diff options
Diffstat (limited to 'arch/ppc/cpu/mpc8260/serial_smc.c')
| -rw-r--r-- | arch/ppc/cpu/mpc8260/serial_smc.c | 467 |
1 files changed, 467 insertions, 0 deletions
diff --git a/arch/ppc/cpu/mpc8260/serial_smc.c b/arch/ppc/cpu/mpc8260/serial_smc.c new file mode 100644 index 000000000..fbb3fb042 --- /dev/null +++ b/arch/ppc/cpu/mpc8260/serial_smc.c @@ -0,0 +1,467 @@ +/* + * (C) Copyright 2000, 2001, 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with + * changes based on the file arch/ppc/mbxboot/m8260_tty.c from the + * Linux/PPC sources (m8260_tty.c had no copyright info in it). + */ + +/* + * Minimal serial functions needed to use one of the SMC ports + * as serial console interface. + */ + +#include <common.h> +#include <mpc8260.h> +#include <asm/cpm_8260.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CONS_ON_SMC) + +#if CONFIG_CONS_INDEX == 1 /* Console on SMC1 */ + +#define SMC_INDEX 0 +#define PROFF_SMC_BASE PROFF_SMC1_BASE +#define PROFF_SMC PROFF_SMC1 +#define CPM_CR_SMC_PAGE CPM_CR_SMC1_PAGE +#define CPM_CR_SMC_SBLOCK CPM_CR_SMC1_SBLOCK +#define CMXSMR_MASK (CMXSMR_SMC1|CMXSMR_SMC1CS_MSK) +#define CMXSMR_VALUE CMXSMR_SMC1CS_BRG7 + +#elif CONFIG_CONS_INDEX == 2 /* Console on SMC2 */ + +#define SMC_INDEX 1 +#define PROFF_SMC_BASE PROFF_SMC2_BASE +#define PROFF_SMC PROFF_SMC2 +#define CPM_CR_SMC_PAGE CPM_CR_SMC2_PAGE +#define CPM_CR_SMC_SBLOCK CPM_CR_SMC2_SBLOCK +#define CMXSMR_MASK (CMXSMR_SMC2|CMXSMR_SMC2CS_MSK) +#define CMXSMR_VALUE CMXSMR_SMC2CS_BRG8 + +#else + +#error "console not correctly defined" + +#endif + +#if !defined(CONFIG_SYS_SMC_RXBUFLEN) +#define CONFIG_SYS_SMC_RXBUFLEN 1 +#define CONFIG_SYS_MAXIDLE 0 +#else +#if !defined(CONFIG_SYS_MAXIDLE) +#error "you must define CONFIG_SYS_MAXIDLE" +#endif +#endif + +typedef volatile struct serialbuffer { + cbd_t rxbd; /* Rx BD */ + cbd_t txbd; /* Tx BD */ + uint rxindex; /* index for next character to read */ + volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */ + volatile uchar txbuf; /* tx buffers */ +} serialbuffer_t; + +/* map rs_table index to baud rate generator index */ +static unsigned char brg_map[] = { + 6, /* BRG7 for SMC1 */ + 7, /* BRG8 for SMC2 */ + 0, /* BRG1 for SCC1 */ + 1, /* BRG1 for SCC2 */ + 2, /* BRG1 for SCC3 */ + 3, /* BRG1 for SCC4 */ +}; + +int serial_init (void) +{ + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + volatile smc_t *sp; + volatile smc_uart_t *up; + volatile cpm8260_t *cp = &(im->im_cpm); + uint dpaddr; + volatile serialbuffer_t *rtx; + + /* initialize pointers to SMC */ + + sp = (smc_t *) &(im->im_smc[SMC_INDEX]); + *(ushort *)(&im->im_dprambase[PROFF_SMC_BASE]) = PROFF_SMC; + up = (smc_uart_t *)&im->im_dprambase[PROFF_SMC]; + + /* Disable transmitter/receiver. */ + sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + + /* NOTE: I/O port pins are set up via the iop_conf_tab[] table */ + + /* Allocate space for two buffer descriptors in the DP ram. + * damm: allocating space after the two buffers for rx/tx data + */ + + /* allocate size of struct serialbuffer with bd rx/tx, + * buffer rx/tx and rx index + */ + dpaddr = m8260_cpm_dpalloc((sizeof(serialbuffer_t)), 16); + + rtx = (serialbuffer_t *)&im->im_dprambase[dpaddr]; + + /* Set the physical address of the host memory buffers in + * the buffer descriptors. + */ + rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf; + rtx->rxbd.cbd_sc = 0; + + rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf; + rtx->txbd.cbd_sc = 0; + + /* Set up the uart parameters in the parameter ram. */ + up->smc_rbase = dpaddr; + up->smc_tbase = dpaddr+sizeof(cbd_t); + up->smc_rfcr = CPMFCR_EB; + up->smc_tfcr = CPMFCR_EB; + up->smc_brklen = 0; + up->smc_brkec = 0; + up->smc_brkcr = 0; + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; + + /* Mask all interrupts and remove anything pending. */ + sp->smc_smcm = 0; + sp->smc_smce = 0xff; + + /* put the SMC channel into NMSI (non multiplexd serial interface) + * mode and wire either BRG7 to SMC1 or BRG8 to SMC2 (15-17). + */ + im->im_cpmux.cmx_smr = (im->im_cpmux.cmx_smr&~CMXSMR_MASK)|CMXSMR_VALUE; + + /* Set up the baud rate generator. */ + serial_setbrg (); + + /* Make the first buffer the only buffer. */ + rtx->txbd.cbd_sc |= BD_SC_WRAP; + rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; + + /* single/multi character receive. */ + up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN; + up->smc_maxidl = CONFIG_SYS_MAXIDLE; + rtx->rxindex = 0; + + /* Initialize Tx/Rx parameters. */ + + while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ + ; + + cp->cp_cpcr = mk_cr_cmd(CPM_CR_SMC_PAGE, CPM_CR_SMC_SBLOCK, + 0, CPM_CR_INIT_TRX) | CPM_CR_FLG; + + while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ + ; + + /* Enable transmitter/receiver. */ + sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; + + return (0); +} + +void +serial_setbrg (void) +{ +#if defined(CONFIG_CONS_USE_EXTC) + m8260_cpm_extcbrg(brg_map[SMC_INDEX], gd->baudrate, + CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL); +#else + m8260_cpm_setbrg(brg_map[SMC_INDEX], gd->baudrate); +#endif +} + +void +serial_putc(const char c) +{ + volatile smc_uart_t *up; + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + volatile serialbuffer_t *rtx; + + if (c == '\n') + serial_putc ('\r'); + + up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]); + + rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase]; + + /* Wait for last character to go. */ + while (rtx->txbd.cbd_sc & BD_SC_READY & BD_SC_READY) + ; + rtx->txbuf = c; + rtx->txbd.cbd_datlen = 1; + rtx->txbd.cbd_sc |= BD_SC_READY; +} + +void +serial_puts (const char *s) +{ + while (*s) { + serial_putc (*s++); + } +} + +int +serial_getc(void) +{ + volatile smc_uart_t *up; + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + volatile serialbuffer_t *rtx; + unsigned char c; + + up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]); + + rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase]; + + /* Wait for character to show up. */ + while (rtx->rxbd.cbd_sc & BD_SC_EMPTY) + ; + + /* the characters are read one by one, + * use the rxindex to know the next char to deliver + */ + c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr + rtx->rxindex); + rtx->rxindex++; + + /* check if all char are readout, then make prepare for next receive */ + if (rtx->rxindex >= rtx->rxbd.cbd_datlen) { + rtx->rxindex = 0; + rtx->rxbd.cbd_sc |= BD_SC_EMPTY; + } + return(c); +} + +int +serial_tstc() +{ + volatile smc_uart_t *up; + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + volatile serialbuffer_t *rtx; + + up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]); + rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase]; + + return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY); +} + +#endif /* CONFIG_CONS_ON_SMC */ + +#if defined(CONFIG_KGDB_ON_SMC) + +#if defined(CONFIG_CONS_ON_SMC) && CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX +#error Whoops! serial console and kgdb are on the same smc serial port +#endif + +#if CONFIG_KGDB_INDEX == 1 /* KGDB Port on SMC1 */ + +#define KGDB_SMC_INDEX 0 +#define KGDB_PROFF_SMC_BASE PROFF_SMC1_BASE +#define KGDB_PROFF_SMC PROFF_SMC1 +#define KGDB_CPM_CR_SMC_PAGE CPM_CR_SMC1_PAGE +#define KGDB_CPM_CR_SMC_SBLOCK CPM_CR_SMC1_SBLOCK +#define KGDB_CMXSMR_MASK (CMXSMR_SMC1|CMXSMR_SMC1CS_MSK) +#define KGDB_CMXSMR_VALUE CMXSMR_SMC1CS_BRG7 + +#elif CONFIG_KGDB_INDEX == 2 /* KGDB Port on SMC2 */ + +#define KGDB_SMC_INDEX 1 +#define KGDB_PROFF_SMC_BASE PROFF_SMC2_BASE +#define KGDB_PROFF_SMC PROFF_SMC2 +#define KGDB_CPM_CR_SMC_PAGE CPM_CR_SMC2_PAGE +#define KGDB_CPM_CR_SMC_SBLOCK CPM_CR_SMC2_SBLOCK +#define KGDB_CMXSMR_MASK (CMXSMR_SMC2|CMXSMR_SMC2CS_MSK) +#define KGDB_CMXSMR_VALUE CMXSMR_SMC2CS_BRG8 + +#else + +#error "console not correctly defined" + +#endif + +void +kgdb_serial_init (void) +{ + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + volatile smc_t *sp; + volatile smc_uart_t *up; + volatile cbd_t *tbdf, *rbdf; + volatile cpm8260_t *cp = &(im->im_cpm); + uint dpaddr, speed = CONFIG_KGDB_BAUDRATE; + char *s, *e; + + if ((s = getenv("kgdbrate")) != NULL && *s != '\0') { + ulong rate = simple_strtoul(s, &e, 10); + if (e > s && *e == '\0') + speed = rate; + } + + /* initialize pointers to SMC */ + + sp = (smc_t *) &(im->im_smc[KGDB_SMC_INDEX]); + *(ushort *)(&im->im_dprambase[KGDB_PROFF_SMC_BASE]) = KGDB_PROFF_SMC; + up = (smc_uart_t *)&im->im_dprambase[KGDB_PROFF_SMC]; + + /* Disable transmitter/receiver. */ + sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + + /* NOTE: I/O port pins are set up via the iop_conf_tab[] table */ + + /* Allocate space for two buffer descriptors in the DP ram. + * damm: allocating space after the two buffers for rx/tx data + */ + + dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16); + + /* Set the physical address of the host memory buffers in + * the buffer descriptors. + */ + rbdf = (cbd_t *)&im->im_dprambase[dpaddr]; + rbdf->cbd_bufaddr = (uint) (rbdf+2); + rbdf->cbd_sc = 0; + tbdf = rbdf + 1; + tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1; + tbdf->cbd_sc = 0; + + /* Set up the uart parameters in the parameter ram. */ + up->smc_rbase = dpaddr; + up->smc_tbase = dpaddr+sizeof(cbd_t); + up->smc_rfcr = CPMFCR_EB; + up->smc_tfcr = CPMFCR_EB; + up->smc_brklen = 0; + up->smc_brkec = 0; + up->smc_brkcr = 0; + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; + + /* Mask all interrupts and remove anything pending. */ + sp->smc_smcm = 0; + sp->smc_smce = 0xff; + + /* put the SMC channel into NMSI (non multiplexd serial interface) + * mode and wire either BRG7 to SMC1 or BRG8 to SMC2 (15-17). + */ + im->im_cpmux.cmx_smr = + (im->im_cpmux.cmx_smr & ~KGDB_CMXSMR_MASK) | KGDB_CMXSMR_VALUE; + + /* Set up the baud rate generator. */ +#if defined(CONFIG_KGDB_USE_EXTC) + m8260_cpm_extcbrg(brg_map[KGDB_SMC_INDEX], speed, + CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL); +#else + m8260_cpm_setbrg(brg_map[KGDB_SMC_INDEX], speed); +#endif + + /* Make the first buffer the only buffer. */ + tbdf->cbd_sc |= BD_SC_WRAP; + rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; + + /* Single character receive. */ + up->smc_mrblr = 1; + up->smc_maxidl = 0; + + /* Initialize Tx/Rx parameters. */ + + while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ + ; + + cp->cp_cpcr = mk_cr_cmd(KGDB_CPM_CR_SMC_PAGE, KGDB_CPM_CR_SMC_SBLOCK, + 0, CPM_CR_INIT_TRX) | CPM_CR_FLG; + + while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ + ; + + /* Enable transmitter/receiver. */ + sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; + + printf("SMC%d at %dbps ", CONFIG_KGDB_INDEX, speed); +} + +void +putDebugChar(const char c) +{ + volatile cbd_t *tbdf; + volatile char *buf; + volatile smc_uart_t *up; + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + + if (c == '\n') + putDebugChar ('\r'); + + up = (smc_uart_t *)&(im->im_dprambase[KGDB_PROFF_SMC]); + + tbdf = (cbd_t *)&im->im_dprambase[up->smc_tbase]; + + /* Wait for last character to go. */ + buf = (char *)tbdf->cbd_bufaddr; + while (tbdf->cbd_sc & BD_SC_READY) + ; + + *buf = c; + tbdf->cbd_datlen = 1; + tbdf->cbd_sc |= BD_SC_READY; +} + +void +putDebugStr (const char *s) +{ + while (*s) { + putDebugChar (*s++); + } +} + +int +getDebugChar(void) +{ + volatile cbd_t *rbdf; + volatile unsigned char *buf; + volatile smc_uart_t *up; + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + unsigned char c; + + up = (smc_uart_t *)&(im->im_dprambase[KGDB_PROFF_SMC]); + + rbdf = (cbd_t *)&im->im_dprambase[up->smc_rbase]; + + /* Wait for character to show up. */ + buf = (unsigned char *)rbdf->cbd_bufaddr; + while (rbdf->cbd_sc & BD_SC_EMPTY) + ; + c = *buf; + rbdf->cbd_sc |= BD_SC_EMPTY; + + return(c); +} + +void +kgdb_interruptible(int yes) +{ + return; +} + +#endif /* CONFIG_KGDB_ON_SMC */ |