf(" This U-Boot only supports < 4G of DDR\n"); printf(" You could rebuild it with CONFIG_PHYS_64BIT\n"); printf(" "); /* re-align to match init_func_ram print */ diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 26369e099..30cdca497 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -700,6 +700,8 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, } #endif + popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0; + /* Choose burst length. */ #if defined(CONFIG_FSL_DDR3) #if defined(CONFIG_E500MC) diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 89966e0d2..eb7cbbce7 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -121,11 +121,8 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) { const char *modes[] = { "host", "peripheral", "otg" }; const char *phys[] = { "ulpi", "utmi" }; - const char *mode = NULL; - const char *phy_type = NULL; const char *dr_mode_type = NULL; const char *dr_phy_type = NULL; - char usb1_defined = 0; int usb_mode_off = -1; int usb_phy_off = -1; char str[5]; @@ -159,12 +156,6 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) dr_mode_type = modes[mode_idx]; dr_phy_type = phys[phy_idx]; - /* use usb_dr_mode and usb_phy_type if - usb1_defined = 0; these variables are to - be deprecated */ - if (!strcmp(str, "usb1")) - usb1_defined = 1; - if (mode_idx < 0 && phy_idx < 0) { printf("WARNING: invalid phy or mode\n"); return; @@ -183,19 +174,6 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) if (usb_phy_off < 0) return; } - - if (!usb1_defined) { - int usb_off = -1; - mode = getenv("usb_dr_mode"); - phy_type = getenv("usb_phy_type"); - if (mode || phy_type) { - printf("WARNING: usb_dr_mode and usb_phy_type " - "are to be deprecated soon. Use " - "hwconfig to set these values instead!!\n"); - fdt_fixup_usb_mode_phy_type(blob, mode, - phy_type, usb_off); - } - } } #endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */ diff --git a/arch/powerpc/cpu/mpc8xxx/law.c b/arch/powerpc/cpu/mpc8xxx/law.c index 89a561e0a..a40108310 100644 --- a/arch/powerpc/cpu/mpc8xxx/law.c +++ b/arch/powerpc/cpu/mpc8xxx/law.c @@ -76,7 +76,8 @@ void disable_law(u8 idx) return; } -#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_NAND_SPL) && \ + (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL)) static int get_law_entry(u8 i, struct law_entry *e) { u32 lawar; @@ -106,7 +107,8 @@ int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) return idx; } -#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_NAND_SPL) && \ + (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL)) int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) { u32 idx; diff --git a/arch/powerpc/cpu/ppc4xx/4xx_pci.c b/arch/powerpc/cpu/ppc4xx/4xx_pci.c index 2ca355b13..5584e0f3e 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_pci.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_pci.c @@ -1,26 +1,5 @@ -/*-----------------------------------------------------------------------------+ - * This source code is dual-licensed. You may use it under the terms of - * the GNU General Public license version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *-----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------+ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs * * File Name: 405gp_pci.c * diff --git a/arch/powerpc/cpu/ppc4xx/4xx_uart.c b/arch/powerpc/cpu/ppc4xx/4xx_uart.c index 1ad19abff..50c28a0d3 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_uart.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_uart.c @@ -5,30 +5,7 @@ * (C) Copyright 2010 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M + * SPDX-License-Identifier: GPL-2.0 ibm-pibs */ #include <common.h> @@ -40,7 +17,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_440) @@ -91,7 +68,7 @@ DECLARE_GLOBAL_DATA_PTR; #define UDIV_SUBTRACT 0 #define UART0_SDR SDR0_UART0 #define UART1_SDR SDR0_UART1 -#else /* CONFIG_405GP || CONFIG_405CR */ +#else /* CONFIG_405GP */ #define CR0_MASK 0x00001fff #define CR0_EXTCLK_ENA 0x000000c0 #define CR0_UDIV_POS 1 @@ -196,7 +173,7 @@ int get_serial_clock(void) * Let's handle this in some #ifdef's for the SoC's. */ -#if defined(CONFIG_405CR) || defined(CONFIG_405GP) +#if defined(CONFIG_405GP) reg = mfdcr(CPC0_CR0) & ~CR0_MASK; #ifdef CONFIG_SYS_EXT_SERIAL_CLOCK clk = CONFIG_SYS_EXT_SERIAL_CLOCK; @@ -223,7 +200,7 @@ int get_serial_clock(void) #else clk = CONFIG_SYS_BASE_BAUD * 16; #endif -#endif /* CONFIG_405CR */ +#endif #if defined(CONFIG_405EP) { @@ -288,4 +265,4 @@ int get_serial_clock(void) return clk; } -#endif /* CONFIG_405GP || CONFIG_405CR */ +#endif /* CONFIG_405GP */ diff --git a/arch/powerpc/cpu/ppc4xx/cpu.c b/arch/powerpc/cpu/ppc4xx/cpu.c index fe050985e..d1fc7f3fc 100644 --- a/arch/powerpc/cpu/ppc4xx/cpu.c +++ b/arch/powerpc/cpu/ppc4xx/cpu.c @@ -320,25 +320,9 @@ int checkcpu (void) puts("405GP Rev. D"); break; -#ifdef CONFIG_405GP - case PVR_405GP_RE: /* 405GP rev E and 405CR rev C have same PVR */ + case PVR_405GP_RE: puts("405GP Rev. E"); break; -#endif - - case PVR_405CR_RA: - puts("405CR Rev. A"); - break; - - case PVR_405CR_RB: - puts("405CR Rev. B"); - break; - -#ifdef CONFIG_405CR - case PVR_405CR_RC: /* 405GP rev E and 405CR rev C have same PVR */ - puts("405CR Rev. C"); - break; -#endif case PVR_405GPR_RB: puts("405GPr Rev. B"); @@ -647,12 +631,12 @@ int checkcpu (void) #endif #if defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) - printf (" 16 kB I-Cache 16 kB D-Cache"); + printf(" 16 KiB I-Cache 16 KiB D-Cache"); #elif defined(CONFIG_440) - printf (" 32 kB I-Cache 32 kB D-Cache"); + printf(" 32 KiB I-Cache 32 KiB D-Cache"); #else - printf (" 16 kB I-Cache %d kB D-Cache", - ((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8); + printf(" 16 KiB I-Cache %d KiB D-Cache", + ((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8); #endif #endif /* !defined(CONFIG_405) */ diff --git a/arch/powerpc/cpu/ppc4xx/cpu_init.c b/arch/powerpc/cpu/ppc4xx/cpu_init.c index d53d88251..d465dcda8 100644 --- a/arch/powerpc/cpu/ppc4xx/cpu_init.c +++ b/arch/powerpc/cpu/ppc4xx/cpu_init.c @@ -326,7 +326,7 @@ cpu_init_f (void) * External Bus Controller (EBC) Setup */ #if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR)) -#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ +#if (defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_405)) /* diff --git a/arch/powerpc/cpu/ppc4xx/miiphy.c b/arch/powerpc/cpu/ppc4xx/miiphy.c index 297155fda..e4a9db676 100644 --- a/arch/powerpc/cpu/ppc4xx/miiphy.c +++ b/arch/powerpc/cpu/ppc4xx/miiphy.c @@ -1,25 +1,6 @@ -/*-----------------------------------------------------------------------------+ - | This source code is dual-licensed. You may use it under the terms of the - | GNU General Public License version 2, or under the license below. - | - | This source code has been made available to you by IBM on an AS-IS - | basis. Anyone receiving this source is licensed under IBM - | copyrights to use it in any way he or she deems fit, including - | copying it, modifying it, compiling it, and redistributing it either - | with or without modifications. No license under IBM patents or - | patent applications is to be implied by the copyright license. - | - | Any user of this software should understand that IBM cannot provide - | technical support for this software and will not be responsible for - | any consequences resulting from the use of this software. - | - | Any person who transfers this source code or any derivative work - | must include the IBM copyright notice, this paragraph, and the - | preceding two paragraphs in the transferred software. - | - | COPYRIGHT I B M CORPORATION 1995 - | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - +-----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*-----------------------------------------------------------------------------+ | | File Name: miiphy.c diff --git a/arch/powerpc/cpu/ppc4xx/speed.c b/arch/powerpc/cpu/ppc4xx/speed.c index 3345e7334..7e077d5a9 100644 --- a/arch/powerpc/cpu/ppc4xx/speed.c +++ b/arch/powerpc/cpu/ppc4xx/speed.c @@ -21,7 +21,7 @@ DECLARE_GLOBAL_DATA_PTR; #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) +#if defined(CONFIG_405GP) void get_sys_info (PPC4xx_SYS_INFO * sysInfo) { @@ -1184,7 +1184,7 @@ ulong get_bus_freq (ulong dummy) { ulong val; -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_405) || \ defined(CONFIG_440) diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index 57ae1d382..d9d8cbffa 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -6,46 +6,7 @@ * Copyright (c) 2008 Nuovation System Designs, LLC * Grant Erickson <gerickson@nuovations.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -/*------------------------------------------------------------------------------+ - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *------------------------------------------------------------------------------- + * SPDX-License-Identifier: GPL-2.0 ibm-pibs */ /* @@ -833,7 +794,7 @@ _start: #endif /* CONFIG_440 */ /*****************************************************************************/ -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_405) /*----------------------------------------------------------------------- */ @@ -1103,7 +1064,7 @@ _start: #endif /* CONFIG_NAND_SPL */ -#endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */ +#endif /* CONFIG_405GP || CONFIG_405 || CONFIG_405EP */ /*----------------------------------------------------------------------- */ diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 7ed93acdc..15e44de41 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -67,6 +67,8 @@ #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #define CONFIG_SYS_FSL_RMU #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x00 #elif defined(CONFIG_MPC8555) #define CONFIG_MAX_CPUS 1 @@ -131,7 +133,10 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769 #define CONFIG_SYS_FSL_ERRATUM_P1010_A003549 +#define CONFIG_SYS_FSL_ERRATUM_SEC_A003571 #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x10 /* P1011 is single core version of P1020 */ #elif defined(CONFIG_P1011) @@ -249,6 +254,8 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x10000 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x11 /* P1024 is lower end variant of P1020 */ #elif defined(CONFIG_P1024) @@ -303,6 +310,7 @@ #elif defined(CONFIG_PPC_P2041) /* also supports P2040 */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -333,9 +341,12 @@ #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #define CONFIG_SYS_FSL_ERRATUM_A004849 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x11 #elif defined(CONFIG_PPC_P3041) #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -366,9 +377,13 @@ #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #define CONFIG_SYS_FSL_ERRATUM_A004849 +#define CONFIG_SYS_FSL_ERRATUM_A005812 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x20 #elif defined(CONFIG_PPC_P4080) /* also supports P4040 */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 8 #define CONFIG_SYS_FSL_NUM_CC_PLLS 4 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -410,10 +425,14 @@ #define CONFIG_SYS_FSL_ERRATUM_A004849 #define CONFIG_SYS_FSL_ERRATUM_A004580 #define CONFIG_SYS_P4080_ERRATUM_PCIE_A003 +#define CONFIG_SYS_FSL_ERRATUM_A005812 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x20 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */ #define CONFIG_SYS_PPC64 /* 64-bit core */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -440,10 +459,13 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xc0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x20 #elif defined(CONFIG_PPC_P5040) #define CONFIG_SYS_PPC64 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 3 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -469,6 +491,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 +#define CONFIG_SYS_FSL_ERRATUM_A005812 #elif defined(CONFIG_BSC9131) #define CONFIG_MAX_CPUS 1 @@ -492,12 +515,18 @@ #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_FSL_DSP_DDR_ADDR 0x40000000 +#define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 0xb0000000 +#define CONFIG_SYS_FSL_DSP_M3_RAM_ADDR 0xc0000000 +#define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 3 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_NAND_FSL_IFC #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x11 #elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) #define CONFIG_E6500 @@ -523,6 +552,8 @@ #endif #define CONFIG_SYS_FSL_NUM_CC_PLLS 5 #define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SRDS_1 +#define CONFIG_SYS_FSL_SRDS_2 #define CONFIG_SYS_FSL_SRDS_3 #define CONFIG_SYS_FSL_SRDS_4 #define CONFIG_SYS_FSL_SEC_COMPAT 4 @@ -536,6 +567,7 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_SRIO_LIODN #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_A004468 @@ -552,6 +584,8 @@ #define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ #define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ #define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SRDS_1 +#define CONFIG_SYS_FSL_SRDS_2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 @@ -576,6 +610,7 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_SRIO_LIODN #else #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 2 @@ -612,6 +647,18 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#elif defined(CONFIG_PPC_C29X) +#define CONFIG_MAX_CPUS 1 +#define CONFIG_FSL_SDHC_V2_3 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3 +#define CONFIG_TSECV2_1 +#define CONFIG_SYS_FSL_SEC_COMPAT 6 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 + #else #error Processor type not defined for this platform #endif diff --git a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h index ffe4db8b8..bd312ad5c 100644 --- a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h +++ b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h @@ -26,6 +26,7 @@ typedef struct dimm_params_s { unsigned int primary_sdram_width; unsigned int ec_sdram_width; unsigned int registered_dimm; + unsigned int device_width; /* x4, x8, x16 components */ /* SDRAM device parameters */ unsigned int n_row_addr; diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index 640d3297d..f4eec82d5 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -277,6 +277,7 @@ typedef struct memctl_options_s { unsigned int mirrored_dimm; unsigned int quad_rank_present; unsigned int ap_en; /* address parity enable for RDIMM */ + unsigned int x4_en; /* enable x4 devices */ /* Global Timing Parameters */ unsigned int cas_latency_override; @@ -330,9 +331,31 @@ extern phys_size_t fsl_ddr_sdram(void); extern phys_size_t fsl_ddr_sdram_size(void); extern int fsl_use_spd(void); extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); + unsigned int ctrl_num, int step); u32 fsl_ddr_get_intl3r(void); +static void __board_assert_mem_reset(void) +{ +} + +static void __board_deassert_mem_reset(void) +{ +} + +void board_assert_mem_reset(void) + __attribute__((weak, alias("__board_assert_mem_reset"))); + +void board_deassert_mem_reset(void) + __attribute__((weak, alias("__board_deassert_mem_reset"))); + +static int __board_need_mem_reset(void) +{ + return 0; +} + +int board_need_mem_reset(void) + __attribute__((weak, alias("__board_need_mem_reset"))); + /* * The 85xx boards have a common prototype for fixed_sdram so put the * declaration here. diff --git a/arch/powerpc/include/asm/fsl_i2c.h b/arch/powerpc/include/asm/fsl_i2c.h index 4f7134132..d6537fd63 100644 --- a/arch/powerpc/include/asm/fsl_i2c.h +++ b/arch/powerpc/include/asm/fsl_i2c.h @@ -54,6 +54,7 @@ typedef struct fsl_i2c { #define I2C_CR_MTX 0x10 #define I2C_CR_TXAK 0x08 #define I2C_CR_RSTA 0x04 +#define I2C_CR_BIT6 0x02 /* required for workaround A004447 */ #define I2C_CR_BCST 0x01 u8 sr; /* I2C status register */ diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h index bea163676..37d3a2246 100644 --- a/arch/powerpc/include/asm/fsl_law.h +++ b/arch/powerpc/include/asm/fsl_law.h @@ -82,7 +82,7 @@ enum law_trgt_if { #ifndef CONFIG_MPC8641 LAW_TRGT_IF_PCIE_1 = 0x02, #endif -#if defined(CONFIG_BSC9131) +#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) LAW_TRGT_IF_OCN_DSP = 0x03, #else #if !defined(CONFIG_MPC8572) && !defined(CONFIG_P2020) @@ -92,9 +92,14 @@ enum law_trgt_if { LAW_TRGT_IF_LBC = 0x04, LAW_TRGT_IF_CCSR = 0x08, LAW_TRGT_IF_DSP_CCSR = 0x09, + LAW_TRGT_IF_PLATFORM_SRAM = 0x0a, LAW_TRGT_IF_DDR_INTRLV = 0x0b, LAW_TRGT_IF_RIO = 0x0c, +#if defined(CONFIG_BSC9132) + LAW_TRGT_IF_CLASS_DSP = 0x0d, +#else LAW_TRGT_IF_RIO_2 = 0x0d, +#endif LAW_TRGT_IF_DPAA_SWP_SRAM = 0x0e, LAW_TRGT_IF_DDR = 0x0f, LAW_TRGT_IF_DDR_2 = 0x16, /* 2nd controller */ diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index 3f543d924..44bc88dce 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -29,6 +29,13 @@ struct srio_liodn_id_table { + CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \ } +#define SET_SRIO_LIODN_BASE(port, id_a) \ + { .id = { id_a }, .num_ids = 1, .portid = port, \ + .reg_offset[0] = offsetof(struct ccsr_rio, liodn) \ + + (port - 1) * 0x200 \ + + CONFIG_SYS_FSL_SRIO_ADDR, \ + } + struct liodn_id_table { const char * compat; u32 id[2]; diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h index c740da37c..749411c10 100644 --- a/arch/powerpc/include/asm/fsl_pci.h +++ b/arch/powerpc/include/asm/fsl_pci.h @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009-2011 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2012 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -13,6 +13,34 @@ #define PEX_IP_BLK_REV_2_2 0x02080202 #define PEX_IP_BLK_REV_2_3 0x02080203 +#define PEX_IP_BLK_REV_3_0 0x02080300 + +/* Freescale-specific PCI config registers */ +#define FSL_PCI_PBFR 0x44 + +#ifdef CONFIG_SYS_FSL_PCI_VER_3_X +/* Currently only the PCIe capability is used, so hardcode the offset. + * if more capabilities need to be justified, the capability link method + * should be applied here + */ +#define FSL_PCIE_CAP_ID 0x70 +#define PCI_DCR 0x78 /* PCIe Device Control Register */ +#define PCI_DSR 0x7a /* PCIe Device Status Register */ +#define PCI_LSR 0x82 /* PCIe Link Status Register */ +#define PCI_LCR 0x80 /* PCIe Link Control Register */ +#else +#define FSL_PCIE_CAP_ID 0x4c +#define PCI_DCR 0x54 /* PCIe Device Control Register */ +#define PCI_DSR 0x56 /* PCIe Device Status Register */ +#define PCI_LSR 0x5e /* PCIe Link Status Register */ +#define PCI_LCR 0x5c /* PCIe Link Control Register */ +#endif + +#define FSL_PCIE_CFG_RDY 0x4b0 +#define FSL_PROG_IF_AGENT 0x1 + +#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */ +#define PCI_LTSSM_L0 0x16 /* L0 state */ int fsl_setup_hose(struct pci_controller *hose, unsigned long addr); int fsl_is_pci_agent(struct pci_controller *hose); @@ -149,7 +177,10 @@ typedef struct ccsr_pci { u32 perr_cap3; /* 0xe34 - PCIE Error Capture Register 3 */ char res23[200]; u32 pdb_stat; /* 0xf00 - PCIE Debug Status */ - char res24[252]; + char res24[16]; + u32 pex_csr0; /* 0xf14 - PEX Control/Status register 0*/ + u32 pex_csr1; /* 0xf18 - PEX Control/Status register 1*/ + char res25[228]; } ccsr_fsl_pci_t; #define PCIE_CONFIG_PC 0x00020000 #define PCIE_CONFIG_OB_CK 0x00002000 diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index 59189adb3..1106d2805 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -90,6 +90,7 @@ void fsl_serdes_init(void); #ifdef CONFIG_FSL_CORENET #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 int serdes_get_first_lane(u32 sd, enum srds_prtcl device); +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); #else int serdes_get_first_lane(enum srds_prtcl device); #endif diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 81b3322fe..3a10d778f 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1544,6 +1544,18 @@ struct rio_pw { }; #endif +#ifdef CONFIG_SYS_FSL_SRIO_LIODN +struct rio_liodn { + u32 plbr; + u8 res0[28]; + u32 plaor; + u8 res1[12]; + u32 pludr; + u32 plldr; + u8 res2[456]; +}; +#endif + /* RapidIO Registers */ struct ccsr_rio { struct rio_arch arch; @@ -1566,6 +1578,10 @@ struct ccsr_rio { u8 res7[100]; struct rio_pw pw; #endif +#ifdef CONFIG_SYS_FSL_SRIO_LIODN + u8 res5[8192]; + struct rio_liodn liodn[CONFIG_SYS_FSL_SRIO_MAX_PORTS]; +#endif }; #endif @@ -2131,6 +2147,11 @@ typedef struct ccsr_gur { #ifdef CONFIG_MPC8536 #define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25 +#elif defined(CONFIG_PPC_C29X) +#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 +#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT (9 - ((gur->pordevsr2 \ + & MPC85xx_PORDEVSR2_DDR_SPD_0) \ + >> MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT)) #else #if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) #define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 @@ -2178,6 +2199,9 @@ typedef struct ccsr_gur { #elif defined(CONFIG_BSC9132) #define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17 +#elif defined(CONFIG_PPC_C29X) +#define MPC85xx_PORDEVSR_IO_SEL 0x00e00000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 #else #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19 @@ -2193,6 +2217,10 @@ typedef struct ccsr_gur { #define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007 u32 pordbgmsr; /* POR debug mode status */ u32 pordevsr2; /* POR I/O device status 2 */ +#if defined(CONFIG_PPC_C29X) +#define MPC85xx_PORDEVSR2_DDR_SPD_0 0x00000008 +#define MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT 3 +#endif /* The 8544 RM says this is bit 26, but it's really bit 24 */ #define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080 u8 res1[8]; @@ -2339,6 +2367,11 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000 #define MPC85xx_PMUXCR0_SIM_SEL 0x00014000 #endif +#if defined(CONFIG_PPC_C29X) +#define MPC85xx_PMUXCR_SPI_MASK 0x00000300 +#define MPC85xx_PMUXCR_SPI 0x00000000 +#define MPC85xx_PMUXCR_SPI_GPIO 0x00000100 +#endif u32 pmuxcr2; /* Alt. function signal multiplex control 2 */ #if defined(CONFIG_P1010) || defined(CONFIG_P1014) #define MPC85xx_PMUXCR2_UART_GPIO 0x40000000 @@ -2526,7 +2559,9 @@ typedef struct serdes_corenet { #define SRDS_RSTCTL_RSTDONE 0x40000000 #define SRDS_RSTCTL_RSTERR 0x20000000 #define SRDS_RSTCTL_SWRST 0x10000000 -#define SRDS_RSTCTL_SDPD 0x00000020 +#define SRDS_RSTCTL_SDEN 0x00000020 +#define SRDS_RSTCTL_SDRST_B 0x00000040 +#define SRDS_RSTCTL_PLLRST_B 0x00000080 u32 pllcr0; /* PLL Control Register 0 */ #define SRDS_PLLCR0_POFF 0x80000000 #define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000 @@ -2811,54 +2846,6 @@ typedef struct ccsr_pme { u8 res4[0x400]; } ccsr_pme_t; -#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE -struct ccsr_usb_port_ctrl { - u32 ctrl; - u32 drvvbuscfg; - u32 pwrfltcfg; - u32 sts; - u8 res_14[0xc]; - u32 bistcfg; - u32 biststs; - u32 abistcfg; - u32 abiststs; - u8 res_30[0x10]; - u32 xcvrprg; - u32 anaprg; - u32 anadrv; - u32 anasts; -}; - -typedef struct ccsr_usb_phy { - u32 id; - struct ccsr_usb_port_ctrl port1; - u8 res_50[0xc]; - u32 tvr; - u32 pllprg[4]; - u8 res_70[0x4]; - u32 anaccfg; - u32 dbg; - u8 res_7c[0x4]; - struct ccsr_usb_port_ctrl port2; - u8 res_dc[0x334]; -} ccsr_usb_phy_t; - -#define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0) -#define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21) -#else -typedef struct ccsr_usb_phy { - u8 res0[0x18]; - u32 usb_enable_override; - u8 res[0xe4]; -} ccsr_usb_phy_t; -#define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1 -#endif - #ifdef CONFIG_SYS_FSL_RAID_ENGINE struct ccsr_raide { u8 res0[0x543]; @@ -3008,12 +2995,18 @@ struct ccsr_pman { #define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x23000 #ifdef CONFIG_TSECV2 #define CONFIG_SYS_TSEC1_OFFSET 0xB0000 +#elif defined(CONFIG_TSECV2_1) +#define CONFIG_SYS_TSEC1_OFFSET 0x10000 #else #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #endif #define CONFIG_SYS_MDIO1_OFFSET 0x24000 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000 +#if defined(CONFIG_PPC_C29X) +#define CONFIG_SYS_FSL_SEC_OFFSET 0x80000 +#else #define CONFIG_SYS_FSL_SEC_OFFSET 0x30000 +#endif #define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100 #define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000 #define CONFIG_SYS_SNVS_OFFSET 0xE6000 @@ -3031,6 +3024,12 @@ struct ccsr_pman { #define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000 #define CONFIG_SYS_FSL_SRIO_OFFSET 0xC0000 +#if defined(CONFIG_BSC9132) +#define CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET 0x10000 +#define CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR \ + (CONFIG_SYS_FSL_DSP_CCSRBAR + CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET) +#endif + #define CONFIG_SYS_FSL_CPC_ADDR \ (CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET) #define CONFIG_SYS_FSL_QMAN_ADDR \ diff --git a/arch/powerpc/include/asm/ppc405.h b/arch/powerpc/include/asm/ppc405.h index 892848aac..8bb342b92 100644 --- a/arch/powerpc/include/asm/ppc405.h +++ b/arch/powerpc/include/asm/ppc405.h @@ -1,25 +1,6 @@ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of the -| GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ #ifndef __PPC405_H__ #define __PPC405_H__ diff --git a/arch/powerpc/include/asm/ppc405cr.h b/arch/powerpc/include/asm/ppc405cr.h deleted file mode 100644 index 0ea69bd09..000000000 --- a/arch/powerpc/include/asm/ppc405cr.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * (C) Copyright 2010 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _PPC405CR_H_ -#define _PPC405CR_H_ - -#define CONFIG_SDRAM_PPC4xx_IBM_SDRAM /* IBM SDRAM controller */ - -/* Memory mapped register */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* Internal Peripherals */ - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0400) - -#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0700) - -/* DCR's */ -#define DCP0_CFGADDR 0x0014 /* Decompression controller addr reg */ -#define DCP0_CFGDATA 0x0015 /* Decompression controller data reg */ -#define OCM0_ISCNTL 0x0019 /* OCM I-side control reg */ -#define OCM0_DSARC 0x001a /* OCM D-side address compare */ -#define OCM0_DSCNTL 0x001b /* OCM D-side control */ -#define CPC0_PLLMR 0x00b0 /* PLL mode register */ -#define CPC0_CR0 0x00b1 /* chip control register 0 */ -#define CPC0_CR1 0x00b2 /* chip control register 1 */ -#define CPC0_PSR 0x00b4 /* chip pin strapping reg */ -#define CPC0_EIRR 0x00b6 /* ext interrupt routing reg */ -#define CPC0_SR 0x00b8 /* Power management status */ -#define CPC0_ER 0x00b9 /* Power management enable */ -#define CPC0_FR 0x00ba /* Power management force */ -#define CPC0_ECR 0x00aa /* edge conditioner register */ - -#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */ -#define PLLMR_FWD_DIV_BYPASS 0xE0000000 -#define PLLMR_FWD_DIV_3 0xA0000000 -#define PLLMR_FWD_DIV_4 0x80000000 -#define PLLMR_FWD_DIV_6 0x40000000 - -#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */ -#define PLLMR_FB_DIV_1 0x02000000 -#define PLLMR_FB_DIV_2 0x04000000 -#define PLLMR_FB_DIV_3 0x06000000 -#define PLLMR_FB_DIV_4 0x08000000 - -#define PLLMR_TUNING_MASK 0x01F80000 - -#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */ -#define PLLMR_CPU_PLB_DIV_1 0x00000000 -#define PLLMR_CPU_PLB_DIV_2 0x00020000 -#define PLLMR_CPU_PLB_DIV_3 0x00040000 -#define PLLMR_CPU_PLB_DIV_4 0x00060000 - -#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */ -#define PLLMR_OPB_PLB_DIV_1 0x00000000 -#define PLLMR_OPB_PLB_DIV_2 0x00008000 -#define PLLMR_OPB_PLB_DIV_3 0x00010000 -#define PLLMR_OPB_PLB_DIV_4 0x00018000 - -#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */ -#define PLLMR_PCI_PLB_DIV_1 0x00000000 -#define PLLMR_PCI_PLB_DIV_2 0x00002000 -#define PLLMR_PCI_PLB_DIV_3 0x00004000 -#define PLLMR_PCI_PLB_DIV_4 0x00006000 - -#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */ -#define PLLMR_EXB_PLB_DIV_2 0x00000000 -#define PLLMR_EXB_PLB_DIV_3 0x00000800 -#define PLLMR_EXB_PLB_DIV_4 0x00001000 -#define PLLMR_EXB_PLB_DIV_5 0x00001800 - -/* definitions for PPC405GPr (new mode strapping) */ -#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */ - -#define PSR_PLL_FWD_MASK 0xC0000000 -#define PSR_PLL_FDBACK_MASK 0x30000000 -#define PSR_PLL_TUNING_MASK 0x0E000000 -#define PSR_PLB_CPU_MASK 0x01800000 -#define PSR_OPB_PLB_MASK 0x00600000 -#define PSR_PCI_PLB_MASK 0x00180000 -#define PSR_EB_PLB_MASK 0x00060000 -#define PSR_ROM_WIDTH_MASK 0x00018000 -#define PSR_ROM_LOC 0x00004000 -#define PSR_PCI_ASYNC_EN 0x00001000 -#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */ -#define PSR_PCI_ARBIT_EN 0x00000400 -#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */ - -#endif /* _PPC405CR_H_ */ diff --git a/arch/powerpc/include/asm/ppc440.h b/arch/powerpc/include/asm/ppc440.h index 411d441a2..0f5bc8d1c 100644 --- a/arch/powerpc/include/asm/ppc440.h +++ b/arch/powerpc/include/asm/ppc440.h @@ -1,26 +1,3 @@ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of the -| GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ - /* * (C) Copyright 2006 * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com @@ -32,7 +9,7 @@ * (C) Copyright 2010 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0 ibm-pibs */ #ifndef __PPC440_H__ diff --git a/arch/powerpc/include/asm/ppc4xx-ebc.h b/arch/powerpc/include/asm/ppc4xx-ebc.h index 9eb50ee84..32062fd41 100644 --- a/arch/powerpc/include/asm/ppc4xx-ebc.h +++ b/arch/powerpc/include/asm/ppc4xx-ebc.h @@ -14,12 +14,12 @@ * Within this group there is a slight variation concerning the bit field * position of the EMPL and EMPH fields: */ -#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || \ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define CONFIG_EBC_PPC4xx_IBM_VER1 -#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) #define EBC_CFG_EMPH_POS 8 #define EBC_CFG_EMPL_POS 6 @@ -32,7 +32,7 @@ /* * Define the max number of EBC banks (chip selects) */ -#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EZ) || \ defined(CONFIG_440GP) || defined(CONFIG_440GX) #define EBC_NUM_BANKS 8 diff --git a/arch/powerpc/include/asm/ppc4xx-emac.h b/arch/powerpc/include/asm/ppc4xx-emac.h index a219fa97f..e6eb33222 100644 --- a/arch/powerpc/include/asm/ppc4xx-emac.h +++ b/arch/powerpc/include/asm/ppc4xx-emac.h @@ -1,25 +1,6 @@ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of the -| GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*----------------------------------------------------------------------------+ | | File Name: enetemac.h diff --git a/arch/powerpc/include/asm/ppc4xx-mal.h b/arch/powerpc/include/asm/ppc4xx-mal.h index 71986856b..d15290dc1 100644 --- a/arch/powerpc/include/asm/ppc4xx-mal.h +++ b/arch/powerpc/include/asm/ppc4xx-mal.h @@ -1,26 +1,7 @@ /* include/mal.h, openbios_walnut, walnut_bios 8/6/99 08:48:40 */ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of the -| GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*----------------------------------------------------------------------------+ | | File Name: mal.h diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h index 9f2a08b8b..8d703c663 100644 --- a/arch/powerpc/include/asm/ppc4xx.h +++ b/arch/powerpc/include/asm/ppc4xx.h @@ -1,25 +1,6 @@ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of -| the GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ #ifndef __PPC4XX_H__ #define __PPC4XX_H__ @@ -27,10 +8,6 @@ /* * Include SoC specific headers */ -#if defined(CONFIG_405CR) -#include <asm/ppc405cr.h> -#endif - #if defined(CONFIG_405EP) #include <asm/ppc405ep.h> #endif diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 56b22d840..c0fb51993 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -847,7 +847,7 @@ /* System-On-Chip Version Register (SVR) field extraction */ #define SVR_VER(svr) (((svr) >> 16) & 0xFFFF) /* Version field */ -#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revision field */ +#define SVR_REV(svr) (((svr) >> 0) & 0xFF) /* Revision field */ #define SVR_CID(svr) (((svr) >> 28) & 0x0F) /* Company or manufacturer ID */ #define SVR_SOCOP(svr) (((svr) >> 22) & 0x3F) /* SOC integration options */ @@ -894,9 +894,6 @@ #define PVR_405GP_RC 0x40110082 #define PVR_405GP_RD 0x401100C4 #define PVR_405GP_RE 0x40110145 /* same as pc405cr rev c */ -#define PVR_405CR_RA 0x40110041 -#define PVR_405CR_RB 0x401100C5 -#define PVR_405CR_RC 0x40110145 /* same as pc405gp rev e */ #define PVR_405EP_RA 0x51210950 #define PVR_405GPR_RB 0x50910951 #define PVR_405EZ_RA 0x41511460 @@ -1043,9 +1040,6 @@ /* System Version Register (SVR) field extraction */ -#define SVR_VER(svr) (((svr) >> 16) & 0xFFFF) /* Version field */ -#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revison field */ - #define SVR_SUBVER(svr) (((svr) >> 8) & 0xFF) /* Process/MFG sub-version */ #define SVR_FAM(svr) (((svr) >> 20) & 0xFFF) /* Family field */ @@ -1119,6 +1113,9 @@ #define SVR_T4240 0x824000 #define SVR_T4120 0x824001 #define SVR_T4160 0x824100 +#define SVR_C291 0x850000 +#define SVR_C292 0x850020 +#define SVR_C293 0x850030 #define SVR_B4860 0X868000 #define SVR_G4860 0x868001 #define SVR_G4060 0x868003 diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h index f17b146da..5916f7ce9 100644 --- a/arch/powerpc/include/asm/u-boot.h +++ b/arch/powerpc/include/asm/u-boot.h @@ -67,7 +67,6 @@ typedef struct bd_info { unsigned int bi_baudrate; /* Console Baudrate */ #if defined(CONFIG_405) || \ defined(CONFIG_405GP) || \ - defined(CONFIG_405CR) || \ defined(CONFIG_405EP) || \ defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || \ diff --git a/arch/x86/cpu/coreboot/config.mk b/arch/x86/cpu/coreboot/config.mk deleted file mode 100644 index 0bbd2ffb5..000000000 --- a/arch/x86/cpu/coreboot/config.mk +++ /dev/null @@ -1,7 +0,0 @@ -# -# Copyright (c) 2012 The Chromium OS Authors. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_ARCH_DEVICE_TREE := coreboot diff --git a/arch/x86/cpu/coreboot/tables.c b/arch/x86/cpu/coreboot/tables.c index b116d5955..0d91adc5e 100644 --- a/arch/x86/cpu/coreboot/tables.c +++ b/arch/x86/cpu/coreboot/tables.c @@ -4,28 +4,7 @@ * Copyright (C) 2008 Advanced Micro Devices, Inc. * Copyright (C) 2009 coresystems GmbH * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause */ #include <common.h> diff --git a/arch/x86/include/asm/arch-coreboot/sysinfo.h b/arch/x86/include/asm/arch-coreboot/sysinfo.h index 78d3a9d49..8e4a61de7 100644 --- a/arch/x86/include/asm/arch-coreboot/sysinfo.h +++ b/arch/x86/include/asm/arch-coreboot/sysinfo.h @@ -3,28 +3,7 @@ * * Copyright (C) 2008 Advanced Micro Devices, Inc. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause */ #ifndef _COREBOOT_SYSINFO_H diff --git a/arch/x86/include/asm/arch-coreboot/tables.h b/arch/x86/include/asm/arch-coreboot/tables.h index ad34a8b0f..0d02fe059 100644 --- a/arch/x86/include/asm/arch-coreboot/tables.h +++ b/arch/x86/include/asm/arch-coreboot/tables.h @@ -3,28 +3,7 @@ * * Copyright (C) 2008 Advanced Micro Devices, Inc. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause */ #ifndef _COREBOOT_TABLES_H |