diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/cpu/armv7/exynos/clock.c | 279 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/exynos/clock_init.h | 17 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 352 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/exynos/dmc_common.c | 60 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c | 439 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/exynos/exynos5_setup.h | 764 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/exynos/pinmux.c | 260 | ||||
| -rw-r--r-- | arch/arm/dts/exynos5.dtsi | 198 | ||||
| -rw-r--r-- | arch/arm/dts/exynos5250.dtsi | 194 | ||||
| -rw-r--r-- | arch/arm/dts/exynos5420.dtsi | 70 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-exynos/board.h | 17 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-exynos/clk.h | 1 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-exynos/clock.h | 494 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-exynos/cpu.h | 52 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-exynos/dmc.h | 177 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-exynos/gpio.h | 143 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-exynos/periph.h | 3 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-exynos/power.h | 837 | 
18 files changed, 3892 insertions, 465 deletions
| diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 84a50470a..5bde9d180 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -96,7 +96,7 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k)  	freq = CONFIG_SYS_CLK_FREQ; -	if (pllreg == EPLL) { +	if (pllreg == EPLL || pllreg == RPLL) {  		k = k & 0xffff;  		/* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */  		fout = (m + k / PLL_DIV_65536) * (freq / (p * (1 << s))); @@ -117,7 +117,7 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k)  			div = PLL_DIV_1024;  		else if (proid_is_exynos4412())  			div = PLL_DIV_65535; -		else if (proid_is_exynos5250()) +		else if (proid_is_exynos5250() || proid_is_exynos5420())  			div = PLL_DIV_65536;  		else  			return 0; @@ -362,6 +362,43 @@ unsigned long clock_get_periph_rate(int peripheral)  		return 0;  } +/* exynos5420: return pll clock frequency */ +static unsigned long exynos5420_get_pll_clk(int pllreg) +{ +	struct exynos5420_clock *clk = +		(struct exynos5420_clock *)samsung_get_base_clock(); +	unsigned long r, k = 0; + +	switch (pllreg) { +	case APLL: +		r = readl(&clk->apll_con0); +		break; +	case MPLL: +		r = readl(&clk->mpll_con0); +		break; +	case EPLL: +		r = readl(&clk->epll_con0); +		k = readl(&clk->epll_con1); +		break; +	case VPLL: +		r = readl(&clk->vpll_con0); +		k = readl(&clk->vpll_con1); +		break; +	case BPLL: +		r = readl(&clk->bpll_con0); +		break; +	case RPLL: +		r = readl(&clk->rpll_con0); +		k = readl(&clk->rpll_con1); +		break; +	default: +		printf("Unsupported PLL (%d)\n", pllreg); +		return 0; +	} + +	return exynos_get_pll_clk(pllreg, r, k); +} +  /* exynos4: return ARM clock frequency */  static unsigned long exynos4_get_arm_clk(void)  { @@ -485,6 +522,27 @@ static unsigned long exynos4x12_get_pwm_clk(void)  	return pclk;  } +/* exynos5420: return pwm clock frequency */ +static unsigned long exynos5420_get_pwm_clk(void) +{ +	struct exynos5420_clock *clk = +		(struct exynos5420_clock *)samsung_get_base_clock(); +	unsigned long pclk, sclk; +	unsigned int ratio; + +	/* +	 * CLK_DIV_PERIC0 +	 * PWM_RATIO [31:28] +	 */ +	ratio = readl(&clk->div_peric0); +	ratio = (ratio >> 28) & 0xf; +	sclk = get_pll_clk(MPLL); + +	pclk = sclk / (ratio + 1); + +	return pclk; +} +  /* exynos4: return uart clock frequency */  static unsigned long exynos4_get_uart_clk(int dev_index)  { @@ -624,6 +682,53 @@ static unsigned long exynos5_get_uart_clk(int dev_index)  	return uclk;  } +/* exynos5420: return uart clock frequency */ +static unsigned long exynos5420_get_uart_clk(int dev_index) +{ +	struct exynos5420_clock *clk = +		(struct exynos5420_clock *)samsung_get_base_clock(); +	unsigned long uclk, sclk; +	unsigned int sel; +	unsigned int ratio; + +	/* +	 * CLK_SRC_PERIC0 +	 * UART0_SEL [6:4] +	 * UART1_SEL [10:8] +	 * UART2_SEL [14:12] +	 * UART3_SEL [18:16] +	 * generalised calculation as follows +	 * sel = (sel >> ((dev_index * 4) + 4)) & mask; +	 */ +	sel = readl(&clk->src_peric0); +	sel = (sel >> ((dev_index * 4) + 4)) & 0x7; + +	if (sel == 0x3) +		sclk = get_pll_clk(MPLL); +	else if (sel == 0x6) +		sclk = get_pll_clk(EPLL); +	else if (sel == 0x7) +		sclk = get_pll_clk(RPLL); +	else +		return 0; + +	/* +	 * CLK_DIV_PERIC0 +	 * UART0_RATIO [11:8] +	 * UART1_RATIO [15:12] +	 * UART2_RATIO [19:16] +	 * UART3_RATIO [23:20] +	 * generalised calculation as follows +	 * ratio = (ratio >> ((dev_index * 4) + 8)) & mask; +	 */ +	ratio = readl(&clk->div_peric0); +	ratio = (ratio >> ((dev_index * 4) + 8)) & 0xf; + +	uclk = sclk / (ratio + 1); + +	return uclk; +} +  static unsigned long exynos4_get_mmc_clk(int dev_index)  {  	struct exynos4_clock *clk = @@ -718,6 +823,47 @@ static unsigned long exynos5_get_mmc_clk(int dev_index)  	return uclk;  } +static unsigned long exynos5420_get_mmc_clk(int dev_index) +{ +	struct exynos5420_clock *clk = +		(struct exynos5420_clock *)samsung_get_base_clock(); +	unsigned long uclk, sclk; +	unsigned int sel, ratio; + +	/* +	 * CLK_SRC_FSYS +	 * MMC0_SEL [10:8] +	 * MMC1_SEL [14:12] +	 * MMC2_SEL [18:16] +	 * generalised calculation as follows +	 * sel = (sel >> ((dev_index * 4) + 8)) & mask +	 */ +	sel = readl(&clk->src_fsys); +	sel = (sel >> ((dev_index * 4) + 8)) & 0x7; + +	if (sel == 0x3) +		sclk = get_pll_clk(MPLL); +	else if (sel == 0x6) +		sclk = get_pll_clk(EPLL); +	else +		return 0; + +	/* +	 * CLK_DIV_FSYS1 +	 * MMC0_RATIO [9:0] +	 * MMC1_RATIO [19:10] +	 * MMC2_RATIO [29:20] +	 * generalised calculation as follows +	 * ratio = (ratio >> (dev_index * 10)) & mask +	 */ +	ratio = readl(&clk->div_fsys1); +	ratio = (ratio >> (dev_index * 10)) & 0x3ff; + +	uclk = (sclk / (ratio + 1)); + +	return uclk; +} +  /* exynos4: set the mmc clock */  static void exynos4_set_mmc_clk(int dev_index, unsigned int div)  { @@ -804,6 +950,29 @@ static void exynos5_set_mmc_clk(int dev_index, unsigned int div)  	writel(val, addr);  } +/* exynos5: set the mmc clock */ +static void exynos5420_set_mmc_clk(int dev_index, unsigned int div) +{ +	struct exynos5420_clock *clk = +		(struct exynos5420_clock *)samsung_get_base_clock(); +	unsigned int addr; +	unsigned int val, shift; + +	/* +	 * CLK_DIV_FSYS1 +	 * MMC0_RATIO [9:0] +	 * MMC1_RATIO [19:10] +	 * MMC2_RATIO [29:20] +	 */ +	addr = (unsigned int)&clk->div_fsys1; +	shift = dev_index * 10; + +	val = readl(addr); +	val &= ~(0x3ff << shift); +	val |= (div & 0x3ff) << shift; +	writel(val, addr); +} +  /* get_lcd_clk: return lcd clock frequency */  static unsigned long exynos4_get_lcd_clk(void)  { @@ -1324,6 +1493,71 @@ static int exynos5_set_spi_clk(enum periph_id periph_id,  	return 0;  } +static int exynos5420_set_spi_clk(enum periph_id periph_id, +					unsigned int rate) +{ +	struct exynos5420_clock *clk = +		(struct exynos5420_clock *)samsung_get_base_clock(); +	int main; +	unsigned int fine; +	unsigned shift, pre_shift; +	unsigned div_mask = 0xf, pre_div_mask = 0xff; +	u32 *reg; +	u32 *pre_reg; + +	main = clock_calc_best_scalar(4, 8, 400000000, rate, &fine); +	if (main < 0) { +		debug("%s: Cannot set clock rate for periph %d", +		      __func__, periph_id); +		return -1; +	} +	main = main - 1; +	fine = fine - 1; + +	switch (periph_id) { +	case PERIPH_ID_SPI0: +		reg = &clk->div_peric1; +		shift = 20; +		pre_reg = &clk->div_peric4; +		pre_shift = 8; +		break; +	case PERIPH_ID_SPI1: +		reg = &clk->div_peric1; +		shift = 24; +		pre_reg = &clk->div_peric4; +		pre_shift = 16; +		break; +	case PERIPH_ID_SPI2: +		reg = &clk->div_peric1; +		shift = 28; +		pre_reg = &clk->div_peric4; +		pre_shift = 24; +		break; +	case PERIPH_ID_SPI3: +		reg = &clk->div_isp1; +		shift = 16; +		pre_reg = &clk->div_isp1; +		pre_shift = 0; +		break; +	case PERIPH_ID_SPI4: +		reg = &clk->div_isp1; +		shift = 20; +		pre_reg = &clk->div_isp1; +		pre_shift = 8; +		break; +	default: +		debug("%s: Unsupported peripheral ID %d\n", __func__, +		      periph_id); +		return -1; +	} + +	clrsetbits_le32(reg, div_mask << shift, (main & div_mask) << shift); +	clrsetbits_le32(pre_reg, pre_div_mask << pre_shift, +			(fine & pre_div_mask) << pre_shift); + +	return 0; +} +  static unsigned long exynos4_get_i2c_clk(void)  {  	struct exynos4_clock *clk = @@ -1341,9 +1575,11 @@ static unsigned long exynos4_get_i2c_clk(void)  unsigned long get_pll_clk(int pllreg)  { -	if (cpu_is_exynos5()) +	if (cpu_is_exynos5()) { +		if (proid_is_exynos5420()) +			return exynos5420_get_pll_clk(pllreg);  		return exynos5_get_pll_clk(pllreg); -	else { +	} else {  		if (proid_is_exynos4412())  			return exynos4x12_get_pll_clk(pllreg);  		return exynos4_get_pll_clk(pllreg); @@ -1375,9 +1611,11 @@ unsigned long get_i2c_clk(void)  unsigned long get_pwm_clk(void)  { -	if (cpu_is_exynos5()) +	if (cpu_is_exynos5()) { +		if (proid_is_exynos5420()) +			return exynos5420_get_pwm_clk();  		return clock_get_periph_rate(PERIPH_ID_PWM0); -	else { +	} else {  		if (proid_is_exynos4412())  			return exynos4x12_get_pwm_clk();  		return exynos4_get_pwm_clk(); @@ -1386,9 +1624,11 @@ unsigned long get_pwm_clk(void)  unsigned long get_uart_clk(int dev_index)  { -	if (cpu_is_exynos5()) +	if (cpu_is_exynos5()) { +		if (proid_is_exynos5420()) +			return exynos5420_get_uart_clk(dev_index);  		return exynos5_get_uart_clk(dev_index); -	else { +	} else {  		if (proid_is_exynos4412())  			return exynos4x12_get_uart_clk(dev_index);  		return exynos4_get_uart_clk(dev_index); @@ -1397,17 +1637,23 @@ unsigned long get_uart_clk(int dev_index)  unsigned long get_mmc_clk(int dev_index)  { -	if (cpu_is_exynos5()) +	if (cpu_is_exynos5()) { +		if (proid_is_exynos5420()) +			return exynos5420_get_mmc_clk(dev_index);  		return exynos5_get_mmc_clk(dev_index); -	else +	} else {  		return exynos4_get_mmc_clk(dev_index); +	}  }  void set_mmc_clk(int dev_index, unsigned int div)  { -	if (cpu_is_exynos5()) -		exynos5_set_mmc_clk(dev_index, div); -	else { +	if (cpu_is_exynos5()) { +		if (proid_is_exynos5420()) +			exynos5420_set_mmc_clk(dev_index, div); +		else +			exynos5_set_mmc_clk(dev_index, div); +	} else {  		if (proid_is_exynos4412())  			exynos4x12_set_mmc_clk(dev_index, div);  		else @@ -1439,10 +1685,13 @@ void set_mipi_clk(void)  int set_spi_clk(int periph_id, unsigned int rate)  { -	if (cpu_is_exynos5()) +	if (cpu_is_exynos5()) { +		if (proid_is_exynos5420()) +			return exynos5420_set_spi_clk(periph_id, rate);  		return exynos5_set_spi_clk(periph_id, rate); -	else +	} else {  		return 0; +	}  }  int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq, diff --git a/arch/arm/cpu/armv7/exynos/clock_init.h b/arch/arm/cpu/armv7/exynos/clock_init.h index c28ff3ab1..a875d0b48 100644 --- a/arch/arm/cpu/armv7/exynos/clock_init.h +++ b/arch/arm/cpu/armv7/exynos/clock_init.h @@ -10,7 +10,11 @@  #define __EXYNOS_CLOCK_INIT_H  enum { +#ifdef CONFIG_EXYNOS5420 +	MEM_TIMINGS_MSR_COUNT	= 5, +#else  	MEM_TIMINGS_MSR_COUNT	= 4, +#endif  };  /* These are the ratio's for configuring ARM clock */ @@ -59,6 +63,18 @@ struct mem_timings {  	unsigned bpll_mdiv;  	unsigned bpll_pdiv;  	unsigned bpll_sdiv; +	unsigned kpll_mdiv; +	unsigned kpll_pdiv; +	unsigned kpll_sdiv; +	unsigned dpll_mdiv; +	unsigned dpll_pdiv; +	unsigned dpll_sdiv; +	unsigned ipll_mdiv; +	unsigned ipll_pdiv; +	unsigned ipll_sdiv; +	unsigned spll_mdiv; +	unsigned spll_pdiv; +	unsigned spll_sdiv;  	unsigned pclk_cdrex_ratio;  	unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT]; @@ -115,6 +131,7 @@ struct mem_timings {  	uint8_t send_zq_init;		/* 1 to send this command */  	unsigned impedance;		/* drive strength impedeance */  	uint8_t gate_leveling_enable;	/* check gate leveling is enabled */ +	uint8_t read_leveling_enable;	/* check h/w read leveling is enabled */  };  /** diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c index a24c2f387..1d6977fa4 100644 --- a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c +++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c @@ -24,6 +24,24 @@  DECLARE_GLOBAL_DATA_PTR;  struct arm_clk_ratios arm_clk_ratios[] = { +#ifdef CONFIG_EXYNOS5420 +	{ +		.arm_freq_mhz = 900, + +		.apll_mdiv = 0x96, +		.apll_pdiv = 0x2, +		.apll_sdiv = 0x1, + +		.arm2_ratio = 0x0, +		.apll_ratio = 0x3, +		.pclk_dbg_ratio = 0x6, +		.atb_ratio = 0x6, +		.periph_ratio = 0x7, +		.acp_ratio = 0x0, +		.cpud_ratio = 0x2, +		.arm_ratio = 0x0, +	} +#else  	{  		.arm_freq_mhz = 600, @@ -115,8 +133,133 @@ struct arm_clk_ratios arm_clk_ratios[] = {  		.cpud_ratio = 0x3,  		.arm_ratio = 0x0,  	} +#endif  }; +  struct mem_timings mem_timings[] = { +#ifdef CONFIG_EXYNOS5420 +	{ +		.mem_manuf = MEM_MANUF_SAMSUNG, +		.mem_type = DDR_MODE_DDR3, +		.frequency_mhz = 800, + +		/* MPLL @800MHz*/ +		.mpll_mdiv = 0xc8, +		.mpll_pdiv = 0x3, +		.mpll_sdiv = 0x1, +		/* CPLL @666MHz */ +		.cpll_mdiv = 0xde, +		.cpll_pdiv = 0x4, +		.cpll_sdiv = 0x1, +		/* EPLL @600MHz */ +		.epll_mdiv = 0x64, +		.epll_pdiv = 0x2, +		.epll_sdiv = 0x1, +		/* VPLL @430MHz */ +		.vpll_mdiv = 0xd7, +		.vpll_pdiv = 0x3, +		.vpll_sdiv = 0x2, +		/* BPLL @800MHz */ +		.bpll_mdiv = 0xc8, +		.bpll_pdiv = 0x3, +		.bpll_sdiv = 0x1, +		/* KPLL @600MHz */ +		.kpll_mdiv = 0x190, +		.kpll_pdiv = 0x4, +		.kpll_sdiv = 0x2, +		/* DPLL @600MHz */ +		.dpll_mdiv = 0x190, +		.dpll_pdiv = 0x4, +		.dpll_sdiv = 0x2, +		/* IPLL @370MHz */ +		.ipll_mdiv = 0xb9, +		.ipll_pdiv = 0x3, +		.ipll_sdiv = 0x2, +		/* SPLL @400MHz */ +		.spll_mdiv = 0xc8, +		.spll_pdiv = 0x3, +		.spll_sdiv = 0x2, + +		.direct_cmd_msr = { +			0x00020018, 0x00030000, 0x00010046, 0x00000d70, +			0x00000c70 +		}, +		.timing_ref = 0x000000bb, +		.timing_row = 0x6836650f, +		.timing_data = 0x3630580b, +		.timing_power = 0x41000a26, +		.phy0_dqs = 0x08080808, +		.phy1_dqs = 0x08080808, +		.phy0_dq = 0x08080808, +		.phy1_dq = 0x08080808, +		.phy0_tFS = 0x8, +		.phy1_tFS = 0x8, +		.phy0_pulld_dqs = 0xf, +		.phy1_pulld_dqs = 0xf, + +		.lpddr3_ctrl_phy_reset = 0x1, +		.ctrl_start_point = 0x10, +		.ctrl_inc = 0x10, +		.ctrl_start = 0x1, +		.ctrl_dll_on = 0x1, +		.ctrl_ref = 0x8, + +		.ctrl_force = 0x1a, +		.ctrl_rdlat = 0x0b, +		.ctrl_bstlen = 0x08, + +		.fp_resync = 0x8, +		.iv_size = 0x7, +		.dfi_init_start = 1, +		.aref_en = 1, + +		.rd_fetch = 0x3, + +		.zq_mode_dds = 0x7, +		.zq_mode_term = 0x1, +		.zq_mode_noterm = 1, + +		/* +		* Dynamic Clock: Always Running +		* Memory Burst length: 8 +		* Number of chips: 1 +		* Memory Bus width: 32 bit +		* Memory Type: DDR3 +		* Additional Latancy for PLL: 0 Cycle +		*/ +		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | +			DMC_MEMCONTROL_DPWRDN_DISABLE | +			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | +			DMC_MEMCONTROL_TP_DISABLE | +			DMC_MEMCONTROL_DSREF_DISABLE | +			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | +			DMC_MEMCONTROL_MEM_TYPE_DDR3 | +			DMC_MEMCONTROL_MEM_WIDTH_32BIT | +			DMC_MEMCONTROL_NUM_CHIP_1 | +			DMC_MEMCONTROL_BL_8 | +			DMC_MEMCONTROL_PZQ_DISABLE | +			DMC_MEMCONTROL_MRR_BYTE_7_0, +		.memconfig = DMC_MEMCONFIG_CHIP_MAP_SPLIT | +			DMC_MEMCONFIGX_CHIP_COL_10 | +			DMC_MEMCONFIGX_CHIP_ROW_15 | +			DMC_MEMCONFIGX_CHIP_BANK_8, +		.prechconfig_tp_cnt = 0xff, +		.dpwrdn_cyc = 0xff, +		.dsref_cyc = 0xffff, +		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | +			DMC_CONCONTROL_TIMEOUT_LEVEL0 | +			DMC_CONCONTROL_RD_FETCH_DISABLE | +			DMC_CONCONTROL_EMPTY_DISABLE | +			DMC_CONCONTROL_AREF_EN_DISABLE | +			DMC_CONCONTROL_IO_PD_CON_DISABLE, +		.dmc_channels = 1, +		.chips_per_channel = 1, +		.chips_to_configure = 1, +		.send_zq_init = 1, +		.gate_leveling_enable = 1, +		.read_leveling_enable = 0, +	} +#else  	{  		.mem_manuf = MEM_MANUF_ELPIDA,  		.mem_type = DDR_MODE_DDR3, @@ -324,6 +467,7 @@ struct mem_timings mem_timings[] = {  		.impedance = IMP_OUTPUT_DRV_40_OHM,  		.gate_leveling_enable = 1,  	} +#endif  };  /** @@ -399,7 +543,7 @@ struct mem_timings *clock_get_mem_timings(void)  	return NULL;  } -void system_clock_init() +static void exynos5250_system_clock_init(void)  {  	struct exynos5_clock *clk =  		(struct exynos5_clock *)samsung_get_base_clock(); @@ -436,19 +580,13 @@ void system_clock_init()  	} while ((val | MUX_BPLL_SEL_MASK) != val);  	/* PLL locktime */ -	writel(APLL_LOCK_VAL, &clk->apll_lock); - -	writel(MPLL_LOCK_VAL, &clk->mpll_lock); - -	writel(BPLL_LOCK_VAL, &clk->bpll_lock); - -	writel(CPLL_LOCK_VAL, &clk->cpll_lock); - -	writel(GPLL_LOCK_VAL, &clk->gpll_lock); - -	writel(EPLL_LOCK_VAL, &clk->epll_lock); - -	writel(VPLL_LOCK_VAL, &clk->vpll_lock); +	writel(mem->apll_pdiv * PLL_LOCK_FACTOR, &clk->apll_lock); +	writel(mem->mpll_pdiv * PLL_LOCK_FACTOR, &clk->mpll_lock); +	writel(mem->bpll_pdiv * PLL_LOCK_FACTOR, &clk->bpll_lock); +	writel(mem->cpll_pdiv * PLL_LOCK_FACTOR, &clk->cpll_lock); +	writel(mem->gpll_pdiv * PLL_X_LOCK_FACTOR, &clk->gpll_lock); +	writel(mem->epll_pdiv * PLL_X_LOCK_FACTOR, &clk->epll_lock); +	writel(mem->vpll_pdiv * PLL_X_LOCK_FACTOR, &clk->vpll_lock);  	writel(CLK_REG_DISABLE, &clk->pll_div2_sel); @@ -640,6 +778,192 @@ void system_clock_init()  	writel(val, &clk->div_fsys2);  } +static void exynos5420_system_clock_init(void) +{ +	struct exynos5420_clock *clk = +		(struct exynos5420_clock *)samsung_get_base_clock(); +	struct mem_timings *mem; +	struct arm_clk_ratios *arm_clk_ratio; +	u32 val; + +	mem = clock_get_mem_timings(); +	arm_clk_ratio = get_arm_ratios(); + +	/* PLL locktime */ +	writel(arm_clk_ratio->apll_pdiv * PLL_LOCK_FACTOR, &clk->apll_lock); +	writel(mem->mpll_pdiv * PLL_LOCK_FACTOR, &clk->mpll_lock); +	writel(mem->bpll_pdiv * PLL_LOCK_FACTOR, &clk->bpll_lock); +	writel(mem->cpll_pdiv * PLL_LOCK_FACTOR, &clk->cpll_lock); +	writel(mem->dpll_pdiv * PLL_LOCK_FACTOR, &clk->dpll_lock); +	writel(mem->epll_pdiv * PLL_X_LOCK_FACTOR, &clk->epll_lock); +	writel(mem->vpll_pdiv * PLL_LOCK_FACTOR, &clk->vpll_lock); +	writel(mem->ipll_pdiv * PLL_LOCK_FACTOR, &clk->ipll_lock); +	writel(mem->spll_pdiv * PLL_LOCK_FACTOR, &clk->spll_lock); +	writel(mem->kpll_pdiv * PLL_LOCK_FACTOR, &clk->kpll_lock); + +	setbits_le32(&clk->src_cpu, MUX_HPM_SEL_MASK); + +	writel(0, &clk->src_top6); + +	writel(0, &clk->src_cdrex); +	writel(SRC_KFC_HPM_SEL, &clk->src_kfc); +	writel(HPM_RATIO,  &clk->div_cpu1); +	writel(CLK_DIV_CPU0_VAL,  &clk->div_cpu0); + +	/* switch A15 clock source to OSC clock before changing APLL */ +	clrbits_le32(&clk->src_cpu, APLL_FOUT); + +	/* Set APLL */ +	writel(APLL_CON1_VAL, &clk->apll_con1); +	val = set_pll(arm_clk_ratio->apll_mdiv, +		      arm_clk_ratio->apll_pdiv, +		      arm_clk_ratio->apll_sdiv); +	writel(val, &clk->apll_con0); +	while ((readl(&clk->apll_con0) & PLL_LOCKED) == 0) +		; + +	/* now it is safe to switch to APLL */ +	setbits_le32(&clk->src_cpu, APLL_FOUT); + +	writel(SRC_KFC_HPM_SEL, &clk->src_kfc); +	writel(CLK_DIV_KFC_VAL, &clk->div_kfc0); + +	/* switch A7 clock source to OSC clock before changing KPLL */ +	clrbits_le32(&clk->src_kfc, KPLL_FOUT); + +	/* Set KPLL*/ +	writel(KPLL_CON1_VAL, &clk->kpll_con1); +	val = set_pll(mem->kpll_mdiv, mem->kpll_pdiv, mem->kpll_sdiv); +	writel(val, &clk->kpll_con0); +	while ((readl(&clk->kpll_con0) & PLL_LOCKED) == 0) +		; + +	/* now it is safe to switch to KPLL */ +	setbits_le32(&clk->src_kfc, KPLL_FOUT); + +	/* Set MPLL */ +	writel(MPLL_CON1_VAL, &clk->mpll_con1); +	val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv); +	writel(val, &clk->mpll_con0); +	while ((readl(&clk->mpll_con0) & PLL_LOCKED) == 0) +		; + +	/* Set DPLL */ +	writel(DPLL_CON1_VAL, &clk->dpll_con1); +	val = set_pll(mem->dpll_mdiv, mem->dpll_pdiv, mem->dpll_sdiv); +	writel(val, &clk->dpll_con0); +	while ((readl(&clk->dpll_con0) & PLL_LOCKED) == 0) +		; + +	/* Set EPLL */ +	writel(EPLL_CON2_VAL, &clk->epll_con2); +	writel(EPLL_CON1_VAL, &clk->epll_con1); +	val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv); +	writel(val, &clk->epll_con0); +	while ((readl(&clk->epll_con0) & PLL_LOCKED) == 0) +		; + +	/* Set CPLL */ +	writel(CPLL_CON1_VAL, &clk->cpll_con1); +	val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv); +	writel(val, &clk->cpll_con0); +	while ((readl(&clk->cpll_con0) & PLL_LOCKED) == 0) +		; + +	/* Set IPLL */ +	writel(IPLL_CON1_VAL, &clk->ipll_con1); +	val = set_pll(mem->ipll_mdiv, mem->ipll_pdiv, mem->ipll_sdiv); +	writel(val, &clk->ipll_con0); +	while ((readl(&clk->ipll_con0) & PLL_LOCKED) == 0) +		; + +	/* Set VPLL */ +	writel(VPLL_CON1_VAL, &clk->vpll_con1); +	val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv); +	writel(val, &clk->vpll_con0); +	while ((readl(&clk->vpll_con0) & PLL_LOCKED) == 0) +		; + +	/* Set BPLL */ +	writel(BPLL_CON1_VAL, &clk->bpll_con1); +	val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv); +	writel(val, &clk->bpll_con0); +	while ((readl(&clk->bpll_con0) & PLL_LOCKED) == 0) +		; + +	/* Set SPLL */ +	writel(SPLL_CON1_VAL, &clk->spll_con1); +	val = set_pll(mem->spll_mdiv, mem->spll_pdiv, mem->spll_sdiv); +	writel(val, &clk->spll_con0); +	while ((readl(&clk->spll_con0) & PLL_LOCKED) == 0) +		; + +	writel(CLK_DIV_CDREX0_VAL, &clk->div_cdrex0); +	writel(CLK_DIV_CDREX1_VAL, &clk->div_cdrex1); + +	writel(CLK_SRC_TOP0_VAL, &clk->src_top0); +	writel(CLK_SRC_TOP1_VAL, &clk->src_top1); +	writel(CLK_SRC_TOP2_VAL, &clk->src_top2); +	writel(CLK_SRC_TOP7_VAL, &clk->src_top7); + +	writel(CLK_DIV_TOP0_VAL, &clk->div_top0); +	writel(CLK_DIV_TOP1_VAL, &clk->div_top1); +	writel(CLK_DIV_TOP2_VAL, &clk->div_top2); + +	writel(0, &clk->src_top10); +	writel(0, &clk->src_top11); +	writel(0, &clk->src_top12); + +	writel(CLK_SRC_TOP3_VAL, &clk->src_top3); +	writel(CLK_SRC_TOP4_VAL, &clk->src_top4); +	writel(CLK_SRC_TOP5_VAL, &clk->src_top5); + +	/* DISP1 BLK CLK SELECTION */ +	writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp10); +	writel(CLK_DIV_DISP1_0_VAL, &clk->div_disp10); + +	/* AUDIO BLK */ +	writel(AUDIO0_SEL_EPLL, &clk->src_mau); +	writel(DIV_MAU_VAL, &clk->div_mau); + +	/* FSYS */ +	writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys); +	writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0); +	writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1); +	writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2); + +	writel(CLK_SRC_ISP_VAL, &clk->src_isp); +	writel(CLK_DIV_ISP0_VAL, &clk->div_isp0); +	writel(CLK_DIV_ISP1_VAL, &clk->div_isp1); + +	writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0); +	writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1); + +	writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0); +	writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1); +	writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2); +	writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3); +	writel(CLK_DIV_PERIC4_VAL, &clk->div_peric4); + +	writel(CLK_DIV_CPERI1_VAL, &clk->div_cperi1); + +	writel(CLK_DIV2_RATIO, &clk->clkdiv2_ratio); +	writel(CLK_DIV4_RATIO, &clk->clkdiv4_ratio); +	writel(CLK_DIV_G2D, &clk->div_g2d); + +	writel(CLK_SRC_TOP6_VAL, &clk->src_top6); +	writel(CLK_SRC_CDREX_VAL, &clk->src_cdrex); +	writel(CLK_SRC_KFC_VAL, &clk->src_kfc); +} + +void system_clock_init(void) +{ +	if (proid_is_exynos5420()) +		exynos5420_system_clock_init(); +	else +		exynos5250_system_clock_init(); +} +  void clock_init_dp_clock(void)  {  	struct exynos5_clock *clk = diff --git a/arch/arm/cpu/armv7/exynos/dmc_common.c b/arch/arm/cpu/armv7/exynos/dmc_common.c index 53cfe6edb..cca925e42 100644 --- a/arch/arm/cpu/armv7/exynos/dmc_common.c +++ b/arch/arm/cpu/armv7/exynos/dmc_common.c @@ -1,5 +1,5 @@  /* - * Mem setup common file for different types of DDR present on SMDK5250 boards. + * Mem setup common file for different types of DDR present on Exynos boards.   *   * Copyright (C) 2012 Samsung Electronics   * @@ -15,9 +15,9 @@  #define ZQ_INIT_TIMEOUT	10000 -int dmc_config_zq(struct mem_timings *mem, -		  struct exynos5_phy_control *phy0_ctrl, -		  struct exynos5_phy_control *phy1_ctrl) +int dmc_config_zq(struct mem_timings *mem, uint32_t *phy0_con16, +			uint32_t *phy1_con16, uint32_t *phy0_con17, +			uint32_t *phy1_con17)  {  	unsigned long val = 0;  	int i; @@ -31,19 +31,19 @@ int dmc_config_zq(struct mem_timings *mem,  	val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT;  	val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT;  	val |= ZQ_CLK_DIV_EN; -	writel(val, &phy0_ctrl->phy_con16); -	writel(val, &phy1_ctrl->phy_con16); +	writel(val, phy0_con16); +	writel(val, phy1_con16);  	/* Disable termination */  	if (mem->zq_mode_noterm)  		val |= PHY_CON16_ZQ_MODE_NOTERM_MASK; -	writel(val, &phy0_ctrl->phy_con16); -	writel(val, &phy1_ctrl->phy_con16); +	writel(val, phy0_con16); +	writel(val, phy1_con16);  	/* ZQ_MANUAL_START: Enable */  	val |= ZQ_MANUAL_STR; -	writel(val, &phy0_ctrl->phy_con16); -	writel(val, &phy1_ctrl->phy_con16); +	writel(val, phy0_con16); +	writel(val, phy1_con16);  	/* ZQ_MANUAL_START: Disable */  	val &= ~ZQ_MANUAL_STR; @@ -53,47 +53,47 @@ int dmc_config_zq(struct mem_timings *mem,  	 * we are looping for the ZQ_init to complete.  	 */  	i = ZQ_INIT_TIMEOUT; -	while ((readl(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) { +	while ((readl(phy0_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {  		sdelay(100);  		i--;  	}  	if (!i)  		return -1; -	writel(val, &phy0_ctrl->phy_con16); +	writel(val, phy0_con16);  	i = ZQ_INIT_TIMEOUT; -	while ((readl(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) { +	while ((readl(phy1_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {  		sdelay(100);  		i--;  	}  	if (!i)  		return -1; -	writel(val, &phy1_ctrl->phy_con16); +	writel(val, phy1_con16);  	return 0;  } -void update_reset_dll(struct exynos5_dmc *dmc, enum ddr_mode mode) +void update_reset_dll(uint32_t *phycontrol0, enum ddr_mode mode)  {  	unsigned long val;  	if (mode == DDR_MODE_DDR3) {  		val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE; -		writel(val, &dmc->phycontrol0); +		writel(val, phycontrol0);  	}  	/* Update DLL Information: Force DLL Resyncronization */ -	val = readl(&dmc->phycontrol0); +	val = readl(phycontrol0);  	val |= FP_RSYNC; -	writel(val, &dmc->phycontrol0); +	writel(val, phycontrol0);  	/* Reset Force DLL Resyncronization */ -	val = readl(&dmc->phycontrol0); +	val = readl(phycontrol0);  	val &= ~FP_RSYNC; -	writel(val, &dmc->phycontrol0); +	writel(val, phycontrol0);  } -void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc) +void dmc_config_mrs(struct mem_timings *mem, uint32_t *directcmd)  {  	int channel, chip; @@ -107,7 +107,7 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)  			mask |= chip << DIRECT_CMD_CHIP_SHIFT;  			/* Sending NOP command */ -			writel(DIRECT_CMD_NOP | mask, &dmc->directcmd); +			writel(DIRECT_CMD_NOP | mask, directcmd);  			/*  			 * TODO(alim.akhtar@samsung.com): Do we need these @@ -119,14 +119,14 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)  			/* Sending EMRS/MRS commands */  			for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {  				writel(mem->direct_cmd_msr[i] | mask, -				       &dmc->directcmd); +				       directcmd);  				sdelay(0x10000);  			}  			if (mem->send_zq_init) {  				/* Sending ZQINIT command */  				writel(DIRECT_CMD_ZQINIT | mask, -				       &dmc->directcmd); +				       directcmd);  				sdelay(10000);  			} @@ -134,7 +134,7 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)  	}  } -void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc) +void dmc_config_prech(struct mem_timings *mem, uint32_t *directcmd)  {  	int channel, chip; @@ -146,20 +146,12 @@ void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc)  			mask |= chip << DIRECT_CMD_CHIP_SHIFT;  			/* PALL (all banks precharge) CMD */ -			writel(DIRECT_CMD_PALL | mask, &dmc->directcmd); +			writel(DIRECT_CMD_PALL | mask, directcmd);  			sdelay(0x10000);  		}  	}  } -void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc) -{ -	writel(mem->memconfig, &dmc->memconfig0); -	writel(mem->memconfig, &dmc->memconfig1); -	writel(DMC_MEMBASECONFIG0_VAL, &dmc->membaseconfig0); -	writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1); -} -  void mem_ctrl_init(int reset)  {  	struct spl_machine_param *param = spl_get_machine_params(); diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c index 5f5914ede..487e6f423 100644 --- a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c +++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c @@ -1,5 +1,5 @@  /* - * DDR3 mem setup file for SMDK5250 board based on EXYNOS5 + * DDR3 mem setup file for board based on EXYNOS5   *   * Copyright (C) 2012 Samsung Electronics   * @@ -11,12 +11,14 @@  #include <asm/arch/clock.h>  #include <asm/arch/cpu.h>  #include <asm/arch/dmc.h> +#include <asm/arch/power.h>  #include "common_setup.h"  #include "exynos5_setup.h"  #include "clock_init.h" -#define RDLVL_COMPLETE_TIMEOUT	10000 +#define TIMEOUT	10000 +#ifdef CONFIG_EXYNOS5250  static void reset_phy_ctrl(void)  {  	struct exynos5_clock *clk = @@ -57,7 +59,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,  	writel(val, &phy1_ctrl->phy_con42);  	/* ZQ Calibration */ -	if (dmc_config_zq(mem, phy0_ctrl, phy1_ctrl)) +	if (dmc_config_zq(mem, &phy0_ctrl->phy_con16, &phy1_ctrl->phy_con16, +			  &phy0_ctrl->phy_con17, &phy1_ctrl->phy_con17))  		return SETUP_ERR_ZQ_CALIBRATION_FAILURE;  	/* DQ Signal */ @@ -68,7 +71,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,  		| (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT),  		&dmc->concontrol); -	update_reset_dll(dmc, DDR_MODE_DDR3); +	update_reset_dll(&dmc->phycontrol0, DDR_MODE_DDR3);  	/* DQS Signal */  	writel(mem->phy0_dqs, &phy0_ctrl->phy_con4); @@ -93,7 +96,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,  	writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),  	       &phy1_ctrl->phy_con12); -	update_reset_dll(dmc, DDR_MODE_DDR3); +	update_reset_dll(&dmc->phycontrol0, DDR_MODE_DDR3);  	writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),  	       &dmc->concontrol); @@ -124,10 +127,10 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,  	writel(mem->timing_power, &dmc->timingpower);  	/* Send PALL command */ -	dmc_config_prech(mem, dmc); +	dmc_config_prech(mem, &dmc->directcmd);  	/* Send NOP, MRS and ZQINIT commands */ -	dmc_config_mrs(mem, dmc); +	dmc_config_mrs(mem, &dmc->directcmd);  	if (mem->gate_leveling_enable) {  		val = PHY_CON0_RESET_VAL; @@ -174,7 +177,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,  		writel(val, &phy1_ctrl->phy_con1);  		writel(CTRL_RDLVL_GATE_ENABLE, &dmc->rdlvl_config); -		i = RDLVL_COMPLETE_TIMEOUT; +		i = TIMEOUT;  		while ((readl(&dmc->phystatus) &  			(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1)) !=  			(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1) && i > 0) { @@ -202,11 +205,11 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,  		writel(val, &phy0_ctrl->phy_con12);  		writel(val, &phy1_ctrl->phy_con12); -		update_reset_dll(dmc, DDR_MODE_DDR3); +		update_reset_dll(&dmc->phycontrol0, DDR_MODE_DDR3);  	}  	/* Send PALL command */ -	dmc_config_prech(mem, dmc); +	dmc_config_prech(mem, &dmc->directcmd);  	writel(mem->memcontrol, &dmc->memcontrol); @@ -215,3 +218,419 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,  		| (mem->aref_en << CONCONTROL_AREF_EN_SHIFT), &dmc->concontrol);  	return 0;  } +#endif + +#ifdef CONFIG_EXYNOS5420 +int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size, +		       int reset) +{ +	struct exynos5420_clock *clk = +		(struct exynos5420_clock *)samsung_get_base_clock(); +	struct exynos5420_power *power = +		(struct exynos5420_power *)samsung_get_base_power(); +	struct exynos5420_phy_control *phy0_ctrl, *phy1_ctrl; +	struct exynos5420_dmc *drex0, *drex1; +	struct exynos5420_tzasc *tzasc0, *tzasc1; +	uint32_t val, n_lock_r, n_lock_w_phy0, n_lock_w_phy1; +	int chip; +	int i; + +	phy0_ctrl = (struct exynos5420_phy_control *)samsung_get_base_dmc_phy(); +	phy1_ctrl = (struct exynos5420_phy_control *)(samsung_get_base_dmc_phy() +							+ DMC_OFFSET); +	drex0 = (struct exynos5420_dmc *)samsung_get_base_dmc_ctrl(); +	drex1 = (struct exynos5420_dmc *)(samsung_get_base_dmc_ctrl() +							+ DMC_OFFSET); +	tzasc0 = (struct exynos5420_tzasc *)samsung_get_base_dmc_tzasc(); +	tzasc1 = (struct exynos5420_tzasc *)(samsung_get_base_dmc_tzasc() +							+ DMC_OFFSET); + +	/* Enable PAUSE for DREX */ +	setbits_le32(&clk->pause, ENABLE_BIT); + +	/* Enable BYPASS mode */ +	setbits_le32(&clk->bpll_con1, BYPASS_EN); + +	writel(MUX_BPLL_SEL_FOUTBPLL, &clk->src_cdrex); +	do { +		val = readl(&clk->mux_stat_cdrex); +		val &= BPLL_SEL_MASK; +	} while (val != FOUTBPLL); + +	clrbits_le32(&clk->bpll_con1, BYPASS_EN); + +	/* Specify the DDR memory type as DDR3 */ +	val = readl(&phy0_ctrl->phy_con0); +	val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT); +	val |= (DDR_MODE_DDR3 << PHY_CON0_CTRL_DDR_MODE_SHIFT); +	writel(val, &phy0_ctrl->phy_con0); + +	val = readl(&phy1_ctrl->phy_con0); +	val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT); +	val |= (DDR_MODE_DDR3 << PHY_CON0_CTRL_DDR_MODE_SHIFT); +	writel(val, &phy1_ctrl->phy_con0); + +	/* Set Read Latency and Burst Length for PHY0 and PHY1 */ +	val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) | +		(mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT); +	writel(val, &phy0_ctrl->phy_con42); +	writel(val, &phy1_ctrl->phy_con42); + +	val = readl(&phy0_ctrl->phy_con26); +	val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET); +	val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET); +	writel(val, &phy0_ctrl->phy_con26); + +	val = readl(&phy1_ctrl->phy_con26); +	val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET); +	val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET); +	writel(val, &phy1_ctrl->phy_con26); + +	/* +	 * Set Driver strength for CK, CKE, CS & CA to 0x7 +	 * Set Driver strength for Data Slice 0~3 to 0x7 +	 */ +	val = (0x7 << CA_CK_DRVR_DS_OFFSET) | (0x7 << CA_CKE_DRVR_DS_OFFSET) | +		(0x7 << CA_CS_DRVR_DS_OFFSET) | (0x7 << CA_ADR_DRVR_DS_OFFSET); +	val |= (0x7 << DA_3_DS_OFFSET) | (0x7 << DA_2_DS_OFFSET) | +		(0x7 << DA_1_DS_OFFSET) | (0x7 << DA_0_DS_OFFSET); +	writel(val, &phy0_ctrl->phy_con39); +	writel(val, &phy1_ctrl->phy_con39); + +	/* ZQ Calibration */ +	if (dmc_config_zq(mem, &phy0_ctrl->phy_con16, &phy1_ctrl->phy_con16, +			  &phy0_ctrl->phy_con17, &phy1_ctrl->phy_con17)) +		return SETUP_ERR_ZQ_CALIBRATION_FAILURE; + +	clrbits_le32(&phy0_ctrl->phy_con16, ZQ_CLK_DIV_EN); +	clrbits_le32(&phy1_ctrl->phy_con16, ZQ_CLK_DIV_EN); + +	/* DQ Signal */ +	val = readl(&phy0_ctrl->phy_con14); +	val |= mem->phy0_pulld_dqs; +	writel(val, &phy0_ctrl->phy_con14); +	val = readl(&phy1_ctrl->phy_con14); +	val |= mem->phy1_pulld_dqs; +	writel(val, &phy1_ctrl->phy_con14); + +	val = MEM_TERM_EN | PHY_TERM_EN; +	writel(val, &drex0->phycontrol0); +	writel(val, &drex1->phycontrol0); + +	writel(mem->concontrol | +		(mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) | +		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT), +		&drex0->concontrol); +	writel(mem->concontrol | +		(mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) | +		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT), +		&drex1->concontrol); + +	do { +		val = readl(&drex0->phystatus); +	} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE); +	do { +		val = readl(&drex1->phystatus); +	} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE); + +	clrbits_le32(&drex0->concontrol, DFI_INIT_START); +	clrbits_le32(&drex1->concontrol, DFI_INIT_START); + +	update_reset_dll(&drex0->phycontrol0, DDR_MODE_DDR3); +	update_reset_dll(&drex1->phycontrol0, DDR_MODE_DDR3); + +	/* +	 * Set Base Address: +	 * 0x2000_0000 ~ 0x5FFF_FFFF +	 * 0x6000_0000 ~ 0x9FFF_FFFF +	 */ +	/* MEMBASECONFIG0 */ +	val = DMC_MEMBASECONFIGX_CHIP_BASE(DMC_CHIP_BASE_0) | +		DMC_MEMBASECONFIGX_CHIP_MASK(DMC_CHIP_MASK); +	writel(val, &tzasc0->membaseconfig0); +	writel(val, &tzasc1->membaseconfig0); + +	/* MEMBASECONFIG1 */ +	val = DMC_MEMBASECONFIGX_CHIP_BASE(DMC_CHIP_BASE_1) | +		DMC_MEMBASECONFIGX_CHIP_MASK(DMC_CHIP_MASK); +	writel(val, &tzasc0->membaseconfig1); +	writel(val, &tzasc1->membaseconfig1); + +	/* +	 * Memory Channel Inteleaving Size +	 * Ares Channel interleaving = 128 bytes +	 */ +	/* MEMCONFIG0/1 */ +	writel(mem->memconfig, &tzasc0->memconfig0); +	writel(mem->memconfig, &tzasc1->memconfig0); +	writel(mem->memconfig, &tzasc0->memconfig1); +	writel(mem->memconfig, &tzasc1->memconfig1); + +	/* Precharge Configuration */ +	writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT, +	       &drex0->prechconfig0); +	writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT, +	       &drex1->prechconfig0); + +	/* +	 * TimingRow, TimingData, TimingPower and Timingaref +	 * values as per Memory AC parameters +	 */ +	writel(mem->timing_ref, &drex0->timingref); +	writel(mem->timing_ref, &drex1->timingref); +	writel(mem->timing_row, &drex0->timingrow0); +	writel(mem->timing_row, &drex1->timingrow0); +	writel(mem->timing_data, &drex0->timingdata0); +	writel(mem->timing_data, &drex1->timingdata0); +	writel(mem->timing_power, &drex0->timingpower0); +	writel(mem->timing_power, &drex1->timingpower0); + +	if (reset) { +		/* +		 * Send NOP, MRS and ZQINIT commands +		 * Sending MRS command will reset the DRAM. We should not be +		 * reseting the DRAM after resume, this will lead to memory +		 * corruption as DRAM content is lost after DRAM reset +		 */ +		dmc_config_mrs(mem, &drex0->directcmd); +		dmc_config_mrs(mem, &drex1->directcmd); +	} else { +		/* +		 * During Suspend-Resume & S/W-Reset, as soon as PMU releases +		 * pad retention, CKE goes high. This causes memory contents +		 * not to be retained during DRAM initialization. Therfore, +		 * there is a new control register(0x100431e8[28]) which lets us +		 * release pad retention and retain the memory content until the +		 * initialization is complete. +		 */ +		writel(PAD_RETENTION_DRAM_COREBLK_VAL, +		       &power->pad_retention_dram_coreblk_option); +		do { +			val = readl(&power->pad_retention_dram_status); +		} while (val != 0x1); + +		/* +		 * CKE PAD retention disables DRAM self-refresh mode. +		 * Send auto refresh command for DRAM refresh. +		 */ +		for (i = 0; i < 128; i++) { +			for (chip = 0; chip < mem->chips_to_configure; chip++) { +				writel(DIRECT_CMD_REFA | +				       (chip << DIRECT_CMD_CHIP_SHIFT), +				       &drex0->directcmd); +				writel(DIRECT_CMD_REFA | +				       (chip << DIRECT_CMD_CHIP_SHIFT), +				       &drex1->directcmd); +			} +		} +	} + +	if (mem->gate_leveling_enable) { +		writel(PHY_CON0_RESET_VAL, &phy0_ctrl->phy_con0); +		writel(PHY_CON0_RESET_VAL, &phy1_ctrl->phy_con0); + +		setbits_le32(&phy0_ctrl->phy_con0, P0_CMD_EN); +		setbits_le32(&phy1_ctrl->phy_con0, P0_CMD_EN); + +		val = PHY_CON2_RESET_VAL; +		val |= INIT_DESKEW_EN; +		writel(val, &phy0_ctrl->phy_con2); +		writel(val, &phy1_ctrl->phy_con2); + +		val =  readl(&phy0_ctrl->phy_con1); +		val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET); +		writel(val, &phy0_ctrl->phy_con1); + +		val =  readl(&phy1_ctrl->phy_con1); +		val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET); +		writel(val, &phy1_ctrl->phy_con1); + +		n_lock_r = readl(&phy0_ctrl->phy_con13); +		n_lock_w_phy0 = (n_lock_r & CTRL_LOCK_COARSE_MASK) >> 2; +		n_lock_r = readl(&phy0_ctrl->phy_con12); +		n_lock_r &= ~CTRL_DLL_ON; +		n_lock_r |= n_lock_w_phy0; +		writel(n_lock_r, &phy0_ctrl->phy_con12); + +		n_lock_r = readl(&phy1_ctrl->phy_con13); +		n_lock_w_phy1 = (n_lock_r & CTRL_LOCK_COARSE_MASK) >> 2; +		n_lock_r = readl(&phy1_ctrl->phy_con12); +		n_lock_r &= ~CTRL_DLL_ON; +		n_lock_r |= n_lock_w_phy1; +		writel(n_lock_r, &phy1_ctrl->phy_con12); + +		val = (0x3 << DIRECT_CMD_BANK_SHIFT) | 0x4; +		for (chip = 0; chip < mem->chips_to_configure; chip++) { +			writel(val | (chip << DIRECT_CMD_CHIP_SHIFT), +			       &drex0->directcmd); +			writel(val | (chip << DIRECT_CMD_CHIP_SHIFT), +			       &drex1->directcmd); +		} + +		setbits_le32(&phy0_ctrl->phy_con2, RDLVL_GATE_EN); +		setbits_le32(&phy1_ctrl->phy_con2, RDLVL_GATE_EN); + +		setbits_le32(&phy0_ctrl->phy_con0, CTRL_SHGATE); +		setbits_le32(&phy1_ctrl->phy_con0, CTRL_SHGATE); + +		val = readl(&phy0_ctrl->phy_con1); +		val &= ~(CTRL_GATEDURADJ_MASK); +		writel(val, &phy0_ctrl->phy_con1); + +		val = readl(&phy1_ctrl->phy_con1); +		val &= ~(CTRL_GATEDURADJ_MASK); +		writel(val, &phy1_ctrl->phy_con1); + +		writel(CTRL_RDLVL_GATE_ENABLE, &drex0->rdlvl_config); +		i = TIMEOUT; +		while (((readl(&drex0->phystatus) & RDLVL_COMPLETE_CHO) != +			RDLVL_COMPLETE_CHO) && (i > 0)) { +			/* +			 * TODO(waihong): Comment on how long this take to +			 * timeout +			 */ +			sdelay(100); +			i--; +		} +		if (!i) +			return SETUP_ERR_RDLV_COMPLETE_TIMEOUT; +		writel(CTRL_RDLVL_GATE_DISABLE, &drex0->rdlvl_config); + +		writel(CTRL_RDLVL_GATE_ENABLE, &drex1->rdlvl_config); +		i = TIMEOUT; +		while (((readl(&drex1->phystatus) & RDLVL_COMPLETE_CHO) != +			RDLVL_COMPLETE_CHO) && (i > 0)) { +			/* +			 * TODO(waihong): Comment on how long this take to +			 * timeout +			 */ +			sdelay(100); +			i--; +		} +		if (!i) +			return SETUP_ERR_RDLV_COMPLETE_TIMEOUT; +		writel(CTRL_RDLVL_GATE_DISABLE, &drex1->rdlvl_config); + +		writel(0, &phy0_ctrl->phy_con14); +		writel(0, &phy1_ctrl->phy_con14); + +		val = (0x3 << DIRECT_CMD_BANK_SHIFT); +		for (chip = 0; chip < mem->chips_to_configure; chip++) { +			writel(val | (chip << DIRECT_CMD_CHIP_SHIFT), +			       &drex0->directcmd); +			writel(val | (chip << DIRECT_CMD_CHIP_SHIFT), +			       &drex1->directcmd); +		} + +		if (mem->read_leveling_enable) { +			/* Set Read DQ Calibration */ +			val = (0x3 << DIRECT_CMD_BANK_SHIFT) | 0x4; +			for (chip = 0; chip < mem->chips_to_configure; chip++) { +				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT), +				       &drex0->directcmd); +				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT), +				       &drex1->directcmd); +			} + +			val = readl(&phy0_ctrl->phy_con1); +			val |= READ_LEVELLING_DDR3; +			writel(val, &phy0_ctrl->phy_con1); +			val = readl(&phy1_ctrl->phy_con1); +			val |= READ_LEVELLING_DDR3; +			writel(val, &phy1_ctrl->phy_con1); + +			val = readl(&phy0_ctrl->phy_con2); +			val |= (RDLVL_EN | RDLVL_INCR_ADJ); +			writel(val, &phy0_ctrl->phy_con2); +			val = readl(&phy1_ctrl->phy_con2); +			val |= (RDLVL_EN | RDLVL_INCR_ADJ); +			writel(val, &phy1_ctrl->phy_con2); + +			setbits_le32(&drex0->rdlvl_config, +				     CTRL_RDLVL_DATA_ENABLE); +			i = TIMEOUT; +			while (((readl(&drex0->phystatus) & RDLVL_COMPLETE_CHO) +				 != RDLVL_COMPLETE_CHO) && (i > 0)) { +				/* +				 * TODO(waihong): Comment on how long this take +				 * to timeout +				 */ +				sdelay(100); +				i--; +			} +			if (!i) +				return SETUP_ERR_RDLV_COMPLETE_TIMEOUT; + +			clrbits_le32(&drex0->rdlvl_config, +				     CTRL_RDLVL_DATA_ENABLE); +			setbits_le32(&drex1->rdlvl_config, +				     CTRL_RDLVL_DATA_ENABLE); +			i = TIMEOUT; +			while (((readl(&drex1->phystatus) & RDLVL_COMPLETE_CHO) +				 != RDLVL_COMPLETE_CHO) && (i > 0)) { +				/* +				 * TODO(waihong): Comment on how long this take +				 * to timeout +				 */ +				sdelay(100); +				i--; +			} +			if (!i) +				return SETUP_ERR_RDLV_COMPLETE_TIMEOUT; + +			clrbits_le32(&drex1->rdlvl_config, +				     CTRL_RDLVL_DATA_ENABLE); + +			val = (0x3 << DIRECT_CMD_BANK_SHIFT); +			for (chip = 0; chip < mem->chips_to_configure; chip++) { +				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT), +				       &drex0->directcmd); +				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT), +				       &drex1->directcmd); +			} + +			update_reset_dll(&drex0->phycontrol0, DDR_MODE_DDR3); +			update_reset_dll(&drex1->phycontrol0, DDR_MODE_DDR3); +		} + +		/* Common Settings for Leveling */ +		val = PHY_CON12_RESET_VAL; +		writel((val + n_lock_w_phy0), &phy0_ctrl->phy_con12); +		writel((val + n_lock_w_phy1), &phy1_ctrl->phy_con12); + +		setbits_le32(&phy0_ctrl->phy_con2, DLL_DESKEW_EN); +		setbits_le32(&phy1_ctrl->phy_con2, DLL_DESKEW_EN); +	} + +	/* Send PALL command */ +	dmc_config_prech(mem, &drex0->directcmd); +	dmc_config_prech(mem, &drex1->directcmd); + +	writel(mem->memcontrol, &drex0->memcontrol); +	writel(mem->memcontrol, &drex1->memcontrol); + +	/* +	 * Set DMC Concontrol: Enable auto-refresh counter, provide +	 * read data fetch cycles and enable DREX auto set powerdown +	 * for input buffer of I/O in none read memory state. +	 */ +	writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) | +		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)| +		DMC_CONCONTROL_IO_PD_CON(0x2), +		&drex0->concontrol); +	writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) | +		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)| +		DMC_CONCONTROL_IO_PD_CON(0x2), +		&drex1->concontrol); + +	/* +	 * Enable Clock Gating Control for DMC +	 * this saves around 25 mw dmc power as compared to the power +	 * consumption without these bits enabled +	 */ +	setbits_le32(&drex0->cgcontrol, DMC_INTERNAL_CG); +	setbits_le32(&drex1->cgcontrol, DMC_INTERNAL_CG); + +	return 0; +} +#endif diff --git a/arch/arm/cpu/armv7/exynos/exynos5_setup.h b/arch/arm/cpu/armv7/exynos/exynos5_setup.h index 696b38675..53b0ace6e 100644 --- a/arch/arm/cpu/armv7/exynos/exynos5_setup.h +++ b/arch/arm/cpu/armv7/exynos/exynos5_setup.h @@ -12,42 +12,16 @@  #include <config.h>  #include <asm/arch/dmc.h> -/* APLL_CON1	*/ -#define APLL_CON1_VAL	(0x00203800) - -/* MPLL_CON1	*/ -#define MPLL_CON1_VAL   (0x00203800) - -/* CPLL_CON1	*/ -#define CPLL_CON1_VAL	(0x00203800) - -/* GPLL_CON1	*/ -#define GPLL_CON1_VAL	(0x00203800) - -/* EPLL_CON1, CON2	*/ -#define EPLL_CON1_VAL	0x00000000 -#define EPLL_CON2_VAL	0x00000080 - -/* VPLL_CON1, CON2	*/ -#define VPLL_CON1_VAL	0x00000000 -#define VPLL_CON2_VAL	0x00000080 +#define NOT_AVAILABLE		0 +#define DATA_MASK		0xFFFFF -/* BPLL_CON1	*/ -#define BPLL_CON1_VAL	0x00203800 +#define ENABLE_BIT		0x1 +#define DISABLE_BIT		0x0 +#define CA_SWAP_EN		(1 << 0)  /* Set PLL */  #define set_pll(mdiv, pdiv, sdiv)	(1<<31 | mdiv<<16 | pdiv<<8 | sdiv) -/* CLK_SRC_CPU	*/ -/* 0 = MOUTAPLL,  1 = SCLKMPLL	*/ -#define MUX_HPM_SEL             0 -#define MUX_CPU_SEL             0 -#define MUX_APLL_SEL            1 - -#define CLK_SRC_CPU_VAL		((MUX_HPM_SEL << 20)    \ -				| (MUX_CPU_SEL << 16)  \ -				| (MUX_APLL_SEL)) -  /* MEMCONTROL register bit fields */  #define DMC_MEMCONTROL_CLK_STOP_DISABLE	(0 << 0)  #define DMC_MEMCONTROL_DPWRDN_DISABLE	(0 << 1) @@ -78,6 +52,7 @@  /* MEMCONFIG0 register bit fields */  #define DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED     (1 << 12) +#define DMC_MEMCONFIG_CHIP_MAP_SPLIT		(2 << 12)  #define DMC_MEMCONFIGX_CHIP_COL_10              (3 << 8)  #define DMC_MEMCONFIGX_CHIP_ROW_14              (2 << 4)  #define DMC_MEMCONFIGX_CHIP_ROW_15              (3 << 4) @@ -90,6 +65,17 @@  	DMC_MEMBASECONFIGX_CHIP_MASK(0x780)     \  ) +/* + * As we use channel interleaving, therefore value of the base address + * register must be set as half of the bus base address + * RAM start addess is 0x2000_0000 which means chip_base is 0x20, so + * we need to set half 0x10 to the membaseconfigx registers + * see exynos5420 UM section 17.17.3.21 for more. + */ +#define DMC_CHIP_BASE_0 0x10 +#define DMC_CHIP_BASE_1 0x50 +#define DMC_CHIP_MASK	0x7C0 +  #define DMC_MEMBASECONFIG0_VAL  DMC_MEMBASECONFIG_VAL(0x40)  #define DMC_MEMBASECONFIG1_VAL  DMC_MEMBASECONFIG_VAL(0x80) @@ -113,29 +99,24 @@  /* COJCONTROL register bit fields */  #define DMC_CONCONTROL_IO_PD_CON_DISABLE	(0 << 3) +#define DMC_CONCONTROL_IO_PD_CON_ENABLE		(1 << 3)  #define DMC_CONCONTROL_AREF_EN_DISABLE		(0 << 5) +#define DMC_CONCONTROL_AREF_EN_ENABLE		(1 << 5)  #define DMC_CONCONTROL_EMPTY_DISABLE		(0 << 8)  #define DMC_CONCONTROL_EMPTY_ENABLE		(1 << 8)  #define DMC_CONCONTROL_RD_FETCH_DISABLE		(0x0 << 12)  #define DMC_CONCONTROL_TIMEOUT_LEVEL0		(0xFFF << 16)  #define DMC_CONCONTROL_DFI_INIT_START_DISABLE	(0 << 28) -/* CLK_DIV_CPU0_VAL */ -#define CLK_DIV_CPU0_VAL	((ARM2_RATIO << 28)             \ -				| (APLL_RATIO << 24)            \ -				| (PCLK_DBG_RATIO << 20)        \ -				| (ATB_RATIO << 16)             \ -				| (PERIPH_RATIO << 12)          \ -				| (ACP_RATIO << 8)              \ -				| (CPUD_RATIO << 4)             \ -				| (ARM_RATIO)) +#define DMC_CONCONTROL_VAL	0x1FFF2101 +#define DREX_CONCONTROL_VAL	DMC_CONCONTROL_VAL			\ +				| DMC_CONCONTROL_AREF_EN_ENABLE		\ +				| DMC_CONCONTROL_IO_PD_CON_ENABLE -/* CLK_FSYS */ -#define CLK_SRC_FSYS0_VAL              0x66666 -#define CLK_DIV_FSYS0_VAL	       0x0BB00000 +#define DMC_CONCONTROL_IO_PD_CON(x)		(x << 6) -/* CLK_DIV_CPU1	*/ +/* CLK_DIV_CPU1 */  #define HPM_RATIO               0x2  #define COPY_RATIO              0x0 @@ -164,10 +145,367 @@  /* CLK_DIV_SYSLFT */  #define CLK_DIV_SYSLFT_VAL      0x00000311 +#define MUX_APLL_SEL_MASK	(1 << 0) +#define MUX_MPLL_SEL_MASK	(1 << 8) +#define MPLL_SEL_MOUT_MPLLFOUT	(2 << 8) +#define MUX_CPLL_SEL_MASK	(1 << 8) +#define MUX_EPLL_SEL_MASK	(1 << 12) +#define MUX_VPLL_SEL_MASK	(1 << 16) +#define MUX_GPLL_SEL_MASK	(1 << 28) +#define MUX_BPLL_SEL_MASK	(1 << 0) +#define MUX_HPM_SEL_MASK	(1 << 20) +#define HPM_SEL_SCLK_MPLL	(1 << 21) +#define PLL_LOCKED		(1 << 29) +#define APLL_CON0_LOCKED	(1 << 29) +#define MPLL_CON0_LOCKED	(1 << 29) +#define BPLL_CON0_LOCKED	(1 << 29) +#define CPLL_CON0_LOCKED	(1 << 29) +#define EPLL_CON0_LOCKED	(1 << 29) +#define GPLL_CON0_LOCKED	(1 << 29) +#define VPLL_CON0_LOCKED	(1 << 29) +#define CLK_REG_DISABLE		0x0 +#define TOP2_VAL		0x0110000 + +/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */ +#define SPI0_ISP_SEL		6 +#define SPI1_ISP_SEL		6 +#define SCLK_SRC_ISP_VAL	(SPI1_ISP_SEL << 4) \ +				| (SPI0_ISP_SEL << 0) + +/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */ +#define SPI0_ISP_RATIO		0xf +#define SPI1_ISP_RATIO		0xf +#define SCLK_DIV_ISP_VAL	(SPI1_ISP_RATIO << 12) \ +				| (SPI0_ISP_RATIO << 0) + +/* CLK_DIV_FSYS2 */ +#define MMC2_RATIO_MASK		0xf +#define MMC2_RATIO_VAL		0x3 +#define MMC2_RATIO_OFFSET	0 + +#define MMC2_PRE_RATIO_MASK	0xff +#define MMC2_PRE_RATIO_VAL	0x9 +#define MMC2_PRE_RATIO_OFFSET	8 + +#define MMC3_RATIO_MASK		0xf +#define MMC3_RATIO_VAL		0x1 +#define MMC3_RATIO_OFFSET	16 + +#define MMC3_PRE_RATIO_MASK	0xff +#define MMC3_PRE_RATIO_VAL	0x0 +#define MMC3_PRE_RATIO_OFFSET	24 + +/* CLK_SRC_LEX */ +#define CLK_SRC_LEX_VAL         0x0 + +/* CLK_DIV_LEX */ +#define CLK_DIV_LEX_VAL         0x10 + +/* CLK_DIV_R0X */ +#define CLK_DIV_R0X_VAL         0x10 + +/* CLK_DIV_L0X */ +#define CLK_DIV_R1X_VAL         0x10 + +/* CLK_DIV_ISP2 */ +#define CLK_DIV_ISP2_VAL        0x1 + +/* CLK_SRC_KFC */ +#define SRC_KFC_HPM_SEL		(1 << 15) + +/* CLK_SRC_KFC */ +#define CLK_SRC_KFC_VAL		0x00008001 + +/* CLK_DIV_KFC */ +#define CLK_DIV_KFC_VAL		0x03300110 + +/* CLK_DIV2_RATIO */ +#define CLK_DIV2_RATIO		0x10111150 + +/* CLK_DIV4_RATIO */ +#define CLK_DIV4_RATIO		0x00000003 + +/* CLK_DIV_G2D */ +#define CLK_DIV_G2D		0x00000010 + +/* + * DIV_DISP1_0 + * For DP, divisor should be 2 + */ +#define CLK_DIV_DISP1_0_FIMD1	(2 << 0) + +/* CLK_GATE_IP_DISP1 */ +#define CLK_GATE_DP1_ALLOW	(1 << 4) + +/* AUDIO CLK SEL */ +#define AUDIO0_SEL_EPLL		(0x6 << 28) +#define AUDIO0_RATIO		0x5 +#define PCM0_RATIO		0x3 +#define DIV_MAU_VAL		(PCM0_RATIO << 24 | AUDIO0_RATIO << 20) + +/* CLK_SRC_CDREX */ +#define MUX_MCLK_CDR_MSPLL	(1 << 4) +#define MUX_BPLL_SEL_FOUTBPLL   (1 << 0) +#define BPLL_SEL_MASK   0x7 +#define FOUTBPLL        2 + +#define DDR3PHY_CTRL_PHY_RESET	(1 << 0) +#define DDR3PHY_CTRL_PHY_RESET_OFF	(0 << 0) + +#define PHY_CON0_RESET_VAL	0x17020a40 +#define P0_CMD_EN		(1 << 14) +#define BYTE_RDLVL_EN		(1 << 13) +#define CTRL_SHGATE		(1 << 8) + +#define PHY_CON1_RESET_VAL	0x09210100 +#define RDLVL_PASS_ADJ_VAL	0x6 +#define RDLVL_PASS_ADJ_OFFSET	16 +#define CTRL_GATEDURADJ_MASK	(0xf << 20) +#define READ_LEVELLING_DDR3	0x0100 + +#define PHY_CON2_RESET_VAL	0x00010004 +#define INIT_DESKEW_EN		(1 << 6) +#define DLL_DESKEW_EN		(1 << 12) +#define RDLVL_GATE_EN		(1 << 24) +#define RDLVL_EN		(1 << 25) +#define RDLVL_INCR_ADJ		(0x1 << 16) + +/* DREX_PAUSE */ +#define DREX_PAUSE_EN	(1 << 0) + +#define BYPASS_EN	(1 << 22) + +/* MEMMORY VAL */ +#define PHY_CON0_VAL	0x17021A00 + +#define PHY_CON12_RESET_VAL	0x10100070 +#define PHY_CON12_VAL		0x10107F50 +#define CTRL_START		(1 << 6) +#define CTRL_DLL_ON		(1 << 5) +#define CTRL_FORCE_MASK		(0x7F << 8) +#define CTRL_LOCK_COARSE_MASK	(0x7F << 10) + +#define CTRL_OFFSETD_RESET_VAL	0x8 +#define CTRL_OFFSETD_VAL	0x7F + +#define CTRL_OFFSETR0		0x7F +#define CTRL_OFFSETR1		0x7F +#define CTRL_OFFSETR2		0x7F +#define CTRL_OFFSETR3		0x7F +#define PHY_CON4_VAL	(CTRL_OFFSETR0 << 0 | \ +				CTRL_OFFSETR1 << 8 | \ +				CTRL_OFFSETR2 << 16 | \ +				CTRL_OFFSETR3 << 24) +#define PHY_CON4_RESET_VAL	0x08080808 + +#define CTRL_OFFSETW0		0x7F +#define CTRL_OFFSETW1		0x7F +#define CTRL_OFFSETW2		0x7F +#define CTRL_OFFSETW3		0x7F +#define PHY_CON6_VAL	(CTRL_OFFSETW0 << 0 | \ +				CTRL_OFFSETW1 << 8 | \ +				CTRL_OFFSETW2 << 16 | \ +				CTRL_OFFSETW3 << 24) +#define PHY_CON6_RESET_VAL	0x08080808 + +#define PHY_CON14_RESET_VAL	0x001F0000 +#define CTRL_PULLD_DQS		0xF +#define CTRL_PULLD_DQS_OFFSET	0 + +/* ZQ Configurations */ +#define PHY_CON16_RESET_VAL	0x08000304 + +#define ZQ_CLK_EN		(1 << 27) +#define ZQ_CLK_DIV_EN		(1 << 18) +#define ZQ_MANUAL_STR		(1 << 1) +#define ZQ_DONE			(1 << 0) +#define ZQ_MODE_DDS_OFFSET	24 + +#define CTRL_RDLVL_GATE_ENABLE	1 +#define CTRL_RDLVL_GATE_DISABLE	0 +#define CTRL_RDLVL_DATA_ENABLE	2 + +/* Direct Command */ +#define DIRECT_CMD_NOP			0x07000000 +#define DIRECT_CMD_PALL			0x01000000 +#define DIRECT_CMD_ZQINIT		0x0a000000 +#define DIRECT_CMD_CHANNEL_SHIFT	28 +#define DIRECT_CMD_CHIP_SHIFT		20 +#define DIRECT_CMD_BANK_SHIFT		16 +#define DIRECT_CMD_REFA		(5 << 24) +#define DIRECT_CMD_MRS1		0x71C00 +#define DIRECT_CMD_MRS2		0x10BFC +#define DIRECT_CMD_MRS3		0x0050C +#define DIRECT_CMD_MRS4		0x00868 +#define DIRECT_CMD_MRS5		0x00C04 + +/* Drive Strength */ +#define IMPEDANCE_48_OHM	4 +#define IMPEDANCE_40_OHM	5 +#define IMPEDANCE_34_OHM	6 +#define IMPEDANCE_30_OHM	7 +#define PHY_CON39_VAL_48_OHM	0x09240924 +#define PHY_CON39_VAL_40_OHM	0x0B6D0B6D +#define PHY_CON39_VAL_34_OHM	0x0DB60DB6 +#define PHY_CON39_VAL_30_OHM	0x0FFF0FFF + +#define CTRL_BSTLEN_OFFSET	8 +#define CTRL_RDLAT_OFFSET	0 + +#define CMD_DEFAULT_LPDDR3	0xF +#define CMD_DEFUALT_OFFSET	0 +#define T_WRDATA_EN		0x7 +#define T_WRDATA_EN_DDR3	0x8 +#define T_WRDATA_EN_OFFSET	16 +#define T_WRDATA_EN_MASK	0x1f + +#define PHY_CON31_VAL	0x0C183060 +#define PHY_CON32_VAL	0x60C18306 +#define PHY_CON33_VAL	0x00000030 + +#define PHY_CON31_RESET_VAL	0x0 +#define PHY_CON32_RESET_VAL	0x0 +#define PHY_CON33_RESET_VAL	0x0 + +#define SL_DLL_DYN_CON_EN	(1 << 1) +#define FP_RESYNC	(1 << 3) +#define CTRL_START	(1 << 6) + +#define DMC_AREF_EN		(1 << 5) +#define DMC_CONCONTROL_EMPTY	(1 << 8) +#define DFI_INIT_START		(1 << 28) + +#define DMC_MEMCONTROL_VAL	0x00312700 +#define CLK_STOP_EN		(1 << 0) +#define DPWRDN_EN		(1 << 1) +#define DSREF_EN		(1 << 5) + +#define MEMBASECONFIG_CHIP_MASK_VAL	0x7E0 +#define MEMBASECONFIG_CHIP_MASK_OFFSET	0 +#define MEMBASECONFIG0_CHIP_BASE_VAL	0x20 +#define MEMBASECONFIG1_CHIP_BASE_VAL	0x40 +#define CHIP_BASE_OFFSET		16 + +#define MEMCONFIG_VAL	0x1323 +#define PRECHCONFIG_DEFAULT_VAL	0xFF000000 +#define PWRDNCONFIG_DEFAULT_VAL	0xFFFF00FF + +#define TIMINGAREF_VAL	0x5d +#define TIMINGROW_VAL	0x345A8692 +#define TIMINGDATA_VAL	0x3630065C +#define TIMINGPOWER_VAL	0x50380336 +#define DFI_INIT_COMPLETE	(1 << 3) + +#define BRBRSVCONTROL_VAL	0x00000033 +#define BRBRSVCONFIG_VAL	0x88778877 + +/* Clock Gating Control (CGCONTROL) register */ +#define MEMIF_CG_EN	(1 << 3) /* Memory interface clock gating */ +#define SCG_CG_EN	(1 << 2) /* Scheduler clock gating */ +#define BUSIF_WR_CG_EN	(1 << 1) /* Bus interface write channel clock gating */ +#define BUSIF_RD_CG_EN	(1 << 0) /* Bus interface read channel clock gating */ +#define DMC_INTERNAL_CG	(MEMIF_CG_EN | SCG_CG_EN | \ +				 BUSIF_WR_CG_EN | BUSIF_RD_CG_EN) + +/* DMC PHY Control0 register */ +#define PHY_CONTROL0_RESET_VAL	0x0 +#define MEM_TERM_EN	(1 << 31)	/* Termination enable for memory */ +#define PHY_TERM_EN	(1 << 30)	/* Termination enable for PHY */ +#define DMC_CTRL_SHGATE	(1 << 29)	/* Duration of DQS gating signal */ +#define FP_RSYNC	(1 << 3)	/* Force DLL resyncronization */ + +/* Driver strength for CK, CKE, CS & CA */ +#define IMP_OUTPUT_DRV_40_OHM	0x5 +#define IMP_OUTPUT_DRV_30_OHM	0x7 +#define DA_3_DS_OFFSET		25 +#define DA_2_DS_OFFSET		22 +#define DA_1_DS_OFFSET		19 +#define DA_0_DS_OFFSET		16 +#define CA_CK_DRVR_DS_OFFSET	9 +#define CA_CKE_DRVR_DS_OFFSET	6 +#define CA_CS_DRVR_DS_OFFSET	3 +#define CA_ADR_DRVR_DS_OFFSET	0 + +#define PHY_CON42_CTRL_BSTLEN_SHIFT	8 +#define PHY_CON42_CTRL_RDLAT_SHIFT	0 + +/* + * Definitions that differ with SoC's. + * Below is the part defining macros for smdk5250. + * Else part introduces macros for smdk5420. + */ +#ifndef CONFIG_SMDK5420 + +/* APLL_CON1 */ +#define APLL_CON1_VAL	(0x00203800) + +/* MPLL_CON1 */ +#define MPLL_CON1_VAL   (0x00203800) + +/* CPLL_CON1 */ +#define CPLL_CON1_VAL	(0x00203800) + +/* DPLL_CON1 */ +#define DPLL_CON1_VAL	(NOT_AVAILABLE) + +/* GPLL_CON1 */ +#define GPLL_CON1_VAL	(0x00203800) + +/* EPLL_CON1, CON2 */ +#define EPLL_CON1_VAL	0x00000000 +#define EPLL_CON2_VAL	0x00000080 + +/* VPLL_CON1, CON2 */ +#define VPLL_CON1_VAL	0x00000000 +#define VPLL_CON2_VAL	0x00000080 + +/* RPLL_CON1, CON2 */ +#define RPLL_CON1_VAL	NOT_AVAILABLE +#define RPLL_CON2_VAL	NOT_AVAILABLE + +/* BPLL_CON1 */ +#define BPLL_CON1_VAL	0x00203800 + +/* SPLL_CON1 */ +#define SPLL_CON1_VAL	NOT_AVAILABLE + +/* IPLL_CON1 */ +#define IPLL_CON1_VAL	NOT_AVAILABLE + +/* KPLL_CON1 */ +#define KPLL_CON1_VAL	NOT_AVAILABLE + +/* CLK_SRC_ISP */ +#define CLK_SRC_ISP_VAL		NOT_AVAILABLE +#define CLK_DIV_ISP0_VAL	0x31 +#define CLK_DIV_ISP1_VAL	0x0 + +/* CLK_FSYS */ +#define CLK_SRC_FSYS0_VAL              0x66666 +#define CLK_DIV_FSYS0_VAL	       0x0BB00000 +#define CLK_DIV_FSYS1_VAL	       NOT_AVAILABLE +#define CLK_DIV_FSYS2_VAL	       NOT_AVAILABLE + +/* CLK_SRC_CPU */ +/* 0 = MOUTAPLL,  1 = SCLKMPLL */ +#define MUX_HPM_SEL             0 +#define MUX_CPU_SEL             0 +#define MUX_APLL_SEL            1 + +#define CLK_SRC_CPU_VAL		((MUX_HPM_SEL << 20)    \ +				| (MUX_CPU_SEL << 16)  \ +				| (MUX_APLL_SEL)) +  /* CLK_SRC_CDREX */  #define CLK_SRC_CDREX_VAL       0x1  /* CLK_DIV_CDREX */ +#define CLK_DIV_CDREX0_VAL	NOT_AVAILABLE +#define CLK_DIV_CDREX1_VAL	NOT_AVAILABLE + +/* CLK_DIV_CPU0_VAL */ +#define CLK_DIV_CPU0_VAL	NOT_AVAILABLE +  #define MCLK_CDREX2_RATIO       0x0  #define ACLK_EFCON_RATIO        0x1  #define MCLK_DPHY_RATIO		0x1 @@ -247,6 +585,11 @@  				| (MUX_ACLK_300_DISP1_SUB_SEL << 6)     \  				| (MUX_ACLK_200_DISP1_SUB_SEL << 4)) +#define CLK_SRC_TOP4_VAL	NOT_AVAILABLE +#define CLK_SRC_TOP5_VAL	NOT_AVAILABLE +#define CLK_SRC_TOP6_VAL	NOT_AVAILABLE +#define CLK_SRC_TOP7_VAL	NOT_AVAILABLE +  /* CLK_DIV_TOP0	*/  #define ACLK_300_DISP1_RATIO	0x2  #define ACLK_400_G3D_RATIO	0x0 @@ -279,40 +622,11 @@  				| (ACLK_400_IOP_RATIO << 16)		\  				| (ACLK_300_GSCL_RATIO << 12)) -/* APLL_LOCK	*/ -#define APLL_LOCK_VAL	(0x546) -/* MPLL_LOCK	*/ -#define MPLL_LOCK_VAL	(0x546) -/* CPLL_LOCK	*/ -#define CPLL_LOCK_VAL	(0x546) -/* GPLL_LOCK	*/ -#define GPLL_LOCK_VAL	(0x546) -/* EPLL_LOCK	*/ -#define EPLL_LOCK_VAL	(0x3A98) -/* VPLL_LOCK	*/ -#define VPLL_LOCK_VAL	(0x3A98) -/* BPLL_LOCK	*/ -#define BPLL_LOCK_VAL	(0x546) +#define CLK_DIV_TOP2_VAL	NOT_AVAILABLE -#define MUX_APLL_SEL_MASK	(1 << 0) -#define MUX_MPLL_SEL_MASK	(1 << 8) -#define MPLL_SEL_MOUT_MPLLFOUT	(2 << 8) -#define MUX_CPLL_SEL_MASK	(1 << 8) -#define MUX_EPLL_SEL_MASK	(1 << 12) -#define MUX_VPLL_SEL_MASK	(1 << 16) -#define MUX_GPLL_SEL_MASK	(1 << 28) -#define MUX_BPLL_SEL_MASK	(1 << 0) -#define MUX_HPM_SEL_MASK	(1 << 20) -#define HPM_SEL_SCLK_MPLL	(1 << 21) -#define APLL_CON0_LOCKED	(1 << 29) -#define MPLL_CON0_LOCKED	(1 << 29) -#define BPLL_CON0_LOCKED	(1 << 29) -#define CPLL_CON0_LOCKED	(1 << 29) -#define EPLL_CON0_LOCKED	(1 << 29) -#define GPLL_CON0_LOCKED	(1 << 29) -#define VPLL_CON0_LOCKED	(1 << 29) -#define CLK_REG_DISABLE		0x0 -#define TOP2_VAL		0x0110000 +/* PLL Lock Value Factor */ +#define PLL_LOCK_FACTOR		250 +#define PLL_X_LOCK_FACTOR	3000  /* CLK_SRC_PERIC0 */  #define PWM_SEL		6 @@ -336,18 +650,6 @@  				| (SPI1_SEL << 20) \  				| (SPI0_SEL << 16)) -/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */ -#define SPI0_ISP_SEL		6 -#define SPI1_ISP_SEL		6 -#define SCLK_SRC_ISP_VAL	(SPI1_ISP_SEL << 4) \ -				| (SPI0_ISP_SEL << 0) - -/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */ -#define SPI0_ISP_RATIO		0xf -#define SPI1_ISP_RATIO		0xf -#define SCLK_DIV_ISP_VAL	(SPI1_ISP_RATIO << 12) \ -				| (SPI0_ISP_RATIO << 0) -  /* CLK_DIV_PERIL0	*/  #define UART5_RATIO	7  #define UART4_RATIO	7 @@ -380,105 +682,201 @@  #define PWM_RATIO		8  #define CLK_DIV_PERIC3_VAL	(PWM_RATIO << 0) -/* CLK_DIV_FSYS2 */ -#define MMC2_RATIO_MASK		0xf -#define MMC2_RATIO_VAL		0x3 -#define MMC2_RATIO_OFFSET	0 -#define MMC2_PRE_RATIO_MASK	0xff -#define MMC2_PRE_RATIO_VAL	0x9 -#define MMC2_PRE_RATIO_OFFSET	8 +/* CLK_DIV_PERIC4 */ +#define CLK_DIV_PERIC4_VAL	NOT_AVAILABLE -#define MMC3_RATIO_MASK		0xf -#define MMC3_RATIO_VAL		0x1 -#define MMC3_RATIO_OFFSET	16 +/* CLK_SRC_DISP1_0 */ +#define CLK_SRC_DISP1_0_VAL	0x6 +#define CLK_DIV_DISP1_0_VAL	NOT_AVAILABLE -#define MMC3_PRE_RATIO_MASK	0xff -#define MMC3_PRE_RATIO_VAL	0x0 -#define MMC3_PRE_RATIO_OFFSET	24 +#define APLL_FOUT		(1 << 0) +#define KPLL_FOUT		NOT_AVAILABLE -/* CLK_SRC_LEX */ -#define CLK_SRC_LEX_VAL         0x0 +#define CLK_DIV_CPERI1_VAL	NOT_AVAILABLE -/* CLK_DIV_LEX */ -#define CLK_DIV_LEX_VAL         0x10 +#else +#define PAD_RETENTION_DRAM_COREBLK_VAL	0x10000000 -/* CLK_DIV_R0X */ -#define CLK_DIV_R0X_VAL         0x10 +/* APLL_CON1 */ +#define APLL_CON1_VAL	(0x0020F300) -/* CLK_DIV_L0X */ -#define CLK_DIV_R1X_VAL         0x10 +/* MPLL_CON1 */ +#define MPLL_CON1_VAL   (0x0020F300) -/* CLK_DIV_ISP0 */ -#define CLK_DIV_ISP0_VAL        0x31 -/* CLK_DIV_ISP1 */ -#define CLK_DIV_ISP1_VAL        0x0 +/* CPLL_CON1 */ +#define CPLL_CON1_VAL	0x0020f300 -/* CLK_DIV_ISP2 */ -#define CLK_DIV_ISP2_VAL        0x1 +/* DPLL_CON1 */ +#define DPLL_CON1_VAL	(0x0020F300) -/* CLK_SRC_DISP1_0 */ -#define CLK_SRC_DISP1_0_VAL	0x6 +/* GPLL_CON1 */ +#define GPLL_CON1_VAL	(NOT_AVAILABLE) -/* - * DIV_DISP1_0 - * For DP, divisor should be 2 - */ -#define CLK_DIV_DISP1_0_FIMD1	(2 << 0) -/* CLK_GATE_IP_DISP1 */ -#define CLK_GATE_DP1_ALLOW	(1 << 4) +/* EPLL_CON1, CON2 */ +#define EPLL_CON1_VAL	0x00000000 +#define EPLL_CON2_VAL	0x00000080 -#define DDR3PHY_CTRL_PHY_RESET	(1 << 0) -#define DDR3PHY_CTRL_PHY_RESET_OFF	(0 << 0) +/* VPLL_CON1, CON2 */ +#define VPLL_CON1_VAL	0x0020f300 +#define VPLL_CON2_VAL	NOT_AVAILABLE -#define PHY_CON0_RESET_VAL	0x17020a40 -#define P0_CMD_EN		(1 << 14) -#define BYTE_RDLVL_EN		(1 << 13) -#define CTRL_SHGATE		(1 << 8) +/* RPLL_CON1, CON2 */ +#define RPLL_CON1_VAL	0x00000000 +#define RPLL_CON2_VAL	0x00000080 -#define PHY_CON1_RESET_VAL	0x09210100 -#define CTRL_GATEDURADJ_MASK	(0xf << 20) +/* BPLL_CON1 */ +#define BPLL_CON1_VAL	0x0020f300 -#define PHY_CON2_RESET_VAL	0x00010004 -#define INIT_DESKEW_EN		(1 << 6) -#define RDLVL_GATE_EN		(1 << 24) +/* SPLL_CON1 */ +#define SPLL_CON1_VAL	0x0020f300 -/*ZQ Configurations */ -#define PHY_CON16_RESET_VAL	0x08000304 +/* IPLL_CON1 */ +#define IPLL_CON1_VAL	0x00000080 -#define ZQ_CLK_DIV_EN		(1 << 18) -#define ZQ_MANUAL_STR		(1 << 1) -#define ZQ_DONE			(1 << 0) +/* KPLL_CON1 */ +#define KPLL_CON1_VAL	0x200000 -#define CTRL_RDLVL_GATE_ENABLE	1 -#define CTRL_RDLVL_GATE_DISABLE	1 +/* CLK_SRC_ISP */ +#define CLK_SRC_ISP_VAL		0x33366000 +#define CLK_DIV_ISP0_VAL	0x13131300 +#define CLK_DIV_ISP1_VAL	0xbb110202 -/* Direct Command */ -#define DIRECT_CMD_NOP			0x07000000 -#define DIRECT_CMD_PALL			0x01000000 -#define DIRECT_CMD_ZQINIT		0x0a000000 -#define DIRECT_CMD_CHANNEL_SHIFT	28 -#define DIRECT_CMD_CHIP_SHIFT		20 -/* DMC PHY Control0 register */ -#define PHY_CONTROL0_RESET_VAL	0x0 -#define MEM_TERM_EN	(1 << 31)	/* Termination enable for memory */ -#define PHY_TERM_EN	(1 << 30)	/* Termination enable for PHY */ -#define DMC_CTRL_SHGATE	(1 << 29)	/* Duration of DQS gating signal */ -#define FP_RSYNC	(1 << 3)	/* Force DLL resyncronization */ +/* CLK_FSYS */ +#define CLK_SRC_FSYS0_VAL              0x33033300 +#define CLK_DIV_FSYS0_VAL	       0x0 +#define CLK_DIV_FSYS1_VAL	       0x04f13c4f +#define CLK_DIV_FSYS2_VAL	       0x041d0000 -/* Driver strength for CK, CKE, CS & CA */ -#define IMP_OUTPUT_DRV_40_OHM	0x5 -#define IMP_OUTPUT_DRV_30_OHM	0x7 -#define CA_CK_DRVR_DS_OFFSET	9 -#define CA_CKE_DRVR_DS_OFFSET	6 -#define CA_CS_DRVR_DS_OFFSET	3 -#define CA_ADR_DRVR_DS_OFFSET	0 +/* CLK_SRC_CPU */ +/* 0 = MOUTAPLL,  1 = SCLKMPLL */ +#define MUX_HPM_SEL             1 +#define MUX_CPU_SEL             0 +#define MUX_APLL_SEL            1 -#define PHY_CON42_CTRL_BSTLEN_SHIFT	8 -#define PHY_CON42_CTRL_RDLAT_SHIFT	0 +#define CLK_SRC_CPU_VAL		((MUX_HPM_SEL << 20)    \ +				| (MUX_CPU_SEL << 16)  \ +				| (MUX_APLL_SEL)) + +/* CLK_SRC_CDREX */ +#define CLK_SRC_CDREX_VAL       0x00000011 + +/* CLK_DIV_CDREX */ +#define CLK_DIV_CDREX0_VAL	0x30010100 +#define CLK_DIV_CDREX1_VAL	0x300 + +#define CLK_DIV_CDREX_VAL       0x17010100 + +/* CLK_DIV_CPU0_VAL */ +#define CLK_DIV_CPU0_VAL	0x01440020 + +/* CLK_SRC_TOP */ +#define CLK_SRC_TOP0_VAL	0x12221222 +#define CLK_SRC_TOP1_VAL	0x00100200 +#define CLK_SRC_TOP2_VAL	0x11101000 +#define CLK_SRC_TOP3_VAL	0x11111111 +#define CLK_SRC_TOP4_VAL	0x11110111 +#define CLK_SRC_TOP5_VAL	0x11111100 +#define CLK_SRC_TOP6_VAL	0x11110111 +#define CLK_SRC_TOP7_VAL	0x00022200 + +/* CLK_DIV_TOP */ +#define CLK_DIV_TOP0_VAL	0x23712311 +#define CLK_DIV_TOP1_VAL	0x13100B00 +#define CLK_DIV_TOP2_VAL	0x11101100 + +/* PLL Lock Value Factor */ +#define PLL_LOCK_FACTOR		200 +#define PLL_X_LOCK_FACTOR	3000 + +/* CLK_SRC_PERIC0 */ +#define SPDIF_SEL	1 +#define PWM_SEL		3 +#define UART4_SEL	3 +#define UART3_SEL	3 +#define UART2_SEL	3 +#define UART1_SEL	3 +#define UART0_SEL	3 +/* SRC_CLOCK = SCLK_RPLL */ +#define CLK_SRC_PERIC0_VAL	((SPDIF_SEL << 28)	\ +				| (PWM_SEL << 24)	\ +				| (UART4_SEL << 20)	\ +				| (UART3_SEL << 16)	\ +				| (UART2_SEL << 12)	\ +				| (UART1_SEL << 8)	\ +				| (UART0_SEL << 4)) + +/* CLK_SRC_PERIC1 */ +/* SRC_CLOCK = SCLK_EPLL */ +#define SPI0_SEL		6 +#define SPI1_SEL		6 +#define SPI2_SEL		6 +#define AUDIO0_SEL		6 +#define AUDIO1_SEL		6 +#define AUDIO2_SEL		6 +#define CLK_SRC_PERIC1_VAL	((SPI2_SEL << 28)	\ +				| (SPI1_SEL << 24)	\ +				| (SPI0_SEL << 20)	\ +				| (AUDIO2_SEL << 16)	\ +				| (AUDIO2_SEL << 12)	\ +				| (AUDIO2_SEL << 8)) + +/* CLK_DIV_PERIC0 */ +#define PWM_RATIO	8 +#define UART4_RATIO	9 +#define UART3_RATIO	9 +#define UART2_RATIO	9 +#define UART1_RATIO	9 +#define UART0_RATIO	9 + +#define CLK_DIV_PERIC0_VAL	((PWM_RATIO << 28)	\ +				| (UART4_RATIO << 24)	\ +				| (UART3_RATIO << 20)    \ +				| (UART2_RATIO << 16)    \ +				| (UART1_RATIO << 12)    \ +				| (UART0_RATIO << 8)) +/* CLK_DIV_PERIC1 */ +#define SPI2_RATIO		0x1 +#define SPI1_RATIO		0x1 +#define SPI0_RATIO		0x1 +#define CLK_DIV_PERIC1_VAL	((SPI2_RATIO << 28)	\ +				| (SPI1_RATIO << 24)	\ +				| (SPI0_RATIO << 20)) + +/* CLK_DIV_PERIC2 */ +#define PCM2_RATIO		0x3 +#define PCM1_RATIO		0x3 +#define CLK_DIV_PERIC2_VAL	((PCM2_RATIO << 24) \ +				| (PCM1_RATIO << 16)) + +/* CLK_DIV_PERIC3 */ +#define AUDIO2_RATIO		0x5 +#define AUDIO1_RATIO		0x5 +#define AUDIO0_RATIO		0x5 +#define CLK_DIV_PERIC3_VAL	((AUDIO2_RATIO << 28)	\ +				| (AUDIO1_RATIO << 24)	\ +				| (AUDIO0_RATIO << 20)) + +/* CLK_DIV_PERIC4 */ +#define SPI2_PRE_RATIO		0x2 +#define SPI1_PRE_RATIO		0x2 +#define SPI0_PRE_RATIO		0x2 +#define CLK_DIV_PERIC4_VAL	((SPI2_PRE_RATIO << 24)	\ +				| (SPI1_PRE_RATIO << 16) \ +				| (SPI0_PRE_RATIO << 8)) + +/* CLK_SRC_DISP1_0 */ +#define CLK_SRC_DISP1_0_VAL	0x10666600 +#define CLK_DIV_DISP1_0_VAL	0x01050211 + +#define APLL_FOUT		(1 << 0) +#define KPLL_FOUT		(1 << 0) + +#define CLK_DIV_CPERI1_VAL	0x3f3f0000 +#endif  struct mem_timings; @@ -490,7 +888,7 @@ enum {  };  /* - * Memory variant specific initialization code + * Memory variant specific initialization code for DDR3   *   * @param mem		Memory timings for this memory type.   * @param mem_iv_size	Memory interleaving size is a configurable parameter @@ -503,49 +901,45 @@ enum {  int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,  			int reset); +/* Memory variant specific initialization code for LPDDR3 */ +void lpddr3_mem_ctrl_init(void); +  /*   * Configure ZQ I/O interface   *   * @param mem		Memory timings for this memory type. - * @param phy0_ctrl	Pointer to struct containing PHY0 control reg - * @param phy1_ctrl	Pointer to struct containing PHY1 control reg + * @param phy0_con16	Register address for dmc_phy0->phy_con16 + * @param phy1_con16	Register address for dmc_phy1->phy_con16 + * @param phy0_con17	Register address for dmc_phy0->phy_con17 + * @param phy1_con17	Register address for dmc_phy1->phy_con17   * @return 0 if ok, -1 on error   */ -int dmc_config_zq(struct mem_timings *mem, -		  struct exynos5_phy_control *phy0_ctrl, -		  struct exynos5_phy_control *phy1_ctrl); - +int dmc_config_zq(struct mem_timings *mem, uint32_t *phy0_con16, +			uint32_t *phy1_con16, uint32_t *phy0_con17, +			uint32_t *phy1_con17);  /*   * Send NOP and MRS/EMRS Direct commands   *   * @param mem		Memory timings for this memory type. - * @param dmc		Pointer to struct of DMC registers + * @param directcmd	Register address for dmc_phy->directcmd   */ -void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc); +void dmc_config_mrs(struct mem_timings *mem, uint32_t *directcmd);  /*   * Send PALL Direct commands   *   * @param mem		Memory timings for this memory type. - * @param dmc		Pointer to struct of DMC registers - */ -void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc); - -/* - * Configure the memconfig and membaseconfig registers - * - * @param mem		Memory timings for this memory type. - * @param exynos5_dmc	Pointer to struct of DMC registers + * @param directcmd	Register address for dmc_phy->directcmd   */ -void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc); +void dmc_config_prech(struct mem_timings *mem, uint32_t *directcmd);  /*   * Reset the DLL. This function is common between DDR3 and LPDDR2.   * However, the reset value is different. So we are passing a flag   * ddr_mode to distinguish between LPDDR2 and DDR3.   * - * @param exynos5_dmc	Pointer to struct of DMC registers + * @param phycontrol0	Register address for dmc_phy->phycontrol0   * @param ddr_mode	Type of DDR memory   */ -void update_reset_dll(struct exynos5_dmc *, enum ddr_mode); +void update_reset_dll(uint32_t *phycontrol0, enum ddr_mode);  #endif diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index 74cc7009f..904177a14 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -46,6 +46,42 @@ static void exynos5_uart_config(int peripheral)  	}  } +static void exynos5420_uart_config(int peripheral) +{ +	struct exynos5420_gpio_part1 *gpio1 = +		(struct exynos5420_gpio_part1 *)samsung_get_base_gpio_part1(); +	struct s5p_gpio_bank *bank; +	int i, start, count; + +	switch (peripheral) { +	case PERIPH_ID_UART0: +		bank = &gpio1->a0; +		start = 0; +		count = 4; +		break; +	case PERIPH_ID_UART1: +		bank = &gpio1->a0; +		start = 4; +		count = 4; +		break; +	case PERIPH_ID_UART2: +		bank = &gpio1->a1; +		start = 0; +		count = 4; +		break; +	case PERIPH_ID_UART3: +		bank = &gpio1->a1; +		start = 4; +		count = 2; +		break; +	} + +	for (i = start; i < start + count; i++) { +		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); +		s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); +	} +} +  static int exynos5_mmc_config(int peripheral, int flags)  {  	struct exynos5_gpio_part1 *gpio1 = @@ -101,6 +137,75 @@ static int exynos5_mmc_config(int peripheral, int flags)  	return 0;  } +static int exynos5420_mmc_config(int peripheral, int flags) +{ +	struct exynos5420_gpio_part3 *gpio3 = +		(struct exynos5420_gpio_part3 *)samsung_get_base_gpio_part3(); +	struct s5p_gpio_bank *bank = NULL, *bank_ext = NULL; +	int i, start; + +	switch (peripheral) { +	case PERIPH_ID_SDMMC0: +		bank = &gpio3->c0; +		bank_ext = &gpio3->c3; +		start = 0; +		break; +	case PERIPH_ID_SDMMC1: +		bank = &gpio3->c1; +		bank_ext = &gpio3->d1; +		start = 4; +		break; +	case PERIPH_ID_SDMMC2: +		bank = &gpio3->c2; +		bank_ext = NULL; +		start = 0; +		break; +	default: +		start = 0; +		debug("%s: invalid peripheral %d", __func__, peripheral); +		return -1; +	} + +	if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) { +		debug("SDMMC device %d does not support 8bit mode", +		      peripheral); +		return -1; +	} + +	if (flags & PINMUX_FLAG_8BIT_MODE) { +		for (i = start; i <= (start + 3); i++) { +			s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x2)); +			s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP); +			s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X); +		} +	} + +	for (i = 0; i < 3; i++) { +		/* +		 * MMC0 is intended to be used for eMMC. The +		 * card detect pin is used as a VDDEN signal to +		 * power on the eMMC. The 5420 iROM makes +		 * this same assumption. +		 */ +		if ((peripheral == PERIPH_ID_SDMMC0) && (i == 2)) { +			s5p_gpio_set_value(bank, i, 1); +			s5p_gpio_cfg_pin(bank, i, GPIO_OUTPUT); +		} else { +			s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); +		} +		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); +		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); +	} + +	for (i = 3; i <= 6; i++) { +		s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); +		s5p_gpio_set_pull(bank, i, GPIO_PULL_UP); +		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); +	} + +	return 0; +} +  static void exynos5_sromc_config(int flags)  {  	struct exynos5_gpio_part1 *gpio1 = @@ -216,6 +321,59 @@ static void exynos5_i2c_config(int peripheral, int flags)  	}  } +static void exynos5420_i2c_config(int peripheral) +{ +	struct exynos5420_gpio_part1 *gpio1 = +		(struct exynos5420_gpio_part1 *)samsung_get_base_gpio_part1(); + +	switch (peripheral) { +	case PERIPH_ID_I2C0: +		s5p_gpio_cfg_pin(&gpio1->b3, 0, GPIO_FUNC(0x2)); +		s5p_gpio_cfg_pin(&gpio1->b3, 1, GPIO_FUNC(0x2)); +		break; +	case PERIPH_ID_I2C1: +		s5p_gpio_cfg_pin(&gpio1->b3, 2, GPIO_FUNC(0x2)); +		s5p_gpio_cfg_pin(&gpio1->b3, 3, GPIO_FUNC(0x2)); +		break; +	case PERIPH_ID_I2C2: +		s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3)); +		s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3)); +		break; +	case PERIPH_ID_I2C3: +		s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3)); +		s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3)); +		break; +	case PERIPH_ID_I2C4: +		s5p_gpio_cfg_pin(&gpio1->a2, 0, GPIO_FUNC(0x3)); +		s5p_gpio_cfg_pin(&gpio1->a2, 1, GPIO_FUNC(0x3)); +		break; +	case PERIPH_ID_I2C5: +		s5p_gpio_cfg_pin(&gpio1->a2, 2, GPIO_FUNC(0x3)); +		s5p_gpio_cfg_pin(&gpio1->a2, 3, GPIO_FUNC(0x3)); +		break; +	case PERIPH_ID_I2C6: +		s5p_gpio_cfg_pin(&gpio1->b1, 3, GPIO_FUNC(0x4)); +		s5p_gpio_cfg_pin(&gpio1->b1, 4, GPIO_FUNC(0x4)); +		break; +	case PERIPH_ID_I2C7: +		s5p_gpio_cfg_pin(&gpio1->b2, 2, GPIO_FUNC(0x3)); +		s5p_gpio_cfg_pin(&gpio1->b2, 3, GPIO_FUNC(0x3)); +		break; +	case PERIPH_ID_I2C8: +		s5p_gpio_cfg_pin(&gpio1->b3, 4, GPIO_FUNC(0x2)); +		s5p_gpio_cfg_pin(&gpio1->b3, 5, GPIO_FUNC(0x2)); +		break; +	case PERIPH_ID_I2C9: +		s5p_gpio_cfg_pin(&gpio1->b3, 6, GPIO_FUNC(0x2)); +		s5p_gpio_cfg_pin(&gpio1->b3, 7, GPIO_FUNC(0x2)); +		break; +	case PERIPH_ID_I2C10: +		s5p_gpio_cfg_pin(&gpio1->b4, 0, GPIO_FUNC(0x2)); +		s5p_gpio_cfg_pin(&gpio1->b4, 1, GPIO_FUNC(0x2)); +		break; +	} +} +  static void exynos5_i2s_config(int peripheral)  {  	int i; @@ -279,6 +437,58 @@ void exynos5_spi_config(int peripheral)  	}  } +void exynos5420_spi_config(int peripheral) +{ +	int cfg, pin, i; +	struct s5p_gpio_bank *bank = NULL; +	struct exynos5420_gpio_part1 *gpio1 = +		(struct exynos5420_gpio_part1 *)samsung_get_base_gpio_part1(); +	struct exynos5420_gpio_part4 *gpio4 = +		(struct exynos5420_gpio_part4 *)samsung_get_base_gpio_part4(); + +	switch (peripheral) { +	case PERIPH_ID_SPI0: +		bank = &gpio1->a2; +		cfg = GPIO_FUNC(0x2); +		pin = 0; +		break; +	case PERIPH_ID_SPI1: +		bank = &gpio1->a2; +		cfg = GPIO_FUNC(0x2); +		pin = 4; +		break; +	case PERIPH_ID_SPI2: +		bank = &gpio1->b1; +		cfg = GPIO_FUNC(0x5); +		pin = 1; +		break; +	case PERIPH_ID_SPI3: +		bank = &gpio4->f1; +		cfg = GPIO_FUNC(0x2); +		pin = 0; +		break; +	case PERIPH_ID_SPI4: +		cfg = 0; +		pin = 0; +		break; +	default: +		cfg = 0; +		pin = 0; +		debug("%s: invalid peripheral %d", __func__, peripheral); +		return; +	} + +	if (peripheral != PERIPH_ID_SPI4) { +		for (i = pin; i < pin + 4; i++) +			s5p_gpio_cfg_pin(bank, i, cfg); +	} else { +		for (i = 0; i < 2; i++) { +			s5p_gpio_cfg_pin(&gpio4->f0, i + 2, GPIO_FUNC(0x4)); +			s5p_gpio_cfg_pin(&gpio4->e0, i + 4, GPIO_FUNC(0x4)); +		} +	} +} +  static int exynos5_pinmux_config(int peripheral, int flags)  {  	switch (peripheral) { @@ -325,6 +535,48 @@ static int exynos5_pinmux_config(int peripheral, int flags)  	return 0;  } +static int exynos5420_pinmux_config(int peripheral, int flags) +{ +	switch (peripheral) { +	case PERIPH_ID_UART0: +	case PERIPH_ID_UART1: +	case PERIPH_ID_UART2: +	case PERIPH_ID_UART3: +		exynos5420_uart_config(peripheral); +		break; +	case PERIPH_ID_SDMMC0: +	case PERIPH_ID_SDMMC1: +	case PERIPH_ID_SDMMC2: +	case PERIPH_ID_SDMMC3: +		return exynos5420_mmc_config(peripheral, flags); +	case PERIPH_ID_SPI0: +	case PERIPH_ID_SPI1: +	case PERIPH_ID_SPI2: +	case PERIPH_ID_SPI3: +	case PERIPH_ID_SPI4: +		exynos5420_spi_config(peripheral); +		break; +	case PERIPH_ID_I2C0: +	case PERIPH_ID_I2C1: +	case PERIPH_ID_I2C2: +	case PERIPH_ID_I2C3: +	case PERIPH_ID_I2C4: +	case PERIPH_ID_I2C5: +	case PERIPH_ID_I2C6: +	case PERIPH_ID_I2C7: +	case PERIPH_ID_I2C8: +	case PERIPH_ID_I2C9: +	case PERIPH_ID_I2C10: +		exynos5420_i2c_config(peripheral); +		break; +	default: +		debug("%s: invalid peripheral %d", __func__, peripheral); +		return -1; +	} + +	return 0; +} +  static void exynos4_i2c_config(int peripheral, int flags)  {  	struct exynos4_gpio_part1 *gpio1 = @@ -475,13 +727,17 @@ static int exynos4_pinmux_config(int peripheral, int flags)  int exynos_pinmux_config(int peripheral, int flags)  {  	if (cpu_is_exynos5()) { -		return exynos5_pinmux_config(peripheral, flags); +		if (proid_is_exynos5420()) +			return exynos5420_pinmux_config(peripheral, flags); +		else if (proid_is_exynos5250()) +			return exynos5_pinmux_config(peripheral, flags);  	} else if (cpu_is_exynos4()) {  		return exynos4_pinmux_config(peripheral, flags);  	} else {  		debug("pinmux functionality not supported\n"); -		return -1;  	} + +	return -1;  }  #ifdef CONFIG_OF_CONTROL diff --git a/arch/arm/dts/exynos5.dtsi b/arch/arm/dts/exynos5.dtsi new file mode 100644 index 000000000..f8c87411b --- /dev/null +++ b/arch/arm/dts/exynos5.dtsi @@ -0,0 +1,198 @@ +/* + * Copyright (c) 2013 The Chromium OS Authors + * SAMSUNG EXYNOS5 SoC device tree source + * + * SPDX-License-Identifier:	GPL-2.0+ + */ + +/include/ "skeleton.dtsi" + +/ { +	compatible = "samsung,exynos5"; + +	sromc@12250000 { +		compatible = "samsung,exynos-sromc"; +		reg = <0x12250000 0x20>; +		#address-cells = <1>; +		#size-cells = <0>; +	}; + +	i2c@12c60000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,s3c2440-i2c"; +		reg = <0x12C60000 0x100>; +		interrupts = <0 56 0>; +	}; + +	i2c@12c70000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,s3c2440-i2c"; +		reg = <0x12C70000 0x100>; +		interrupts = <0 57 0>; +	}; + +	i2c@12c80000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,s3c2440-i2c"; +		reg = <0x12C80000 0x100>; +		interrupts = <0 58 0>; +	}; + +	i2c@12c90000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,s3c2440-i2c"; +		reg = <0x12C90000 0x100>; +		interrupts = <0 59 0>; +	}; + +	spi@12d20000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos-spi"; +		reg = <0x12d20000 0x30>; +		interrupts = <0 68 0>; +	}; + +	spi@12d30000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos-spi"; +		reg = <0x12d30000 0x30>; +		interrupts = <0 69 0>; +	}; + +	spi@12d40000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos-spi"; +		reg = <0x12d40000 0x30>; +		clock-frequency = <50000000>; +		interrupts = <0 70 0>; +        }; + +	spi@131a0000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos-spi"; +		reg = <0x131a0000 0x30>; +		interrupts = <0 129 0>; +	}; + +	spi@131b0000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos-spi"; +		reg = <0x131b0000 0x30>; +		interrupts = <0 130 0>; +	}; + +	ehci@12110000 { +		compatible = "samsung,exynos-ehci"; +		reg = <0x12110000 0x100>; +		#address-cells = <1>; +		#size-cells = <1>; + +		phy { +			compatible = "samsung,exynos-usb-phy"; +			reg = <0x12130000 0x100>; +		}; +	}; + +	tmu@10060000 { +		compatible = "samsung,exynos-tmu"; +		reg = <0x10060000 0x10000>; +	}; + +	fimd@14400000 { +		compatible = "samsung,exynos-fimd"; +		reg = <0x14400000 0x10000>; +		#address-cells = <1>; +		#size-cells = <1>; +	}; + +	dp@145b0000 { +		compatible = "samsung,exynos5-dp"; +		reg = <0x145b0000 0x1000>; +		#address-cells = <1>; +		#size-cells = <1>; +	}; + +	xhci0: xhci@12000000 { +		compatible = "samsung,exynos5250-xhci"; +		reg = <0x12000000 0x10000>; +		#address-cells = <1>; +		#size-cells = <1>; + +		phy { +			compatible = "samsung,exynos5250-usb3-phy"; +			reg = <0x12100000 0x100>; +		}; +	}; + +	mmc@12200000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos5250-dwmmc"; +		reg = <0x12200000 0x1000>; +		interrupts = <0 75 0>; +	}; + +	mmc@12210000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos5250-dwmmc"; +		reg = <0x12210000 0x1000>; +		interrupts = <0 76 0>; +	}; + +	mmc@12220000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos5250-dwmmc"; +		reg = <0x12220000 0x1000>; +		interrupts = <0 77 0>; +	}; + +	mmc@12230000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos5250-dwmmc"; +		reg = <0x12230000 0x1000>; +		interrupts = <0 78 0>; +	}; + +	serial@12C00000 { +		compatible = "samsung,exynos4210-uart"; +		reg = <0x12C00000 0x100>; +		interrupts = <0 51 0>; +		id = <0>; +	}; + +	serial@12C10000 { +		compatible = "samsung,exynos4210-uart"; +		reg = <0x12C10000 0x100>; +		interrupts = <0 52 0>; +		id = <1>; +	}; + +	serial@12C20000 { +		compatible = "samsung,exynos4210-uart"; +		reg = <0x12C20000 0x100>; +		interrupts = <0 53 0>; +		id = <2>; +	}; + +	serial@12C30000 { +		compatible = "samsung,exynos4210-uart"; +		reg = <0x12C30000 0x100>; +		interrupts = <0 54 0>; +		id = <3>; +	}; + +	gpio: gpio { +	}; +}; diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi index 31880eb23..0c644e7ca 100644 --- a/arch/arm/dts/exynos5250.dtsi +++ b/arch/arm/dts/exynos5250.dtsi @@ -1,66 +1,13 @@  /* + * (C) Copyright 2012 SAMSUNG Electronics   * SAMSUNG EXYNOS5250 SoC device tree source   * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - *		http://www.samsung.com - * - * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file. - * EXYNOS5250 based board files can include this file and provide - * values for board specfic bindings. - * - * Note: This file does not include device nodes for all the controllers in - * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases, - * additional nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + * SPDX-License-Identifier:	GPL-2.0+ + */ -/include/ "skeleton.dtsi" +/include/ "exynos5.dtsi"  / { -	compatible = "samsung,exynos5250"; - -	sromc@12250000 { -		compatible = "samsung,exynos-sromc"; -		reg = <0x12250000 0x20>; -		#address-cells = <1>; -		#size-cells = <0>; -	}; - -	i2c@12c60000 { -		#address-cells = <1>; -		#size-cells = <0>; -		compatible = "samsung,s3c2440-i2c"; -		reg = <0x12C60000 0x100>; -		interrupts = <0 56 0>; -	}; - -	i2c@12c70000 { -		#address-cells = <1>; -		#size-cells = <0>; -		compatible = "samsung,s3c2440-i2c"; -		reg = <0x12C70000 0x100>; -		interrupts = <0 57 0>; -	}; - -	i2c@12c80000 { -		#address-cells = <1>; -		#size-cells = <0>; -		compatible = "samsung,s3c2440-i2c"; -		reg = <0x12C80000 0x100>; -		interrupts = <0 58 0>; -	}; - -	i2c@12c90000 { -		#address-cells = <1>; -		#size-cells = <0>; -		compatible = "samsung,s3c2440-i2c"; -		reg = <0x12C90000 0x100>; -		interrupts = <0 59 0>; -	}; -  	i2c@12ca0000 {  		#address-cells = <1>;  		#size-cells = <0>; @@ -117,46 +64,6 @@  		samsung,i2s-id = <1>;  	}; -	spi@12d20000 { -		#address-cells = <1>; -		#size-cells = <0>; -		compatible = "samsung,exynos-spi"; -		reg = <0x12d20000 0x30>; -		interrupts = <0 68 0>; -	}; - -	spi@12d30000 { -		#address-cells = <1>; -		#size-cells = <0>; -		compatible = "samsung,exynos-spi"; -		reg = <0x12d30000 0x30>; -		interrupts = <0 69 0>; -	}; - -	spi@12d40000 { -		#address-cells = <1>; -		#size-cells = <0>; -		compatible = "samsung,exynos-spi"; -		reg = <0x12d40000 0x30>; -		clock-frequency = <50000000>; -		interrupts = <0 70 0>; -	}; - -	spi@131a0000 { -		#address-cells = <1>; -		#size-cells = <0>; -		compatible = "samsung,exynos-spi"; -		reg = <0x131a0000 0x30>; -		interrupts = <0 129 0>; -	}; - -	spi@131b0000 { -		#address-cells = <1>; -		#size-cells = <0>; -		compatible = "samsung,exynos-spi"; -		reg = <0x131b0000 0x30>; -		interrupts = <0 130 0>; -	};  	xhci@12000000 {  		compatible = "samsung,exynos5250-xhci"; @@ -170,97 +77,4 @@  		};  	}; -	ehci@12110000 { -		compatible = "samsung,exynos-ehci"; -		reg = <0x12110000 0x100>; -		#address-cells = <1>; -		#size-cells = <1>; - -		phy { -			compatible = "samsung,exynos-usb-phy"; -			reg = <0x12130000 0x100>; -		}; -	}; - -	tmu@10060000 { -		compatible = "samsung,exynos-tmu"; -		reg = <0x10060000 0x10000>; -	}; - -	fimd@14400000 { -		compatible = "samsung,exynos-fimd"; -		reg = <0x14400000 0x10000>; -		#address-cells = <1>; -		#size-cells = <1>; -	}; - -	dp@145b0000 { -		compatible = "samsung,exynos5-dp"; -		reg = <0x145b0000 0x1000>; -		#address-cells = <1>; -		#size-cells = <1>; -	}; - -	mmc@12200000 { -		#address-cells = <1>; -		#size-cells = <0>; -		compatible = "samsung,exynos5250-dwmmc"; -		reg = <0x12200000 0x1000>; -		interrupts = <0 75 0>; -	}; - -	mmc@12210000 { -		#address-cells = <1>; -		#size-cells = <0>; -		compatible = "samsung,exynos5250-dwmmc"; -		reg = <0x12210000 0x1000>; -		interrupts = <0 76 0>; -	}; - -	mmc@12220000 { -		#address-cells = <1>; -		#size-cells = <0>; -		compatible = "samsung,exynos5250-dwmmc"; -		reg = <0x12220000 0x1000>; -		interrupts = <0 77 0>; -	}; - -	mmc@12230000 { -		#address-cells = <1>; -		#size-cells = <0>; -		compatible = "samsung,exynos5250-dwmmc"; -		reg = <0x12230000 0x1000>; -		interrupts = <0 78 0>; -	}; - -	serial@12C00000 { -		compatible = "samsung,exynos4210-uart"; -		reg = <0x12C00000 0x100>; -		interrupts = <0 51 0>; -		id = <0>; -	}; - -	serial@12C10000 { -		compatible = "samsung,exynos4210-uart"; -		reg = <0x12C10000 0x100>; -		interrupts = <0 52 0>; -		id = <1>; -	}; - -	serial@12C20000 { -		compatible = "samsung,exynos4210-uart"; -		reg = <0x12C20000 0x100>; -		interrupts = <0 53 0>; -		id = <2>; -	}; - -	serial@12C30000 { -		compatible = "samsung,exynos4210-uart"; -		reg = <0x12C30000 0x100>; -		interrupts = <0 54 0>; -		id = <3>; -	}; - -	gpio: gpio { -	};  }; diff --git a/arch/arm/dts/exynos5420.dtsi b/arch/arm/dts/exynos5420.dtsi new file mode 100644 index 000000000..02ead61a4 --- /dev/null +++ b/arch/arm/dts/exynos5420.dtsi @@ -0,0 +1,70 @@ +/* + * (C) Copyright 2013 SAMSUNG Electronics + * SAMSUNG EXYNOS5420 SoC device tree source + * + * SPDX-License-Identifier:	GPL-2.0+ + */ + +/include/ "exynos5.dtsi" + +/ { +	config { +		machine-arch-id = <4151>; +	}; + +	i2c@12ca0000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos5-hsi2c"; +		reg = <0x12CA0000 0x100>; +		interrupts = <0 60 0>; +	}; + +	i2c@12cb0000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos5-hsi2c"; +		reg = <0x12CB0000 0x100>; +		interrupts = <0 61 0>; +	}; + +	i2c@12cc0000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos5-hsi2c"; +		reg = <0x12CC0000 0x100>; +		interrupts = <0 62 0>; +	}; + +	i2c@12cd0000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos5-hsi2c"; +		reg = <0x12CD0000 0x100>; +		interrupts = <0 63 0>; +	}; + +	i2c@12e00000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos5-hsi2c"; +		reg = <0x12E00000 0x100>; +		interrupts = <0 87 0>; +	}; + +	i2c@12e10000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos5-hsi2c"; +		reg = <0x12E10000 0x100>; +		interrupts = <0 88 0>; +	}; + +	i2c@12e20000 { +		#address-cells = <1>; +		#size-cells = <0>; +		compatible = "samsung,exynos5-hsi2c"; +		reg = <0x12E20000 0x100>; +		interrupts = <0 203 0>; +	}; +}; diff --git a/arch/arm/include/asm/arch-exynos/board.h b/arch/arm/include/asm/arch-exynos/board.h new file mode 100644 index 000000000..243fb12b7 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/board.h @@ -0,0 +1,17 @@ +/* + * (C) Copyright 2013 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * SPDX-License-Identifier:	GPL-2.0+ + */ + +#ifndef _EXYNOS_BOARD_H +#define _EXYNOS_BOARD_H + +/* + * Exynos baord specific changes for + * board_init + */ +int exynos_init(void); + +#endif	/* EXYNOS_BOARD_H */ diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h index 1d6fa9370..cdeef324c 100644 --- a/arch/arm/include/asm/arch-exynos/clk.h +++ b/arch/arm/include/asm/arch-exynos/clk.h @@ -14,6 +14,7 @@  #define HPLL	3  #define VPLL	4  #define BPLL	5 +#define RPLL	6  enum pll_src_bit {  	EXYNOS_SRC_MPLL = 6, diff --git a/arch/arm/include/asm/arch-exynos/clock.h b/arch/arm/include/asm/arch-exynos/clock.h index cf26eeffc..8259b92b8 100644 --- a/arch/arm/include/asm/arch-exynos/clock.h +++ b/arch/arm/include/asm/arch-exynos/clock.h @@ -858,6 +858,500 @@ struct exynos5_clock {  	unsigned char	res123[0xf5d8];  }; +struct exynos5420_clock { +	unsigned int	apll_lock;			/* 0x10010000 */ +	unsigned char	res1[0xfc]; +	unsigned int	apll_con0; +	unsigned int	apll_con1; +	unsigned char	res2[0xf8]; +	unsigned int	src_cpu; +	unsigned char	res3[0x1fc]; +	unsigned int	mux_stat_cpu; +	unsigned char	res4[0xfc]; +	unsigned int	div_cpu0;		/* 0x10010500 */ +	unsigned int	div_cpu1; +	unsigned char	res5[0xf8]; +	unsigned int	div_stat_cpu0; +	unsigned int	div_stat_cpu1; +	unsigned char	res6[0xf8]; +	unsigned int	gate_bus_cpu; +	unsigned char	res7[0xfc]; +	unsigned int	gate_sclk_cpu; +	unsigned char	res8[0x1fc]; +	unsigned int	clkout_cmu_cpu;		/* 0x10010a00 */ +	unsigned int	clkout_cmu_cpu_div_stat; +	unsigned char	res9[0x5f8]; +	unsigned int	armclk_stopctrl; +	unsigned char	res10[0x4]; +	unsigned int	arm_ema_ctrl; +	unsigned int	arm_ema_status; +	unsigned char	res11[0x10]; +	unsigned int	pwr_ctrl; +	unsigned int	pwr_ctrl2; +	unsigned char	res12[0xd8]; +	unsigned int	apll_con0_l8;		/* 0x1001100 */ +	unsigned int	apll_con0_l7; +	unsigned int	apll_con0_l6; +	unsigned int	apll_con0_l5; +	unsigned int	apll_con0_l4; +	unsigned int	apll_con0_l3; +	unsigned int	apll_con0_l2; +	unsigned int	apll_con0_l1; +	unsigned int	iem_control; +	unsigned char	res13[0xdc]; +	unsigned int	apll_con1_l8;		/* 0x10011200 */ +	unsigned int	apll_con1_l7; +	unsigned int	apll_con1_l6; +	unsigned int	apll_con1_l5; +	unsigned int	apll_con1_l4; +	unsigned int	apll_con1_l3; +	unsigned int	apll_con1_l2; +	unsigned int	apll_con1_l1; +	unsigned char	res14[0xe0]; +	unsigned int	clkdiv_iem_l8; +	unsigned int	clkdiv_iem_l7;		/* 0x10011304 */ +	unsigned int	clkdiv_iem_l6; +	unsigned int	clkdiv_iem_l5; +	unsigned int	clkdiv_iem_l4; +	unsigned int	clkdiv_iem_l3; +	unsigned int	clkdiv_iem_l2; +	unsigned int	clkdiv_iem_l1; +	unsigned char	res15[0xe0]; +	unsigned int	l2_status; +	unsigned char	res16[0x0c]; +	unsigned int	cpu_status;		/* 0x10011410 */ +	unsigned char	res17[0x0c]; +	unsigned int	ptm_status; +	unsigned char	res18[0xbdc]; +	unsigned int	cmu_cpu_spare0; +	unsigned int	cmu_cpu_spare1; +	unsigned int	cmu_cpu_spare2; +	unsigned int	cmu_cpu_spare3; +	unsigned int	cmu_cpu_spare4; +	unsigned char	res19[0x1fdc]; +	unsigned int	cmu_cpu_version; +	unsigned char	res20[0x20c]; +	unsigned int	src_cperi0;		/* 0x10014200 */ +	unsigned int	src_cperi1; +	unsigned char	res21[0xf8]; +	unsigned int	src_mask_cperi; +	unsigned char	res22[0x100]; +	unsigned int	mux_stat_cperi1; +	unsigned char	res23[0xfc]; +	unsigned int	div_cperi1; +	unsigned char	res24[0xfc]; +	unsigned int	div_stat_cperi1; +	unsigned char	res25[0xf8]; +	unsigned int	gate_bus_cperi0;	/* 0x10014700 */ +	unsigned int	gate_bus_cperi1; +	unsigned char	res26[0xf8]; +	unsigned int	gate_sclk_cperi; +	unsigned char	res27[0xfc]; +	unsigned int	gate_ip_cperi; +	unsigned char	res28[0xfc]; +	unsigned int	clkout_cmu_cperi; +	unsigned int	clkout_cmu_cperi_div_stat; +	unsigned char	res29[0x5f8]; +	unsigned int	dcgidx_map0;		/* 0x10015000 */ +	unsigned int	dcgidx_map1; +	unsigned int	dcgidx_map2; +	unsigned char	res30[0x14]; +	unsigned int	dcgperf_map0; +	unsigned int	dcgperf_map1; +	unsigned char	res31[0x18]; +	unsigned int	dvcidx_map; +	unsigned char	res32[0x1c]; +	unsigned int	freq_cpu; +	unsigned int	freq_dpm; +	unsigned char	res33[0x18]; +	unsigned int	dvsemclk_en;		/* 0x10015080 */ +	unsigned int	maxperf; +	unsigned char	res34[0x2e78]; +	unsigned int	cmu_cperi_spare0; +	unsigned int	cmu_cperi_spare1; +	unsigned int	cmu_cperi_spare2; +	unsigned int	cmu_cperi_spare3; +	unsigned int	cmu_cperi_spare4; +	unsigned int	cmu_cperi_spare5; +	unsigned int	cmu_cperi_spare6; +	unsigned int	cmu_cperi_spare7; +	unsigned int	cmu_cperi_spare8; +	unsigned char	res35[0xcc]; +	unsigned int	cmu_cperi_version;		/* 0x10017ff0 */ +	unsigned char	res36[0x50c]; +	unsigned int	div_g2d; +	unsigned char	res37[0xfc]; +	unsigned int	div_stat_g2d; +	unsigned char	res38[0xfc]; +	unsigned int	gate_bus_g2d; +	unsigned char	res39[0xfc]; +	unsigned int	gate_ip_g2d; +	unsigned char	res40[0x1fc]; +	unsigned int	clkout_cmu_g2d; +	unsigned int	clkout_cmu_g2d_div_stat;	/* 0x10018a04 */ +	unsigned char	res41[0xf8]; +	unsigned int	cmu_g2d_spare0; +	unsigned int	cmu_g2d_spare1; +	unsigned int	cmu_g2d_spare2; +	unsigned int	cmu_g2d_spare3; +	unsigned int	cmu_g2d_spare4; +	unsigned char	res42[0x34dc]; +	unsigned int	cmu_g2d_version; +	unsigned char	res43[0x30c]; +	unsigned int	div_cmu_isp0; +	unsigned int	div_cmu_isp1; +	unsigned int	div_isp2;		/* 0x1001c308 */ +	unsigned char	res44[0xf4]; +	unsigned int	div_stat_cmu_isp0; +	unsigned int	div_stat_cmu_isp1; +	unsigned int	div_stat_isp2; +	unsigned char	res45[0x2f4]; +	unsigned int	gate_bus_isp0; +	unsigned int	gate_bus_isp1; +	unsigned int	gate_bus_isp2; +	unsigned int	gate_bus_isp3; +	unsigned char	res46[0xf0]; +	unsigned int	gate_ip_isp0; +	unsigned int	gate_ip_isp1; +	unsigned char	res47[0xf8]; +	unsigned int	gate_sclk_isp; +	unsigned char	res48[0x0c]; +	unsigned int	mcuisp_pwr_ctrl;		/* 0x1001c910 */ +	unsigned char	res49[0x0ec]; +	unsigned int	clkout_cmu_isp; +	unsigned int	clkout_cmu_isp_div_stat; +	unsigned char	res50[0xf8]; +	unsigned int	cmu_isp_spare0; +	unsigned int	cmu_isp_spare1; +	unsigned int	cmu_isp_spare2; +	unsigned int	cmu_isp_spare3; +	unsigned char	res51[0x34e0]; +	unsigned int	cmu_isp_version; +	unsigned char	res52[0x2c]; +	unsigned int	cpll_lock;			/* 10020020 */ +	unsigned char	res53[0xc]; +	unsigned int	dpll_lock; +	unsigned char	res54[0xc]; +	unsigned int	epll_lock; +	unsigned char	res55[0xc]; +	unsigned int	rpll_lock; +	unsigned char	res56[0xc]; +	unsigned int	ipll_lock; +	unsigned char	res57[0xc]; +	unsigned int	spll_lock; +	unsigned char	res58[0xc]; +	unsigned int	vpll_lock; +	unsigned char	res59[0xc]; +	unsigned int	mpll_lock; +	unsigned char	res60[0x8c]; +	unsigned int	cpll_con0;			/* 10020120 */ +	unsigned int	cpll_con1; +	unsigned int	dpll_con0; +	unsigned int	dpll_con1; +	unsigned int	epll_con0; +	unsigned int	epll_con1; +	unsigned int	epll_con2; +	unsigned char	res601[0x4]; +	unsigned int	rpll_con0; +	unsigned int	rpll_con1; +	unsigned int	rpll_con2; +	unsigned char	res602[0x4]; +	unsigned int	ipll_con0; +	unsigned int	ipll_con1; +	unsigned char	res61[0x8]; +	unsigned int	spll_con0; +	unsigned int	spll_con1; +	unsigned char	res62[0x8]; +	unsigned int	vpll_con0; +	unsigned int	vpll_con1; +	unsigned char	res63[0x8]; +	unsigned int	mpll_con0; +	unsigned int	mpll_con1; +	unsigned char	res64[0x78]; +	unsigned int	src_top0;		/* 0x10020200 */ +	unsigned int	src_top1; +	unsigned int	src_top2; +	unsigned int	src_top3; +	unsigned int	src_top4; +	unsigned int	src_top5; +	unsigned int	src_top6; +	unsigned int	src_top7; +	unsigned char	res65[0xc]; +	unsigned int	src_disp10;		/* 0x1002022c */ +	unsigned char	res66[0x10]; +	unsigned int	src_mau; +	unsigned int	src_fsys; +	unsigned char	res67[0x8]; +	unsigned int	src_peric0; +	unsigned int	src_peric1; +	unsigned char	res68[0x18]; +	unsigned int	src_isp; +	unsigned char	res69[0x0c]; +	unsigned int	src_top10; +	unsigned int	src_top11; +	unsigned int	src_top12; +	unsigned char	res70[0x74]; +	unsigned int	src_mask_top0; +	unsigned int	src_mask_top1; +	unsigned int	src_mask_top2; +	unsigned char	res71[0x10]; +	unsigned int	src_mask_top7; +	unsigned char	res72[0xc]; +	unsigned int	src_mask_disp10;	/* 0x1002032c */ +	unsigned char	res73[0x4]; +	unsigned int	src_mask_mau; +	unsigned char	res74[0x8]; +	unsigned int	src_mask_fsys; +	unsigned char	res75[0xc]; +	unsigned int	src_mask_peric0; +	unsigned int	src_mask_peric1; +	unsigned char	res76[0x18]; +	unsigned int	src_mask_isp; +	unsigned char	res77[0x8c]; +	unsigned int	mux_stat_top0;		/* 0x10020400 */ +	unsigned int	mux_stat_top1; +	unsigned int	mux_stat_top2; +	unsigned int	mux_stat_top3; +	unsigned int	mux_stat_top4; +	unsigned int	mux_stat_top5; +	unsigned int	mux_stat_top6; +	unsigned int	mux_stat_top7; +	unsigned char	res78[0x60]; +	unsigned int	mux_stat_top10; +	unsigned int	mux_stat_top11; +	unsigned int	mux_stat_top12; +	unsigned char	res79[0x74]; +	unsigned int	div_top0;		/* 0x10020500 */ +	unsigned int	div_top1; +	unsigned int	div_top2; +	unsigned char	res80[0x20]; +	unsigned int	div_disp10; +	unsigned char	res81[0x14]; +	unsigned int	div_mau; +	unsigned int	div_fsys0; +	unsigned int	div_fsys1; +	unsigned int	div_fsys2; +	unsigned char	res82[0x4]; +	unsigned int	div_peric0; +	unsigned int	div_peric1; +	unsigned int	div_peric2; +	unsigned int	div_peric3; +	unsigned int	div_peric4;		/* 0x10020568 */ +	unsigned char	res83[0x14]; +	unsigned int	div_isp0; +	unsigned int	div_isp1; +	unsigned char	res84[0x8]; +	unsigned int	clkdiv2_ratio; +	unsigned char	res850[0xc]; +	unsigned int	clkdiv4_ratio; +	unsigned char	res85[0x5c]; +	unsigned int	div_stat_top0; +	unsigned int	div_stat_top1; +	unsigned int	div_stat_top2; +	unsigned char	res86[0x20]; +	unsigned int	div_stat_disp10; +	unsigned char	res87[0x14]; +	unsigned int	div_stat_mau;		/* 0x10020644 */ +	unsigned int	div_stat_fsys0; +	unsigned int	div_stat_fsys1; +	unsigned int	div_stat_fsys2; +	unsigned char	res88[0x4]; +	unsigned int	div_stat_peric0; +	unsigned int	div_stat_peric1; +	unsigned int	div_stat_peric2; +	unsigned int	div_stat_peric3; +	unsigned int	div_stat_peric4; +	unsigned char	res89[0x14]; +	unsigned int	div_stat_isp0; +	unsigned int	div_stat_isp1; +	unsigned char	res90[0x8]; +	unsigned int	clkdiv2_stat0; +	unsigned char	res91[0xc]; +	unsigned int	clkdiv4_stat; +	unsigned char	res92[0x5c]; +	unsigned int	gate_bus_top;		/* 0x10020700 */ +	unsigned char	res93[0xc]; +	unsigned int	gate_bus_gscl0; +	unsigned char	res94[0xc]; +	unsigned int	gate_bus_gscl1; +	unsigned char	res95[0x4]; +	unsigned int	gate_bus_disp1; +	unsigned char	res96[0x4]; +	unsigned int	gate_bus_wcore; +	unsigned int	gate_bus_mfc; +	unsigned int	gate_bus_g3d; +	unsigned int	gate_bus_gen; +	unsigned int	gate_bus_fsys0; +	unsigned int	gate_bus_fsys1; +	unsigned int	gate_bus_fsys2; +	unsigned int	gate_bus_mscl; +	unsigned int	gate_bus_peric; +	unsigned int	gate_bus_peric1; +	unsigned char	res97[0x8]; +	unsigned int	gate_bus_peris0; +	unsigned int	gate_bus_peris1;	/* 0x10020764 */ +	unsigned char	res98[0x8]; +	unsigned int	gate_bus_noc; +	unsigned char	res99[0xac]; +	unsigned int	gate_top_sclk_gscl; +	unsigned char	res1000[0x4]; +	unsigned int	gate_top_sclk_disp1; +	unsigned char	res100[0x10]; +	unsigned int	gate_top_sclk_mau; +	unsigned int	gate_top_sclk_fsys; +	unsigned char	res101[0xc]; +	unsigned int	gate_top_sclk_peric; +	unsigned char	res102[0xc]; +	unsigned int	gate_top_sclk_cperi; +	unsigned char	res103[0xc]; +	unsigned int	gate_top_sclk_isp; +	unsigned char	res104[0x9c]; +	unsigned int	gate_ip_gscl0; +	unsigned char	res105[0xc]; +	unsigned int	gate_ip_gscl1; +	unsigned char	res106[0x4]; +	unsigned int	gate_ip_disp1; +	unsigned int	gate_ip_mfc; +	unsigned int	gate_ip_g3d; +	unsigned int	gate_ip_gen;		/* 0x10020934 */ +	unsigned char	res107[0xc]; +	unsigned int	gate_ip_fsys; +	unsigned char	res108[0x8]; +	unsigned int	gate_ip_peric; +	unsigned char	res109[0xc]; +	unsigned int	gate_ip_peris; +	unsigned char	res110[0xc]; +	unsigned int	gate_ip_mscl; +	unsigned char	res111[0xc]; +	unsigned int	gate_ip_block; +	unsigned char	res112[0xc]; +	unsigned int	bypass; +	unsigned char	res113[0x6c]; +	unsigned int	clkout_cmu_top; +	unsigned int	clkout_cmu_top_div_stat; +	unsigned char	res114[0xf8]; +	unsigned int	clkout_top_spare0; +	unsigned int	clkout_top_spare1; +	unsigned int	clkout_top_spare2; +	unsigned int	clkout_top_spare3; +	unsigned char	res115[0x34e0]; +	unsigned int	clkout_top_version; +	unsigned char	res116[0xc01c]; +	unsigned int	bpll_lock;			/* 0x10030010 */ +	unsigned char	res117[0xfc]; +	unsigned int	bpll_con0; +	unsigned int	bpll_con1; +	unsigned char	res118[0xe8]; +	unsigned int	src_cdrex; +	unsigned char	res119[0x1fc]; +	unsigned int	mux_stat_cdrex; +	unsigned char	res120[0xfc]; +	unsigned int	div_cdrex0; +	unsigned int	div_cdrex1; +	unsigned char	res121[0xf8]; +	unsigned int	div_stat_cdrex; +	unsigned char	res1211[0xfc]; +	unsigned int	gate_bus_cdrex; +	unsigned int	gate_bus_cdrex1; +	unsigned char	res122[0x1f8]; +	unsigned int	gate_ip_cdrex; +	unsigned char	res123[0x10]; +	unsigned int	dmc_freq_ctrl;		/* 0x10030914 */ +	unsigned char	res124[0x4]; +	unsigned int	pause; +	unsigned int	ddrphy_lock_ctrl; +	unsigned char	res125[0xdc]; +	unsigned int	clkout_cmu_cdrex; +	unsigned int	clkout_cmu_cdrex_div_stat; +	unsigned char	res126[0x8]; +	unsigned int	lpddr3phy_ctrl; +	unsigned int	lpddr3phy_con0; +	unsigned int	lpddr3phy_con1; +	unsigned int	lpddr3phy_con2; +	unsigned int	lpddr3phy_con3; +	unsigned int	lpddr3phy_con4; +	unsigned int	lpddr3phy_con5;		/* 0x10030a28 */ +	unsigned int	pll_div2_sel; +	unsigned char	res127[0xd0]; +	unsigned int	cmu_cdrex_spare0; +	unsigned int	cmu_cdrex_spare1; +	unsigned int	cmu_cdrex_spare2; +	unsigned int	cmu_cdrex_spare3; +	unsigned int	cmu_cdrex_spare4; +	unsigned char	res128[0x34dc]; +	unsigned int	cmu_cdrex_version;		/* 0x10033ff0 */ +	unsigned char	res129[0x400c]; +	unsigned int	kpll_lock; +	unsigned char	res130[0xfc]; +	unsigned int	kpll_con0; +	unsigned int	kpll_con1; +	unsigned char	res131[0xf8]; +	unsigned int	src_kfc; +	unsigned char	res132[0x1fc]; +	unsigned int	mux_stat_kfc;		/* 0x10038400 */ +	unsigned char	res133[0xfc]; +	unsigned int	div_kfc0; +	unsigned char	res134[0xfc]; +	unsigned int	div_stat_kfc0; +	unsigned char	res135[0xfc]; +	unsigned int	gate_bus_cpu_kfc; +	unsigned char	res136[0xfc]; +	unsigned int	gate_sclk_cpu_kfc; +	unsigned char	res137[0x1fc]; +	unsigned int	clkout_cmu_kfc; +	unsigned int	clkout_cmu_kfc_div_stat;	/* 0x10038a04 */ +	unsigned char	res138[0x5f8]; +	unsigned int	armclk_stopctrl_kfc; +	unsigned char	res139[0x4]; +	unsigned int	armclk_ema_ctrl_kfc; +	unsigned int	armclk_ema_status_kfc; +	unsigned char	res140[0x10]; +	unsigned int	pwr_ctrl_kfc; +	unsigned int	pwr_ctrl2_kfc; +	unsigned char	res141[0xd8]; +	unsigned int	kpll_con0_l8; +	unsigned int	kpll_con0_l7; +	unsigned int	kpll_con0_l6; +	unsigned int	kpll_con0_l5; +	unsigned int	kpll_con0_l4; +	unsigned int	kpll_con0_l3; +	unsigned int	kpll_con0_l2; +	unsigned int	kpll_con0_l1; +	unsigned int	iem_control_kfc;		/* 0x10039120 */ +	unsigned char	res142[0xdc]; +	unsigned int	kpll_con1_l8; +	unsigned int	kpll_con1_l7; +	unsigned int	kpll_con1_l6; +	unsigned int	kpll_con1_l5; +	unsigned int	kpll_con1_l4; +	unsigned int	kpll_con1_l3; +	unsigned int	kpll_con1_l2; +	unsigned int	kpll_con1_l1; +	unsigned char	res143[0xe0]; +	unsigned int	clkdiv_iem_l8_kfc;		/* 0x10039300 */ +	unsigned int	clkdiv_iem_l7_kfc; +	unsigned int	clkdiv_iem_l6_kfc; +	unsigned int	clkdiv_iem_l5_kfc; +	unsigned int	clkdiv_iem_l4_kfc; +	unsigned int	clkdiv_iem_l3_kfc; +	unsigned int	clkdiv_iem_l2_kfc; +	unsigned int	clkdiv_iem_l1_kfc; +	unsigned char	res144[0xe0]; +	unsigned int	l2_status_kfc; +	unsigned char	res145[0xc]; +	unsigned int	cpu_status_kfc;		/* 0x10039410 */ +	unsigned char	res146[0xc]; +	unsigned int	ptm_status_kfc; +	unsigned char	res147[0xbdc]; +	unsigned int	cmu_kfc_spare0; +	unsigned int	cmu_kfc_spare1; +	unsigned int	cmu_kfc_spare2; +	unsigned int	cmu_kfc_spare3; +	unsigned int	cmu_kfc_spare4; +	unsigned char	res148[0x1fdc]; +	unsigned int	cmu_kfc_version;		/* 0x1003bff0 */ +}; +  /* structure for epll configuration used in audio clock configuration */  struct set_epll_con_val {  	unsigned int freq_out;		/* frequency out */ diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index b4ef03e8a..573f75553 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -53,6 +53,7 @@  #define EXYNOS4_AUDIOSS_BASE		DEVICE_NOT_AVAILABLE  #define EXYNOS4_USB_HOST_XHCI_BASE	DEVICE_NOT_AVAILABLE  #define EXYNOS4_USB3PHY_BASE		DEVICE_NOT_AVAILABLE +#define EXYNOS4_DMC_TZASC_BASE		DEVICE_NOT_AVAILABLE  /* EXYNOS4X12 */  #define EXYNOS4X12_GPIO_PART3_BASE	0x03860000 @@ -91,8 +92,9 @@  #define EXYNOS4X12_AUDIOSS_BASE		DEVICE_NOT_AVAILABLE  #define EXYNOS4X12_USB_HOST_XHCI_BASE	DEVICE_NOT_AVAILABLE  #define EXYNOS4X12_USB3PHY_BASE		DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_DMC_TZASC_BASE	DEVICE_NOT_AVAILABLE -/* EXYNOS5 Common*/ +/* EXYNOS5 */  #define EXYNOS5_I2C_SPACING		0x10000  #define EXYNOS5_AUDIOSS_BASE		0x03810000 @@ -129,6 +131,46 @@  #define EXYNOS5_ADC_BASE		DEVICE_NOT_AVAILABLE  #define EXYNOS5_MODEM_BASE		DEVICE_NOT_AVAILABLE +#define EXYNOS5_DMC_TZASC_BASE		DEVICE_NOT_AVAILABLE + +/* EXYNOS5420 */ +#define EXYNOS5420_AUDIOSS_BASE		0x03810000 +#define EXYNOS5420_GPIO_PART5_BASE	0x03860000 +#define EXYNOS5420_PRO_ID		0x10000000 +#define EXYNOS5420_CLOCK_BASE		0x10010000 +#define EXYNOS5420_POWER_BASE		0x10040000 +#define EXYNOS5420_SWRESET		0x10040400 +#define EXYNOS5420_SYSREG_BASE		0x10050000 +#define EXYNOS5420_TZPC_BASE		0x100E0000 +#define EXYNOS5420_WATCHDOG_BASE	0x101D0000 +#define EXYNOS5420_ACE_SFR_BASE		0x10830000 +#define EXYNOS5420_DMC_PHY_BASE		0x10C00000 +#define EXYNOS5420_DMC_CTRL_BASE	0x10C20000 +#define EXYNOS5420_DMC_TZASC_BASE	0x10D40000 +#define EXYNOS5420_USB_HOST_EHCI_BASE	0x12110000 +#define EXYNOS5420_MMC_BASE		0x12200000 +#define EXYNOS5420_SROMC_BASE		0x12250000 +#define EXYNOS5420_UART_BASE		0x12C00000 +#define EXYNOS5420_I2C_BASE		0x12C60000 +#define EXYNOS5420_I2C_8910_BASE	0x12E00000 +#define EXYNOS5420_SPI_BASE		0x12D20000 +#define EXYNOS5420_I2S_BASE		0x12D60000 +#define EXYNOS5420_PWMTIMER_BASE	0x12DD0000 +#define EXYNOS5420_SPI_ISP_BASE		0x131A0000 +#define EXYNOS5420_GPIO_PART2_BASE	0x13400000 +#define EXYNOS5420_GPIO_PART3_BASE	0x13410000 +#define EXYNOS5420_GPIO_PART4_BASE	0x14000000 +#define EXYNOS5420_GPIO_PART1_BASE	0x14010000 +#define EXYNOS5420_MIPI_DSIM_BASE	0x14500000 +#define EXYNOS5420_DP_BASE		0x145B0000 + +#define EXYNOS5420_USBPHY_BASE		DEVICE_NOT_AVAILABLE +#define EXYNOS5420_USBOTG_BASE		DEVICE_NOT_AVAILABLE +#define EXYNOS5420_FIMD_BASE		DEVICE_NOT_AVAILABLE +#define EXYNOS5420_ADC_BASE		DEVICE_NOT_AVAILABLE +#define EXYNOS5420_MODEM_BASE		DEVICE_NOT_AVAILABLE +#define EXYNOS5420_USB3PHY_BASE		DEVICE_NOT_AVAILABLE +#define EXYNOS5420_USB_HOST_XHCI_BASE	DEVICE_NOT_AVAILABLE  #ifndef __ASSEMBLY__  #include <asm/io.h> @@ -163,6 +205,10 @@ static inline void s5p_set_cpu_id(void)  		/* Exynos5250 */  		s5p_cpu_id = 0x5250;  		break; +	case 0x420: +		/* Exynos5420 */ +		s5p_cpu_id = 0x5420; +		break;  	}  } @@ -190,6 +236,7 @@ static inline int __attribute__((no_instrument_function)) \  IS_EXYNOS_TYPE(exynos4210, 0x4210)  IS_EXYNOS_TYPE(exynos4412, 0x4412)  IS_EXYNOS_TYPE(exynos5250, 0x5250) +IS_EXYNOS_TYPE(exynos5420, 0x5420)  #define SAMSUNG_BASE(device, base)				\  static inline unsigned int __attribute__((no_instrument_function)) \ @@ -200,6 +247,8 @@ static inline unsigned int __attribute__((no_instrument_function)) \  			return EXYNOS4X12_##base;		\  		return EXYNOS4_##base;				\  	} else if (cpu_is_exynos5()) {				\ +		if (proid_is_exynos5420())			\ +			return EXYNOS5420_##base;		\  		return EXYNOS5_##base;				\  	}							\  	return 0;						\ @@ -237,6 +286,7 @@ SAMSUNG_BASE(spi_isp, SPI_ISP_BASE)  SAMSUNG_BASE(tzpc, TZPC_BASE)  SAMSUNG_BASE(dmc_ctrl, DMC_CTRL_BASE)  SAMSUNG_BASE(dmc_phy, DMC_PHY_BASE) +SAMSUNG_BASE(dmc_tzasc, DMC_TZASC_BASE)  SAMSUNG_BASE(audio_ass, AUDIOSS_BASE)  #endif diff --git a/arch/arm/include/asm/arch-exynos/dmc.h b/arch/arm/include/asm/arch-exynos/dmc.h index f65c676cc..d78536d2d 100644 --- a/arch/arm/include/asm/arch-exynos/dmc.h +++ b/arch/arm/include/asm/arch-exynos/dmc.h @@ -205,6 +205,127 @@ struct exynos5_dmc {  	unsigned int pmcnt3_ppc_a;  }; +struct exynos5420_dmc { +	unsigned int concontrol; +	unsigned int memcontrol; +	unsigned int cgcontrol; +	unsigned char res500[0x4]; +	unsigned int directcmd; +	unsigned int prechconfig0; +	unsigned int phycontrol0; +	unsigned int prechconfig1; +	unsigned char res1[0x8]; +	unsigned int pwrdnconfig; +	unsigned int timingpzq; +	unsigned int timingref; +	unsigned int timingrow0; +	unsigned int timingdata0; +	unsigned int timingpower0; +	unsigned int phystatus; +	unsigned int etctiming; +	unsigned int chipstatus; +	unsigned char res3[0x8]; +	unsigned int mrstatus; +	unsigned char res4[0x8]; +	unsigned int qoscontrol0; +	unsigned char resr5[0x4]; +	unsigned int qoscontrol1; +	unsigned char res6[0x4]; +	unsigned int qoscontrol2; +	unsigned char res7[0x4]; +	unsigned int qoscontrol3; +	unsigned char res8[0x4]; +	unsigned int qoscontrol4; +	unsigned char res9[0x4]; +	unsigned int qoscontrol5; +	unsigned char res10[0x4]; +	unsigned int qoscontrol6; +	unsigned char res11[0x4]; +	unsigned int qoscontrol7; +	unsigned char res12[0x4]; +	unsigned int qoscontrol8; +	unsigned char res13[0x4]; +	unsigned int qoscontrol9; +	unsigned char res14[0x4]; +	unsigned int qoscontrol10; +	unsigned char res15[0x4]; +	unsigned int qoscontrol11; +	unsigned char res16[0x4]; +	unsigned int qoscontrol12; +	unsigned char res17[0x4]; +	unsigned int qoscontrol13; +	unsigned char res18[0x4]; +	unsigned int qoscontrol14; +	unsigned char res19[0x4]; +	unsigned int qoscontrol15; +	unsigned char res20[0x4]; +	unsigned int timing_set_sw; +	unsigned int timingrow1; +	unsigned int timingdata1; +	unsigned int timingpower1; +	unsigned char res300[0x4]; +	unsigned int wrtra_config; +	unsigned int rdlvl_config; +	unsigned char res21[0x4]; +	unsigned int brbrsvcontrol; +	unsigned int brbrsvconfig; +	unsigned int brbqosconfig; +	unsigned char res301[0x14]; +	unsigned int wrlvl_config0; +	unsigned int wrlvl_config1; +	unsigned int wrlvl_status; +	unsigned char res23[0x4]; +	unsigned int ppcclockon; +	unsigned int perevconfig0; +	unsigned int perevconfig1; +	unsigned int perevconfig2; +	unsigned int perevconfig3; +	unsigned char res24[0xc]; +	unsigned int control_io_rdata; +	unsigned char res240[0xc]; +	unsigned int cacal_config0; +	unsigned int cacal_config1; +	unsigned int cacal_status; +	unsigned char res302[0xa4]; +	unsigned int bp_control0; +	unsigned int bp_config0_r; +	unsigned int bp_config0_w; +	unsigned char res303[0x4]; +	unsigned int bp_control1; +	unsigned int bp_config1_r; +	unsigned int bp_config1_w; +	unsigned char res304[0x4]; +	unsigned int bp_control2; +	unsigned int bp_config2_r; +	unsigned int bp_config2_w; +	unsigned char res305[0x4]; +	unsigned int bp_control3; +	unsigned int bp_config3_r; +	unsigned int bp_config3_w; +	unsigned char res306[0xddb4]; +	unsigned int pmnc_ppc; +	unsigned char res25[0xc]; +	unsigned int cntens_ppc; +	unsigned char res26[0xc]; +	unsigned int cntenc_ppc; +	unsigned char res27[0xc]; +	unsigned int intens_ppc; +	unsigned char res28[0xc]; +	unsigned int intenc_ppc; +	unsigned char res29[0xc]; +	unsigned int flag_ppc; +	unsigned char res30[0xac]; +	unsigned int ccnt_ppc; +	unsigned char res31[0xc]; +	unsigned int pmcnt0_ppc; +	unsigned char res32[0xc]; +	unsigned int pmcnt1_ppc; +	unsigned char res33[0xc]; +	unsigned int pmcnt2_ppc; +	unsigned char res34[0xc]; +	unsigned int pmcnt3_ppc; +}; +  struct exynos5_phy_control {  	unsigned int phy_con0;  	unsigned int phy_con1; @@ -252,6 +373,61 @@ struct exynos5_phy_control {  	unsigned int phy_con42;  }; +struct exynos5420_phy_control { +	unsigned int phy_con0; +	unsigned int phy_con1; +	unsigned int phy_con2; +	unsigned int phy_con3; +	unsigned int phy_con4; +	unsigned int phy_con5; +	unsigned int phy_con6; +	unsigned char res2[0x4]; +	unsigned int phy_con8; +	unsigned char res5[0x4]; +	unsigned int phy_con10; +	unsigned int phy_con11; +	unsigned int phy_con12; +	unsigned int phy_con13; +	unsigned int phy_con14; +	unsigned int phy_con15; +	unsigned int phy_con16; +	unsigned char res4[0x4]; +	unsigned int phy_con17; +	unsigned int phy_con18; +	unsigned int phy_con19; +	unsigned int phy_con20; +	unsigned int phy_con21; +	unsigned int phy_con22; +	unsigned int phy_con23; +	unsigned int phy_con24; +	unsigned int phy_con25; +	unsigned int phy_con26; +	unsigned int phy_con27; +	unsigned int phy_con28; +	unsigned int phy_con29; +	unsigned int phy_con30; +	unsigned int phy_con31; +	unsigned int phy_con32; +	unsigned int phy_con33; +	unsigned int phy_con34; +	unsigned char res6[0x8]; +	unsigned int phy_con37; +	unsigned char res7[0x4]; +	unsigned int phy_con39; +	unsigned int phy_con40; +	unsigned int phy_con41; +	unsigned int phy_con42; +}; + +struct exynos5420_tzasc { +	unsigned char res1[0xf00]; +	unsigned int membaseconfig0; +	unsigned int membaseconfig1; +	unsigned char res2[0x8]; +	unsigned int memconfig0; +	unsigned int memconfig1; +}; +  enum ddr_mode {  	DDR_MODE_DDR2,  	DDR_MODE_DDR3, @@ -286,6 +462,7 @@ enum mem_manuf {  #define PHY_CON0_T_WRRDCMD_SHIFT	17  #define PHY_CON0_T_WRRDCMD_MASK		(0x7 << PHY_CON0_T_WRRDCMD_SHIFT)  #define PHY_CON0_CTRL_DDR_MODE_SHIFT	11 +#define PHY_CON0_CTRL_DDR_MODE_MASK	0x3  /* PHY_CON1 register fields */  #define PHY_CON1_RDLVL_RDDATA_ADJ_SHIFT	0 diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index a1a74393d..2a1985215 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -127,6 +127,58 @@ struct exynos4x12_gpio_part4 {  	struct s5p_gpio_bank v4;  }; +struct exynos5420_gpio_part1 { +	struct s5p_gpio_bank a0; +	struct s5p_gpio_bank a1; +	struct s5p_gpio_bank a2; +	struct s5p_gpio_bank b0; +	struct s5p_gpio_bank b1; +	struct s5p_gpio_bank b2; +	struct s5p_gpio_bank b3; +	struct s5p_gpio_bank b4; +	struct s5p_gpio_bank h0; +}; + +struct exynos5420_gpio_part2 { +	struct s5p_gpio_bank y7; /* 0x1340_0000 */ +	struct s5p_gpio_bank res[0x5f]; /*  */ +	struct s5p_gpio_bank x0; /* 0x1340_0C00 */ +	struct s5p_gpio_bank x1; /* 0x1340_0C20 */ +	struct s5p_gpio_bank x2; /* 0x1340_0C40 */ +	struct s5p_gpio_bank x3; /* 0x1340_0C60 */ +}; + +struct exynos5420_gpio_part3 { +	struct s5p_gpio_bank c0; +	struct s5p_gpio_bank c1; +	struct s5p_gpio_bank c2; +	struct s5p_gpio_bank c3; +	struct s5p_gpio_bank c4; +	struct s5p_gpio_bank d1; +	struct s5p_gpio_bank y0; +	struct s5p_gpio_bank y1; +	struct s5p_gpio_bank y2; +	struct s5p_gpio_bank y3; +	struct s5p_gpio_bank y4; +	struct s5p_gpio_bank y5; +	struct s5p_gpio_bank y6; +}; + +struct exynos5420_gpio_part4 { +	struct s5p_gpio_bank e0; /* 0x1400_0000 */ +	struct s5p_gpio_bank e1; /* 0x1400_0020 */ +	struct s5p_gpio_bank f0; /* 0x1400_0040 */ +	struct s5p_gpio_bank f1; /* 0x1400_0060 */ +	struct s5p_gpio_bank g0; /* 0x1400_0080 */ +	struct s5p_gpio_bank g1; /* 0x1400_00A0 */ +	struct s5p_gpio_bank g2; /* 0x1400_00C0 */ +	struct s5p_gpio_bank j4; /* 0x1400_00E0 */ +}; + +struct exynos5420_gpio_part5 { +	struct s5p_gpio_bank z0; /* 0x0386_0000 */ +}; +  struct exynos5_gpio_part1 {  	struct s5p_gpio_bank a0;  	struct s5p_gpio_bank a1; @@ -259,16 +311,67 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);  	    - EXYNOS5_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \  	  * GPIO_PER_BANK) + pin) + EXYNOS5_GPIO_PART2_MAX) + +/* EXYNOS5420 */ +#define exynos5420_gpio_part1_get_nr(bank, pin) \ +	((((((unsigned int) &(((struct exynos5420_gpio_part1 *)\ +			       EXYNOS5420_GPIO_PART1_BASE)->bank)) \ +	    - EXYNOS5420_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \ +	  * GPIO_PER_BANK) + pin) + +#define EXYNOS5420_GPIO_PART1_MAX ((sizeof(struct exynos5420_gpio_part1) \ +			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) + +#define exynos5420_gpio_part2_get_nr(bank, pin) \ +	(((((((unsigned int) &(((struct exynos5420_gpio_part2 *)\ +				EXYNOS5420_GPIO_PART2_BASE)->bank)) \ +	    - EXYNOS5420_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \ +	  * GPIO_PER_BANK) + pin) + EXYNOS5420_GPIO_PART1_MAX) + +#define EXYNOS5420_GPIO_PART2_MAX ((sizeof(struct exynos5420_gpio_part2) \ +			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) + +#define exynos5420_gpio_part3_get_nr(bank, pin) \ +	(((((((unsigned int) &(((struct exynos5420_gpio_part3 *)\ +				EXYNOS5420_GPIO_PART3_BASE)->bank)) \ +	    - EXYNOS5420_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \ +	  * GPIO_PER_BANK) + pin) + EXYNOS5420_GPIO_PART2_MAX) + +#define EXYNOS5420_GPIO_PART3_MAX ((sizeof(struct exynos5420_gpio_part3) \ +			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) + +#define exynos5420_gpio_part4_get_nr(bank, pin) \ +	(((((((unsigned int) &(((struct exynos5420_gpio_part4 *)\ +				EXYNOS5420_GPIO_PART4_BASE)->bank)) \ +	    - EXYNOS5420_GPIO_PART4_BASE) / sizeof(struct s5p_gpio_bank)) \ +	  * GPIO_PER_BANK) + pin) + EXYNOS5420_GPIO_PART3_MAX) + +#define EXYNOS5420_GPIO_PART4_MAX ((sizeof(struct exynos5420_gpio_part4) \ +			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) + +#define EXYNOS5420_GPIO_PART5_MAX ((sizeof(struct exynos5420_gpio_part5) \ +			    / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) +  static inline unsigned int s5p_gpio_base(int nr)  {  	if (cpu_is_exynos5()) { -		if (nr < EXYNOS5_GPIO_PART1_MAX) -			return EXYNOS5_GPIO_PART1_BASE; -		else if (nr < EXYNOS5_GPIO_PART2_MAX) -			return EXYNOS5_GPIO_PART2_BASE; -		else -			return EXYNOS5_GPIO_PART3_BASE; - +		if (proid_is_exynos5420()) { +			if (nr < EXYNOS5420_GPIO_PART1_MAX) +				return EXYNOS5420_GPIO_PART1_BASE; +			else if (nr < EXYNOS5420_GPIO_PART2_MAX) +				return EXYNOS5420_GPIO_PART2_BASE; +			else if (nr < EXYNOS5420_GPIO_PART3_MAX) +				return EXYNOS5420_GPIO_PART3_BASE; +			else +				return EXYNOS5420_GPIO_PART4_BASE; +		} else { +			if (nr < EXYNOS5_GPIO_PART1_MAX) +				return EXYNOS5_GPIO_PART1_BASE; +			else if (nr < EXYNOS5_GPIO_PART2_MAX) +				return EXYNOS5_GPIO_PART2_BASE; +			else +				return EXYNOS5_GPIO_PART3_BASE; +		}  	} else if (cpu_is_exynos4()) {  		if (nr < EXYNOS4_GPIO_PART1_MAX)  			return EXYNOS4_GPIO_PART1_BASE; @@ -282,13 +385,25 @@ static inline unsigned int s5p_gpio_base(int nr)  static inline unsigned int s5p_gpio_part_max(int nr)  {  	if (cpu_is_exynos5()) { -		if (nr < EXYNOS5_GPIO_PART1_MAX) -			return 0; -		else if (nr < EXYNOS5_GPIO_PART2_MAX) -			return EXYNOS5_GPIO_PART1_MAX; -		else -			return EXYNOS5_GPIO_PART2_MAX; - +		if (proid_is_exynos5420()) { +			if (nr < EXYNOS5420_GPIO_PART1_MAX) +				return 0; +			else if (nr < EXYNOS5420_GPIO_PART2_MAX) +				return EXYNOS5420_GPIO_PART1_MAX; +			else if (nr < EXYNOS5420_GPIO_PART3_MAX) +				return EXYNOS5420_GPIO_PART2_MAX; +			else if (nr < EXYNOS5420_GPIO_PART4_MAX) +				return EXYNOS5420_GPIO_PART3_MAX; +			else +				return EXYNOS5420_GPIO_PART4_MAX; +		} else { +			if (nr < EXYNOS5_GPIO_PART1_MAX) +				return 0; +			else if (nr < EXYNOS5_GPIO_PART2_MAX) +				return EXYNOS5_GPIO_PART1_MAX; +			else +				return EXYNOS5_GPIO_PART2_MAX; +		}  	} else if (cpu_is_exynos4()) {  		if (proid_is_exynos4412()) {  			if (nr < EXYNOS4X12_GPIO_PART1_MAX) diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h index 64bd8b7c9..30c7f1829 100644 --- a/arch/arm/include/asm/arch-exynos/periph.h +++ b/arch/arm/include/asm/arch-exynos/periph.h @@ -34,6 +34,9 @@ enum periph_id {  	PERIPH_ID_SDMMC1,  	PERIPH_ID_SDMMC2,  	PERIPH_ID_SDMMC3, +	PERIPH_ID_I2C8 = 87, +	PERIPH_ID_I2C9, +	PERIPH_ID_I2C10 = 203,  	PERIPH_ID_I2S0 = 98,  	PERIPH_ID_I2S1 = 99, diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h index 2bfee18eb..c9609a23f 100644 --- a/arch/arm/include/asm/arch-exynos/power.h +++ b/arch/arm/include/asm/arch-exynos/power.h @@ -831,6 +831,843 @@ struct exynos5_power {  	unsigned int	cmu_reset_mau_option;  	unsigned char	res163[0x24];  }; + +struct exynos5420_power { +	unsigned int	om_stat; +	unsigned int	lpi_mask0; +	unsigned int	lpi_mask1; +	unsigned char	res1[0x10]; +	unsigned int	rtc_clko_sel; +	unsigned char	res2[0x1e0]; +	unsigned int	central_seq_configuration; +	unsigned int	central_seq_status; +	unsigned int	central_seq_option; +	unsigned char	res3[0x14]; +	unsigned int	seq_transition0; +	unsigned int	seq_transition1; +	unsigned int	seq_transition2; +	unsigned int	seq_transition3; +	unsigned int	seq_transition4; +	unsigned int	seq_transition5; +	unsigned int	seq_transition6; +	unsigned int	seq_transition7; +	unsigned int	central_seq_coreblk_configuration; +	unsigned int	central_seq_coreblk_status; +	unsigned int	central_seq_coreblk_option; +	unsigned char	res4[0x14]; +	unsigned int	seq_coreblk_transition0; +	unsigned int	seq_coreblk_transition1; +	unsigned int	seq_coreblk_transition2; +	unsigned int	seq_coreblk_transition3; +	unsigned int	seq_coreblk_transition4; +	unsigned int	seq_coreblk_transition5; +	unsigned int	seq_coreblk_transition6; +	unsigned int	seq_coreblk_transition7; +	unsigned char	res5[0x180]; +	unsigned int	swreset; +	unsigned int	rst_stat; +	unsigned int	automatic_wdt_reset_disable; +	unsigned int	mask_wdt_reset_request; +	unsigned int	mask_wreset_request; +	unsigned char	res6[0xec]; +	unsigned int	reset_sequencer_configuration; +	unsigned int	reset_sequencer_status; +	unsigned int	reset_sequencer_option; +	unsigned char	res7[0xf4]; +	unsigned int	wakeup_stat; +	unsigned int	eint_wakeup_mask; +	unsigned int	wakeup_mask; +	unsigned int	wakeup_interrupt; +	unsigned char	res8[0x10]; +	unsigned int	wakeup_stat_coreblk; +	unsigned int	eint_wakeup_mask_coreblk; +	unsigned int	wakeup_mask_coreblk; +	unsigned int	wakeup_interrupt_coreblk; +	unsigned char	res9[0xd0]; +	unsigned int	hdmi_phy_control; +	unsigned int	usbdev_phy_control; +	unsigned int	usbdev1_phy_control; +	unsigned int	usbhost_phy_control; +	unsigned char	res104[0x4]; +	unsigned int	mipi_phy0_control; +	unsigned int	mipi_phy1_control; +	unsigned int	mipi_phy2_control; +	unsigned int	adc_phy_control; +	unsigned int	mtcadc_phy_control; +	unsigned int	dptx_phy_control; +	unsigned char	res10[0xd4]; +	unsigned int	inform0; +	unsigned int	inform1; +	unsigned int	inform2; +	unsigned int	inform3; +	unsigned int	sysip_dat0; +	unsigned int	sysip_dat1; +	unsigned int	sysip_dat2; +	unsigned int	sysip_dat3; +	unsigned char	res11[0xe0]; +	unsigned int	pmu_spare0; +	unsigned int	pmu_spare1; +	unsigned int	pmu_spare2; +	unsigned int	pmu_spare3; +	unsigned char	res12[0x4]; +	unsigned int	cg_status0; +	unsigned int	cg_status1; +	unsigned int	cg_status2; +	unsigned int	cg_status3; +	unsigned int	cg_status4; +	unsigned char	res200[0x58]; +	unsigned int	irom_data_reg0; +	unsigned int	irom_data_reg1; +	unsigned int	irom_data_reg2; +	unsigned int	irom_data_reg3; +	unsigned char	res13[0x70]; +	unsigned int	pmu_debug; +	unsigned char	res14[0x5fc]; +	unsigned int	arm_core0_sys_pwr_reg; +	unsigned char	res500[0xc]; +	unsigned int	arm_core1_sys_pwr_reg; +	unsigned char	res501[0xc]; +	unsigned int	arm_core2_sys_pwr_reg; +	unsigned char	res502[0xc]; +	unsigned int	arm_core3_sys_pwr_reg; +	unsigned char	res503[0xc]; +	unsigned int	kfc_core0_sys_pwr_reg; +	unsigned char	res504[0xc]; +	unsigned int	kfc_core1_sys_pwr_reg; +	unsigned char	res505[0xc]; +	unsigned int	kfc_core2_sys_pwr_reg; +	unsigned char	res506[0xc]; +	unsigned int	kfc_core3_sys_pwr_reg; +	unsigned char	res507[0x1c]; +	unsigned int	isp_arm_sys_pwr_reg; +	unsigned char	res18[0xc]; +	unsigned int	arm_common_sys_pwr_reg; +	unsigned char	res508[0xc]; +	unsigned int	kfc_common_sys_pwr_reg; +	unsigned char	res19[0xc]; +	unsigned int	arm_l2_sys_pwr_reg; +	unsigned char	res509[0xc]; +	unsigned int	kfc_l2_sys_pwr_reg; +	unsigned char	res20[0xc]; +	unsigned int	cmu_cpu_aclkstop_sys_pwr_reg; +	unsigned int	cmu_cpu_sclkstop_sys_pwr_reg; +	unsigned char	res510[0x8]; +	unsigned int	cmu_kfc_aclkstop_sys_pwr_reg; +	unsigned char	res511[0xc]; +	unsigned int	cmu_aclkstop_sys_pwr_reg; +	unsigned int	cmu_sclkstop_sys_pwr_reg; +	unsigned char	res21[0x4]; +	unsigned int	cmu_reset_sys_pwr_reg; +	unsigned char	res22[0x10]; +	unsigned int	cmu_aclkstop_coreblk_sys_pwr_reg; +	unsigned int	cmu_sclkstop_coreblk_sys_pwr_reg; +	unsigned char	res23[0x4]; +	unsigned int	cmu_reset_coreblk_sys_pwr_reg; +	unsigned int	dram_freq_down_sys_pwr_reg; +	unsigned int	ddrphy_dlloff_sys_pwr_reg; +	unsigned int	ddrphy_dlllock_sys_pwr_reg; +	unsigned char	res25[0x4]; +	unsigned int	apll_sysclk_sys_pwr_reg; +	unsigned int	mpll_sysclk_sys_pwr_reg; +	unsigned int	vpll_sysclk_sys_pwr_reg; +	unsigned int	epll_sysclk_sys_pwr_reg; +	unsigned int	bpll_sysclk_sys_pwr_reg; +	unsigned int	cpll_sysclk_sys_pwr_reg; +	unsigned int	dpll_sysclk_sys_pwr_reg; +	unsigned int	ipll_sysclk_sys_pwr_reg; +	unsigned int	kpll_sysclk_sys_pwr_reg; +	unsigned int	mplluser_sysclk_sys_pwr_reg; +	unsigned char	res512[0x8]; +	unsigned int	bplluser_sysclk_sys_pwr_reg; +	unsigned int	rpll_sysclk_sys_pwr_reg; +	unsigned int	spll_sysclk_sys_pwr_reg; +	unsigned char	res26[0x4]; +	unsigned int	top_bus_sys_pwr_reg; +	unsigned int	top_retention_sys_pwr_reg; +	unsigned int	top_pwr_sys_pwr_reg; +	unsigned char	res29[0x4]; +	unsigned int	top_bus_coreblk_sys_pwr_reg; +	unsigned int	top_retention_coreblk_sys_pwr_reg; +	unsigned int	top_pwr_coreblk_sys_pwr_reg; +	unsigned char	res30[0x4]; +	unsigned int	logic_reset_sys_pwr_reg; +	unsigned int	oscclk_gate_sys_pwr_reg; +	unsigned char	res31[0x8]; +	unsigned int	logic_reset_coreblk_sys_pwr_reg; +	unsigned int	oscclk_gate_coreblk_sys_pwr_reg; +	unsigned int	intram_mem_sys_pwr_reg; +	unsigned int	introm_mem_sys_pwr_reg; +	unsigned char	res32[0x44]; +	unsigned int	pad_retention_mau_sys_pwr_reg; +	unsigned int	pad_retention_jtag_sys_pwr_reg; +	unsigned char	res36[0x4]; +	unsigned int	pad_retention_dram_sys_pwr_reg; +	unsigned int	pad_retention_uart_sys_pwr_reg; +	unsigned int	pad_retention_mmca_sys_pwr_reg; +	unsigned int	pad_retention_mmcb_sys_pwr_reg; +	unsigned int	pad_retention_mmcc_sys_pwr_reg; +	unsigned int	pad_retention_hsi_sys_pwr_reg; +	unsigned int	pad_retention_ebia_sys_pwr_reg; +	unsigned int	pad_retention_ebib_sys_pwr_reg; +	unsigned int	pad_retention_spi_sys_pwr_reg; +	unsigned int	pad_retention_dram_coreblk_sys_pwr_reg; +	unsigned char	res28[0x8]; +	unsigned int	pad_isolation_sys_pwr_reg; +	unsigned char	res37[0xc]; +	unsigned int	pad_isolation_coreblk_sys_pwr_reg; +	unsigned char	res38[0xc]; +	unsigned int	pad_alv_sel_sys_pwr_reg; +	unsigned char	res39[0x1c]; +	unsigned int	xusbxti_sys_pwr_reg; +	unsigned int	xxti_sys_pwr_reg; +	unsigned char	res40[0x38]; +	unsigned int	ext_regulator_sys_pwr_reg; +	unsigned char	res41[0x3c]; +	unsigned int	gpio_mode_sys_pwr_reg; +	unsigned char	res42[0x1c]; +	unsigned int	gpio_mode_coreblk_sys_pwr_reg; +	unsigned char	res43[0x1c]; +	unsigned int	gpio_mode_mau_sys_pwr_reg; +	unsigned int	top_asb_reset_sys_pwr_reg; +	unsigned int	top_asb_isolation_sys_pwr_reg; +	unsigned char	res44[0xb4]; +	unsigned int	gscl_sys_pwr_reg; +	unsigned int	isp_sys_pwr_reg; +	unsigned int	mfc_sys_pwr_reg; +	unsigned int	g3d_sys_pwr_reg; +	unsigned int	disp1_sys_pwr_reg; +	unsigned int	mau_sys_pwr_reg; +	unsigned int	g2d_sys_pwr_reg; +	unsigned int	msc_sys_pwr_reg; +	unsigned int	fsys_sys_pwr_reg; +	unsigned int	fsys2_sys_pwr_reg; +	unsigned int	psgen_sys_pwr_reg; +	unsigned int	peric_sys_pwr_reg; +	unsigned int	wcore_sys_pwr_reg; +	unsigned char	res46[0x4c]; +	unsigned int	cmu_clkstop_gscl_sys_pwr_reg; +	unsigned int	cmu_clkstop_isp_sys_pwr_reg; +	unsigned int	cmu_clkstop_mfc_sys_pwr_reg; +	unsigned int	cmu_clkstop_g3d_sys_pwr_reg; +	unsigned int	cmu_clkstop_disp1_sys_pwr_reg; +	unsigned int	cmu_clkstop_mau_sys_pwr_reg; +	unsigned int	cmu_clkstop_g2d_sys_pwr_reg; +	unsigned int	cmu_clkstop_msc_sys_pwr_reg; +	unsigned int	cmu_clkstop_fsys_sys_pwr_reg; +	unsigned int	cmu_clkstop_fsys2_sys_pwr_reg; +	unsigned int	cmu_clkstop_psgen_sys_pwr_reg; +	unsigned int	cmu_clkstop_peric_sys_pwr_reg; +	unsigned int	cmu_clkstop_wcore_sys_pwr_reg; +	unsigned char	res48[0x8]; +	unsigned int	cmu_sysclk_toppwr_sys_pwr_reg; +	unsigned int	cmu_sysclk_gscl_sys_pwr_reg; +	unsigned int	cmu_sysclk_isp_sys_pwr_reg; +	unsigned int	cmu_sysclk_mfc_sys_pwr_reg; +	unsigned int	cmu_sysclk_g3d_sys_pwr_reg; +	unsigned int	cmu_sysclk_disp1_sys_pwr_reg; +	unsigned int	cmu_sysclk_mau_sys_pwr_reg; +	unsigned int	cmu_sysclk_g2d_sys_pwr_reg; +	unsigned int	cmu_sysclk_msc_sys_pwr_reg; +	unsigned int	cmu_sysclk_fsys_sys_pwr_reg; +	unsigned int	cmu_sysclk_fsys2_sys_pwr_reg; +	unsigned int	cmu_sysclk_psgen_sys_pwr_reg; +	unsigned int	cmu_sysclk_peric_sys_pwr_reg; +	unsigned int	cmu_sysclk_wcore_sys_pwr_reg; +	unsigned int	cmu_sysclk_coreblk_toppwr_sys_pwr_reg; +	unsigned char	res50[0x78]; +	unsigned int	cmu_reset_fsys2_sys_pwr_reg; +	unsigned int	cmu_reset_psgen_sys_pwr_reg; +	unsigned int	cmu_reset_peric_sys_pwr_reg; +	unsigned int	cmu_reset_wcore_sys_pwr_reg; +	unsigned int	cmu_reset_gscl_sys_pwr_reg; +	unsigned int	cmu_reset_isp_sys_pwr_reg; +	unsigned int	cmu_reset_mfc_sys_pwr_reg; +	unsigned int	cmu_reset_g3d_sys_pwr_reg; +	unsigned int	cmu_reset_disp1_sys_pwr_reg; +	unsigned int	cmu_reset_mau_sys_pwr_reg; +	unsigned int	cmu_reset_g2d_sys_pwr_reg; +	unsigned int	cmu_reset_msc_sys_pwr_reg; +	unsigned int	cmu_reset_fsys_sys_pwr_reg; +	unsigned char	res52[0xa5c]; +	unsigned int	arm_core0_configuration; +	unsigned int	arm_core0_status; +	unsigned int	arm_core0_option; +	unsigned char	res53[0x14]; +	unsigned int	dis_irq_arm_core0_local_configuration; +	unsigned int	dis_irq_arm_core0_local_status; +	unsigned int	dis_irq_arm_core0_local_option; +	unsigned char	res54[0x14]; +	unsigned int	dis_irq_arm_core0_central_configuration; +	unsigned int	dis_irq_arm_core0_central_status; +	unsigned int	dis_irq_arm_core0_central_option; +	unsigned char	res55[0x34]; +	unsigned int	arm_core1_configuration; +	unsigned int	arm_core1_status; +	unsigned int	arm_core1_option; +	unsigned char	res56[0x14]; +	unsigned int	dis_irq_arm_core1_local_configuration; +	unsigned int	dis_irq_arm_core1_local_status; +	unsigned int	dis_irq_arm_core1_local_option; +	unsigned char	res57[0x14]; +	unsigned int	dis_irq_arm_core1_central_configuration; +	unsigned int	dis_irq_arm_core1_central_status; +	unsigned int	dis_irq_arm_core1_central_option; +	unsigned char	res600[0x34]; +	unsigned int	arm_core2_configuration; +	unsigned int	arm_core2_status; +	unsigned int	arm_core2_option; +	unsigned char	res601[0x14]; +	unsigned int	dis_irq_arm_core2_local_configuration; +	unsigned int	dis_irq_arm_core2_local_status; +	unsigned int	dis_irq_arm_core2_local_option; +	unsigned char	res602[0x14]; +	unsigned int	dis_irq_arm_core2_central_configuration; +	unsigned int	dis_irq_arm_core2_central_status; +	unsigned int	dis_irq_arm_core2_central_option; +	unsigned char	res603[0x34]; +	unsigned int	arm_core3_configuration; +	unsigned int	arm_core3_status; +	unsigned int	arm_core3_option; +	unsigned char	res900[0x14]; +	unsigned int	dis_irq_arm_core3_local_configuration; +	unsigned int	dis_irq_arm_core3_local_status; +	unsigned int	dis_irq_arm_core3_local_option; +	unsigned char	res901[0x14]; +	unsigned int	dis_irq_arm_core3_central_configuration; +	unsigned int	dis_irq_arm_core3_central_status; +	unsigned int	dis_irq_arm_core3_central_option; +	unsigned char	res604[0x34]; +	unsigned int	kfc_core0_configuration; +	unsigned int	kfc_core0_status; +	unsigned int	kfc_core0_option; +	unsigned char	res605[0x14]; +	unsigned int	dis_irq_kfc_core0_local_configuration; +	unsigned int	dis_irq_kfc_core0_local_status; +	unsigned int	dis_irq_kfc_core0_local_option; +	unsigned char	res606[0x14]; +	unsigned int	dis_irq_kfc_core0_central_configuration; +	unsigned int	dis_irq_kfc_core0_central_status; +	unsigned int	dis_irq_kfc_core0_central_option; +	unsigned char	res607[0x34]; +	unsigned int	kfc_core1_configuration; +	unsigned int	kfc_core1_status; +	unsigned int	kfc_core1_option; +	unsigned char	res608[0x14]; +	unsigned int	dis_irq_kfc_core1_local_configuration; +	unsigned int	dis_irq_kfc_core1_local_status; +	unsigned int	dis_irq_kfc_core1_local_option; +	unsigned char	res609[0x14]; +	unsigned int	dis_irq_kfc_core1_central_configuration; +	unsigned int	dis_irq_kfc_core1_central_status; +	unsigned int	dis_irq_kfc_core1_central_option; +	unsigned char	res610[0x34]; +	unsigned int	kfc_core2_configuration; +	unsigned int	kfc_core2_status; +	unsigned int	kfc_core2_option; +	unsigned char	res611[0x14]; +	unsigned int	dis_irq_kfc_core2_local_configuration; +	unsigned int	dis_irq_kfc_core2_local_status; +	unsigned int	dis_irq_kfc_core2_local_option; +	unsigned char	res612[0x14]; +	unsigned int	dis_irq_kfc_core2_central_configuration; +	unsigned int	dis_irq_kfc_core2_central_status; +	unsigned int	dis_irq_kfc_core2_central_option; +	unsigned char	res613[0x34]; +	unsigned int	kfc_core3_configuration; +	unsigned int	kfc_core3_status; +	unsigned int	kfc_core3_option; +	unsigned char	res614[0x14]; +	unsigned int	dis_irq_kfc_core3_local_configuration; +	unsigned int	dis_irq_kfc_core3_local_status; +	unsigned int	dis_irq_kfc_core3_local_option; +	unsigned char	res615[0x14]; +	unsigned int	dis_irq_kfc_core3_central_configuration; +	unsigned int	dis_irq_kfc_core3_central_status; +	unsigned int	dis_irq_kfc_core3_central_option; +	unsigned char	res61[0xb4]; +	unsigned int	isp_arm_configuration; +	unsigned int	isp_arm_status; +	unsigned int	isp_arm_option; +	unsigned char	res62[0x14]; +	unsigned int	dis_irq_isp_arm_local_configuration; +	unsigned int	dis_irq_isp_arm_local_status; +	unsigned int	dis_irq_isp_arm_local_option; +	unsigned char	res63[0x14]; +	unsigned int	dis_irq_isp_arm_central_configuration; +	unsigned int	dis_irq_isp_arm_central_status; +	unsigned int	dis_irq_isp_arm_central_option; +	unsigned char	res64[0x34]; +	unsigned int	arm_common_configuration; +	unsigned int	arm_common_status; +	unsigned int	arm_common_option; +	unsigned char	res616[0x74]; +	unsigned int	kfc_common_configuration; +	unsigned int	kfc_common_status; +	unsigned int	kfc_common_option; +	unsigned char	res65[0x74]; +	unsigned int	arm_l2_configuration; +	unsigned int	arm_l2_status; +	unsigned int	arm_l2_option; +	unsigned char	res617[0x74]; +	unsigned int	kfc_l2_configuration; +	unsigned int	kfc_l2_status; +	unsigned int	kfc_l2_option; +	unsigned char	res66[0x74]; +	unsigned int	cmu_cpu_aclkstop_configuration; +	unsigned int	cmu_cpu_aclkstop_status; +	unsigned int	cmu_cpu_aclkstop_option; +	unsigned char	res67[0x14]; +	unsigned int	cmu_cpu_sclkstop_configuration; +	unsigned int	cmu_cpu_sclkstop_status; +	unsigned int	cmu_cpu_sclkstop_option; +	unsigned char	res618[0x4]; +	unsigned int	cmu_kfc_aclkstop_configuration; +	unsigned int	cmu_kfc_aclkstop_status; +	unsigned int	cmu_kfc_aclkstop_option; +	unsigned char	res619[0xc4]; +	unsigned int	cmu_aclkstop_configuration; +	unsigned int	cmu_aclkstop_status; +	unsigned int	cmu_aclkstop_option; +	unsigned char	res620[0x14]; +	unsigned int	cmu_sclkstop_configuration; +	unsigned int	cmu_sclkstop_status; +	unsigned int	cmu_sclkstop_option; +	unsigned char	res68[0x34]; +	unsigned int	cmu_reset_configuration; +	unsigned int	cmu_reset_status; +	unsigned int	cmu_reset_option; +	unsigned char	res69[0x94]; +	unsigned int	cmu_aclkstop_coreblk_configuration; +	unsigned int	cmu_aclkstop_coreblk_status; +	unsigned int	cmu_aclkstop_coreblk_option; +	unsigned char	res70[0x14]; +	unsigned int	cmu_sclkstop_coreblk_configuration; +	unsigned int	cmu_sclkstop_coreblk_status; +	unsigned int	cmu_sclkstop_coreblk_option; +	unsigned char	res71[0x34]; +	unsigned int	cmu_reset_coreblk_configuration; +	unsigned int	cmu_reset_coreblk_status; +	unsigned int	cmu_reset_coreblk_option; +	unsigned char	res621[0x14]; +	unsigned int	dram_freq_down_configuration; +	unsigned int	dram_freq_down_status; +	unsigned int	dram_freq_down_option; +	unsigned char	res622[0x14]; +	unsigned int	ddrphy_dlloff_configuration; +	unsigned int	ddrphy_dlloff_status; +	unsigned int	ddrphy_dlloff_option; +	unsigned char	res72[0x14]; +	unsigned int	ddrphy_dlllock_configuration; +	unsigned int	ddrphy_dlllock_status; +	unsigned int	ddrphy_dlllock_option; +	unsigned char	res73[0x34]; +	unsigned int	apll_sysclk_configuration; +	unsigned int	apll_sysclk_status; +	unsigned int	apll_sysclk_option; +	unsigned char	res74[0x18]; +	unsigned int	mpll_sysclk_status; +	unsigned int	mpll_sysclk_option; +	unsigned char	res75[0x14]; +	unsigned int	vpll_sysclk_configuration; +	unsigned int	vpll_sysclk_status; +	unsigned int	vpll_sysclk_option; +	unsigned char	res76[0x14]; +	unsigned int	epll_sysclk_configuration; +	unsigned int	epll_sysclk_status; +	unsigned int	epll_sysclk_option; +	unsigned char	res77[0x14]; +	unsigned int	bpll_sysclk_configuration; +	unsigned int	bpll_sysclk_status; +	unsigned int	bpll_sysclk_option; +	unsigned char	res78[0x14]; +	unsigned int	cpll_sysclk_configuration; +	unsigned int	cpll_sysclk_status; +	unsigned int	cpll_sysclk_option; +	unsigned char	res79[0x14]; +	unsigned int	dpll_sysclk_configuration; +	unsigned int	dpll_sysclk_status; +	unsigned int	dpll_sysclk_option; +	unsigned char	res700[0x14]; +	unsigned int	ipll_sysclk_configuration; +	unsigned int	ipll_sysclk_status; +	unsigned int	ipll_sysclk_option; +	unsigned char	res903[0x14]; +	unsigned int	kpll_sysclk_configuration; +	unsigned int	kpll_sysclk_status; +	unsigned int	kpll_sysclk_option; +	unsigned char	res80[0x14]; +	unsigned int	mplluser_sysclk_configuration; +	unsigned int	mplluser_sysclk_status; +	unsigned int	mplluser_sysclk_option; +	unsigned char	res81[0x54]; +	unsigned int	bplluser_sysclk_configuration; +	unsigned int	bplluser_sysclk_status; +	unsigned int	bplluser_sysclk_option; +	unsigned char	res701[0x14]; +	unsigned int	rplluser_sysclk_configuration; +	unsigned int	rplluser_sysclk_status; +	unsigned int	rplluser_sysclk_option; +	unsigned char	res702[0x14]; +	unsigned int	splluser_sysclk_configuration; +	unsigned int	splluser_sysclk_status; +	unsigned int	splluser_sysclk_option; +	unsigned char	res82[0x34]; +	unsigned int	top_bus_configuration; +	unsigned int	top_bus_status; +	unsigned int	top_bus_option; +	unsigned char	res83[0x14]; +	unsigned int	top_retention_configuration; +	unsigned int	top_retention_status; +	unsigned int	top_retention_option; +	unsigned char	res84[0x14]; +	unsigned int	top_pwr_configuration; +	unsigned int	top_pwr_status; +	unsigned int	top_pwr_option; +	unsigned char	res85[0x34]; +	unsigned int	top_bus_coreblk_configuration; +	unsigned int	top_bus_coreblk_status; +	unsigned int	top_bus_coreblk_option; +	unsigned char	res86[0x14]; +	unsigned int	top_retention_coreblk_configuration; +	unsigned int	top_retention_coreblk_status; +	unsigned int	top_retention_coreblk_option; +	unsigned char	res87[0x14]; +	unsigned int	top_pwr_coreblk_configuration; +	unsigned int	top_pwr_coreblk_status; +	unsigned int	top_pwr_coreblk_option; +	unsigned char	res88[0x34]; +	unsigned int	logic_reset_configuration; +	unsigned int	logic_reset_status; +	unsigned int	logic_reset_option; +	unsigned char	res89[0x14]; +	unsigned int	oscclk_gate_configuration; +	unsigned int	oscclk_gate_status; +	unsigned int	oscclk_gate_option; +	unsigned char	res90[0x54]; +	unsigned int	logic_reset_coreblk_configuration; +	unsigned int	logic_reset_coreblk_status; +	unsigned int	logic_reset_coreblk_option; +	unsigned char	res91[0x14]; +	unsigned int	oscclk_gate_coreblk_configuration; +	unsigned int	oscclk_gate_coreblk_status; +	unsigned int	oscclk_gate_coreblk_option; +	unsigned char	res99[0x174]; +	unsigned int	intram_mem_configuration; +	unsigned int	intram_mem_status; +	unsigned int	intram_mem_option; +	unsigned char	res100[0x14]; +	unsigned int	introm_mem_configuration; +	unsigned int	introm_mem_status; +	unsigned int	introm_mem_option; +	unsigned char	res101[0xb4]; +	unsigned int	pad_retention_dram_configuration; +	unsigned int	pad_retention_dram_status; +	unsigned int	pad_retention_dram_option; +	unsigned char	res106[0x14]; +	unsigned int	pad_retention_mau_configuration; +	unsigned int	pad_retention_mau_status; +	unsigned int	pad_retention_mau_option; +	unsigned char	res107[0x14]; +	unsigned int	pad_retention_jtag_configuration; +	unsigned int	pad_retention_jtag_status; +	unsigned int	pad_retention_jtag_option; +	unsigned char	res92[0x74]; +	unsigned int	pad_retention_dram_configuration_2; +	unsigned int	pad_retention_dram_status_2; +	unsigned int	pad_retention_dram_option_2; +	unsigned char	res111[0x14]; +	unsigned int	pad_retention_uart_configuration; +	unsigned int	pad_retention_uart_status; +	unsigned int	pad_retention_uart_option; +	unsigned char	res112[0x14]; +	unsigned int	pad_retention_mmca_configuration; +	unsigned int	pad_retention_mmca_status; +	unsigned int	pad_retention_mmca_option; +	unsigned char	res113[0x14]; +	unsigned int	pad_retention_mmcb_configuration; +	unsigned int	pad_retention_mmcb_status; +	unsigned int	pad_retention_mmcb_option; +	unsigned char	res93[0x14]; +	unsigned int	pad_retention_mmcc_configuration; +	unsigned int	pad_retention_mmcc_status; +	unsigned int	pad_retention_mmcc_option; +	unsigned char	res94[0x14]; +	unsigned int	pad_retention_hsi_configuration; +	unsigned int	pad_retention_hsi_status; +	unsigned int	pad_retention_hsi_option; +	unsigned char	res114[0x14]; +	unsigned int	pad_retention_ebia_configuration; +	unsigned int	pad_retention_ebia_status; +	unsigned int	pad_retention_ebia_option; +	unsigned char	res115[0x14]; +	unsigned int	pad_retention_ebib_configuration; +	unsigned int	pad_retention_ebib_status; +	unsigned int	pad_retention_ebib_option; +	unsigned char	res116[0x14]; +	unsigned int	pad_retention_spi_configuration; +	unsigned int	pad_retention_spi_status; +	unsigned int	pad_retention_spi_option; +	unsigned char	res117[0x14]; +	unsigned int	pad_retention_dram_coreblk_configuration; +	unsigned int	pad_retention_dram_coreblk_status; +	unsigned int	pad_retention_dram_coreblk_option; +	unsigned char	res118[0x14]; +	unsigned int	pad_isolation_configuration; +	unsigned int	pad_isolation_status; +	unsigned int	pad_isolation_option; +	unsigned char	res119[0x74]; +	unsigned int	pad_isolation_coreblk_configuration; +	unsigned int	pad_isolation_coreblk_status; +	unsigned int	pad_isolation_coreblk_option; +	unsigned char	res120[0x74]; +	unsigned int	pad_alv_sel_configuration; +	unsigned int	pad_alv_sel_status; +	unsigned int	pad_alv_sel_option0; +	unsigned int	ps_hold_control; +	unsigned char	res130[0xf0]; +	unsigned int	xusbxti_configuration; +	unsigned int	xusbxti_status; +	unsigned int	xusbxti_option; +	unsigned char	res910[0x10]; +	unsigned int	xusbxti_duration3; +	unsigned int	xxti_configuration; +	unsigned int	xxti_status; +	unsigned int	xxti_option; +	unsigned char	res131[0x10]; +	unsigned int	xxti_duration3; +	unsigned char	res132[0x1c0]; +	unsigned int	ext_regulator_configuration; +	unsigned int	ext_regulator_status; +	unsigned int	ext_regulator_option; +	unsigned char	res133[0x10]; +	unsigned int	ext_regulator_duration3; +	unsigned char	res134[0x1e0]; +	unsigned int	gpio_mode_configuration; +	unsigned int	gpio_mode_status; +	unsigned int	gpio_mode_option; +	unsigned char	res135[0xf4]; +	unsigned int	gpio_mode_coreblk_configuration; +	unsigned int	gpio_mode_coreblk_status; +	unsigned int	gpio_mode_coreblk_option; +	unsigned char	res136[0xd4]; +	unsigned int	gpio_mode_mau_configuration; +	unsigned int	gpio_mode_mau_status; +	unsigned int	gpio_mode_mau_option; +	unsigned char	res137[0x14]; +	unsigned int	top_asb_reset_configuration; +	unsigned int	top_asb_reset_status; +	unsigned int	top_asb_reset_option; +	unsigned char	res138[0x14]; +	unsigned int	top_asb_isolation_configuration; +	unsigned int	top_asb_isolation_status; +	unsigned int	top_asb_isolation_option; +	unsigned char	res139[0x5d4]; +	unsigned int	gscl_configuration; +	unsigned int	gscl_status; +	unsigned int	gscl_option; +	unsigned char	res140[0x14]; +	unsigned int	isp_configuration; +	unsigned int	isp_status; +	unsigned int	isp_option; +	unsigned char	res141[0x34]; +	unsigned int	mfc_configuration; +	unsigned int	mfc_status; +	unsigned int	mfc_option; +	unsigned char	res142[0x14]; +	unsigned int	g3d_configuration; +	unsigned int	g3d_status; +	unsigned int	g3d_option; +	unsigned char	res143[0x34]; +	unsigned int	disp1_configuration; +	unsigned int	disp1_status; +	unsigned int	disp1_option; +	unsigned char	res144[0x14]; +	unsigned int	mau_configuration; +	unsigned int	mau_status; +	unsigned int	mau_option; +	unsigned char	res800[0x14]; +	unsigned int	g2d_configuration; +	unsigned int	g2d_status; +	unsigned int	g2d_option; +	unsigned char	res801[0x14]; +	unsigned int	msc_configuration; +	unsigned int	msc_status; +	unsigned int	msc_option; +	unsigned char	res802[0x14]; +	unsigned int	fsys_configuration; +	unsigned int	fsys_status; +	unsigned int	fsys_option; +	unsigned char	res803[0x14]; +	unsigned int	fsys2_configuration; +	unsigned int	fsys2_status; +	unsigned int	fsys2_option; +	unsigned char	res804[0x14]; +	unsigned int	psgen_configuration; +	unsigned int	psgen_status; +	unsigned int	psgen_option; +	unsigned char	res805[0x14]; +	unsigned int	peric_configuration; +	unsigned int	peric_status; +	unsigned int	peric_option; +	unsigned char	res806[0x14]; +	unsigned int	wcore_configuration; +	unsigned int	wcore_status; +	unsigned int	wcore_option; +	unsigned char	res145[0x234]; +	unsigned int	cmu_clkstop_gscl_configuration; +	unsigned int	cmu_clkstop_gscl_status; +	unsigned int	cmu_clkstop_gscl_option; +	unsigned char	res146[0x14]; +	unsigned int	cmu_clkstop_isp_configuration; +	unsigned int	cmu_clkstop_isp_status; +	unsigned int	cmu_clkstop_isp_option; +	unsigned char	res147[0x34]; +	unsigned int	cmu_clkstop_mfc_configuration; +	unsigned int	cmu_clkstop_mfc_status; +	unsigned int	cmu_clkstop_mfc_option; +	unsigned char	res148[0x14]; +	unsigned int	cmu_clkstop_g3d_configuration; +	unsigned int	cmu_clkstop_g3d_status; +	unsigned int	cmu_clkstop_g3d_option; +	unsigned char	res149[0x34]; +	unsigned int	cmu_clkstop_disp1_configuration; +	unsigned int	cmu_clkstop_disp1_status; +	unsigned int	cmu_clkstop_disp1_option; +	unsigned char	res150[0x14]; +	unsigned int	cmu_clkstop_mau_configuration; +	unsigned int	cmu_clkstop_mau_status; +	unsigned int	cmu_clkstop_mau_option; +	unsigned char	res807[0x14]; +	unsigned int	cmu_clkstop_g2d_configuration; +	unsigned int	cmu_clkstop_g2d_status; +	unsigned int	cmu_clkstop_g2d_option; +	unsigned char	res808[0x14]; +	unsigned int	cmu_clkstop_msc_configuration; +	unsigned int	cmu_clkstop_msc_status; +	unsigned int	cmu_clkstop_msc_option; +	unsigned char	res809[0x14]; +	unsigned int	cmu_clkstop_fsys_configuration; +	unsigned int	cmu_clkstop_fsys_status; +	unsigned int	cmu_clkstop_fsys_option; +	unsigned char	res810[0x14]; +	unsigned int	cmu_clkstop_fsys2_configuration; +	unsigned int	cmu_clkstop_fsys2_status; +	unsigned int	cmu_clkstop_fsys2_option; +	unsigned char	res811[0x14]; +	unsigned int	cmu_clkstop_psgen_configuration; +	unsigned int	cmu_clkstop_psgen_status; +	unsigned int	cmu_clkstop_psgen_option; +	unsigned char	res812[0x14]; +	unsigned int	cmu_clkstop_peric_configuration; +	unsigned int	cmu_clkstop_peric_status; +	unsigned int	cmu_clkstop_peric_option; +	unsigned char	res813[0x14]; +	unsigned int	cmu_clkstop_wcore_configuration; +	unsigned int	cmu_clkstop_wcore_status; +	unsigned int	cmu_clkstop_wcore_option; +	unsigned char	res151[0x14]; +	unsigned int	cmu_sysclk_toppwr_configuration; +	unsigned int	cmu_sysclk_toppwr_status; +	unsigned int	cmu_sysclk_toppwr_option; +	unsigned char	res920[0x18]; +	unsigned int	cmu_sysclk_gscl_status; +	unsigned int	cmu_sysclk_gscl_option; +	unsigned char	res152[0x18]; +	unsigned int	cmu_sysclk_isp_status; +	unsigned int	cmu_sysclk_isp_option; +	unsigned char	res153[0x38]; +	unsigned int	cmu_sysclk_mfc_status; +	unsigned int	cmu_sysclk_mfc_option; +	unsigned char	res154[0x18]; +	unsigned int	cmu_sysclk_g3d_status; +	unsigned int	cmu_sysclk_g3d_option; +	unsigned char	res155[0x38]; +	unsigned int	cmu_sysclk_disp1_status; +	unsigned int	cmu_sysclk_disp1_option; +	unsigned char	res156[0x18]; +	unsigned int	cmu_sysclk_mau_status; +	unsigned int	cmu_sysclk_mau_option; +	unsigned char	res814[0x18]; +	unsigned int	cmu_sysclk_g2d_status; +	unsigned int	cmu_sysclk_g2d_option; +	unsigned char	res815[0x18]; +	unsigned int	cmu_sysclk_msc_status; +	unsigned int	cmu_sysclk_msc_option; +	unsigned char	res922[0x18]; +	unsigned int	cmu_sysclk_fsys_status; +	unsigned int	cmu_sysclk_fsys_option; +	unsigned char	res816[0x18]; +	unsigned int	cmu_sysclk_fsys2_status; +	unsigned int	cmu_sysclk_fsys2_option; +	unsigned char	res817[0x18]; +	unsigned int	cmu_sysclk_psgen_status; +	unsigned int	cmu_sysclk_psgen_option; +	unsigned char	res950[0x18]; +	unsigned int	cmu_sysclk_peric_status; +	unsigned int	cmu_sysclk_peric_option; +	unsigned char	res818[0x18]; +	unsigned int	cmu_sysclk_wcore_status; +	unsigned int	cmu_sysclk_wcore_option; +	unsigned char	res819[0x18]; +	unsigned int	cmu_sysclk_coreblk_toppwr_status; +	unsigned int	cmu_sysclk_coreblk_toppwr_option; +	unsigned char	res157[0x414]; +	unsigned int	cmu_reset_gscl_configuration; +	unsigned int	cmu_reset_gscl_status; +	unsigned int	cmu_reset_gscl_option; +	unsigned char	res158[0x14]; +	unsigned int	cmu_reset_isp_configuration; +	unsigned int	cmu_reset_isp_status; +	unsigned int	cmu_reset_isp_option; +	unsigned char	res159[0x34]; +	unsigned int	cmu_reset_mfc_configuration; +	unsigned int	cmu_reset_mfc_status; +	unsigned int	cmu_reset_mfc_option; +	unsigned char	res160[0x14]; +	unsigned int	cmu_reset_g3d_configuration; +	unsigned int	cmu_reset_g3d_status; +	unsigned int	cmu_reset_g3d_option; +	unsigned char	res161[0x34]; +	unsigned int	cmu_reset_disp1_configuration; +	unsigned int	cmu_reset_disp1_status; +	unsigned int	cmu_reset_disp1_option; +	unsigned char	res162[0x14]; +	unsigned int	cmu_reset_mau_configuration; +	unsigned int	cmu_reset_mau_status; +	unsigned int	cmu_reset_mau_option; +	unsigned char	res163[0x14]; +	unsigned int	version_info; +	unsigned int	i2s_bypass; +	unsigned int	kfc_swreset_mask_from_eagle; +	unsigned char	res164[0xf4]; +	unsigned int	cmu_reset_g2d_configuration; +	unsigned int	cmu_reset_g2d_status; +	unsigned int	cmu_reset_g2d_option; +	unsigned char	res165[0x14]; +	unsigned int	cmu_reset_msc_configuration; +	unsigned int	cmu_reset_msc_status; +	unsigned int	cmu_reset_msc_option; +	unsigned char	res166[0x14]; +	unsigned int	cmu_reset_fsys_configuration; +	unsigned int	cmu_reset_fsys_status; +	unsigned int	cmu_reset_fsys_option; +	unsigned char	res167[0x14]; +	unsigned int	cmu_reset_fsys2_configuration; +	unsigned int	cmu_reset_fsys2_status; +	unsigned int	cmu_reset_fsys2_option; +	unsigned char	res168[0x14]; +	unsigned int	cmu_reset_psgen_configuration; +	unsigned int	cmu_reset_psgen_status; +	unsigned int	cmu_reset_psgen_option; +	unsigned char	res169[0x14]; +	unsigned int	cmu_reset_peric_configuration; +	unsigned int	cmu_reset_peric_status; +	unsigned int	cmu_reset_peric_option; +	unsigned char	res170[0x14]; +	unsigned int	cmu_reset_wcore_configuration; +	unsigned int	cmu_reset_wcore_status; +	unsigned int	cmu_reset_wcore_option; +};  #endif	/* __ASSEMBLY__ */  void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable); |